* Convert NETWORK_MODE_* constants to IW_MODE_*
* Make all the get_mode/set_mode functions take and return 'int'
* Convert D-BUS calls that pass mode to DBUS_TYPE_INT32 rather than UINT32
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1142 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Replace the "driver support level" stuff with capabilities. The
capability field is a bitfield that is more flexible than the
old driver support level thing. It's mostly so we can easily
figure out what supports WPA and what doesn't, but should be
quite useful later.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1007 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Shorten time taken to sleep by fastpathing bits of device deactivation
necessary for sleep.
* Fix issue where deactivating a device might deactivate the active
VPN connection, even if the VPN was not using the device.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@985 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* NetworkManager.h:
* gnome/applet/applet-dbus-info.c:
* gnome/applet/applet-dbus-info.h:
* gnome/applet/applet.c:
* gnome/applet/applet.h:
* src/NetworkManager.c:
* src/NetworkManagerDbus.c:
* src/NetworkManagerDbus.h:
* src/NetworkManagerDevice.c:
* src/NetworkManagerDevice.h:
* src/NetworkManagerMain.h:
* src/NetworkManagerWireless.c:
* src/NetworkManagerWireless.h:
* src/nm-dbus-nm.c:
Make NetworkManager be smart about how frequently to scan
based on its current state. Remove the UI for choosing when
to scan. Scanning still may disabled completely by the user
via the "Wireless Enabled" menu item.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@958 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDevice.[ch]
src/NetworkManagerPolicy.c
src/NetworkManager.c
src/nm-dbus-nm.c
- Remove the "just_added" parameter from nm_device_deactivate(). We no
longer send the DeviceNoLongerActive signal unconditionally, but only
when the device is actually active.
* dispatcher-daemon/NetworkManagerDispatcher.c
- (nmd_execute_scripts): convert to GLib directory functions from opendir(),
and simplify the logic
- (nmd_get_device_name): copy value from dbus reply so we don't segfault when
we free it later on
* initscript/RedHat/Makefile.am
initscript/RedHat/NetworkManagerDispatcher
- Add initscript for NetworkManagerDispatcher
Patch from Bill Moss:
* dispatcher-daemon/NetworkManagerDispatcher.c
- Remove IP4AddressChange signal code including nmd_get_device_ip4_address()
* src/NetworkManagerDbus.c
- (nm_dbus_signal_device_ip4_address_change): remove. If the device goes up,
and DeviceNowActive gets signaled, then the device has a new IP address
anyway. There's no need for a separate signal.
* src/NetworkManagerDevice.c
- (nm_device_update_ip4_address): Don't send IP4AddressChange signal
* src/NetworkManagerPolicy.c
- (nm_policy_activation_finish): Send DeviceNowActive signal when the device
activates successfully. This kind of went missing when I reworked the
activation code.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@634 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Kill dhcpcd. We now use "dhcdbd", a dbus daemon that controls dhclient.
This means that NetworkManager shouldn't have DHCP issues anymore. It also
means you need dhcdbd, which you can get here (get the latest one):
http://people.redhat.com/jvdias/dhcdbd/
Technically NetworkManager can use any DHCP daemon that uses the same DBUS
interface as dhcdbd.
* Rewrite device activation to facilitate the new DHCP infrastructure and
future improvements. Its now "activation request" based, ie there is a single
activation request composed of the device, access point, and other info which
follows the entire activation process. There are 5 stages of the activation
process which correspond to:
1) Device preparation
2) Device configuration (bring it up, set ESSID/Key/etc)
3) IP Config Start (fire off DHCP if we're using it)
4) IP Config Get (grab config from DHCP or static config files)
5) IP Config Commit (set device's IP address, DNS, etc)
Note that there is no longer a "scanning" step, since the access point must
be known _before_ activation starts. If the access point drops out or does
not exist for some reason, the entire activation process fails and must be
restarted for a different access point or device.
Patch from Bill Moss:
* gnome/applet/applet.c
- Fix type of vpn_failure dialog -> vpn_banner dialog
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@597 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Merge the applet and the info-daemon, and move the converged
applet under gnome/applet
* Move libnm_glib to gnome/libnm_glib
* Convert most dbus calls between the applet, info-daemon, and NM
into async calls
* Fix a few things valgrind noticed
* Make NM broadcast state more reliably
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@586 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Initial VPN Support
- supports 'vpnc'
- reworks device IP configuration, backend files have changed and will need
to be updated for all distributions. I will try to do what I can for
them, but I cannot test them.
- Move named directory to src/named-manager
- Make backends directory self-contained
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@571 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Tighten up handling of wireless devices that don't support wireless
scanning (ie, Orinoco). Due to restructuring of code, these devices
hadn't been doing pseudo-scanning for a while either and would just
spin waiting for an access point. They are now manual devices where
the user must choose the access point from the menu every time. All
"allowed" access points are listed in the applet's menu regardless
of whether or not they can be seen by the card, since it can't scan
anyway.
* src/NetworkManager.c
- (nm_wireless_link_state_handle): new function, but only update
the "best" ap for non-scanning devices when its not activating,
and when no device is being forced on the card
- (nm_link_state_monitor): split wireless link state handling out
into separate function
* src/NetworkManagerDevice.c
- (nm_device_copy_allowed_to_dev_list): new function
- (nm_device_new): populate non-scanning cards' AP lists with
access points from the "allowed" list
- (nm_device_new): don't start a scanning timeout for devices that
can't scan
- (nm_device_activation_schedule_finish): new parameter, should be
the AP that failed to be connected to, pass it on to the
activation finish function in NetworkManagerPolicy.c
- (nm_device_activate_wireless): don't ever try to get a new AP
for non-scanning devices, just fail. The user must choose
a new access point manually.
- (nm_device_activate): grab the AP that failed connection and
pass it on
- (nm_device_update_best_ap): Clear the best AP if we don't have
a link to it, user must manually choose a new one
- (nm_device_do_pseudo_scan): remove function
- (nm_device_wireless_process_scan_results): remove bits for non-
scanning cards since they never get here
- (nm_device_wireless_scan): remove bits for non-scanning devices,
and fake the scan list for test devices a bit earlier
* src/NetworkManagerPolicy.c
- (nm_policy_activation_finish): use the failed_ap that we get
passed rather than getting the best_ap from the card, which
may have changed since we were scheduled
- (nm_policy_allowed_ap_list_update): for non-scanning devices,
update their scan list directly from the allowed list when
we get updates to the allowed list from NetworkManagerInfo
* src/NetworkManagerPolicy.h
- New member for failed access point in NMActivationResult
-------------------------------------
Driver Notification patch: notifies the user when their driver
sucks. Gives them the option to ignore further insertions
of the card that has the sucky driver.
