* dbus/dbus-connection.c
(dbus_connection_send_message_with_reply_and_block): add some @todo
* bus/driver.c (bus_driver_add_connection): add a FIXME about memleak
(patch untested because can't compile)
* bus/driver.c (create_unique_client_name): make this function
never recycle client names. Also, caller should initialize
the DBusString.
* dbus/dbus-sysdeps.c (_dbus_get_current_time): new function
* bus/Makefile.am:
Add driver.[ch]
* bus/connection.c: (connection_disconnect_handler):
Remove the connection from the bus driver's list.
(connection_watch_callback): Dispatch messages.
(free_connection_data): Free connection name.
(bus_connection_setup): Add connection to the bus driver's list.
(bus_connection_remove_owned_service):
(bus_connection_set_name), (bus_connection_get_name):
Add functions for setting and getting the connection's name.
* bus/connection.h:
Add function headers.
* bus/driver.c: (create_unique_client_name),
(bus_driver_handle_hello_message),
(bus_driver_send_welcome_message), (bus_driver_message_handler),
(bus_driver_add_connection), (bus_driver_remove_connection):
* bus/driver.h:
* bus/main.c:
* bus/services.c: (bus_service_free):
* bus/services.h:
New file that handles communication and registreation with the bus
itself.
* dbus/dbus-connection.c: (dbus_connection_send_message):
Add a new client_serial parameter.
(dbus_connection_send_message_with_reply):
Remove a @todo since we've implemented the blocking function.
(dbus_connection_send_message_with_reply_and_block):
New function that sends a message and waits for a reply and
then returns the reply.
* dbus/dbus-connection.h:
Add new functions.
* dbus/dbus-errors.c: (dbus_result_to_string):
* dbus/dbus-errors.h:
Add new DBUS_RESULT.
* dbus/dbus-message-internal.h:
* dbus/dbus-message.c: (_dbus_message_get_reply_serial),
(_dbus_message_set_sender), (dbus_message_write_header),
(dbus_message_new_reply), (decode_header_data),
(_dbus_message_loader_return_buffer), (_dbus_message_test):
* dbus/dbus-message.h:
Add new functions that set the reply serial and sender.
Also marshal and demarshal them correctly and add test.
* dbus/dbus-protocol.h:
Add new DBUS_MESSAGE_TYPE_SENDER.
* glib/dbus-glib.h:
* glib/dbus-gmain.c: (watch_callback), (free_callback_data),
(add_watch), (remove_watch), (add_timeout), (remove_timeout),
(dbus_connection_hookup_with_g_main):
* glib/test-dbus-glib.c: (main):
Rewrite to use GIOChannel and remove the GSource crack.
* test/echo-client.c: (main):
* test/watch.c: (check_messages):
Update for changed APIs
* dbus/Makefile.am: Add dbus-timeout.[cħ]
* dbus/dbus-connection.c: (_dbus_connection_new_for_transport):
Create a DBusTimeoutList.
(dbus_connection_set_timeout_functions): Add new function to
set timeout callbacks
* dbus/dbus-connection.h: Add public DBusTimeout API.
* dbus/dbus-message.c: (dbus_message_get_service):
* dbus/dbus-message.h: New function.
* dbus/dbus-server.c: Fix small doc typo.
* dbus/dbus-timeout.[ch]: New files for mainloop timeouts.
* dbus/dbus-connection.c (dbus_connection_get_is_authenticated):
new function
* dbus/dbus-server.c (dbus_server_set_max_connections)
(dbus_server_get_max_connections, dbus_server_get_n_connections):
keep track of current number of connections, and add API for
setting a max (but haven't implemented enforcing the max yet)
* dbus/dbus-transport-unix.c (unix_do_iteration): only do the
reading/writing if read_watch != NULL or write_watch != NULL.
* dbus/dbus-message.c (_dbus_message_loader_return_buffer): fix
the message loader code to actually load message->header and
message->body into the newly-created message.
* dbus/dbus-transport-unix.c (check_write_watch): fix a mem leak
in OOM case
* dbus/dbus-connection.c (dbus_connection_set_max_message_size)
(dbus_connection_get_max_message_size)
(dbus_connection_set_max_live_messages_size)
(dbus_connection_get_max_live_messages_size): implement some
resource limitation functions
* dbus/dbus-resources.c: new file implementing some of the
resource limits stuff
* dbus/dbus-message.c (dbus_message_iter_get_byte_array): add
missing docs, add @todo to handle OOM etc.
* dbus/dbus-marshal.c (_dbus_demarshal_byte_array): add missing
docs
* dbus/dbus-connection.c (dbus_connection_unref): disconnect the
connection if it hasn't been already.
* dbus/dbus-connection.h: kill off the idea of an ErrorFunction,
replace with DisconnectFunction.
Building --disable-verbose-mode --disable-asserts --disable-tests
cuts the library from 112K to 45K or so
* configure.in: check for varargs macro support,
add --enable-verbose-mode, --enable-asserts.
