litest_add_ranged* takes a range parameter that serves as the lower/upper
boundary for a loop. This enables tests to be run multiple times, avoiding the
timeouts we triggered by having the loops inside (e.g. see 2bf8d035c and
6dd02468).
This just wraps the underlying check framework, the ranged variable is
available as "_i" in the test.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
When the device supports true hovering, it reports this
information through ABS_MT_DISTANCE.
When this axis is available, we should rely on it to
(un)hover the touches as BTN_TOUCH is most of the time
unreliable (generated by the mouse emulation in the kernel).
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Prep work for the upcoming patch to extend the timeout for tap-and-drag. And
switch the tests that rely on it over to the new function.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If we have a middle button but no wheels, enable on-button scrolling for the
middle button by default. This applies e.g. to the Logitech trackball added as
new test device here.
This makes the separate check for POINTINGSTICK obsolete but I'd rather leave
this in to be more explicit about it.
https://bugs.freedesktop.org/show_bug.cgi?id=90208
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This is sort-of legitimate, so simply disable the axes and continue.
Any real axis we require to have a real range.
https://bugs.freedesktop.org/show_bug.cgi?id=90090
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Makes it easier from a caller to check for common things without all the other
boilerplate code.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This is just the required framework, it's not hooked up to anything just yet.
Hooking it up comes as separate commit to better detail why/when a device
supports emulation.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This currently requires a specific udev rule to tag the device, once the
matching bits are upstream we can drop this.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This device has a couple of axes (fake MT) and a wheel. The device itself
exports 4 nodes, this device is the second node, the most problematic one.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The helper function now prints an error message if the event type passed is
not allowed.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Currently all the touchpad 2fg tests move the 2 fingers 1 at a time,
causing a finger motion which looks more like a pinch zoom in followed by
a zoom out than an actual 2fg scroll gesture. Add a helper function which
can move 2 fingers at the same time (more or less), and use this where
relevant.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The previous setting of 10 wasn't 10 mm, it was used against the deltas
normalized to a 1000DPI mouse, i.e. closer to 4mm. It was also also per-event,
so a slow movement or a high-frequency touchpad can struggle to meet the
threshold.
Change the trigger to be ~5 mm from the initial touch down, accumulated until
we either meet the threshold or the timeout expires. The first scroll event
includes the delta since the touch down rather than the most recent delta.
This removes the delay otherwise seen in scrolling and makes the scroll motion
match the finger motion. This accumulated delta only applies when exceeding
the motion threshold, when the timeout triggers the switch to scrolling the
first delta posted is the current delta.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Works as a touchpad but has no buttons.
Minor change to one of the touchpad tests: because the touch area is so big
the slow-scrolling trigger needs to be adjusted.
And because the device is an external device, the "disable on external mouse"
test needs to be adjusted.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Handle everything which is not handled by the tap, (soft)button or edge-scroll
code/statemachines in a unified way. Everything is treated as a X-finger
gesture now, and the action to take on finger movement is decided by
the gesture.finger_count setting. Pointer control now simply is seen as a
1 finger gesture, and 2fg scrolling as a 2fg gesture.
This removed the need for special-casing things like switching back to
pointer mode when lifting a finger in 2fg scrolling mode, and also lays the
groundwork for adding 3+ fg gesture support.
Note that 1 test-case needs to be updated to wait for the finger mode
switching when switching mode while a gesture has already been started.
This is actually an improvement as this stops sending spurious pointer
motion events at the end of 2fg scrolling when not lifting both fingers at
exactly the same time.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Don't rely on a magic version tag, instead let a device define a udev rule and
drop that into the udev runtime directory before the device is created.
There are a couple of caveats with this approach: first, since this changes
system-wide state it may cause issues on the device the test suite is run on.
This can be avoided if the udev rules have filter patterns that ensure only
test devices are affected.
Second, the check test suite aborts but it doesn't run the teardown() function
if a test fails. So far this wasn't a problem since uinput devices disappear
whenever we exit. The rules files will hang around though, so an unchecked
fixture was added to delete all litest-foo.rules files before and after a test
case starts. Unchecked fixtures are run regardless of the exit status of the
test but run in the same address space - i.e. no ck_assert() usage.
Also unchecked fixtures are only run once per test-case, not once per test
function. For us, that means they're only run once per device (we use the
devices as test case), i.e. if a test fails and the udev rule isn't tidied up,
the next test may be unpredictable. This shouldn't matter too much though.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Notable: sends BTN_0/1/2 instead of the trackpoint
This device currently has the INPUT_PROP_TOPBUTTONPAD property set, kernel
patches [1] and [2] are pending to remove this. This test device already lacks
the property.
