A thumb may not move, but may change pressure so we need to process
accordingly.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Was assigned to -1 if no custom axes were provided.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
That's the most likely area it will be resting in, if it's sitting anywhere
above that it's likely part of an interaction.
A thumb in the lowest 15mm needs to trigger the pressure threshold before it's
labelled a thumb. A thumb in the lowest 8mm is considered a thumb if it
remains there for 300ms. Regardless of the pressure, since we can't reliably
get pressure here. If a thumb moves out of the area, or starts outside of that
area it is never a thumb.
If edge scrolling is enabled, the 8mm threshold is ineffective since we'll
have normal interaction in that zone for horizontal scrolling.
The thumb tests now require all touchpads to be switched to clickfinger, if we
test for thumb detection on the bottom of the pad we won't get expected
motion events due to the software button area.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
On touchpads with a higher resolution we also see higher pressure values.
Scale accordingly, but use the T440s as reference and don't go below that
device's threshold. A false positive is worse than a false negative when it
comes to thumb detection.
https://bugs.freedesktop.org/show_bug.cgi?id=91362
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The average human hand has four fingers but only one thumb, i.e. the chance of
a fake finger being close to the top-most touch is higher than to whatever the
first touch was (which may be a thumb at the bottom of the touchpad).
So search for the top-most real touch and copy its position into the fake
touches.
This also fixes another bug with the previous code - the first slot may not be
active but we still used its position for the fake touches. Whether that was
really triggerable is questionable though.
The test is only run for the T440 touchpad - we know it's big enough to
enable thumb detection and that way we don't have to double-check in the how
big the touchpad is, etc.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
We may have four fingers on the touchpad - three real ones + a thumb. Count it
as three-finger click then.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
If a thumb is resting with a three-finger click, that must be a middle-click.
And the odd case where we have a real four-finger click doesn't need worrying
about.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The use-case we have thumb detection for is to let a user rest a thumb on the
touchpad before clicking. On a touchpad with physical buttons, the thumb won't
be resting on the touchpad.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Gets a bit cramped if you're trying to rest the thumb on a touchpad that
small.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Regression introduced in 8302860.
Reading the DPI before evdev_configure_device makes it lose on the trackpoint
flag, causing libinput to ignore the POINTINGSTICK_CONST_ACCEL property.
8302860 moved it up so we can init accel based on the DPI, this patch simply
moves istart t before the acceleration is initialized.
https://bugs.freedesktop.org/show_bug.cgi?id=91369
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Removes some dead assignments, an unused function, and
uses %d format specifier for int.
Signed-off-by: Thomas Hindoe Paaboel Andersen <phomes@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
obsolete since 8658ff159d. And once we remove
that all we checkf or is Apple models which we set a resolution for in
systemd. So that check is obsolete now too.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Only keep those that we changed locally, which makes it much easier to detect
what we're actually changing.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Thumb detection interfered with gestures a fair bit but it shouldn't. A pinch
gesture with a thumb is a fairly natural move so we shouldn't cancel that.
A swipe gesture with a thumb on the touchpad - well, don't do that. No need
for code here.
Reported-by: Carlos Garnacho <carlosg@gnome.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
3finger swipe, pinch and spread. While we expect the pinch/spread to have a
zero angle, the discrete coordinates we use cause some angle, but below 1
degree.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For Elantech touchpads, we know that the resolution is 31u/mm (800dpi) for
v1-v3 firmware. Set this as a hint until we get either the kernel or systemd
to set this for us.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Now that we have all devices init a fixed resolution we don't need code to
handle custom cases anymore.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The previous approach of using the axis ranges and approximating parameters
based on the x/y axis range clutters up the code and is generally unreliable.
If we look at Synaptics touchpads, the resolution ranges from 42 to 130 while
the axes stay the same axis range. Other touchpads likely have a similar
variation across the various models.
Let's make this simpler in code: unless we know otherwise, simply assume a
default-sized touchpad.
Anything that deviates from that can be fixed with the new hwdb entries to
provide a more correct setting.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Some model-specific information isn't available through udev properties. This
callout is used to query the device directly and set a property that we can
then match on for the hwdb entries.
This is geared for Elantech and ALPS touchpads where the firmware version is
the interesting bit. The udev rule is added already to match on that, note
that the callout doesn't do anything at this point. The various
touchpad-related things will be added separately.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Touchpads, notably Elantech, ALPS and bcm5974 don't provide x/y resolution
until recent generations.
Add a new property, LIBINPUT_ATTR_SIZE_HINT, that provides size information to
libinput. Note that this property *does not* override true resolution values,
it is only used when the resolution is missing. It is used merely as an
approximate size hint.
If the resolution for a specific device is known it should be added to the
udev hwdb so it can be set globally. See the bcm5974 entries here:
http://cgit.freedesktop.org/systemd/systemd/tree/hwdb/60-evdev.hwdb.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This is an old recording and predates properties. It's not a clickpad, we
assume INPUT_PROP_POINTER is set.
From: https://bugs.freedesktop.org/attachment.cgi?id=57154
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