* NetworkManager.h
- Remove the SEMI_SUPPORTED member from the NMDriverSupportLevel
enum and replace it with NO_CARRIER_DETECT and
NO_WIRELESS_SCAN
* panel-applet/NMWirelessApplet.[ch]
- Merge essid.glade -> wireless-applet.glade
- Implement the "Your driver sucks" notification dialog
* panel-applet/NMWirelessAppletDbus.c
- Change stuff from getSupportsCarrierDetect->getDriverSupportLevel
- Grab hardware address for each device from NM too
- Check whether the driver for each device sucks or not whenever
a new device is noticed
* panel-applet/NMWirelessAppletOtherNetworkDialog.c
- Deal with stuff being in wireless-applet.glade now rather than essid.glade
* src/NetworkManager.c
- Fix a double-unref on device removal
* src/NetworkManagerUtils.c
- Set appropriate driver support level on a device that doesn't
support scanning or carrier detection
* src/nm-dbus-device.c
- New "getHWAddress" dbus method on devices
- getSupportsCarrierDetect -> getDriverSupportLevel
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@534 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Third (unfinished, partially working) cut at porting to
dbus 0.30 api and new hal.
* info-daemon/NetworkManagerInfoDbus.c:
don't free null arrays.
* panel-applet/NMWirelessAppletDbus.c:
* src/nm-dbus-device.c:
* src/nm-dbus-net.c:
* src/NetworkManagerDbus.c: more
STRING -> OBJECT_PATH fun
* src/NetworkManagerDevice.c:
* src/NetworkManagerDevice.h:
(rename nm_device_get_link_active): rename to
nm_device_has_active_link
(nm_device_wireless_link_active): rename to
nm_device_probe_wireless_link_state
(nm_device_wired_link_active): rename to
nm_device_probe_wired_link_state. Rewrite to
use carrier file since hal doesn't maintain
link state anymore.
(nm_device_update_link_active): rename to
nm_device_update_link_state
* src/NetworkManagerPolicy.c
(nm_policy_activation_finish): check for NULL
MAC address.
* src/Makefile.am:
* src/NetworkManagerMain.h:
* src/NetworkManager.c:
* src/nm-netlink-monitor.c:
* src/nm-netlink-monitor.h: New class to support
monitoring wired ethernet link status, since HAL
doesn't export that information anymore.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@495 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Dan Reed: DHCP options D-BUS API
Exposes the DHCP options that a device receives to clients over D-BUS.
* configure.in
- A few cleanups
* dhcpcd/client.h
- Correct names, option length, and types for DHCP options
* dhcpcd/dhcpcd.[ch]
- Clarify function names that access DHCP options & data
* src/NetworkManagerDHCP.c
- Use new DHCP data access functions
* src/NetworkManagerDbus.c
- Message handler for DHCP functions
* src/nm-dbus-dhcp.[ch] (new)
- DHCP dbus methods
* test/nm-dhcp-opt-test.c
- Test DHCP D-BUS API and return all present DHCP options
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@444 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessApplet.[ch]
- Add a context menu that contains:
Pause/Resume Wireless Scanning
Stop/Start All Wireless Devices
About...
- Grab active device strength off active device,
not its network
* panel-applet/NMWirelessAppletDbus.[ch]
- Add DBUS accessors for "getSupportsCarrierDetect", "setScanningEnabled",
"getScanningEnabled", "setWirelessEnabled", and "getWirelessEnabled"
- Update active device strength every 2 seconds, not every 1 second
* panel-applet/menu-info.c
- Only disable wired devices in the menu when they support carrier detection,
and don't currently have a link. Non-carrier-detect devices will always
remain choosable
* src/Makefile.am
src/NetworkManagerDbusUtils.[ch]
- Add new new dbus utils sources
* src/NetworkManager.c
- Fixes for new link detection, we no longer need to call nm_device_update_link_active()
with the boolean parameter
- Set scanning_enabled & wireless_enabled to TRUE
* src/NetworkManagerDbus.c
- Use new dbus util method dispatcher functions for org.freedesktop.NetworkManager methods
- Implement scanning & wireless enable/disable calls
- Remove the dbus vtable unregister handlers, weren't doing anything with them anyway
* src/NetworkManagerDevice.c
- New link detection stuff again...
o Create device's mainloop earlier (but don't run it earlier)
o Hook up new carrier-detect support stuff
o Add in the ethtool & mii support detection code
- Don't scan if scanning is disabled
* src/NetworkManagerPolicy.c
- Never automatically choose a device that doesn't support carrier detection
- Don't automatically choose a wireless device if wireless is disabled
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@416 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfoDbus.c
- (nmi_dbus_nmi_message_handler): make sure 'dialog' exists before using it
* src/NetworkManagerDevice.c
- (nm_device_new): Don't store the entire range struct, use only what we need
(which is currently avg_quality, max_quality, and frequencies). Also
zero device structure when we've free'd it to maybe expose errors down
the line.
- (nm_device_update_signal_strength): grab the scan mutex before getting
quality data from the card since quality will be useless during a scan.
Call updated wireless qual-to-percent function with values stored in
nm_device_new() earlier.
- Remove some unused functions (nm_device_get_max_quality(), nm_device_get_noise(),
nm_device_get_bad_crypt_packets())
- (nm_device_activate_wireless_adhoc): use new frequency values we go in
nm_device_new()
- (get_initial_auth_method): always use the Auth method that's in the allowed
list if available. Problem was this: when the WEP key is wrong, NM will
try OS then SK modes, and then get stuck in SK mode after that. This
should reset it.
- (nm_device_wireless_process_scan_results): work with new qual-to-percent
function
* src/NetworkManagerWireless.c
- (nm_wireless_qual_to_percent): try to make this function actually work and
mimic iwlib behavior. Use card's idea of quality divided by max_qual
if that's all present, otherwise fall back to signal-to-noise ratios.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@402 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Cache last-known-good wireless authentication method in
NetworkManagerInfo, and use that method first during
wireless device activation. Should speed up devices that
need Shared Key authentication method since Open System is
now the default.
