* dbus/dbus-spawn.c: s/_exit/exit/ because it was keeping gcov
data from getting written, and there wasn't a good reason to
use _exit really.
* test/decode-gcov.c (mark_inside_dbus_build_tests): don't count
dbus_verbose lines in test coverage
(main): add list of functions sorted by # of untested blocks
to the coverage report
* dbus/dbus-mempool.c: put some test-only code in DBUS_BUILD_TESTS
* dbus/dbus-marshal.c (_dbus_marshal_test): extend test coverage
* dbus/dbus-message-handler.c (_dbus_message_handler_test):
extend test coverage
* test/data/auth/cancel.auth-script: test canceling an
authentication
* dbus/Makefile.am: remove dbus-server-debug.[hc] for now, as they
aren't used. in CVS history if we end up needing them.
* bus/Makefile.am, bus/dbus-daemon-1.1.in: man page for the
daemon; also documents daemon config file, so replaces
doc/config-file.txt. Corrected some stuff from config-file.txt in
the process of moving it.
* configure.in: add --enable-docs which by default is auto yes if
doxygen and db2html found, no otherwise; but can be forced on/off
* doc/Makefile.am: conditionalize whether to build docs on
--enable-docs
test suite is slightly hosed at the moment, will fix soon
* bus/connection.c (bus_connections_expire_incomplete): fix to
properly disable the timeout when required
(bus_connection_set_name): check whether we can remove incomplete
connections timeout after we complete each connection.
* dbus/dbus-mainloop.c (check_timeout): fix this up a bit,
probably still broken.
* bus/services.c (bus_registry_acquire_service): implement max
number of services owned, and honor allow/deny rules on which
services a connection can own.
* bus/connection.c (bus_connection_get_policy): report errors here
* bus/activation.c: implement limit on number of pending
activations
* test/data/valid-config-files/basic.conf: add <limit> tags to
this test
* bus/config-parser.h, bus/config-parser.c, bus/bus.c: Implement
<limit> tag in configuration file.
* dbus/dbus-message.c, dbus/dbus-marshal.c: add 64-bit integer
support, and do some code cleanups to share more code and
speed up array marshal/demarshal.
* dbus-1.0.pc.in (Cflags): put libdir include file in cflags
* configure.in: generate dbus-arch-deps.h
* dbus/dbus-protocol.h (DBUS_TYPE_INT64, DBUS_TYPE_UINT64): add
64-bit typecodes
* test/data/valid-messages/opposite-endian.message: fix test
to use proper type for rply field
* test/data/invalid-messages: add tests for below validation
* dbus/dbus-message.c (decode_header_data): validate field types,
and validate that named fields are valid names
(decode_name_field): consider messages in the
org.freedesktop.Local. namespace to be invalid.
* dbus/dbus-string.c (_dbus_string_validate_name): new
* bus/driver.c (bus_driver_handle_hello): check limits and
return an error if they are exceeded.
* bus/connection.c: maintain separate lists of active and inactive
connections, and a count of each. Maintain count of completed
connections per user. Implement code to check connection limits.
* dbus/dbus-list.c (_dbus_list_unlink): export
* bus/bus.c (bus_context_check_security_policy): enforce a maximum
number of bytes in the message queue for a connection
* dbus/dbus-auth.c (record_mechanisms): memleak fixes
* dbus/dbus-sysdeps.c (_dbus_string_save_to_file): fix some
memleaks
* dbus/dbus-keyring.c (add_new_key): fix a memleak, and
on realloc be sure to update the pointer in the keyring
* dbus/dbus-string.c (_dbus_string_zero): compensate for align
offset to avoid writing to unallocated memory
* dbus/dbus-auth.c (process_rejected): return FALSE if we fail to
try the next mechanism, so we properly handle OOM
* dbus/dbus-keyring.c (_dbus_keyring_new_homedir): fix double-free
on OOM.