[1] https://patchwork.kernel.org/patch/5730371/
[2] https://patchwork.kernel.org/patch/5730451/
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This device sends touch information before BTN_TOUCH
https://bugs.freedesktop.org/show_bug.cgi?id=87197
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
An upcoming synaptics semi-mt device needs the same code.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
In a few tests we care about that a specific set of events are in the queue
but not about the details of the events (usually checked elsewhere). Instead
of manual loops, provide a helper function that also checks that there is at
least one of those events in the queue.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Turn test_trackpoint_scroll into a generic helper function for testing
"button scrolling".
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This doesn't test for direction only, it tests for the minimum distance we
expect in the scroll event. Rename accordingly.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Re-uses the touch_down interface for now, but requires the slot is always 0.
That's easier for now than adding a new interface for abs event, at least
until we have more than one device that needs it.
This device, along with a couple of similar ones have a tendency to break in
the X.Org stack without people noticing. They're special in that they have
absolute x/y axes but relative wheels. For libinput that's not as much of a
problem as it is in X but let's add them anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
In reality moving a touch from point to another takes time. In some cases
(when a timeout may trigger during the move, e.g. tap-n-drag on a touchpad),
this is important. Add a sleep_ms parameter, which will cause
litest_touch_move_to to sleep the specified amount of ms every step.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
In the device description, define the interfaces for touch down/move even
though we technically don't have those interfaces. Makes it easier to test.
The fake-mt tests make sure the device shows up correctly and that no touch
events are being sent for touch events.
This device is a pointer device too, the pointer tests will test it for
correct functionality of the REL_X/Y bits, no special test needed.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
For some tests we need to string multiple event sequences together into one
event frame. Use a push/pop frame approach that stops litest from sending any
EV_SYN/SYN_REPORT events, so we can merge two touches together by e.g.
litest_push_event_frame(d);
litest_touch_down(d, 0, 10, 10);
litest_touch_down(d, 1, 20, 50);
litest_pop_event_frame(d);
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Rather than a random msleep() with a comment, use a helper function that
describes what we're waiting for. Also makes changing the timeouts easier in
the future.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Make check_2fg_scroll functionality available outside of touchpad.c ,
no functional changes.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For adding a litest device to an existing context.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The litest features overlap with the litest device specifiers, so it's easy to
pass in LITEST_MOUSE where LITEST_POINTER should be passed in, and vice versa.
Lacking proper type checking the best we can do here is simply move the
devices into the negative range and check for that.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
With a non-zero absmin for both axes and different ranges for x/y, just to
detect those errors.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
litest_wait_for_event() returns if any event is available.
litest_wait_for_event_of_type(... type, type, type, -1) returns if any of the
given event types is availble. All other events are discarded.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Some tests in test/path.c and test/udev.c are not dependent on
device behaviour but rather managing of device lifetime etc. Run those
tests only once with only one device, resulting more or less the same
code coverage but shorter run time.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Provides the bounding box only, with slot 0 always being the upper/left, slot
1 being the lower-right touch. This needs to use the touch_down etc. litest
interfaces, which are now widened to double (leftover from 489630f58) and a
device-specific private pointer in the litest device.
New device feature for litest: LITEST_SEMI_MT
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Set BTN_TOUCH, BTN_TOOL_DOUBLETAP automatically depending on the number of
fingers down.
This emulates real event sequences a bit better than the current approach,
though it's not a 100% correct emulation:
1) On real devices, BTN_* are usually sent last before the SYN_REPORT - here
they are sent first to slot in with the custom, device-specific event
sequence. We should only ever look at the complete sequence anyway, so this
shouldn't matter.
2) On real devices, the switch from BTN_TOOL_DOUBLETAP to TRIPLETAP and vice
versa is not always toggled within the same SYN_REPORT
3) On synaptics devices, BTN_TOUCH is released in the frame where
BTN_TOOL_DOUBLETAP is set. It is then immediately set again in the next
frame. With the current litest framework this is hard to integrate, so we
just leave BTN_TOUCH set the whole time, which is what MT devices do if
they don't have BTN_TOOL_DOUBLETAP.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Using a 0-100% range is useful but in some cases we need events with finer
than 1% granularity.
And fix up the two-finger test that now fails. This was a bug in the test
anyway, the dx/dy supplied here was 1% of the touchpad width. Confined to
integers this meant we only ever had the touch down, then the single move by
1%. That caused two events - not enough to satisfy tp_estimate_delta, so we
always had a delta of 0/0 regardless of the size of the move.
Now with doubles this fails, so drop it to 0.1% instead, which is small enough
on all touchpads we currently have.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Mainly testing the behaviour when clicking during a tap or tap-n-drag. Adds a
new "feature" to the litest system, Apple clickpads don't have software
buttons by default.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