* Remove the hack to not do full activation on wired connections
that are active when we launch, it causes too many problems
with name resolution and was a hack in the first place.
* Re-work wireless device activation again somewhat to have a
clearer chain of events and to use last-known-good
authentication method of the access point. Also provide
better status throughout activation to ensure the applet
can tell the user exactly what's going on.
* Remove the "find wireless network" code and now simply attempt
to activate with that access point. This reduces the delay
between selecting "Other wireless Network" and actually
connecting to that network.
* Correctly stop the device's worker thread when its removed.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@388 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* dhcpcd/client.c
- Remove some debug messages
- Wrap others in #ifdef DEBUG/#endif
* src/NetworkManager.c
- Remove some debug messages
- Clarify some debug messages
- Remove code related to old single-thread wireless scanning
* src/NetworkManagerAP.[ch]
- New AP property "last_seen" to track how recently an AP was
found in a scan
- Start using 'const' more in function arguments
* src/NetworkManagerAPList.[ch]
- (nm_ap_list_merge_scanned_ap): new, selectively update attributes
of an AP found in an AP list from a source AP, or if not found
in the list add the source AP
- (nm_ap_list_combine): remove, no longer needed
* src/NetworkManagerDevice.c
- Each device now has a "worker" thread from start to end of its life.
Scanning for wireless devices now happens in that thread,
not in a single "wireless scanning thread" for all devices as
previously. Activation consists of adding an idle handler to the
thread's main loop/context, which gets run at the next available
opportunity.
- Wireless scanning is also simplified, there is now only one list of
access points per wireless device, and APs older than 60s are
removed from the list. Previously, we kept results for the last
3 scans and merged whole lists, which was complicated.
- Cleaned up activation debug messages.
- Wireless activation and access-point search routines now use Open System
authentication before trying Shared Key.
- Removed some code in nm_device_update_best_ap() that could cause cards
to loose their link to the access point.
- Scanning now uses a backoff algorithm, where the inverval becomes
progressively longer between scans when the list of scanned access
points doesn't change. A change will revert to the shortest scan
interval (20s).
* src/NetworkManagerWireless.[ch]
- Remove code related to old single-thread wireless scanning
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@382 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* dhcpcd/client.c
- Rework the DHCP client code to be much less chatty when
it receives non-DHCP UDP packets during the DHCP run
(reported by and preliminary patches from Bill Moss)
* Move wireless scanning to a separate thread. This thread forwards the
results to the main thread when done where they are integrated into
the device's access point lists. This keeps the main thread (which
does all the DBUS communication) from being blocked for long periods
of time by wireless scanning.
* Make state modification an idle routine in the main loop, and trigger
state changes rather than polling for them.
* src/backends/NetworkManagerGentoo.c
- Fix up invalid C90 code (reported by Christoph Ruessler)
* src/NetworkManagerDevice.c
- Revert IPv6 patch for wired devices from 2004-12-22 for
router advertisements, causing problems and infinite loop
during "best" device determination due to link going up/down
(reported by Bill Moss)
Apply patch from Peter Jones
* src/NetworkManagerDevice.c
- Shortcut for link-checking for ipw2x00 cards
- Split out association check into separate routine
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@360 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Tom Parker
* Add autoip/Link Local Addressing support when we fail to get a DHCP
address
* Longer pause after setting ESSID on cards that support a larger number
of channels to give the card time to find the right channel
* Add system hook to restart mDNSResponder (or whatever the local implementation
of Multicast DNS is) when we activate interfaces
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@341 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDevice.[ch]
- (nm_device_clear_activation_fail): new function
* src/NetworkManagerPolicy.c
- (nm_state_modification_monitor): clear the activation_failed flag on devices
when we've dealt with the failure so the user doesn't get failure-dialog-spammed
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@317 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Major rework of link detection code. We now use DHCP
as part of the link detection which proves to be much more robust,
and also supports Open System authentication for wireless networks.
We no longer use external DHCP client programs. Instead, we use
our own DHCP client, based on substantially reworked bits of 'dhcpcd'
which was written by:
Yoichi Hariguchi <yoichi@fore.com>
Sergei Viznyuk <sv@phystech.com>
http://www.phystech.com/download/
It resides in the "dhcpcd" directory and was refactored into a general
purpose DHCP client library by me.
Also misc fixes (CPPFLAGS->AM_CPPFLAGS, move some stuff around),
move src/backends/NetworkManagerSystem.h -> src/NetworkManagerSystem.h
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@314 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDevice.[ch]
- (nm_device_set_enc_key): Add parameter to set Authentication
Mode (Open System, Shared Key, or None). We're still using
Shared Key for now though.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@289 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessAppletOtherNetworksDialog.[ch]
- New files, implement the "Other wireless network" dialog
* panel-applet/NMWirelessApplet.c
- Move "other wireless network" dialog to separate file
* panel-applet/NMWirelessAppletDbus.[ch]
- Take key and key_type paramaters for the set_device function
* panel-applet/essid.glade
- Add UI bits for encryption settings
* src/NetworkManagerDbus.c
- Retrieve key and key_type params for "setActiveDevice" method call
and pass them on
- unref AP returned from nm_device_get_best_ap() when needed
* src/NetworkManagerDevice.c
- (nm_device_get_best_ap): ref the ap before returning it
- unref AP returned from nm_device_get_best_ap() when needed
- (nm_device_activate_wireless): add "ap" parameter so we don't
need to call nm_device_get_best_ap() here, it was pretty much
redundant anyway
- (AP_NEED_KEY): break second link check condition out into separate
function, and fix segfault when ap->enc_key_source was NULL
- (nm_device_find_and_use_essid): take key and key_type parameters and
pass them along to nm_device_wireless_network_exists(). If the
network does exist, set the passed-in key+key_type on the AP
* src/NetworkManagerPolicy.c
- unref AP returned from nm_device_get_best_ap() when needed
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@277 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfoDbus.c
- Trap the "DeviceActivationFailed" signal
* docs/NetworkManager DBUS API.txt
- Add "DeviceActivationFailed" signal
* panel-applet/NMWirelessAppletDbus.c
- Quash the "NetworkManager service not available" message