(_dbus_keyring_new): fix OOM bug
(_dbus_keyring_new_homedir): always set error; impose a maximum
number of keys we'll load from the file, mostly to speed up the
test suite and make its OOM checks more useful, but also for
general sanity.
* dbus/dbus-auth.c (process_error_server): reject authentication
if we get an error from the client
(process_cancel): on cancel, send REJECTED, per the spec
(process_error_client): send CANCEL if we get an error from the
server.
* dbus/dbus-mainloop.c (_dbus_loop_iterate): fix UMR in verbose
debug spew
* dbus/dbus-auth.c (handle_client_data_cookie_sha1_mech): fix OOM
handling problem
* dbus/dbus-keyring.c (_dbus_keyring_new_homedir): only whine
about DBUS_TEST_HOMEDIR once
* bus/Makefile.am (TESTS_ENVIRONMENT): put DBUS_TEST_HOMEDIR in
the environment
* bus/dispatch.c (bus_dispatch_sha1_test): actually load sha1
config file so we test the right thing
Throughout: assorted docs improvements
* doc/dbus-specification.sgml: make spec say serials are unsigned
* dbus/dbus-message.h: change message serials to unsigned
* dbus/dbus-connection.c: adapt to message serials being unsigned
* dbus/dbus-userdb.c: user database abstraction, mostly to get
caching, but at some point we might want to be able to use a
different database.
* bus/dispatch.c (bus_dispatch_sha1_test): add a test that uses
SHA1 conf file to test the sha1 auth mechanism, since the regular
test always uses EXTERNAL when available.
* configure.in,
test/data/valid-config-files/debug-allow-all-sha1.conf.in:
add conf file that requires use of sha1 auth
* dbus/dbus-mainloop.c: fix some reentrancy issues by refcounting
callbacks
* test/data/valid-config-files/debug-allow-all.conf.in: allow all
users
* dbus/dbus-transport.c (_dbus_transport_get_dispatch_status):
fix to only recover unused bytes if we're already authenticated
(_dbus_transport_get_is_authenticated): fix to still mark us
authenticated if there are unused bytes.
* bus/dispatch.c: implement security policy checking
* bus/connection.c (bus_transaction_send_from_driver): new
* bus/bus.c (bus_context_check_security_policy): new
* bus/dispatch.c (send_service_nonexistent_error): delete this,
now we just set the DBusError and it gets converted to an error
reply.
* bus/connection.c (allow_user_function): enable code using actual
data from the config file
* bus/policy.c (list_allows_user): handle wildcard rules for
user/group connection perms
* bus/policy.h: change BusPolicy to be the thing from the config
file, and rename old BusPolicy to BusClientPolicy
* bus/bus.c, bus/connection.c, bus/config-parser.c: change to
match change in how policy works
* dbus/dbus-internals.h: mark assert_not_reached as
__attribute((noreturn))__
* dbus/dbus-connection.c (dbus_connection_flush): don't spin on
the connection if it's disconnected
* bus/activation.c (bus_activation_service_created): use new
transaction features to roll back removal of pending activation if
we don't successfully create the service after all. Don't remove
pending activation if the function fails.
* dbus/dbus-list.c (_dbus_list_insert_before_link)
(_dbus_list_insert_after_link): new code to facilitate
services.c fixes
* dbus/dbus-hash.c (_dbus_hash_table_insert_string_preallocated):
new functionality, so we can preallocate the ability to insert
into a hash table.
* bus/connection.c (bus_transaction_add_cancel_hook): new function
allowing us to put custom hooks in a transaction to be used for
cancelling said transaction
* doc/dbus-specification.sgml: add some discussion of secondary
service owners, and disallow zero-length service names
* bus/services.c (bus_registry_acquire_service): new function,
splits out part of bus_driver_handle_acquire_service() and fixes
a bug where we didn't remove the service doing the acquiring
from the secondary queue if we failed to remove the current owner
from the front of the queue.
* dbus/dbus-marshal.[ch]:
Add array_type_pos argument to _dbus_marshal_validate_arg.
