Nobody cares about BeOS in 2022, and it cannot be built with Meson anyway.
Removing the BeOS backend also allows us to drop the dependency on a C++
compiler and simplify the Autotools build considerably by removing all
the extra CXX targets.
It was originally added to make bisecting easier,
but has outlived its usefuleness now.
Going forward we'll have just a single cairo-version.h
header file, the one with the real version numbers.
This is needed to fix the case where cairo is being
built as a Meson subproject, but also simplifies
things in general.
Fixes#421
This removes code that uses the cogl-path library, which was not
used except when manually modifying a preprocessor flag. It could
not use path caching, was slightly broken, and all of its
functionality was provided better by different code paths.
Signed-off-by: George Matsumura <gmmatsumura01@bvsd.org>
This redesigns the path cache so that it does not mess with the
context functions, thereby hopefully making it much more resilient
to changes in the rest of cairo that change the way the default
context works. It is also much simpler, and it is anticipated that
it will be more maintainable. Performance in contrast to the old
cache design speeds up most traces in cairo-perf-trace, and slows
down only a lesser few by <20%.
Signed-off-by: George Matsumura <gmmatsumura01@bvsd.org>
This completes the full set of PDF/PS image filters allowing image
data to be passed though without decompressing then recompresssing in
a less efficient format.
The difficulty with CCITT_FAX is it needs some decoding parameters
that are not stored inside the image data. This is achieved by using
an additional mime type CCITT_FAX_PARAMS that contains the params in
key=value format.
This improves the OpenGL ES support to extend it to version 3.0.
A number of new features are available in glesv3 including creation of
multi-sampled renderbuffers. These renderbuffers can be blitted to
single sample textures (but not the other way around). Other features
such as PBO for image uploading, are left as followon work.
For this preliminary implementation, glesv3 backends always create
renderbuffers, which can be set as single sample or multisample. The
renderbuffer's content is blitted to the texture only when used as a
source or a mask.
Images uploaded to a texture stay there until the surface is used as a
rendering target, at which point its painted to the renderbuffer.
This patch is heavily based off of Henry Song's initial GLESv3 patch
6f7f3795 from his cairogles fork of Cairo, and incorporates subsequent
fixes and pertinent refactorings from his trunk and review feedback from
Uli.
This implements the *functional* support for glesv3, excluding the
various optimization work to utilize its features. Rendering and
performance should not be expected to improve notably from pure glesv2.
As the GL backend for Cairo remains "experimental", these changes should
likewise be considered as such.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
These typedefs and defines are part of the libdrm API and therefore should
be taken from there, instead of own redundant declarations.
Signed-off-by: Enrico Weigelt, metux IT consult <enrico.weigelt@gr13.net>
As the target renderers operate at a different sample resolution then we
use internally for coordinate representation, there is always a potential
for discrepancies in the line gradients when passing around trapezoids.
To overcome this, the protocol specification of trapezoids uses the full
lines and vertical range as opposed to vertices and so long as we always
use the same lines for conjoint trapezoids, they remain abutting in the
rasteriser.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=84115
Testcase: bug-84115
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
There is a similar code in the Xlib backend. The logic here is the same, but
XCB doesn't support X resources directly, so there is some custom code
to get and parse the resources from the root window.
Signed-off-by: Lukáš Lalinský <lukas@oxygene.sk>
Reviewed-by: Uli Schlachter <psychon@znc.in>
Whilst it cannot handle self-intersecting strokes (which includes the
antialias region of neighbouring lines and joints), it is about 3x
faster to use than the more robust algorithm. As some backends delegate
the rendering, the quality may still be preserved and so they should be
responsible for choosing the appropriate method for generation of the
stroke geometry.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
I suspect I may split the win32 code into a few more files, so move it
to its own directory to reduce the clutter.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
This is initially based around the requirements for handling internal
fallbacks to the image compositor and reducing the number of pixels
required to be transferred.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
As discussed, overloading the cairo_surface_t semantics to include
sources (i.e. read-only surfaces) was duplicating the definition of
cairo_pattern_t. So rather than introduce a new surface type with
pattern semantics, start along the thorny road of extensible pattern
types.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
This adds a new GPU accelerated backend for Cairo based on the Cogl 3D
graphics API.
This backend aims to support Cairo in a way that translates as naturally
as possible to using a GPU, it does not strive to compete with the
anti-aliasing quality of the image backend if it can't be done
efficiently using the GPU - raw performance isn't the only metric of
concern, so is power usage.
As an overview of how the backend works:
- fills are handled by tessellating paths into triangles
- the backend has an extra fill_rectangle drawing operation so we have
a fast-path for drawing rectangles which are so common.
- strokes are also tessellated into triangles.
- stroke and fill tessellations are cached to avoid the cpu overhead
of tessellation and cost of upload given that its common for apps to
re-draw the same path multiple times. The tessellations can survive
translations and rotations increasing the probability that they can be
re-used.
- sources and masks are handled using multi-texturing.
- clipping is handled with a scissor and the stencil buffer which
we're careful to only update when they really change.
- linear gradients are rendered to a 1d texture using a triangle
strip + interpolating color attributes. All cairo extend modes
are handled by corresponding texture sampler wrap modes without
needing programmable fragment processing.
- antialiasing should be handled using Cogl's multisampling API
XXX: This is a work in progress!!
TODO:
- handle at least basic radial gradients (No need to handle full
pdf semantics, since css, svg and canvas only allow radial gradients
defined as one circle + a point that must lie within the first
circle.) - currently we fall back to pixman for radial gradients.
- support glyph rendering with a decent glyph cache design. The
current plan is a per scaled-font growable cache texture + a
scratch cache for one-shot/short-lived glyphs.
- decide how to handle npot textures when lacking hardware support.
Current plan is to add a transparent border to npot textures and use
CLAMP_TO_EDGE for the default EXTEND_NONE semantics. For anything else
we can allocate a shadow npot texture and scale the original to fit
that so we can map extend modes to texture sampler modes.
Having spent the last dev cycle looking at how we could specialize the
compositors for various backends, we once again look for the
commonalities in order to reduce the duplication. In part this is
motivated by the idea that spans is a good interface for both the
existent GL backend and pixman, and so they deserve a dedicated
compositor. xcb/xlib target an identical rendering system and so they
should be using the same compositor, and it should be possible to run
that same compositor locally against pixman to generate reference tests.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
P.S. This brings massive upheaval (read breakage) I've tried delaying in
order to fix as many things as possible but now this one patch does far,
far, far too much. Apologies in advance for breaking your favourite
backend, but trust me in that the end result will be much better. :)
Add the cairo_time_t type (currently based on cairo_uint64_t) and use
it in cairo-observer and in the perf suite.
Fixes the build on MacOS X (for the src/ subdir) and Win32, whch
failed because they don't provide clock_gettime:
cairo-surface-observer.c:629: error: implicit declaration of function 'clock_gettime'
cairo-surface-observer.c:629: warning: nested extern declaration of 'clock_gettime'
cairo-surface-observer.c:629: error: 'CLOCK_MONOTONIC' undeclared (first use in this function)
...
The immediate use of this is to print out the slowest operation of each
type in a replayable manner. A continuing demonstration of how we may
analyse traces...
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
In step 1 of speeding up stroking, we introduce contours as a means for
tracking the connected edges around the stroke. By keeping track of
these chains, we can analyse the edges as we proceed and eliminate
redundant vertices speeding up rasterisation.
Coincidentally fixes line-width-tolerance (looks like a combination of
using spline tangent vectors and tolerance).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