* src/NetworkManagerDbus.[ch]
- Add the "DeviceActivationFailed" signal
* src/NetworkManagerDevice.c
- Add support for activation_failed flag
- Fix deadlock where activation thread didn't clean itself up, making
main thread still believe it was alive forever (didn't reset activation
flags like activating, just_activated, etc when IP configuration
failed)
* src/NetworkManagerPolicy.c
- Implement logic for DeviceActivationFailed signal, and when activation fails
for wireless networks, try to fall back to some other access point
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@268 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* NetworkManager.h
- New file, now contains commonly used structures and bits
for the dbus API of NetworkManager
* Makefile.am
- Deliver NetworkManager.h to ${includedir}/NetworkManager
* src/NetworkManager.h
- Rename -> src/NetworkManagerMain.c
* Various fixups all around to use NetworkManager.h and new
src/NetworkManagerMain.h, remove redundant bits that got
moved into NetworkManager.h
* src/NetworkManagerDevice.[ch]
src/NetworkManagerUtils.[ch]
src/NetworkManagerPolicy.c
src/NetworkManagerDbus.c
- Whitelist wireless drivers, and blacklist some wired
drivers. Also blacklist cipsec and ethernet-over-usb
devices at this time (RH #135722, RH #135648)
- Don't leak unsupported devices out over dbus, or allow
them to be set as the active device. Skip over them
during automatic device picking
* test/nmclienttest.c
- Clean up the dbus code a lot
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@261 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerAP.[ch]
- Add "artificial" get/set functions, set for APs that
aren't discovered as part of a scan but instead
discovered by force-setting the ESSID
* src/NetworkManagerDevice.[ch]
- (nm_device_wireless_network_exists): pass back whether
or not the discovered AP was encrypted. Also, try
falling back to encrypted mode on the card if unencrypted
association doesn't work
- (nm_device_find_and_use_essid): If the network requested
did in fact exists, but it wasn't in our scan list, add
an "artificial" entry for it. Some Cisco cards don't
see non-ESSID-broadcasting APs in their scan but can still
associate with them if you know the ESSID, this works around
that behavior
- (nm_device_do_normal_scan): Carry "artificial" APs over from scan
to scan if the card is currently associated with that AP
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@244 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* NEWS
src/NetworkManagerDevice.[ch]
src/backends/NetworkManagerDebian.c
src/backends/NetworkManagerGentoo.c
src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerSlackware.c
- Add support for grabbing and using a broadcast address
from system config files
- Some Gentoo backend fixes for grabbing network config
- Fix LOG_WARN->LOG_WARNING
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@239 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManager.c
- Only accept and manager 802.3 and 802.11 devices
* src/NetworkManagerDbus.[ch]
- (nm_dbus_nm_set_active_device): move most of the actual activation
logic into NetworkManagerDevice.c
- (nm_dbus_network_status_from_data): new function
- (nm_dbus_signal_network_status_change): new function, unused for now
- (nm_dbus_nm_message_handler): use nm_dbus_network_status_from_data () now
* src/NetworkManagerDevice.[ch]
- (nm_device_find_and_use_essid): new function. Search for, and if found use,
a random ESSID.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@231 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessApplet.c
- Add function to print out applet_state in a readable
manner
* src/NetworkManager.c
- (main): Don't segfault when nm_dbus_init() fails, we had
a left-over call to hal_shutdown() into which we passed NULL
* src/NetworkManagerAP.c
- (nm_ap_set_essid): Allow NULL essids
* src/NetworkManagerAPList.[ch]
- More use of nm_ap_list_[un]lock ()
- (nm_ap_list_get_ap_by_essid): don't warn when looking for a NULL
network/essid, just return nothing. Also skip over NULL
essid access points in the list when searching
- (nm_ap_list_get_ap_by_address): new function
- (nm_ap_list_update_network): set the access point's key source to
NULL when the key returned from NetworkManagerInfo is NULL or
of 0 length
- nm_ap_list_update_keys() -> nm_ap_list_update_properties(), and
copy timestamp over too
- (nm_ap_list_copy_essids_by_address): new function, attempt to
find the correct ESSID for a blank-essid access point by searching
through another list and matching access point MAC addresses
- (nm_ap_list_diff): exclude blank-essid access points from the diffs
* src/NetworkManagerDbus.c
- (nm_dbus_nm_set_active_device): deal with random networks the user
may specify. This is mainly for access points that don't
broadcast their essid. So if the user tells us to associate with
some random ESSID that's not in our access point list, we find
out if the access point does in fact exist (by attempting association
and then matching that access point's MAC address with the essid the
user gave us) and then we switch to it.
- (nm_dbus_devices_handle_request): don't add blank-essid access points
to the returned list of networks for the "getNetworks" method
* src/NetworkManagerDevice.[ch]
- Extra debugging info for link detection
- (nm_device_ap_list_get_ap_by_address): new function, return an AP
based on MAC address
- (nm_device_get_path_for_ap): ignore blank-essid access points
- (nm_device_wireless_network_exists): new function, find out whether
a random ESSID exists by attempting to associate with it
- (nm_device_do_normal_scan): allow blank-essid access points in our
device list as long as they have an AP MAC address we can use.
Also send WirelessNetwork[Dis]Appeared signals for non-active
devices too. Lets the applet update more frequently.
* src/backends/NetworkManagerGentoo.c
- Patch from: Robert Paskowitz
- Update backend code for Gentoo
- Implement nm_system_device_update_config_info ()
* test/nmclienttest.c
- (set_network_device): new function, takes a command-line argument
and tells NetworkManager to use that wireless network
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@222 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessAppletDbus.c
- New functions:
wireless_network_new
wireless_network_copy
network_device_new
network_device_copy
* src/NetworkManagerDevice.[ch]
- New functions:
nm_device_set_mode_managed
nm_device_set_mode_adhoc
- Use these functions where appropriate
- When creating a new wireless device, force the card
to managed/Infrastructure mode as soon as possible
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@216 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerAP.c
- (nm_ap_new, nm_ap_new_from_ap): Don't crash when we don't have
enough RAM to allocate new AP structures, but return NULL instead
* src/NetworkManagerAPList.[ch]
- (nm_ap_list_is_empty): new function
- (nm_ap_list_combine): new function, combine two access point lists
- (nm_ap_list_copy_keys): new function, copy keys from one list
into another
* src/NetworkManagerDevice.[ch]
- Rename some functions to be clearer:
nm_device_get_best_ap_frozen -> nm_device_is_best_ap_frozen
nm_device_just_activated -> nm_device_is_just_activated
nm_device_activating -> nm_device_is_activating
nm_device_now_scanning -> nm_device_is_scanning
- Cache the last 4 scans so that the access point list is more stable.
