* configure.in: 0.11
* NEWS: update
* bus/Makefile.am (initddir): apparently we are supposed to put
init scripts in /etc/rc.d/init.d not /etc/init.d
* bus/Makefile.am: remove the "you must --enable-tests to make
check" as it broke distcheck
* bus/Makefile.am (install-data-hook): create /etc/dbus-1/system.d
* configure.in:
* bus/activation.c: (bus_activation_service_created),
(bus_activation_activate_service):
* bus/driver.c: (bus_driver_send_service_deleted),
(bus_driver_send_service_created), (bus_driver_send_service_lost),
(bus_driver_send_service_acquired),
(bus_driver_send_welcome_message),
(bus_driver_handle_list_services):
* bus/session.conf.in:
* dbus/dbus-bus.c: (dbus_bus_acquire_service),
(dbus_bus_service_exists), (dbus_bus_activate_service):
* dbus/dbus-bus.h:
Add some convenience API which lets you activate a service, and did a
bunch of s/0/DBUS_TYPE_INVALID/ in calls to dbus_message_append_args()
and dbus_message_get_args()
* dbus/dbus-marshal.c (_dbus_marshal_validate_arg): fix to avoid
calling _dbus_marshal_validate_arg() for every byte in a byte
array, etc.
* dbus/dbus-message-handler.c: use atomic reference counting to
reduce number of locks slightly; the global lock in here sucks
* dbus/dbus-connection.c
(_dbus_connection_update_dispatch_status_and_unlock): variant of
update_dispatch_status that can be called with lock held; then use
in a couple places to reduce locking/unlocking
(dbus_connection_send): hold the lock over the whole function
instead of acquiring it twice.
* dbus/dbus-timeout.c (_dbus_timeout_new): handle OOM
* bus/connection.c (bus_connections_setup_connection): fix access
to already-freed memory.
* dbus/dbus-connection.c: keep a little cache of linked list
nodes, to avoid using the global linked list alloc lock in the
normal send-message case. Instead we just use the connection lock
that we already have to take.
* dbus/dbus-list.c (_dbus_list_find_last): new function
* dbus/dbus-sysdeps.c (_dbus_atomic_inc, _dbus_atomic_dec):
change to use a struct for the atomic type; fix docs,
they return value before increment, not after increment.
* dbus/dbus-string.c (_dbus_string_append_4_aligned)
(_dbus_string_append_8_aligned): new functions to try to
microoptimize this operation.
(reallocate_for_length): break this out of set_length(), to
improve profile info, and also so we can consider inlining the
set_length() part.
* dbus/dbus-message.c (dbus_message_new_empty_header): init data
strings with some preallocation, cuts down on our calls to realloc
a fair bit. Though if we can get the "move entire string to empty
string" optimization below to kick in here, it would be better.
* dbus/dbus-string.c (_dbus_string_move): just call
_dbus_string_move_len
(_dbus_string_move_len): add a special case for moving
an entire string into an empty string; we can just
swap the string data instead of doing any reallocs.
(_dbus_string_init_preallocated): new function
Write a "test-profile" that does echo client-server with threads;
profile reveals lock contention, memcpy/realloc of buffers, and
UTF-8 validation as hot spots. 20% of lock contention eliminated
with dbus_atomic_inc/dec implementation on x86. Much remaining
contention is global mempool locks for GList and DBusList.
* dbus/dbus-sysdeps.c (_dbus_atomic_inc, _dbus_atomic_dec): add
x86 implementation
* dbus/dbus-connection.c (struct DBusConnection): use
dbus_atomic_t for the reference count
* dbus/dbus-message.c (struct DBusMessage): declare
dbus_atomic_t values as volatile
* configure.in: code to detect ability to use atomic integer
operations in assembly, from GLib patch
* dbus/dbus-internals.c (_dbus_verbose_real): call getpid every
time, tired of it being wrong in threads and forked processes
* glib/test-profile.c: a little program to bounce messages back
and forth between threads and eat CPU
* dbus/dbus-connection.c: add debug spew macros for debugging
thread locks; include config.h at top; fix deadlock in
dbus_connection_flush()
* dbus/dbus-spawn.c: s/_exit/exit/ because it was keeping gcov
data from getting written, and there wasn't a good reason to
use _exit really.
