Instead of an explicit tablet mode that device must be changed into, let the
caller decide which coordinates are preferred. The tablet mode may be
application-specific and usually depends on the tool as well.
This patch adds an interface to get a motion delta for the x/y axes in
pixel-like coordinates. libinput provides some magic to convert the tablet
data into something that resembles pixels from a mouse motion.
For unaccelerated relative motion, the caller should use the mm values from
the tablet and calculate deltas manually.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jason Gerecke <jason.gerecke@wacom.com>
Makes the code less generic, but more expressive. No visible functional
changes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jason Gerecke <jason.gerecke@wacom.com>
There's no reason to prevent this for button events. Unlike the pointer
which is a relative device a tablet is (usually) a device with a lot of state.
Caller code that handles axes is likely shared between the various events,
treating button events separately here doesn't get us any benefit.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jason Gerecke <jason.gerecke@wacom.com>
When three fingers are set down on the touchpad, one finger tends to get a 0/0
coordinate, triggering palm detection in the upper left corner. Handle this
like the jumping semi-mt touchpads and disable MT handling and instead
just rely on the x/y axis and the BTN_TOOL_* events.
https://bugs.freedesktop.org/show_bug.cgi?id=93583
This kernel patch is required:
https://lkml.org/lkml/2016/1/11/171
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
A fake MT device may have ABS_MT_POSITION_X but not Y. In this case we don't
care, because we don't handle those axes anyway.
http://bugs.freedesktop.org/show_bug.cgi?id=93474
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
When we're only dealing with BTN_TOUCH we can make the tip event independent
of the axis event. Now that we handle pressure thresholds to trigger tip state
this does not work, we'd have to send an axis event with the new pressure and
then a tip event. Since the pressure triggers the tip event this seems
disconnected.
Make the tip event officially capable of carrying axes. A caller can then
decide how to forward this to the next layer.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jason Gerecke <jason.gerecke@wacom.com>
On tablets with ABS_PRESSURE use a pressure value to determine tip state, not
BTN_TOUCH. This enables us (down the road) to have device-specific pressure
thresholds. For now we use a 5% default for all devices.
The threshold is a range, if we go past the upper range we initiate the tip
down, if we go below the lower range we release the tip again.
This affects two current tests:
* Once we have pressure offsets and pressure thresholds, we're biased towards
pressure. So we can only check that distance is zero when there is a pressure
value, not the other way round.
* When the pressure threshold is exceeded on proximity in with a nonzero
distance, we can only warn and handle the pressure as normal. Since this is a
niche case anyway anything fancier is likely unnecessary.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jason Gerecke <jason.gerecke@wacom.com>
Label internal keyboards through the udev hwdb and only pair the internal
(usb) Apple touchpads with those keyboards labelled as such.
https://bugs.freedesktop.org/show_bug.cgi?id=93367
Co-authored-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Makes it even longer, but at least it's consistent with button and key state.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Print the type of event when it is queued up internally. This makes it a lot
easier to associate evdev events with the libinput event queued up and does
not depend on the caller calling libinput_dispatch().
Since this should only be used during development, hide it behind an if 0.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For the puck/lens cursor tool we need to artificially reduce proximity
detection. These tools are usually used in a relative mode (i.e. like a mouse)
and thus require lifting and resetting the tool multiple times to move across
the screen. The tablets' distance detection goes too far, requiring the user
to lift the device several cm on every move. This is uncomfortable.
Introduce an artificial distance threshold for the devices with the default
value taken from the X.Org wacom driver. If a tool is in proximity but outside
of this range, fake proximity events accordingly.
If a button was pressed while we were out of range we discard that event and
send it later when we enter proximity again.
This is the simple implementation that only takes one proximity out value (the
one from the wacom driver) and applies it to all. Those devices that support a
button/lens tool and have a different default threshold are well out of date.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
[rebased, tests updated for new axis percentage behavior (8d76734f)]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For checking if a tablet tool can be uniquely identified by libinput. In
practice this means checking for a nonzero serial number, but let's not
restrict ourselves to allowing just that.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The only time we need this is on proximity in, so move it to where we handle
that to have better locality. And rather than looping through and checking
each bit, just memcpy the axis capabilities, because by definition they
represent the set of axes that can possibly change.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This will be set when the tool comes into proximity later.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Now that we don't provide an API anymore to access the absolute value of the
wheel and the axes are handled separately, we can safely store the wheel delta
in the normal axis array.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
We know when one of the bits is set we need to send an event
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
We know when one of the bits is set we need to send an event
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Process the axes explicitly, rather than having a loop that needs special
casing for most axes anyway. And since we do the axes one-by-one, we can use
the evdev axis code directly rather than the axis_to_evcode helper.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The wheel is the only one axis that has actual deltas, all others have
straightforward deltas that we don't need to care about, the caller can
calculate those where needed.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Only the wheel has a discrete value, no need to keep arrays for a single
value.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Internally we still use it, at least for now.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude <cpaul@redhat.com>
Part of the big revamp to get rid of libinput_tablet_tool_axis and
replace it with a set of axis-specific APIs.
Only the rel wheel has true delta events, everything else is a delta
calculated by libinput based on the previous position. Since we supply that
position to the callers anyway, they can determine that delta themselves
where needed.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude <cpaul@redhat.com>
Part of the big revamp to get rid of libinput_tablet_tool_axis and
replace it with a set of axis-specific APIs.
Note that this commit drops the ability to check whether a tablet has an x or
y axis. If it doesn't, libinput won't initialize the tablet anyway so this was
superfluous already.
Likewise with the tilt axes - either we have x and y tilt or we have neither,
so separate checks for tilt_x and tilt_y is unnecessary.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude <cpaul@redhat.com>
Second part of the big revamp to get rid of libinput_tablet_tool_axis and
replace it with a set of axis-specific APIs.
Note that this commit drops the ability to get the absolute value from a
relative wheel. The previous API always returned 0 for this case, it is not
needed anymore.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude <cpaul@redhat.com>
First part of the big revamp to get rid of libinput_tablet_tool_axis and
replace it with a set of axis-specific APIs.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude <cpaul@redhat.com>
open_restricted() doesn't always mean 'open the fd'. When the X server uses
systemd-logind, the fd is opened once before PreInit and then kept open across
devices being disabled and enabled through the protocol.
When the device is re-enabled and libinput_path_add_device is called for the
device, we may have events pending on the fd, leaking information that we
should just ignore.
There's also the potential of inconsistent state. The kernel updates the
device state whenever it processes an event, the evdev ioctls return that
state. If events are pending, the state we see is newer than the events we
process immediately after initialization. That can lead to confusion.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
If a tool wears out, it may have a pre-loaded pressure offset. In that case,
even when the tool is not physically in contact with the tablet surface it
will send pressure events.
Use automatic pressure offset detection, similar to what the X.Org wacom
driver does. On proximity-in, check the pressure and if the distance is above
50% of the range and the pressure is nonzero but below 20% of the range, use
that value as pressure offset.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Ping Cheng <pingc@wacom.com>