* dbus/dbus-internals.h (_dbus_assert): support
DBUS_DISABLE_ASSERT
(_dbus_verbose): support DBUS_ENABLE_VERBOSE_MODE
* dbus/dbus-test.c: include config.h so that tests actually run
* dbus/dbus-string.c: add assertions that stuff is 8-byte aligned,
so the failure mode when that assumption fails will be plenty
obvious.
* configure.in: default --enable-tests to $USE_MAINTAINER_MODE
* dbus/Makefile.am: fix it up so dubs-test-main.c is included in
the distribution
* test/Makefile.am: don't use special variable "TESTS" for echo-*
since we don't want to use those in make check
* dbus/dbus-test.c (dbus_internal_symbol_do_not_use_run_tests):
fix build when --disable-tests
* Makefile.am (EXTRA_DIST): put HACKING in here
* HACKING: document procedure for making a tarball release.
* bus/connection.c: (connection_error_handler),
(bus_connection_setup):
* bus/main.c: (main):
Make sure that the DBusConnectionData struct is NULLed
out to prevent a segfault.
* dbus/dbus-errors.c: (dbus_result_to_string):
* dbus/dbus-errors.h:
* dbus/dbus-message.c: (dbus_message_get_fields),
(dbus_message_get_fields_valist), (_dbus_message_test):
* dbus/dbus-message.h:
Make dbus_message_get_fields return a result code so we can
track invalid fields as well as oom.
* dbus/dbus-string.c (_dbus_string_align_length): new function
* dbus/dbus-test-main.c: move main() for test app here
* dbus/dbus-test.c
(dbus_internal_symbol_do_not_use_run_tests): we have to export a
symbol to run tests, because dbus-test isn't in the main
library
Code review nitpicks.
* dbus/dbus-message.c (dbus_message_write_header): add newlines
for people with narrow emacs ;-). Assert client_serial was filled
in. Assert message->name != NULL.
(dbus_message_append_fields): have "first_field_type" arg separate
from va list, needed for C++ binding that also uses varargs IIRC
and helps with type safety
(dbus_message_new): add @todo about using DBusString to store
service/name internally
(dbus_message_new): don't leak ->service and ->name on OOM later
in the function
(dbus_message_unref): free the service name
(dbus_message_get_fields): same change to varargs
i.e. first_field_type
(_dbus_message_loader_return_buffer): assert that the message data
is aligned (if not it's a bug in our code). Put in verbose griping
about why we set corrupted = TRUE.
(decode_header_data): add FIXME that char* is evil. Was going to
add FIXME about evil locale-specific string.h strncmp, but just
switched to wacky string-as-uint32 optimization. Move check for
"no room for field name" above get_const_data_len() to avoid
assertion failure in get_const_data_len if we have trailing 2
bytes or the like. Check for service and name fields being
provided twice. Don't leak service/name on error. Require field
names to be aligned to 4 bytes.
* dbus/dbus-marshal.c: move byte swap stuff to header
(_dbus_pack_int32): uscore-prefix
(_dbus_unpack_int32): uscore-prefix
(_dbus_unpack_uint32): export
(_dbus_demarshal_string): add @todo complaining about use of
memcpy()
(_dbus_marshal_get_field_end_pos): add @todo about bad error
handling allowing corrupt data to go unchecked
* dbus/dbus-transport-unix.c (unix_do_iteration): add read/write
to the select() as needed for authentication. (should be using
_dbus_poll() not select, but for another day)
* dbus/dbus.h: include dbus/dbus-protocol.h
* dbus/dbus-internals.c: (_dbus_type_to_string):
New function that returns a string describing a type.
* dbus/dbus-marshal.c: (_dbus_demarshal_byte_array):
* dbus/dbus-marshal.h:
* dbus/dbus-message.c: (dbus_message_get_fields_valist),
(dbus_message_iter_get_field_type), (dbus_message_iter_get_double),
(dbus_message_iter_get_byte_array):
* dbus/dbus-message.h:
Add new convenience functions for appending and getting message fields.
Also add demarshalling routines for byte arrays.
reviewed by: <delete if not using a buddy>
* dbus/dbus-internals.c: (_dbus_type_to_string):
New function that returns a string describing a type.
* dbus/dbus-internals.h:
* dbus/dbus-message.c: (dbus_message_append_fields),
(dbus_message_append_fields_valist), (dbus_message_get_fields),
(dbus_message_get_fields_valist), (_dbus_message_test):
* dbus/dbus-message.h:
Add new convenience functions for appending and getting message fields.
Also add a test for those.
* bus/connection.c: implement routines for handling connections,
first thing is keeping a list of owned services on each connection
and setting up watches etc.
* bus/services.c: implement a mapping from service names to lists
of connections
* dbus/dbus-hash.c: add DBUS_HASH_POINTER
* dbus/dbus-threads.c (dbus_static_mutex_lock): add functions
to use static mutexes for global data
* dbus/dbus-connection.c (dbus_connection_set_data): add new
collection of functions to set/get application-specific data
on the DBusConnection.
