The firmware version is in id.version, not id.model which is always
PSMOUSE_ALPS for ALPS devices.
The various fw versions are listed in <kernel>/drivers/input/mouse/alps.h and
are all hex numbers. Version 8 is actually 0x800, change the match
accordingly.
Expected side-effect: earlier versions of ALPS touchpads now lose their
(erroneous) size assignment.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The Wacom tilt range is 64 degrees so we map everything into that until we
know otherwise.
This commit also switches the tilt axes around to align the angles with the
x/y orientation, i.e. tilting the top of the stylus towards the positive x
axis now generates a positive x tilt.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
If dwt is disabled on the commandline, e.g. by setting an xinput property it
may be disabled before the release event comes in. This caused the timer to
refresh indefinitely since the key state mask was still on for that key.
Always updating the key state mask (even when dwt is disabled) fixes that.
If a key is held down while dwt is disabled, this can still cause a indefinite
timer refresh, so in the timer func, check if dwt is enabled before refreshing
the timer.
https://bugs.freedesktop.org/show_bug.cgi?id=94015
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
If a USB keyboard like the YubiKey is found before the internal keyboard, it
will be paired with the touchpad when it is seen. The internal keyboard is
seen later bug ignored because we already have a keyboard paired with the
touchpad.
This is obviously wrong. For now, give priority to serio keyboards, and
override existing dwt pairings with the new keyboard.
https://bugs.freedesktop.org/show_bug.cgi?id=93983
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
If a key enables dwt and is held down when the timeout expires, re-issue the
timeout.
There is a corner case where dwt may not work as expected:
1. key down and held down
2. dwt timer expires, dwt is re-issued
3. touch starts
4. key is released
5. dwt timer expires
6. touch now starts moving the pointer
This is an effect of the smart touch detection. A touch starting after the
last key press is released for pointer motion once dwt turns off again. This
is what happens in the above case, the dwt timer expiring is the last virtual
key press. This is a corner case and likely hard to trigger by a real user.
https://bugs.freedesktop.org/show_bug.cgi?id=93984
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This was the reason for the valgrind test case failures whenever we
accumulated too many tests (see 9c2afae1 and 2a110104). The cause was simply
that we ran out of fds which caused libevdev to fail the scandir() searching
for the event node. That resulted in a NULL devnode and an abort in litest.
Close the fd before freeing the evdev device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Some older touchpad devices jitter a fair bit when a finger is resting on the
touchpad. That's why the hysteresis was introduced in the synaptics driver
back in 2011. However, the default value of the hysteresis in the synaptics
driver ended up being 0, even though the code looks like it's using a fraction
of the touchpad diagonal. When the hysteresis code was ported to libinput it
was eventually set to 0.5mm.
Turns out this is still too high and tiny finger motions are either
nonreactive or quite jumpy, making it hard to select small targets. Drop the
default hysteresis by reducing its margin to 0, but leave it in place for
those devices where we need them (e.g. the cyapa touchpads).
https://bugs.freedesktop.org/show_bug.cgi?id=93503
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Last argument is a boolean whether we want to have a tap timeout. It used to
be the ms to sleep, obsolete since e4adbff919
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a finger is resting in the software button area, it must not be counted
towards the gesture. So a two-finger movement must be a scroll event, not a
three-finger pinch.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This button sends a release N, press N+1 on each press, cycling through the
three event codes supported. This causes a stuck button since the current mode
is never released.
Long-term this better served by a set of switches that toggle accordingly, for
now disable the button codes.
https://bugs.freedesktop.org/show_bug.cgi?id=92127
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
There are a number of use-cases where tapping may be desirable, but
tap-and-drag is not, e.g. where tapping is used to select multiple items in a
list. Having tap-and-drag on hinders this, and the nature of the interaction
means it cannot be detected based on timeouts, movement thresholds, etc.
Provide an option instead to turn tap-an-drag off. Tap-and-drag remains
enabled by default (though tapping is disabled by default).
For the touchpad tap state diagram, the new option disables the transition
from state TOUCH to state TAPPED and releases the button immediately instead.
This means that multitap-and-drag is disabled too since we now just loop
around in the single-tap state for multitap.
It also makes tapping more responsive - we don't have to wait for the timeout
before we know whether it's a tap event. The first touch time is noted, we now
send the button press with the time of the first touch and the release with
the time of the release. This ensures a realistic time diff between the two
events.
https://bugs.freedesktop.org/show_bug.cgi?id=93502
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.netto>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
When two fingers move slowly, an event frame may only have one finger motion,
followed by a frame with the other finger's motion. If we only divide by the
number of dirty touches, the speed of the gesture increases whenever that
happens.
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The first/second variables are only needed for pinch, so we can skip them
here.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Coverity claims they're used uninitialized which isn't true. The condition
that guards it's use also guards its initialization.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead of an explicit tablet mode that device must be changed into, let the
caller decide which coordinates are preferred. The tablet mode may be
application-specific and usually depends on the tool as well.
This patch adds an interface to get a motion delta for the x/y axes in
pixel-like coordinates. libinput provides some magic to convert the tablet
data into something that resembles pixels from a mouse motion.
For unaccelerated relative motion, the caller should use the mm values from
the tablet and calculate deltas manually.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jason Gerecke <jason.gerecke@wacom.com>
No point trying to detect pinch gestures if we only have one set of
coordinates. This makes two-finger scrolling on ST touchpads more reactive.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Synaptics, Elantech and Alps semi-mt devices all have issues with reporting
correct MT data, even the bounding box which semi-mt devices are supposed to
report is wrong.
Synaptics devices have massive jumps with two fingers down. Elantech devices
may open slots without coordinate data. Alps devices may send 0/0 coordinates
as initial slot position.
All these may be addressable with specific quirks, but the actual benefit is
largely restricted to better palm detection (though even with quirks this is
unlikely to work) and support for pinch gestures (again, lack of coordinates
makes supporting those hard anyway).
Elantech: https://bugs.freedesktop.org/show_bug.cgi?id=93583
Alps: https://bugzilla.redhat.com/show_bug.cgi?id=1295073
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
More accurate representation of what we actually want to do. Plus it avoids
weird test case failures in semi-mt where we always pick the t/l and b/r
touches for the bounding box. That is the proper behavior for semi-mt, but
it's not for the tests where we expect simultaneous finger movement.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
If the touch hasn't updated, the distance hasn't changed so there is no need
to unhover.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Not much we can do about this until we get SMBus/RMI4 in the kernel or better
touchpads in general but this way we can at least point to some official
explanation.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Pure movement detection is quite unreliable when trying 3-finger pinch
gestures, and many gestures are misdetected as swipes. Before looking at the
motion, look at the constellation of the fingers. If one finger is 20mm below
the other one, assume they're in a pinch position.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