Let you pass a NULL end_pos to _dbus_marshal_validate_type.
* dbus/dbus-message.[ch]:
Multi-dimensional arrays have full type specification in the
outermost array. Iter code re-arranged to handle this.
Added some more iter tests.
* doc/dbus-specification.sgml:
Add me to authors.
Remove old FIXME.
Update new array encoding description.
Correct DBUS_SERVICE_FLAGS_REPLACE_EXISTING description.
* test/data/invalid-messages/array-with-mixed-types.message:
* test/data/valid-messages/array-of-array-of-uint32.message:
Change to the new array format.
* test/data/invalid-messages/too-short-dict.message:
Fix bug in test.
* test/data/valid-messages/recursive-types.message:
Fix up and extend test.
* bus/driver.c (bus_driver_handle_acquire_service): init
retval/reply before checking name
* dbus/dbus-marshal.c (_dbus_marshal_validate_arg): add a
recursion depth argument
* dbus/dbus-message.h (struct DBusMessageIter): put some padding
in the public struct for future extension
* dbus/dbus-message-builder.c (_dbus_message_data_load): fix
typo
* dbus/dbus-marshal.c (_dbus_marshal_validate_arg): fix a verbose
message
* doc/dbus-specification.sgml: fix typo
Implemented recursive types, named types and new-style iters
* bus/driver.c:
* glib/test-thread-client.c: (thread_func):
* glib/test-thread-server.c: (handle_test_message):
* test/test-service.c: (handle_echo):
Update to new api
* dbus/Makefile.am:
* dbus/dbus-dict.c:
* dbus/dbus-dict.h:
* dbus/dbus.h
Remove DBusDict
* dbus/dbus-internals.c: (_dbus_type_to_string):
Update for new types.
* dbus/dbus-marshal.[ch]:
Implement recursive types and the new marshalling format.
Remove hardcoded dict marshalling.
Marshal named types.
* dbus/dbus-message-builder.c:
Add BYTE_ARRAY.
Remove references to old types
* dbus/dbus-message.[ch]:
New non-refcounted iter API that supports recursive iters.
Use iters for appending, including support for recursive
iters.
Add byte and named type support.
Update everything to new marshalling formats.
Add tests for new API.
* dbus/dbus-protocol.h:
Remove old array types.
Add types: BYTE, ARRAY, DICT, NAMED
* dbus/dbus-string.c:
* dbus/dbus-sysdeps.c:
Make parse_double locale safe.
* dbus/dbus-test-main.c:
Call setlocale.
* dbus/dbus-test.c:
Kill dict test
* doc/dbus-specification.sgml:
Update spec
* test/data/incomplete-messages/missing-body.message:
* test/data/invalid-messages/bad-boolean.message:
* test/data/invalid-messages/bad-boolean-array.message:
* test/data/invalid-messages/boolean-array-length-too-long.message-raw:
* test/data/invalid-messages/boolean-has-no-value.message-raw:
* test/data/invalid-messages/too-short-dict.message:
* test/data/valid-messages/dict-simple.message:
* test/data/valid-messages/dict.message:
* test/data/valid-messages/emptiness.message:
* test/data/valid-messages/lots-of-arguments.message:
* test/data/valid-messages/no-padding.message:
* test/data/valid-messages/recursive-types.message:
Add missing NAME fields
Fix up dicts & arrays
* test/data/invalid-messages/dict-with-nil-value.message:
Removed, this is not invalid anymore.
* test/data/valid-messages/recursive-types.message:
Add new test for deeply recursive types.
* doc/dbus-specification.sgml: require that base service names
start with ':' and that the base service is created/deleted
as first and last things a connection does on the bus
* bus/dispatch.c (check_existent_service_activation): lots more
work on the activation test; it doesn't fully pass yet...