We combine the lastest two scans and use that as the AP list,
and diff that combined list against the combination of the earliest
two cached scans for the WirelessNetworkAppeared/Dissappeared signals
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@210 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfo.[ch]
info-dameon/NetworkManagerInfoDbus.[ch]
info-daemon/NetworkManagerInfoPassphraseDialog.[ch]
- Preserve original label text in the passphrase dialog so that
it actually gets updated with the new network name the next
time around. Previously, we were overwriting it so you'd get
the wrong network name to enter a key for
- Add a "Key Type" combo to the passphrase dialog, user selects
encryption key type now, type is stored in GConf too
- Adjust NM<->NMI DBUS protocol to pass the key type back to NM too
* src/NetworkManagerAP.[ch]
- Remove all the encyption method magic. It's now set by the user
and NetworkManager retrieves the type of encryption key from
NetworkManagerInfo
* src/NetworkManagerAPList.[ch]
src/NetworkManagerDbus.[ch]
- Adjust to new way of setting encryption key and method
- Pull encryption method down from NMI along with key
* src/NetworkManagerDevice.[ch]
- Removed encryption method fallback magic as the method is now
determined by the user. This greatly simplifies the connection
logic.
- More robust connection/link logic. Besides removing the encryption
method fallback magic, check whether or not the card is receiving
invalidly encrypted packets, which usually indicates that we have
a bad WEP key set.
- Don't blindly forge ahead when DHCP fails (still not completely fixed)
* test/nminfotest.c
- Test out new "Key Type" stuff in the NMI passphrase dialog
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@195 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDevice.[ch]
src/NetworkManagerDbus.c
doc/NetworkManager DBUS API.txt
- Add a new status tag "scanning", which is set when there
is no active network connection, but NetworkManager is
looking for an access point to associate with
* panel-applet/main.c
- Cast the applet appropriately for gtk_widget_show_all ()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@192 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDevice.[ch]
- Add a slightly more robust method of determining if the WEP key
is correct or not, by checking the WEP-discarded packet count
on the card
* info-daemon/NetworkManagerInfo.c
- (nmi_gconf_notify_callback): Fix GConf essid escaping, should
un-escape values we pull out rather than escaping them
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@189 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* TODO: fix typo
* docs/NetworkManager DBUS API.txt
- Update for new signal strength changes
* panel-applet/NMWirelessApplet.c
- Make panel icon show strength of the current connection
- Cleanups and memleak fixes
* panel-applet/NMWirelessApplet.h
- Add data members for signal strength on devices and networks
* panel-applet/NMWirelessAppletDbus.c
- Free more DBusErrors
- Update for new signal strength changes
- Make devices and networks more like real objects, use ref/unref methods
- Actually unlock the mutex when updating the active device
* src/NetworkManagerAP.c
- Change AP functions and data members from "quality"->"strength"
* src/NetworkManagerDbus.c
- Kill "getMaxQuality" and "getQuality" methods
- Add "getStrength" methods for Networks and Devices
* src/NetworkManagerDevice.[ch]
- Add accessors for device strength
- Add functions to update strength for a device. Note that not all drivers
actually support signal strength for scanned access points (Atmel drivers
being one)
- Calculate signal strength for each AP during scan
* src/NetworkManagerWireless.[ch]
- Add function to return signal strength % from a device and a raw quality struct
* test/nmclienttest.c
- Update for new signal strength changes
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@156 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessApplet.c
panel-applet/NMWirelessAppletDbus.c
- Start using NetworkDevice/WirelessNetwork structures in more places
- Update for unified device/network forcing in NetworkManager
* src/NetworkManager.c
- some code consolidation
* src/NetworkManagerDbus.c
- (nm_dbus_nm_set_active_device): "setActiveDevice" now takes either one
or two arguments: the first is the NM ID of the device to switch to,
and the second (optional) argument is the ESSID of a wireless network
to use as well.
- Get rid of "setNetwork" method due to above change
* src/NetworkManagerDevice.c
- (nm_device_new): perform scan and update best AP on device creation
- nm_device_activation_cancel_if_needed()->nm_device_activation_should_cancel()
- nm_device_activation_signal_cancel()->nm_device_activation_cancel(), and
spin waiting for cancellation to finish before returning
* src/NetworkManagerPolicy.c
- Changes here clarify the situations in which a device switch occurs, and
make sure to keep using a forced device and network if the user gives
us one
- Remove old unused code
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@149 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/no-networkmanager.png
panel-applet/Makefile.am
panel-applet/NMWirelessApplet.c
- Add a "NetworkManager not running" icon and use it
- Use new consolidated GConf keys rather than Preferred/Trusted
* TODO: update
* info-daemon/NetworkManagerInfo.c
info-daemon/NetworkManagerInfoDbus.[ch]
info-daemon/NetworkManagerInfoPassphraseDialog.c
- There are now no longer two separate lists of wireless networks,
but one list where each network is "trusted" or not trusted
- Add a "getNetworkTrusted" dbus method
- "WirelessNetworkUpdate" signal now sent rather than
"PreferredNetworkUpdate/TrustedNetworkUpdate" signals
- Start freeing some dbus errors (not completed yet)
* info-daemon/passphrase.glade
- Remove the "don't show" hints for pager and taskbar
- Add a title since its going to be in the taskbar
* src/NetworkManager.[ch]
src/NetworkManagerAPList.[ch]
- There are now no longer two separate lists of wireless networks,
but one list where each network is "trusted" or not trusted
* src/NetworkManagerAP.[ch]
- Add get/set "trusted" accessors and data bit
* src/NetworkManagerDbus.[ch]
- Add function to get "trusted" status of a network from NetworkManagerInfo
- Trap new WirelessNetworkUpdate signal rather than old separate signals
* src/NetworkManagerDevice.[ch]
- Add per-device config data (ip4 addr, gateway, netmask) and accessors
- (nm_device_new): Get device config from backend when initializing devices
- (nm_device_activation_worker): Split out device configuration on
activation to deal with static/dynamic IP differences, and try encryption
fallbacks on a device if the encryption method for the best AP is not good
- (nm_device_update_best_ap): convert to new consolidated access point lists from
NetworkManagerInfo, and copy over latest NMI info to best_ap when setting it
* src/NetworkManagerWireless.c
- libgcrypt code wasn't converting the MD5 digest to an ascii string, fix it
* src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerSystem.h
- (nm_system_device_update_config_info): Add function to get device configuration
from system data in ifcfg-* files
* src/backends/NetworkManagerDebian.c
src/backends/NetworkManagerGentoo.c
src/backends/NetworkManagerSlackware.c
- Add stub functions for getting device configuration
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@131 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Remove 'debug' extern global from all files since we now
use syslog()
* src/NetworkManager.[ch]
- Break out routine that get the net.interface property from HAL,
removing that logic from nm_create_device_and_add_to_list()
- (nm_create_device_and_add_to_list): make this a bit more general so
it doesn't do the talking to HAL. Also add arguments to facilitate
the create of test devices.
