Some devices might announce support for high-resolution scroll wheel
by enabling REL_WHEEL_HI_RES and/or REL_HWHEEL_HI_RES but never send
a high-resolution scroll event.
When the first low-resolution scroll event is received without any
previous high-resolution event, print a kernel bug warning and start
emulating high-resolution scroll events.
Fix#668
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Later versions of this same model seem to have a different ALPS touchpad
and don't need the pressure settings. Narrow down this match so we only
apply to the one from the actual bug report in #565.
Fixes#676
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
LIBINPUT_EVENT_GESTURE_HOLD_BEGIN and LIBINPUT_EVENT_GESTURE_HOLD_END
were missing from libinput_event_gesture_get_base_event.
Add them to avoid triggering an erroneous client bug warning.
Fix#671
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
When required, invert horizontal scrolling in evdev_notify_axis_wheel
following the QUIRK_MODEL_INVERT_HORIZONTAL_SCROLLING quirk.
Fix#669
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
External touchpads using USB are vanishingly few, built-in touchpads
that use USB are comparatively common. So let's default to internal,
for vendors like Logitech and Wacom that only make external touchpads we
have special conditions in place anyway.
Fixes#664
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
When pairing a trackpoint, use the model flags for the touchpad, don't
use a separate set of conditions.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
GTK handles LIBINPUT_EVENT_POINTER_SCROLL_CONTINUOUS as
GDK_SCROLL_SMOOTH, the same event type that is used to handle
LIBINPUT_EVENT_POINTER_SCROLL_FINGER.
Because Mutter and other compositors, like wlroots based compositors,
translate libinput terminating event to axis_stop instead of doing their
own emulation, if libinput stops sending terminating events, it will
cause client bugs.
Since libinput always sends the terminating event for trackpoints and
button scrolling and there are even tests in place to check for them,
update the documentation to guarantee the terminating scroll sequence.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
It's been a while since we really could do something about those jumps,
so let's assume most of these are informative and not a bug in libinput.
For that let's not spam the user's journal and ratelimit it to a handful
a day.
Per day because that increases the chance of an error being present in
the recent logs if the user does search for it.
Related #663
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a touchpad is removed before its dwt-paired keyboard, we're leaking
the keyboard struct. Fix this by cleaning up properly when our device is
removed.
This is the cause of many failed tests in the udev backend tests during
the CI valgrind run. Because we're testing the udev backend it will add
any devices created by tests run in parallel, some of which are keyboard
devices. Depening on the test completions, the keyboards may or may not
get removed before this device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
When the kernel doesn't support a touchpad, the device is handled as a
generic mouse named "ImPS/2 Generic Wheel Mouse".
Taps are handled as button clicks and the button debouncing code makes
it difficult to double click.
Add a quirk to disable button debouncing for this devices.
Fix https://gitlab.freedesktop.org/libinput/libinput/-/issues/656
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Move the logic used to parse boolean quirks and udev flags to a common
function in utils.
Refactor, no functional changes.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Starting with kernel v5.0 two new axes are available for high-resolution wheel
scrolling: REL_WHEEL_HI_RES and REL_HWHEEL_HI_RES. Both axes send data in
fractions of 120 where each multiple of 120 amounts to one logical scroll
event. Fractions of 120 indicate a wheel movement less than one detent.
This commit adds a new API for scroll events. Three new event types that encode
the axis source in the event type name and a new API to get a normalized-to-120
value that also used by Windows and the kernel (each multiple of 120 represents
a logical scroll click).
This addresses a main shortcoming with the existing API - it was unreliable to
calculate the click angle based on the axis value+discrete events and thus any
caller using the axis value alone would be left with some ambiguity. With the
v120 API it's now possible to (usually) calculate the click angle, but more
importantly it provides the simplest hw-independent way of scrolling by a
click or a fraction of a click.