* test/test-service.c (main): fix so we don't memleak the
connection to the message bus
(filter_func): accept a message asking us to exit
* qt/Makefile.am (dbusinclude_HEADERS): install dbus-qt.h,
from Colin Walters
* configure.in: fixes to Qt detection from Colin Walters
* doc/Makefile.am: Only remove generated docbook dirs if they
exist, from Colin Walters
* dbus/dbus-bus.c: change how we set well-known connections to
NULL, so that it works if a single connection is stored in
two well-known array slots.
* test/Makefile.am: remove a lot of stuff that isn't immediately
useful, it's in CVS history if we want it.
* test/test-service.c: use dbus-mainloop instead of that
watch.[hc] crack
* doc/config-file.txt (Elements): fix docs of <auth> to reflect
reality; in fact multiple mechanisms are allowed.
* dbus/dbus-internals.c (_dbus_real_assert)
(_dbus_real_assert_not_reached): move guts of _dbus_assert() and
_dbus_assert_not_reached() into functions, so that they don't show
up in basic block counts for test coverage, and don't use up as
much disk space. Does mean slower execution speed though, so
assumes --disable-asserts is the normal production case.
* dbus/dbus-spawn.c, dbus/dbus-spawn.h: Change dbus_spawn to
return a "babysitter" object that is used to monitor the status of
the spawned process and reap it when required.
* test/test-segfault.c, test/test-exit.c,
test/test-sleep-forever.c: binaries that do various lame things,
used in the test suite.
* dbus/dbus-sysdeps.c: kill _dbus_errno_to_string()
* bus/activation.c (load_directory): fix up memleaks
(bus_activation_entry_free): free the entry
* dbus/dbus-bus.c (dbus_bus_acquire_service): return an error if
we get one from the message bus; fix memleaks.
* dbus/dbus-message.c (dbus_set_error_from_message): new function
* bus/config-parser.c (bus_config_parser_unref): free
list of mechanisms, bug discovered by test suite enhancements
(putting system.conf and session.conf into suite)
* test/Makefile.am, test/test-service.c: add placeholder for a
test service that we'll activate as part of test suite. Doesn't
do anything yet.
* dbus/dbus-sysdeps.c (_dbus_setenv): support unsetenv by
setting NULL value, and use system malloc not dbus_malloc()
when we have unavoidable memleakage.
* dbus/dbus-bus.c (dbus_bus_get): fix bug where bus type of 0
didn't work, and support DBUS_BUS_ACTIVATION.
* bus/activation.c (child_setup): pass our well-known bus type to
the child
* bus/config-parser.c: support <type> to specify well-known type
* doc/dbus-specification.sgml: document the env variables to
locate well-known buses and find service activator
* dbus/dbus-server.c (dbus_server_set_auth_mechanisms): new
function
* dbus/dbus-auth.c (_dbus_auth_set_mechanisms): new
* dbus/dbus-internals.c (_dbus_dup_string_array): new function
* dbus/dbus-sysdeps.c (_dbus_listen_unix_socket): chmod the
socket 0777, and unlink any existing socket.
* bus/bus.c (bus_context_new): change our UID/GID and fork if
the configuration file so specifies; set up auth mechanism
restrictions
* bus/config-parser.c (bus_config_parser_content): add support
for <fork> option and fill in code for <auth>
* bus/system.conf.in: add <fork/> to default configuration,
and limit auth mechanisms to EXTERNAL
* doc/config-file.txt (Elements): add <fork>
* dbus/dbus-sysdeps.c (_dbus_become_daemon): new function
(_dbus_change_identity): new function
* dbus/Makefile.am (INCLUDES): use EXPANDED_LOCALSTATEDIR to
define DBUS_SYSTEM_BUS_PATH as we want to compile in the same
final location that lands in the config file
* bus/config-loader-expat.c (bus_config_load): fix type of
XML_Parser variable
* doc/TODO: remove TODO item for dbus_bus_get()
* dbus/dbus-bus.c (bus_data_free): add missing lock/unlock
* dbus/dbus-transport-unix.c (_dbus_transport_new_for_domain_socket)
(_dbus_transport_new_for_tcp_socket): these didn't need the "server"
argument since they are always client side
* dbus/dbus-server.c (dbus_server_get_address): new function
* bus/main.c (main): take the configuration file as an argument.