* test/decode-gcov.c (mark_inside_dbus_build_tests): don't count
dbus_verbose lines in test coverage
(main): add list of functions sorted by # of untested blocks
to the coverage report
* dbus/dbus-mempool.c: put some test-only code in DBUS_BUILD_TESTS
* dbus/dbus-marshal.c (_dbus_marshal_test): extend test coverage
* dbus/dbus-message-handler.c (_dbus_message_handler_test):
extend test coverage
* test/data/auth/cancel.auth-script: test canceling an
authentication
* dbus/Makefile.am: remove dbus-server-debug.[hc] for now, as they
aren't used. in CVS history if we end up needing them.
* dbus/dbus-message-handler.c (_dbus_message_handler_test): add
unit test
* dbus/dbus-marshal.c (_dbus_demarshal_string_array): fix this
function, which assumed length was in # of strings, not bytes
* dbus/dbus-message.c (_dbus_message_test): add tests for some
missing coverage
* dbus/dbus-connection.c
(_dbus_connection_queue_received_message): disable function for
now, we are only using it in test mode
* dbus/dbus-message.c (_dbus_message_loader_queue_messages):
remove a mistaken FIXME
* dbus/dbus-watch.c (dbus_watch_handle): warn and return if a
watch is invalid when handled
* tools/Makefile.am, tools/dbus-launch.c, tools/dbus-launch.1: add
dbus-launch utility to launch the bus from a shell script. Didn't
actually implement dbus-launch yet, it's just a placeholder still.
* dbus/dbus-address.c (dbus_parse_address): fix bug when a key in
the address had no value, and add to test suite. Fix and
regression test from Miloslav Trmac
* bus/Makefile.am, bus/dbus-daemon-1.1.in: man page for the
daemon; also documents daemon config file, so replaces
doc/config-file.txt. Corrected some stuff from config-file.txt in
the process of moving it.
* dbus/dbus-sysdeps.c (fill_user_info): Test against
DBUS_UID_UNSET to determine whether to do a uid lookup or not.
* Makefile.am: Update to use new .pc versioning scheme.
* glib/dbus-gmain.c: docs cleanups
* dbus/dbus-types.h: add docs on int64 types
* dbus/dbus-memory.c: fix docs to avoid putting private API in
public API docs section
* dbus-1.pc.in, dbus-glib-1.pc.in: rename these from
dbus-1.0.pc.in, dbus-glib-1.0.pc.in. As these change with the
parallel install API version, not with the D-BUS package version.
* HACKING: move some of README over here
* README: updates, and document API/ABI policy
* configure.in: reindentation
* configure.in: add --enable-docs which by default is auto yes if
doxygen and db2html found, no otherwise; but can be forced on/off
* doc/Makefile.am: conditionalize whether to build docs on
--enable-docs
* configure.in: 0.10
* NEWS: update
* bus/system.conf.in: add <includedir>system.d</includedir>
* dbus/dbus-userdb.c (_dbus_user_database_lookup): fix bug when
username was provided but not uid
* bus/config-parser.c (struct BusConfigParser): keep track of
whether the parser is toplevel or was included; change some
of the error handling if it's included.
Unbreak my code...
* dbus/dbus-transport.c (_dbus_transport_get_dispatch_status):
report correct status if we finish processing authentication
inside this function.
* bus/activation.c (try_send_activation_failure): use
bus_transaction_send_error_reply
* bus/connection.c (bus_connection_get_groups): return an error
explaining the problem
* bus/bus.c (bus_context_check_security_policy): implement
restriction here that inactive connections can only send the
hello message. Also, allow bus driver to send anything to
any recipient.
