Equivalent to the pointer axis function - it gets the mouse wheel clicks from
the tablet mouse.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Stephen Chandler Paul <thatslyude@gmail.com>
Providing a relative axis in the axis_get_value() is inconsistent with the
other axes, this will be fixed in a follow-up commit.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Stephen Chandler Paul <thatslyude@gmail.com>
Split out the actual axis printing into a helper function and call that from
the main tablet proximity/axis print functions.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Stephen Chandler Paul <thatslyude@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Stephen Chandler Paul <thatslyude@gmail.com>
The little wheel isn't a full wheel, it has a ~90 degree rotation angle with a
range of 1024 values. To avoid confusion with "wheel" elsewhere in the API
name it slider.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Stephen Chandler Paul <thatslyude@gmail.com>
Needs to be calculated from the x/y tilt values, the mouse has a fixed offset
of 175 degrees counterclockwise.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Stephen Chandler Paul <thatslyude@gmail.com>
This is only used internally.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Stephen Chandler Paul <thatslyude@gmail.com>
Having a motion event that's sent right after the original proximity event just
to give the values of each axis is somewhat redundant. Since we already include
the values of each axis with each type of event, we may as well use the
proximity event to give the client the starting values for each axis on the
tablet.
Signed-off-by: Stephen Chandler Paul <thatslyude@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
TABLET_PROXIMITY events cause many terminals to push every column to the right
by one additional tab, this just increases the space after the event type so
that everything lines up again.
Signed-off-by: Stephen Chandler Paul <thatslyude@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There isn't much purpose in having proximity in and out as different events,
combining them into one single event is more consistent with the rest of the
API, and means less code for clients to have to work with.
Signed-off-by: Stephen Chandler Paul <thatslyude@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Some devices require more than just flipping around the buttons, such as
tablets.
When it comes to devices like tablets, because the position of the palm rest is
on the right, the entire tablet has to be flipped around in order to be usable
by lefties. As such, this requires that we reverse the coordinates of the
tablets in addition to flipping the buttons on the tablet. As such, renaming
these functions so that they aren't specific to devices where only the buttons
are flipped seems appropriate.
Signed-off-by: Stephen Chandler Paul <thatslyude@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Sending separate axis events instead of one unified events is limiting,
especially when simultaneously scrolling in both directions and the caller
tries to implement kinetic scrolling.
Take a page from the tablet-support branch and instead implement the axis
event as a generic event that can contain multiple axes simultaneously.
Right now we only have two (scroll) axes and we could easily just check both
for non-zero values. If we want to allow further axes in the future, we need
a check whether an axis is set in an event, that's what
libinput_event_pointer_has_axis to scroll events() is for.
We also need the mask to notify of a scroll stop event, which could otherwise
be confused as a vertical-only or horizontal-only event.
This is an API and ABI break.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Under gdb, signalfd will still deliver the signal when gdb itself is
interrupted and quit event-debug. For a debugging tool, that's not optimal.
Switch to a normal signal handler instead, signalfd is overkill here anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Change the seat field widths to match the usual seat0/default. This compresses
the output a bit, we're printing too much already.
Also, one of my mice has >30 chars, it's annoying to look at. Fix this.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We need to be able to turn config options on/off for testing, so switch to
something that's a bit more flexible than characters that represent the
options.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Since the orientation of the tablet can potentially change, this naming scheme
makes a lot more sense then VERTICAL and HORIZONTAL does since they don't
reflect the actual physical movement.
Signed-off-by: Stephen Chandler Paul <thatslyude@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A proximity-in event is something we want, especially since the current drafted
wayland spec has a proximity-in event. Adding this also makes our events more
consistent. And since we can just report the current tool in use with
proximity-in events, we can get rid of the tool-update event.
Signed-off-by: Stephen Chandler Paul <thatslyude@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead of only allowing one owner keeping a libinput context alive,
make context reference counted, replacing libinput_destroy() with
libinput_unref() while adding another function libinput_ref().
Even though there might not be any current use cases, it doesn't mean we
should hard code this usage model in the API. The old behaviour can be
emulated by never calling libinput_ref() while replacing
libinput_destroy() with libinput_unref().
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Rather than a single global logging function, make the logging dependent on
the individual context. This way we won't stomp on each other's feet in the
(admittedly unusual) case of having multiple libinput contexts.
The userdata argument to the log handler was dropped. The caller has a ref to
the libinput context now, any userdata can be attached to that context
instead.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This is preparation work for context-specific log handlers.
Callers are now encouraged to first initialize the context with
libinput_udev_create_context() and then set the seat for this context with
libinput_udev_assign_seat().
In the upcoming patch to support context-specific log handlers this enables a
caller to set the log handler for a context before any devices are
initialized. Otherwise, a log message generated by a new device may pass a
libinput context that the caller is not yet aware of.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
e912d620d0 changed from POINTER_BUTTON_STATE to
simply BUTTON_STATE, replicate that for key events too.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
To provide a generic naming system of type_direction. That will become more
important once we add new axes as part of the ongoing work to support graphics
tablets.
[edit: and switch to the new defines]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Instead of device-specific coordinates that the caller can't interpret without
knowing the range anyway, return mm as the default value.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Print all axes on the same line, with a * for those that changed. This makes
changes on axes a lot more obvious than when broken up per line.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Stephen Chandler Paul <thatslyude@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Stephen Chandler Paul <thatslyude@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