- (nm_data_mark_state_changed): rename from nm_data_set_state_modified()
- (nm_data_new, main, nm_print_usage): add new argument "--enable-test-devices"
which makes NetworkManager listen for dbus commands to create test
devices, which have no backing hardware. Use when you're on a plane
for example, and/or forgot your wireless card at home. Test devices
_cannot_ be created unless NM is started with --enable-test-devices.
* src/NetworkManagerDbus.[ch]
- New "getLinkActive" method for devices
- New "setLinkActive" method for devices (only works on test devices)
- New "createTestDevice" method on NetworkManager object to create a test
device of a specified type (ie wired, wireless). UDI is created from
scratch, as is the interface name. Only works when NM is started with
--enable-test-devices switch.
- New "removeTestDevice" method on NetworkManager object which removes a
test device. Only works when NM is started with --enable-test-devices
* src/NetworkManagerDevice.[ch]
- Logic to facilitate test devices. Add variables to NMDevice struct to indicate
whether a device is a test device or not, and what its link status is.
- Deal with test devices in most functions. For those that work directly on hardware
special-case test devices.
- (nm_device_new): don't create a test device if test devices weren't enabled on the
command-line.
- (nm_device_update_link_active): split out logic for wired and wireless device link
checking to separate functions to facilitate test device link checking.
- (nm_device_set_enc_key): Since some drivers for wireless cards are daft and
don't make a distinction between System Authentication and Encryption
(namely Cisco aironet), we use Open System auth when setting a WEP key
on the card. We don't deal with Shared Key auth yet.
- (nm_device_activation_worker): split the activation cancel check logic out into
a separate routine nm_device_activation_cancel_if_needed()
- (nm_device_activation_signal_cancel): rename from nm_device_activation_cancel()
- (nm_device_fake_ap_list): Test wireless devices obviously cannot scan, so create
a list of fake access points that they can "see"
- (nm_device_is_test_device): return whether or not a device is a test device
* src/NetworkManagerPolicy.c
- (nm_policy_get_best_device): attempt to deal with wireless network selection,
previously if you "locked"/forced NM to use a wireless device but then
selected a wireless network for NM to use, it would switch to a wired device.
So, if the active device is wireless and it has a "forced" best AP, use it
if the "forced" best AP is still valid
- (nm_state_modification_monitor): deal with NULL best devices, for example
there were no usable network devices, or the last one was removed
* src/backends/NetworkManager*.c
- Deal with test devices, mostly just return success for operations like getting
a DHCP address
* test/nmtestdevices.c
- Test tool to create/remove/link-switch test devices
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@112 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessApplet.[ch]
- Rework menu code to add devices to menu, and to show
signal strength for each access point. Code cleanups
too.
* panel-applet/NMWirelessAppletDbus.c
- Grab network devices from NetworkManager too
- Grab quality information from NM for wireless networks
* src/NetworkManagerDbus.[ch]
- Add dbus methods for getting the HAL UDI from a device and
for getting its base quality, if its wireless
- Consolidate some functions (wireless network notifications,
device notifications)
- Add method for requesting NM to use a particular device
* src/NetworkManager.c
- Change for function consolidations from NetworkManagerDbus.c
- Implement active device locking and user-requested devices
(ie, tell NM to use a particular device instead of the one
it autochose)
* src/NetworkManagerDevice.c
- Add method for getting the base quality of a device, if its
wireless
- Grab device base quailty info from iwlib during scans
* src/NetworkManagerPolicy.c
- Use a user-requested device rather than the auto-chosen device
if we are told to
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@81 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerAP.[ch]
- Add a "enc_method_good" member and accessors to an Access Point
to signal when we've found the correct encryption method
for an access point
- Add a "timestamp" member and accessors, remove "priority" member
and accessors (use timestamps instead)
- Rename "wep_key"->"enc_key"
- (nm_ap_get_enc_key_hashed): new, return the correct mangled key
for a specified encryption method using the access points
source encryption key/passphrase
* src/NetworkManagerAPList.c
- When updating a network with dbus, grab timestamp now instead of
priority
* src/NetworkManagerDBus.[ch]
- Add signal for "DeviceActivating"
- Switch priority->timestamp
* src/NetworkManagerDevice.c
- Change references of "wep_key" -> "enc_key" or "key"
- Signal DeviceActivating when starting activation
- When activating a wireless device, if the access point we are connecting
to is encrypted, and we have a source key, try to generate a mangled
key and use that (ie, generate real WEP key from a passphrase)
- Rework device activation to fallback to other encryption methods if
a previous one didn't work (ie, try mangling a key as a 104-bit passphrase
first, then if that doesn't work fall back to direct hex key).