A new event type is required, the only way to integrate the v120 value
otherwise was to start sending events with a discrete value of 0. This
would break existing xf86-input-libinput (divide by zero, fixed in 0.28.2) and
weston (general confusion). mutter, kwin are unaffected.
With the new API, the old POINTER_AXIS event are deprecated - callers should use
the new API where available and discard any POINTER_AXIS events.
Notable: REL_WHEEL/REL_HWHEEL are emulated by the kernel but there's no
guarantee that they'll come every accumulated 120 values, e.g. Logitech mice
often send events that don't add up to 120 per detent.
We use the kernel's wheel click emulation instead of doing our own.
libinput guarantees high-resolution events even on pre-5.0 kernels.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Extract the logic in litest_assert_event_type to a generic function,
litest_assert_event_type_is_one_of, that takes a variable number of
expected event types.
Refactor, no functional changes.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Set multiplier for T470 to 0.4, same as for T480.
Trackpoint behavior on T470 was good before 1.9.0 (more precisely,
before the commit 87b568) when a new trackpoint acceleration algorithm
was introduced instead of the traditional linear filter. Since then
it is too sensitive and seems impossible to fine-tune using hw settings
or libinput accel speed setting.
With multiplier set to 0.4 it is as good (or better) as in 1.8.4.
Sensitivity feels the same as in 1.8.4 with the same hw settings for
speed and sensitivity.
Signed-off-by: Dmitry Maluka <dmitrymaluka@gmail.com>
The device sends its own scroll events when its trackpoint is moved
while the middle button is pressed.
Because scroll events are inhibited while the middle button is pressed
a quirk is necessary for this device to not inhibit scroll events.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
This way we can ensure that at least one device is available, and that
it is the device we want.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
meson uses MESON_TESTTHREADS to determine the number of parallel test
jobs. Since our main test suite cannot be run in parallel anyway, use
that same variable in litest to determine how many jobs we should fork
off.
In the CI pipeline, we can use FDO_CI_CONCURRENT to pass that down so we
don't end up running a billion jobs on a test runner.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Starting with meson v0.49.0, the "/" operator can be used instead of
join_paths.
Update meson to v0.49.0 and remove all calls to join_paths.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Update GTK to version 4 on Fedora, Arch and Alpine Linux.
Not updating Debian and FreeBSD because the package is not available yet
and Ubuntu because it is not available on 20.10.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Move the code used to pace the different UI elements to its own
function.
Refactor, no functional changes.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
This does little other than drag in a whole bunch of dependencies. The
libinput documentation is designed to be consumed online, so there's no
need building it on every machine.
We leave the dependencies installed in the images because it's a lot
easier to remove them and test if the build still works than adding them
and dragging in every updated package since we built the image.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Add a section in the contributing documentation with common pipeline
errors and how to fix them and point to this page when the CI fails.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
None of our jobs rely on the artifacts of a previous job, so let's not
pass those around. Make this part of the default policy and include it
from every job.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/512 disables
input smoothing for AES devices. However, some AES devices produce
segmented/wobbly curves without smoothing. This change introduces an
`AttrTabletSmoothing` boolean property, which overrides the default smoothing
behavior.
See #632
Signed-off-by: Quytelda Kahja <quytelda@tamalin.org>
Squashes compiler warnings about unused functions given this header is
included in multiple files.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Replace our cross-compilation for FreeBSD with a proper template.
FreeBSD doesn't do normal containers so we need a bunch of if/else to
skip the container builds.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Should have been part of 9133693b15.
This fixes an issue with calls to meson_build.sh with an otherwise empty
MESON_TEST_ARGS - thanks to the space before $SUITES it would no longer
the zero-string condition in meson_build.sh.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This was part of the test-suite-vm template but to make it easily
re-usable split out the parts that are just about building in a qemu
image from the parts that are specific to running the test suites.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Having only one qemu tag worked only because we only had one
distribution using qemu. If we have multiple of those we just
duplicate/overwrite the variable so let's not do that.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