* test/data/valid-config-files/debug-allow-all.conf: new file to
use with dispatch.c tests for example
* bus/test-main.c (main): require test data dir
* bus/bus.c (bus_context_new): change this to take a
configuration file name as argument
* doc/config-file.txt (Elements): add <servicedir>
* bus/system.conf, bus/session.conf: new files
* dbus/dbus-bus.c (dbus_bus_get): look for system bus on
well-known socket if none set
* configure.in: create system.conf and session.conf
* bus/config-parser.c: hacking
* dbus/dbus-memory.c: don't use DBusList for the list of stuff
to shut down, since it could cause weirdness with the DBusList
lock
* dbus/dbus-list.c (_dbus_list_test): add tests for the
link-oriented stack routines
(alloc_link): free the mempool if the first alloc from it fails
* dbus/dbus-mempool.c (struct DBusMemBlock): fix alignment issue
* dbus/dbus-string.c (UNICODE_VALID): sync new version of this
from GLib
(_dbus_string_skip_white): new
* doc/config-file.txt (Elements): add <includedir>
* bus/test.c (bus_test_flush_bus): remove the sleep from here,
I think it may have just been superstition. Not sure.
* dbus/dbus-string.c (_dbus_string_base64_decode): catch some OOM
failures that were not being handled.
* dbus/dbus-auth.c (process_auth): fix a memleak in OOM handling
* dbus/dbus-memory.c: add ability to set number of mallocs in a
row that will fail on out-of-memory.
* dbus/dbus-internals.c (_dbus_test_oom_handling): convenience
function for testing out-of-memory handling.
* bus/config-loader-expat.c (memsuite): don't wrap the dbus
allocation functions, they do map exactly to the expat ones.
* bus/connection.c (bus_connections_setup_connection): set up
the "can this user connect" function, but it always returns
TRUE until we have a config file parser so we can have a config
file that allows connections.
* doc/TODO: some notes on high-level todo items. Little nitpick
stuff is all in @todo, so no need to add it here.
* doc/config-file.txt: some notes on how config file might look
* bus/test-main.c (main): make it print something as it runs
so make check doesn't look stuck
* doc/negotiation.txt, doc/dbus-sasl-profile.txt: remove
from CVS, now obsolete
* dbus/dbus-marshal.c:
(_dbus_marshal_set_string):
Take a length argument so we can marshal the correct string
length.
(_dbus_marshal_dict), (_dbus_demarshal_dict),
(_dbus_marshal_get_arg_end_pos), (_dbus_marshal_validate_arg),
(_dbus_marshal_test):
* dbus/dbus-marshal.h:
Add support for marshalling and demarshalling dicts.
* dbus/dbus-message-builder.c: (_dbus_message_data_load):
Add support for TYPE DICT.
* dbus/dbus-message.c: (set_string_field):
Adjust header padding.
(dbus_message_append_args_valist), (dbus_message_append_dict),
(dbus_message_get_args_valist), (dbus_message_iter_get_arg_type),
(dbus_message_iter_get_dict), (_dbus_message_loader_return_buffer),
(check_message_handling), (check_have_valid_message):
* dbus/dbus-message.h:
Add functions for setting and getting dicts.
* dbus/dbus-protocol.h:
Add DBUS_TYPE_DICT.
* dbus/dbus.h:
Add dbus-dict.h
* doc/dbus-specification.sgml:
Add information about how dicts are marshalled.
* test/data/invalid-messages/dict-with-nil-value.message:
* test/data/invalid-messages/too-short-dict.message:
* test/data/valid-messages/dict-simple.message:
* test/data/valid-messages/dict.message:
Add sample messages containing dicts.