- (nm_device_update_best_ap): fix a deadlock, and use timestamps instead of
priority. We now prefer the latest access point used, rather than using
a priority scheme
- (nm_device_do_normal_scan): make the encryption method "unknown" on access
points we've just discovered, and merge in correct info from the global
access point lists
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@68 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/passphrase.glade
- Set window title to " "
* panel-applet/Makefile.am
panel-applet/keyring.png
- Deliver to correct place
* panel-applet/NMWirelessApplet.[ch]
- Add comments
- Remove applet->have_active_device as its no longer used
- (nmwa_load_theme): load keyring.png too
- (error_dialog): remove
- (show_warning_dialog): subsume functionality of error dialog too
- (nmwa_destroy, nmwa_new): create and dispose of an application-wide GConfClient
- (nmwa_handle_network_choice): add to deal with user clicking on an item from
the networks menu
- (nmwa_menu_item_activated): GtkMenuItem "activate" signal handler
- (nmwa_button_clicked, nmwa_setup_widgets): create and populate the menu on startup
and when we get broadcasts of changed wireless access points only, not when the
user clicks on the button to display the menu (too long of a wait)
- (nmwa_add_menu_item): Make active network bold, and place a keyring icon beside
networks that are encrypted
- (nmwa_dispose_menu, nmwa_menu_item_data_free): dispose of the data we place on each
menu item with g_object_set_data()
* panel-applet/NMWirelessAppletDbus.[ch]
- (nmwa_dbus_get_bool): add method to return boolean value from dbus message
- (nmwa_dbus_get_active_network): add (nmwa_dbus_get_string() wrapper to get active network)
- (nmwa_dbus_add_networks_to_menu): clean up, only show one instance of each ESSID in the menu
- (nmwa_dbus_set_network): force NetworkManager to use a particular network for wireless cards
- (nmwa_dbus_init, nmwa_dbus_filter): Trap network appear/disappear and device
activation/deactivation signals and rebuild the menu when they happen
* src/NetworkManager.c
- (main): use new nm_spawn_process() rather than system()
* src/NetworkManagerDbus.c
- (nm_dbus_devices_handle_request): don't compare AP structure addresses directly, but essids
instead. Since we can now force best_aps to stick around, the AP structure to which
dev->options.wireless.best_ap points to won't necessarily be in the device's device list
if a scan has happened since the best_ap was frozen. Also add "setNetwork" method
to freeze the best_ap.
* src/NetworkManagerDevice.[ch]
- (nm_device_activation_worker): Use new nm_spawn_process() call rather than system()
- (nm_device_*_best_ap): add freeze/unfreeze/get_frozen functions, and don't really update
the best_ap in nm_device_update_best_ap() if the best_ap is frozen AND in the device's
ap list
* src/NetworkManagerUtils.[ch]
- (nm_spawn_process): add replacement for system() usage
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@48 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfo.c:
- (main): clean up Seth's code style
* info-daemon/NetworkManagerInfoDbus.c:
- Use the more aptly-named path/service/interface constants from NetworkManager
- Don't return empty strings ("") as object paths ever, instead return errors
* panel-applet/NMWirelessApplet.c:
- Clean up Seth's code style
* src/NetworkManager.[ch]
- (nm_remove_device_from_list): remove anything having to do with pending_device
- (main, nm_print_usage): change --daemon=[yes|no] -> --no-daemon
* src/NetworkManagerAPList.[ch]
- Move Iter struct right above the iter functions to preserve opacity
- (nm_ap_list_remove_ap): implement
- (nm_ap_list_update_network): deal with errors returned from nm_dbus_get_network_priority(),
remove AP if NetworkManagerInfo doesn't know anything about it
- (nm_ap_list_diff): user NMAPList iterators
- (nm_ap_list_print_members): implement debugging function
* src/NetworkManagerDbus.[ch]
- (nm_dbus_nm_get_active_device): remove anything to do with pending_device
- (nm_dbus_get_user_key_for_network): remove DBusPendingCall stuff (unused),
and move the actual key setting stuff into NetworkManagerDevice.c
- (nm_dbus_get_network_priority): return -1 now on errors
- (nm_dbus_nmi_filter): fix strcmp() error that caused PreferredNetworkUpdate signals to
get lost, and force the active device to update its "best" ap when AP lists change
- (nm_dbus_nm_message_handler): Update conditions for returning "connecting" for a "status"
method call due to pending_device member removal
* src/NetworkManagerDevice.[ch]
- Move NMDevice structure to the top
- Add a wireless scan mutex and a best_ap mutex to the Wireless Options structure
- Remove Pending Action stuff from everywhere
- (nm_device_activation_*): We now "begin" activation and start a thread to do the
activation for us. This thread blocks until all conditions for activation have
been met (ie for wireless devices, we need a valid WEP key and a "best" ap), and
then setup up the interface and runs dhclient. We have to do this because there
is no guaruntee how long dhclient takes, and while we are blocking on it, we cannot
run our main loop and respond to dbus method calls or HAL device removals/inserts
- (nm_device_set_user_key_for_network): Move logic here from NetworkManagerDbus.c so we
can tell nm_device_activation_worker() that we've got a key
- (nm_device_*_best_ap): lock access to best_ap member of Wireless Options structure
- (nm_device_get_path_for_ap): dumb it down so the list doesn't lock against itself when
diffing (AP appear/disappear signal functions make sure the AP is actually in the device's
list)
- (nm_device_update_best_ap): move logic from nm_wireless_is_ap_better() here
* src/NetworkManagerPolicy.c
- Remove anything to do with pending_device
- Adjust device activation to deal with activation-in-worker-thread
* src/NetworkManagerUtils.c
- Clean up locking debugging a bit
* src/NetworkManagerWireless.[ch]
- (nm_wireless_is_ap_better): remove, stick logic in nm_device_update_best_ap(). This function
was badly named and is better as a device function
* panel-applet/.cvsignore: add
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@46 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* TODO
- new task: proper logging support
* info-daemon/NetworkManagerInfo.c
- Correct spelling of "canceled"
- Correct casting of objects for g_signal_connect()
* info-daemon/NetworkManagerInfoDbus.c
- Add defines for NetworkManager namespace and object path, and use them
- Add filter function to trap new signals from NetworkManager:
WirelessNetworkAppeared, WirelessNetworkDisappeared
* info-daemon/passphrase.glade
- Change name of "ok" button to "Login to Network..."
