The Wacom Express Key Remote sends the serial number via EV_MSC. At some later
point we'll need the serial to match the LEDs correctly but for now we can
ignore them.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
(cherry picked from commit 0933650f66)
Includes the Dell Lattitude E5420 but since all alps touchpads with the same
fw version are the same (as far as we know) hooking this off the firmware
version should cover this generation.
https://bugzilla.redhat.com/show_bug.cgi?id=1336084
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
(cherry picked from commit cebbe0c2da)
This was introduced for bug 94379 - an X1 Carbon 3rd. Other touchpads have
different pressure change ranges, causing this condition to trigger
randomly and resulting in a jerky pointer motion.
For now, reduce the check to the *50 and *60 series touchpads until we have
data for more touchpads that we can add one-by-one.
https://bugs.freedesktop.org/show_bug.cgi?id=95393
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
(cherry picked from commit 2f5231cc88)
Introduced in 6ad303b as part of an code flow optimization, causing any 3+
finger gesture to be posted as swipe gesture, even when gestures are disabled.
However, the event is filtered in the higher levels with a bug message printed
to the log.
Don't post swipe gestures for devices where gestures are disabled.
https://bugs.freedesktop.org/show_bug.cgi?id=95314
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
(cherry picked from commit 98ee1791ca)
It's a bit hard to find what can be configured in the wall of text that is the
doxygen output. Add a TOC of the various options so it's easy to get a quick
grasp.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a touch moves by more than 20mm within a single frame, reset the motion
history, effectively discarding the movement. This is a relatively common bug
and almost always needs a kernel fix, so add an explanatory page to the docs.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Don't move across the touchpad in one single event, it looks like a cursor
jump that we're trying to detect in future patches.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The "latest" documentation link is the location for the master branch,
released versions have their own directory on the server.
The micro-versions of 90 and above are used for snapshots and release
candidates, so whenever we have a micro version of >= 90 we still want to link
to the "latest" documentation. In all other cases, we link to the current
release.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
25a9f39 changed the range to [-1, 1] but that's incorrect for the distance
values. Split the normalization up into two functions and make sure our
distance range is correct.
https://bugs.freedesktop.org/show_bug.cgi?id=95074
And while we're at it, sneak in a test for pressure ranges too.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Logitech does not sell internal touchpads, the closest ones are the TK820 and
the K400 series devices. Neither of which need DWT, the touchpad is next to
the keyboard.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
C guarantees that an enum value is previous value+1, so we might as well start
at -1000 and not have to worry about the actual values.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
This interface handles the buttons on the physical tablet itself, including
the touch ring and the strip.
A notable difference to other libinput interfaces here is that we do not use
linux/input.h event codes for buttons. Instead, the buttons are merely
numbered sequentially, starting at button 1. This means:
* the API is different, instead of get_button() we have get_button_number() to
drive the point home
* there is no seat button count. pads are inherently different devices and
compositors should treat them as such. The seat button count makes sense
when you want to know how many devices have BTN_LEFT down, but it makes no
sense for buttons where all the semantics are handled by the compositor
anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
If a touchscreen has a fuzz value use it for motion hysteresis similar to how
we do it for a touchpad. This stops pointer wobbles as seen in
https://bugs.freedesktop.org/show_bug.cgi?id=94918
It's up to the system to override or set the kernel's fuzz value correctly,
i.e. a udev hwdb entry is required where the kernel driver does not set it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
If some elantech touchpads require a hysteresis, let's use some more generic
tag for those touchpads that require correct handling of pointer wobbles.
https://bugs.freedesktop.org/show_bug.cgi?id=94897
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
When the touchpad is disabled, the top software button on the Lenovo T440
series touchpads currently enlarge by a factor of 1.5 (to 15mm). This is not
enough, a user has to rotate the wrist quite uncomfortable when using
the left mouse button.
When the touchpad itself is off anyway we can extend the size of the top
software buttons to the factor 3, i.e. 30mm.
Signed-off-by: Peter Frühberger <peter.fruehberger@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
We already handle the case where we have MB emulation active and a middle
button is pressed because we often don't know if we have a middle button on
the device.
But the other way round makes little sense, when a physical middle button is
down emulation should not engage. Test for this.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Rather than checking the physical key's state, set a flag for the button to be
down. This enables us to use non-physical buttons (middle button emulation).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The only difference between evdev_pointer_notify_physical_button() and
evdev_pointer_notify_button() is that the former filters out middle button
emulations where applicable.
Doing so effectively disables using a button for scrolling that is also used
for middle button emulation. This is intentional, it is a niche use-case
(and prone to timer races). OTOH some devices exist that only have two buttons
on the pointing stick and require button scrolling. This use-case is given
preference.
https://bugs.freedesktop.org/show_bug.cgi?id=94856
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
libudev's util_replace_chars() replaces the () with underscores so that match
would work too but let's use ? instead to make it look like a regex.
This now activates the rules for all cyapa touchpads, before they wouldn't
have applied to any device.
https://bugs.freedesktop.org/show_bug.cgi?id=93846#c12
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This is especially a problem for the cursor tool which can be legitimately
left on the tablet. It wobbles by a couple of device units, resulting in
continuous axis updates to the caller. Pre-filter any of these events by the
axis' fuzz value so we don't even process them.
For ABS_DISTANCE which doesn't have a fuzz we hard-code a minimum fuzz of 2.
This should eventually land in the kernel though.
https://bugs.freedesktop.org/show_bug.cgi?id=94892
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
