$ ./check-doc-syntax.sh
Checking documentation for incorrect syntax
./cairo-pattern.c (3342): ERROR: Will invalid doc id (should be 'cairo_...:')
The proposed changes fixes the warning about the documentation style used in cairo.
Signed-off-by: Ravi Nanjundappa <nravi.n@samsung.com>
malloc(0) needn't return NULL, and on glibc, doesn't. Then we encounter
a loop of the form do { ... } while (--c), which doesn't do quite what
you were hoping for when c is initially 0.
Since there's nothing to swap in this case, just bomb out.
Signed-off-by: Adam Jackson <ajax@redhat.com>
malloc(0) needn't return NULL, and on glibc, doesn't. Then we encounter
a loop of the form do { ... } while (--c), which doesn't do quite what
you were hoping for when c is initially 0.
Since there's nothing to swap in this case, just bomb out.
Signed-off-by: Adam Jackson <ajax@redhat.com>
since the PS Document Structing Conventions impose a 255 character
line limit. PDF does not require wrapping.
pdf-operators is designed to emit the same output for PS and PDF.
Unfortunately some PDF interpreters don't like strings split with
'\\\n' and some PS interpreters don't like strings split with ')('.
So we are forced to make pdf-operators handling string wrapping
differently for PDF and PS.
Bug 85662
These two images are mis-rendered (clearly evident from visual
inspection). By removing them, the test will fall back to the more
general format-specific images, huge-radial.argb32.ref.png and
huge-radial.rgb24.ref.png.
Note that the huge-radial.pdf tests still fail to pass, but the pdiff
looks more sensible.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66218
Signed-off-by: Bryce Harrington <bryce@bryceharrington.org>
$ ./check-doc-syntax.sh
Checking documentation for incorrect syntax
./cairo-pattern.c (3346): ERROR: Will bad line: ' */'
./cairo-pattern.c (3346): ERROR: Will documentation comment not closed with **/
./cairo-pattern.c (3422): ERROR: _cairo_pattern_sampled_area invalid doc id (should be 'cairo_...:')
The warnings are about the documentation style used in cairo
Signed-off-by: Ravi Nanjundappa <nravi.n@samsung.com>
the active edges list must be left sorted at the next possible use
and since full_row does not deal with intersections it is not usable
when there is an intersection in the top half of the next row first
subrow
Reported-and-tested-by: Matthew Leach
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85151
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
New implementations of _cairo_pattern_sampled_area and _cairo_pattern_get_extents
which produce a more accurate bounding box. These do not depend on side-effects
of analyze_filter, can handle different horizontal and vertical scales, filters
wider than 1 for down-scaling, and compute a somewhat tighter bounding box
in most cases.
I removed the pad output of _cairo_pattern_analyze_filter as it is unused.
Reviewed-by: Bryce Harrington <b.harrington@samsung.com>
It will not use the fallback if the symbols in the previous patch
are turned on.
Also some code rearrangement to make this resemble the xlib version
more and to remove some suspect bugs. In particular meshes should not
work just because the translation is an integer.
Reviewed-by: Bryce Harrington <b.harrington@samsung.com>
Currently these are always false, but if XRender use a pixman that
supports filtering these could be turned on for that version.
Reviewed-by: Bryce Harrington <b.harrington@samsung.com>
Fallback is not used if the symbols defined in the previous patch to
indicate if XRender does GOOD/BEST are true.
This patch also includes some changes to take advantage of the fact that
if there is an integer translation analyze_filter will already have set
the filter to NEAREST.
Reviewed-by: Bryce Harrington <b.harrington@samsung.com>
Currently these are always false, but if some version of xlib uses
a pixman supporting filtering they could be changed to return true
for that version.
Reviewed-by: Bryce Harrington <b.harrington@samsung.com>
The analysis to deterimine if the GOOD filter can be replaced with
the BILINEAR filter is moved to this function so it can be used
by backends other than the image backend.
Reviewed-by: Bryce Harrington <b.harrington@samsung.com>
The pixman downscaling "95" tests attempt to rescale a 96x96 pixmap to
95x95. Ideally the borders between color areas should be sharp, but for
this use case we allow for 1 pixel of blur between the areas as
acceptable. The choice of what color to use for this blurred region is
not important, and in fact varies from backend to backend.
The old reference images were generated by Krzysztof Kosiński's
downscaling algorithm. These new images are against the algorithms
written by Bill Spitzak.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
There are cases where the rendered output of a test can vary from
backend to backend in ways which are visually acceptable. This is why
we have reference images in the first place. In these cases, changes to
the rendering logic can result in slight differences in the output that
is also within acceptable visual limits.
We see this in the pixman downscaling tests. This script is introduced
as a way to more easily update the reference images after a renderer
change.
This script is intended to be expanded to handle updating of references
for other tests as we identify similar issues. The intent is that this
script then serves as a way to document these exceptional cases.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Fixes a make check error.
Checking that .libs/libcairo.so has the same symbol list as cairo.def
126a127
> cairo_lines_compare_at_y
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=84638
Signed-off-by: Bryce Harrington <b.harrington@samsung.com>
The quartz-image backend uses _cairo_surface_is_quartz(), which
therefore needs to be made available to it. Fixed as suggested by
Bryce in the referenced bugreport.
References: https://bugs.freedesktop.org/show_bug.cgi?id=84569
Signed-off-by: Andrea Canciani <ranma42@gmail.com>
When investing the symmetry of the raterisation, we want to have a
simple replay of all of the original geometry through a the flipped
recording surface. This reduces the worry about artifacts from the
clipped rendering.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
As pixman uses an accumulation mask, it oversamples neighbouring edges
within a cell. We can reduce the impact of this by eliminating
overlapping triangles/trapezoids from being passed into pixman.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(And include a git add missed from commit
ccd48b3464
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue Sep 30 14:06:21 2014 +0100
test: Remove more duplicated reference images
but were mostly invalidated by the rasteriser changes anyway).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
If all the edges start at the very beginning of the whole row, we can
merge them and include check for intersections/endings during the row.
This allows us to enable fast analytic processing for even the very
first row on pixel aligned vertices.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
We use two different methods within tor to compute the coverage.
The first is that we iterate over every sample point within the pixel
and see if it is covered. The second is that we look at a whole pixel
and analytically compute the coverage inside (if we have no
intersections within that row).
One side effect of
commit 03c3d4b7c1
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue Sep 30 08:44:43 2014 +0100
tor: Fix loss of precision from projection onto sample grid
was to compute our X coordinates for the sample locations (offset by
half a subrow) and that in order to compute the analytical pixel
coverage correctly, we therefore need to backstep by half the subrow to
the pixel boundary.
References: https://bugs.freedesktop.org/show_bug.cgi?id=84396
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
In order to check the behaviour of the analytic rasteriser inside tor,
let's compare it against a very simple rasteriser that uses a rectiliner
256x256 sample grid.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Using CAIRO_OPERATOR_OVER in case causes oversampling of the coincident
edges, to measure coverage we should only use ADD. :|
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
