In order to provide higher precision event time stamps, change the
internal time measuring from milliseconds to microseconds.
Microseconds are chosen because it is the most fine grained time stamp
we can get from evdev.
The API is extended with high precision getters whenever the given
information is available.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Hallelujah-expressed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Currently unused, but store the ratio of DPI:default DPI for later use.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
To quote Bryce Harrington from [1]:
"MIT has released software under several slightly different licenses,
including the old 'X11 License' or 'MIT License'. Some code under this
license was in fact included in X.org's Xserver in the past. However,
X.org now prefers the MIT Expat License as the standard (which,
confusingly, is also referred to as the 'MIT License'). See
http://cgit.freedesktop.org/xorg/xserver/tree/COPYING
When Wayland started, it was Kristian Høgsberg's intent to license it
compatibly with X.org. "I wanted Wayland to be usable (license-wise)
whereever X was usable." But, the text of the older X11 License was
taken for Wayland, rather than X11's current standard. This patch
corrects this by swapping in the intended text."
libinput is a fork of weston and thus inherited the original license intent
and the license boilerplate itself.
See this thread on wayland-devel here for a discussion:
http://lists.freedesktop.org/archives/wayland-devel/2015-May/022301.html
[1] http://lists.freedesktop.org/archives/wayland-devel/2015-June/022552.html
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Acked-by: Jonas Ådahl <jadahl@gmail.com>
On touchpads with resolutions, use a 5mm motion threshold before we unpin the
finger (allow motion events while a clickpad button is down). This should
remove any erroneous finger movements while clicking, at the cost of having to
move the finger a bit more for a single-finger click-and-drag (use two fingers
already!)
And drop the finger drifting, it was per-event based rather than time-based.
So unless the motion threshold was hit in a single event it was possible to
move the finger around the whole touchpad without ever unpinning it.
Drop the finger drifting altogether, if the touchpad drifts by more than 5mm
we have other issues.
https://bugzilla.redhat.com/show_bug.cgi?id=1230462
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
If asprintf fails for any reason, the contents of the pointer
are undefined. While some platforms set it to NULL, there is no
guarantee that all will.
This change adds a simple wrapper to ensure proper NULL results
on failure.
Signed-off-by: Jon A. Cruz <jonc@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Added LIBINPUT_PRINTF attribute and the required declaration for it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Check a couple of easy yes/no definitives that cover most Lenovo laptops,
and avoid false positives on Wacoms.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
There is quite a wide spread in the delta events generated by trackpoints,
some generate deltas of 1-2 under normal use, while others generate deltas
from 1-20.
It is desirable to normalize trackpoint deltas just like we are normalizing
mouse deltas to 1000 dpi, so as to give different model laptops aprox.
the same trackpoint cursor speed ootb.
Recent versions of udev + hwdb set a POINTINGSTICK_CONST_ACCEL udev property
which can be used to adjust trackpoints which are too slow / too fast
ootb, this commit implements support for that property.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Change vector_get_direction input to a normalized_coords type rather than
passing in a separate x,y pair, and rename it normalized_get_direction to
match. Since it now depends on the normalized_coords type which gets declared
in libinput-private.h also move it to libinput-private.h .
Note this commit also contains a functional change wrt the get_direction
usuage in the palm detection. The palm-detection code was calling get_direction
on non normalized coordinates, this commits changes the code to normalize
the coordinates first. This is the right thing to do as calling get_direction
on non normalized coordinates may result in a wrong direction getting returned
when the x and y resolution of the touchpad are not identical.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This reverts commit 0e64837f30.
Rather than a customized touchpad property, let udev handle this and set the
absinfo struct during the normal setup procedures. No need for libinput to
have a custom workaround here.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Delta movements on most slower movements are less than 1.0 per event, so we'd
end up with an undefined direction for all of them. This led to the velocity
being calculated across opposite movements rather than (as intended) across
movements within a shared octant.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Not all touchpad kernel drivers supply the x/y resolution. Let the udev hwdb
fix this up where possible and read the value from it.
This is intentionally only used on touchpads, touchscreen devices without
resolution should be considered buggy and fixed in the kernel.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Sending separate axis events instead of one unified events is limiting,
especially when simultaneously scrolling in both directions and the caller
tries to implement kinetic scrolling.
Take a page from the tablet-support branch and instead implement the axis
event as a generic event that can contain multiple axes simultaneously.
Right now we only have two (scroll) axes and we could easily just check both
for non-zero values. If we want to allow further axes in the future, we need
a check whether an axis is set in an event, that's what
libinput_event_pointer_has_axis to scroll events() is for.
We also need the mask to notify of a scroll stop event, which could otherwise
be confused as a vertical-only or horizontal-only event.
This is an API and ABI break.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Instead of using a hard coded mouse DPI value, we query it from udev.
If it's not present or the property is obviously broken we fall back
to default.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This adds "struct ratelimit" and "ratelimit_test()". It's a very simple
rate-limit helper modeled after Linux' lib/ratelimit.c by Dave Young.
This comes in handy to limit log-messages in possible busy loops etc..
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
sendevents config tests currently disabled for LITEST_TABLET until that gains
the matching bits in the dispatch.
Conflicts:
src/evdev.c
src/libinput.c
test/litest.c
test/litest.h
The current conditions result in _elem being assigned _arr[i] before the
condition is checked. This is fine since we then break from the loop and don't
access it anyway, but it makes Coverity unhappy.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The kernel may send a 'release' event without ever having sent a key
'pressed' event in case the key was pressed before libinput was
initiated. Ignore these events so that we always guarantee a release
event always comes after a pressed event for any given key or button.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Makes it possible to use from the touchpad code.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
For those whose eyes struggle to focus on 5 zeros in a row, or those just sick
of forgetting one zero and wondering why things don't work.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