* dbus/dbus-sysdeps.c (_dbus_sleep_milliseconds): new function
(_dbus_poll): new function
* dbus/dbus-internals.h (_DBUS_STRUCT_OFFSET): new macro
copied from GLib
* bus/loop.c: initial code for the daemon main loop
* test/watch.c (error_handler): make it safe if the error handler
is called multiple times (if we s/error handler/disconnect
handler/ we should just guarantee it's called only once)
* dbus/dbus-transport.c (_dbus_transport_disconnect): call the
error handler on disconnect (it's quite possible we should
just change the error handler to a "disconnect handler," I'm
not sure we have any other meaningful errors)
* configure.in: check for getpwnam_r
* dbus/dbus-transport.c, dbus/dbus-transport-unix.c,
dbus/dbus-auth.c: add credentials support, add EXTERNAL auth
mechanism as in SASL spec, using socket credentials
* dbus/dbus-sysdeps.c (_dbus_read_credentials_unix_socket): new function
(_dbus_send_credentials_unix_socket): new function
* dbus/dbus-sysdeps.c (_dbus_accept_unix_socket): rename just
dbus_accept()
(_dbus_write): only check errno if <0 returned
(_dbus_write_two): ditto
* dbus/dbus-marshal.c: (_dbus_marshal_utf8_string),
(_dbus_marshal_byte_array), (_dbus_demarshal_utf8_string),
(_dbus_marshal_test):
* dbus/dbus-marshal.h:
Add _dbus_marshal_byte_array and rename _dbus_marshal_string
to _dbus_marshal_utf8_string. Also fix some tests.
system needs more work for people using it.
I didn't want to copy all of KDEs autoconf magic so this is far from
perfect, yet. Can we use pkg-config here ?
* dbus/dbus-auth.c: fixes fixes fixes
* dbus/dbus-transport-unix.c: wire up support for
encoding/decoding data on the wire
* dbus/dbus-auth.c (_dbus_auth_encode_data)
(_dbus_auth_decode_data): append to target string
instead of nuking it.
* dbus/dbus-marshal.h (DBUS_COMPILER_BYTE_ORDER): #ifdef
WORDS_BIGENDIAN then compiler byte order is DBUS_BIG_ENDIAN,
doh
* dbus/dbus-marshal.c: Add macros to do int swapping in-place and
avoid swap_bytes() overhead (ignoring possible assembly stuff for
now). Main point is because I wanted unpack_uint32 to implement
_dbus_verbose_bytes
(_dbus_verbose_bytes): new function
* dbus/dbus-string.c (_dbus_string_validate_ascii): new function
* dbus/dbus-message.c (_dbus_message_loader_get_is_corrupted): add
mechanism to handle a corrupt message stream
(_dbus_message_loader_new): fix preallocation to only prealloc,
not prelengthen
* dbus/dbus-string.c (_dbus_string_skip_blank): fix this function
(_dbus_string_test): enhance tests for copy/move and fix the
functions
* dbus/dbus-transport-unix.c: Hold references in more places to
avoid reentrancy problems
* dbus/dbus-transport.c: ditto
* dbus/dbus-connection.c (dbus_connection_dispatch_message): don't
leak reference count in no-message case
* test/watch.c (do_mainloop): handle adding/removing watches
during iteration over the watches. Also, ref the connection/server
stored on a watch, so we don't try to mangle a destroyed one.
* dbus/dbus-transport-unix.c (do_authentication): perform
authentication
* dbus/dbus-auth.c (get_state): add a state
AUTHENTICATED_WITH_UNUSED_BYTES and return it if required
(_dbus_auth_get_unused_bytes): append the unused bytes
to the passed in string, rather than prepend
* dbus/dbus-transport.c (_dbus_transport_init_base): create
the auth conversation DBusAuth
* dbus/dbus-transport-unix.c (_dbus_transport_new_for_fd)
(_dbus_transport_new_for_domain_socket): when creating a
transport, pass in whether it's a client-side or server-side
transport so we know which DBusAuth to create
* dbus/dbus-marshal.c: (_dbus_marshal_string),
(_dbus_demarshal_double), (_dbus_demarshal_int32),
(_dbus_demarshal_uint32), (_dbus_demarshal_string),
(_dbus_marshal_test):
* dbus/dbus-marshal.h:
Add string marshal functions and have the demarshal functions
return the new position.
* doc/dbus-sasl-profile.txt: docs on the authentication protocol,
it is a simple protocol that just maps directly to SASL.
* dbus/dbus-auth.h, dbus/dbus-auth.c: authentication protocol
initial implementation, not actually used yet.
* dbus/dbus-string.c (_dbus_string_find): new function
(_dbus_string_equal): new function
(_dbus_string_base64_encode): new function
(_dbus_string_base64_decode): new function