- Mark invisible
* src/NetworkManager.c
- Code and debug message cleanups
- Rename "nm_add_current_devices"->"nm_add_initial_devices"
- (nm_add_initial_devices) Check returned string array of devices
and don't try to add devices if array is NULL
- (main) Initialize libhal a bit later, make code a bit clearer
* src/NetworkManagerAP.[ch]
- New accessor and data member "matched": used to speed up AP list
diffing
- New accessor and data member "enc_method": will be used during key
fallback to cache which passphrase->key conversion actually works
so we don't have to do it every time
* src/NetworkManagerAPList.[ch]
- (nm_ap_list_find_ap_in_list) New: find an AP by essid in an AP list
- (nm_ap_list_diff) New: given two lists of access points, find the differences
between them, and send WirelessNetworkAppeared/Disappeared signals over
dbus in response to those differences
* src/NetworkManagerDbus.[ch]
- (nm_dbus_get_object_path_from_ap) New: given a device and an access point,
make an object path for that access point (NOTE that we don't yet check to
make sure that access point is actually in the device's AP list yet)
- (nm_dbus_get_ap_from_object_path) Renamed from nm_dbus_get_network_from_object_path
- (nm_dbus_signal_wireless_network_appeared, nm_dbus_signal_wireless_network_disappeared)
New: signal appearance/disappearance of wireless networks
- (nm_dbus_set_user_key_for_network) Mark the network/ap as invalid if the user cancelled
key entry
* src/NetworkManagerDevice.[ch]
- (nm_device_ap_list_clear) Use nm_ap_list_free rather than doing it ourselves
- (nm_device_ap_list_get) New: return the AP list (static function)
- (nm_device_do_normal_scan) Destroy old AP list later, so that we can diff the
new one resulting from the scan with the old one
* src/NetworkManagerWireless.c
- (nm_wireless_is_most_prefered_ap) "invalid" access points cannot be "best" access points
* test/nminfotest.c
- #define object paths and namespaces and use the #defines rather than static strings
- Test out user-key functionality of NetworkManagerInfo too
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@33 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManager.[ch]
src/NetworkManagerDbus.[ch]
src/NetworkManagerDevice.[ch]
src/NetworkManagerPolicy.c
src/NetworkManagerWireless.[ch]
- Add many more g_return_if_fail()/g_return_val_if_fail() checks
- Pass the NMData application data structure through all calls
that need it so we can get rid of nm_get_global_data()
- Change deallocation of the allowed_ap_list GSList in preparation
for not completely clearing it every time we get an update,
but instead getting incremental updates via GConf/dbus
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@20 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Makefile.am
- Add info-daemon directory
* configure.in
- Check for glade libs and headers
- Add info-daemon directory
* src/NetworkManagerAP.c
- nm_ap_new_from_ap(): Fix bug that resulted in an APs encryption status not getting
copied over to the new AP.
* src/NetworkManagerDbus.c
src/NetworkManagerDbus.h
- Deal with nm_device_ap_list_get_ap()->nm_device_ap_list_get_ap_by_index() change
- Remove nm_dbus_signal_need_key_for_network()
- Add disabled code for asynchronous user wep key callbacks
- Add functions for getting, setting, and cancelling user key operations
- Remove "setKeyForNetwork" device dbus method call, its on NetworkManager object instead
- Add "setKeyForNetwork" dbus method call on NetworkManager object
* src/NetworkManagerDevice.c
src/NetworkManagerDevice.h
- nm_device_update_link_active(): revert changes for wireless link detection, the WEP-key-is-wrong
logic is in device activation now
- nm_device_activate(): for wireless devices, if we can't associate with access point (perhaps
key is wrong) trigger get-user-key pending action
- Implement get-user-key pending action stuff, tie to dbus messages
- Rename nm_device_ap_list_get_ap() -> nm_device_ap_list_get_ap_by_index()
- Add nm_device_ap_list_get_ap_by_essid()
- Instead of copying "best" access points, ref them instead so that the key we set
sticks around
* src/NetworkManagerPolicy.c
- Deal with wrong WEP key, but right access point (and if so, return link_active = TRUE)
- Don't cancel pending actions on a device if its the same device as last iteration
- Only promote pending_device->active_device if activation was successfull
* src/Makefile.am
- Rename nmclienttest->nmtest
* info-daemon/Makefile.am
info-daemon/NetworkManagerInfo.c
info-daemon/NetworkManagerInfo.h
info-daemon/NetworkManagerInfoDbus.c
info-daemon/NetworkManagerInfoDbus.h
info-daemon/passphrase.glade
info-daemon/NetworkManagerInfo.conf
info-daemon/keyring.png
- Import sources for info-daemon, which pops up dialog for passphrase/key when
NetworkManager asks for it, and also will (soon) provide "allowed" access point
lists to NetworkManager by proxying user's GConf
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@16 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/Makefile.am
- Turn on warnings
* src/NetworkManager.c
- nm_create_device_and_add_to_list(): call nm_device_deactivate() rather
that doing the deactivation ourselves
- Cancel an pending actions on a device if its being removed
- Break up link state checking a bit, make non-active wireless cards
deactivated to save power
- Remove unused variables
* src/NetworkManager.h
- Add support for "pending" device
* src/NetworkManagerAP.h
src/NetworkManagerAP.c
- Add support for determining whether and AP has encryption enabled or not
- AP address is now "struct ether_addr" rather than a string
* src/NetworkManagerDbus.h
src/NetworkManagerDbus.c
- Add signal NeedKeyForNetwork, method SetKeyForNetwork (testing only)
- Changes for AP address from struct ether_addr->string
* src/NetworkManagerDevice.h
src/NetworkManagerDevice.c
- Remove unused variables, fix warnings
- Add support for Pending Actions (things that block a device from being "active"
until they are completed).
- First pending action: Get a WEP key from the user
- Add nm_device_is_wire[d|less](), rename nm_device_is_wireless()
- Clean up explicit testing of dev->iface_type to use nm_device_is_wireless()
- Update wireless link checking to try to determine if the AP we are associated
with is correct, but the WEP key we are using is just wrong. If its wrong,
trigger the GetUserKey pending action on the device
- If dhclient can't get an IP address, it brings the device down. Bring it back
up in that case, otherwise we can't scan or link-check on it
- Add IP address change notifications at appropriate points (still needs some work)
- Add nm_device_need_ap_switch(), checks whether we need to switch access points or not
* src/NetworkManagerPolicy.h
src/NetworkManagerPolicy.c
- Split out "best" access point determiniation into separate function
- Make device activation 2-stage: first the device is pending, then
in the next iteration through it becomes "active" unless it has
pending actions
* src/NetworkManagerUtils.h
src/NetworkManagerUtils.c
- Clean up unused variables and warnings
- Wrap our debug macros in {} to prevent possible confusion
* src/NetworkManagerWireless.c
- Forgot to return current best priority, which lead to last available AP always
being chosen no matter what its priority was. Corrected.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@15 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