* bus/connection.c (bus_connection_complete): create the
BusClientPolicy here instead of on-demand.
(bus_connection_get_policy): don't return an error
* dbus/dbus-message.c (dbus_message_new_error_reply): allow NULL
sender field in message being replied to
* bus/bus.c (bus_context_check_security_policy): fix silly typo
causing it to return FALSE always
* bus/policy.c (bus_client_policy_check_can_send): fix bug where
we checked sender rather than destination
test suite is slightly hosed at the moment, will fix soon
* bus/connection.c (bus_connections_expire_incomplete): fix to
properly disable the timeout when required
(bus_connection_set_name): check whether we can remove incomplete
connections timeout after we complete each connection.
* dbus/dbus-mainloop.c (check_timeout): fix this up a bit,
probably still broken.
* bus/services.c (bus_registry_acquire_service): implement max
number of services owned, and honor allow/deny rules on which
services a connection can own.
* bus/connection.c (bus_connection_get_policy): report errors here
* bus/activation.c: implement limit on number of pending
activations
* test/data/valid-config-files/basic.conf: add <limit> tags to
this test
* bus/config-parser.h, bus/config-parser.c, bus/bus.c: Implement
<limit> tag in configuration file.
* bus/dispatch.c: somehow missed some name_is
* dbus/dbus-timeout.c (_dbus_timeout_set_enabled)
(_dbus_timeout_set_interval): new
* bus/connection.c (bus_connections_setup_connection): record time
when each connection is first set up, and expire them after the
auth timeout passes.
* dbus/dbus-message.c, dbus/dbus-marshal.c: add 64-bit integer
support, and do some code cleanups to share more code and
speed up array marshal/demarshal.
* dbus-1.0.pc.in (Cflags): put libdir include file in cflags
* configure.in: generate dbus-arch-deps.h
* dbus/dbus-protocol.h (DBUS_TYPE_INT64, DBUS_TYPE_UINT64): add
64-bit typecodes
* test/data/valid-messages/opposite-endian.message: fix test
to use proper type for rply field
* test/data/invalid-messages: add tests for below validation
* dbus/dbus-message.c (decode_header_data): validate field types,
and validate that named fields are valid names
(decode_name_field): consider messages in the
org.freedesktop.Local. namespace to be invalid.
* dbus/dbus-string.c (_dbus_string_validate_name): new
* bus/driver.c (bus_driver_handle_hello): check limits and
return an error if they are exceeded.
* bus/connection.c: maintain separate lists of active and inactive
connections, and a count of each. Maintain count of completed
connections per user. Implement code to check connection limits.
* dbus/dbus-list.c (_dbus_list_unlink): export
* bus/bus.c (bus_context_check_security_policy): enforce a maximum
number of bytes in the message queue for a connection
* dbus/dbus-auth.c (record_mechanisms): memleak fixes
* dbus/dbus-sysdeps.c (_dbus_string_save_to_file): fix some
memleaks
* dbus/dbus-keyring.c (add_new_key): fix a memleak, and
on realloc be sure to update the pointer in the keyring
* dbus/dbus-string.c (_dbus_string_zero): compensate for align
offset to avoid writing to unallocated memory
* dbus/dbus-auth.c (process_rejected): return FALSE if we fail to
try the next mechanism, so we properly handle OOM
* dbus/dbus-keyring.c (_dbus_keyring_new_homedir): fix double-free
on OOM.
(_dbus_keyring_new): fix OOM bug
(_dbus_keyring_new_homedir): always set error; impose a maximum
number of keys we'll load from the file, mostly to speed up the
test suite and make its OOM checks more useful, but also for
general sanity.
* dbus/dbus-auth.c (process_error_server): reject authentication
if we get an error from the client
(process_cancel): on cancel, send REJECTED, per the spec
(process_error_client): send CANCEL if we get an error from the
server.
* dbus/dbus-mainloop.c (_dbus_loop_iterate): fix UMR in verbose
debug spew
* dbus/dbus-auth.c (handle_client_data_cookie_sha1_mech): fix OOM
handling problem
* dbus/dbus-keyring.c (_dbus_keyring_new_homedir): only whine
about DBUS_TEST_HOMEDIR once
* bus/Makefile.am (TESTS_ENVIRONMENT): put DBUS_TEST_HOMEDIR in
the environment
* bus/dispatch.c (bus_dispatch_sha1_test): actually load sha1
config file so we test the right thing
Throughout: assorted docs improvements
* glib/dbus-gmain.c: adapt to watch changes
* bus/bus.c, bus/activation.c, etc.: adjust to watch changes
* dbus/dbus-server.h: remove dbus_server_handle_watch
* dbus/dbus-connection.h: remove dbus_connection_handle_watch
* dbus/dbus-watch.c (dbus_watch_handle): change DBusWatch to work
like DBusTimeout, so we don't need dbus_connection_handle_watch
etc.
* dbus/dbus-mainloop.c (_dbus_loop_iterate): fix logic so that if
there was an OOM watch we skipped, we always return TRUE so we
iterate again to have a look at it again. Fixes test suite hang.
Code rearrangement also lets us lose some memset and only iterate
over callbacks once.
* bus/driver.c (bus_driver_handle_message): sense of test for
reply was backward
* doc/dbus-specification.sgml: make spec say serials are unsigned
* dbus/dbus-message.h: change message serials to unsigned
* dbus/dbus-connection.c: adapt to message serials being unsigned
* bus/bus.c: create and keep around a shared DBusUserDatabase
object.
* bus/connection.c (bus_connection_get_groups): don't cache
groups for user in the connection object, since user database
object now does that.
* dbus/dbus-message.c (_dbus_message_add_size_counter): keep a
list of size counters
(_dbus_message_loader_putback_message_link): put back a popped link
* dbus/dbus-connection.c
(dbus_connection_set_max_live_messages_size): rename
max_received_size
(dbus_connection_get_outgoing_size): get size of outgoing
queue
(_dbus_connection_set_connection_counter): remove this cruft
* dbus/dbus-userdb.c: user database abstraction, mostly to get
caching, but at some point we might want to be able to use a
different database.
* bus/dispatch.c (bus_dispatch_sha1_test): add a test that uses
SHA1 conf file to test the sha1 auth mechanism, since the regular
test always uses EXTERNAL when available.
* configure.in,
test/data/valid-config-files/debug-allow-all-sha1.conf.in:
add conf file that requires use of sha1 auth
* dbus/dbus-mainloop.c: fix some reentrancy issues by refcounting
callbacks
* test/data/valid-config-files/debug-allow-all.conf.in: allow all
users
* dbus/dbus-transport.c (_dbus_transport_get_dispatch_status):
fix to only recover unused bytes if we're already authenticated
(_dbus_transport_get_is_authenticated): fix to still mark us
authenticated if there are unused bytes.
* bus/dispatch.c: implement security policy checking
* bus/connection.c (bus_transaction_send_from_driver): new
* bus/bus.c (bus_context_check_security_policy): new
* bus/dispatch.c (send_service_nonexistent_error): delete this,
now we just set the DBusError and it gets converted to an error
reply.
* bus/connection.c (allow_user_function): enable code using actual
data from the config file
* bus/policy.c (list_allows_user): handle wildcard rules for
user/group connection perms
* bus/config-parser.c: Load up the BusPolicy and BusPolicyRules
* dbus/dbus-sysdeps.c (_dbus_get_user_id): new function
* bus/policy.c (bus_policy_append_mandatory_rule)
(bus_policy_append_default_rule, bus_policy_append_user_rule)
(bus_policy_append_group_rule): new functions
* bus/config-parser.c (bus_config_parser_new): fix a memleak
* dbus/dbus-sysdeps.c: change DBusCredentials to use longs for
the pid/gid/uid, just for paranoia.
* test/break-loader.c (randomly_do_n_things): find a byte
containing a type code, and randomly change it to a different
type code.
