An rpm linter has complained with:
Missing epoch prefix on the version-release in 'Obsoletes: NetworkManager < 1.0.0' for NetworkManager-team
(cherry picked from commit 72b2485042)
If the device is being disconnected for a user request, at the moment
the active connection goes to state DEACTIVATED through the following
transitions, independently of the reason for the disconnection:
- state: DEACTIVATING, reason: UNKNOWN
- state: DEACTIVATED, reason: DEVICE_DISCONNECTED
For VPNs, a disconnection is always user-initiated, and the active
connection states emitted are:
- state: DEACTIVATING, reason: USER_DISCONNECTED
- state: DEACTIVATED, reason: USER_DISCONNECTED
This difference poses problems for clients that want to handle device
and VPNs in the same way, especially because WireGuard is implemented
as a device, but is logically a VPN.
Let NMActRequest translate the USER_REQUESTED device state reason to
USER_DISCONNECTED active connection state reason, in case of
disconnection.
This is an API change, but the previous behavior of reporting generic
uninformative reasons seems a bug. See for example
nmc_activation_get_effective_state(), which inspects the AC state
reason and in case it's generic (DEVICE_DISCONNECTED), it considers
the device state instead.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/issues/1405
(cherry picked from commit d3db0883c7)
NMActiveConnection implements method device_state_changed() that
re-emits device state changes as convenience for subclasses. Add the
reason for the state change to the handler, as it will be used in the
next commit.
(cherry picked from commit 634dd2f5e8)
Instruct the `NMDnsManager` to emit `CONFIG_CHANGED` signal even
`dns=none` or failed to modify `/etc/resolv.conf`.
The `NMPolicy` will only update hostname when DNS is managed.
Signed-off-by: Gris Ge <fge@redhat.com>
(cherry picked from commit a847ba8075)
An empty value NO_COLOR= should not be treated to disable colors.
This is also what [1] says (changed a while ago [2]).
[1] https://no-color.org/
[2] 99f90e27d0
(cherry picked from commit 0ac5221c40)
This commit removes the upper bound check for the PID, letting NetworkManager recognize a PID from the pidfile higher than 2^16.
The PID limit is often set higher than 2^16 (65536) on 64-bit systems, resulting in the pidfile being ignored and subsequently deleted if the currently running instance of NetworkManager has a pid higher than 2^16.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1727
(cherry picked from commit 28f7a6638f)
l3cfg emits a log for ACD conflicts. However, l3cfg is not aware of
what are the related NMDevice or the currently active connection, and
so it can't log the proper metadata fields (NM_DEVICE and
NM_CONNECTION) to the journal.
Instead, let NMDevice log about ACD collisions; in this way, it is
possible to get the message when filtering by device and connection.
For example:
$ journalctl -e NM_CONNECTION=d1df47be-721f-472d-a1bf-51815ac7ec3d + NM_DEVICE=veth0
<info> device (veth0): IP address 172.25.42.1 cannot be configured because it is already in use in the network by host 00:99:88:77:66:55
<info> device (veth0): state change: ip-config -> failed (reason 'ip-config-unavailable', sys-iface-state: 'managed')
<warn> device (veth0): Activation: failed for connection 'veth0+'
(cherry picked from commit 9143c1b542)
When a collision is detected by the Address Conflict Detection
mechanism, store the conflicting MAC address in NML3AcdAddrInfo, so
that it is available to listeners of NML3Cfg for events of type
NM_L3_CONFIG_NOTIFY_TYPE_ACD_EVENT.
(cherry picked from commit db307e69cb)
Show all valid properties for ip-tunnel.mode, not only 2 examples.
Show constants as values suitable for user input in nmcli. That means
showing, for example, "ipip (1)" instead of "IP_TUNNEL_MODE_IPIP (1)".
(cherry picked from commit 140abc81ec)
On very particular timing, if a connection is currently activating
on a modem device and user remove the remote settings associated
an device state change:
prepare -> deactivating (reason 'connection-removed', sys-iface-state: 'managed')
pops before entering into modem_prepare_result, resulting to a crash
on assertion.
We can simply check for the modem state to failed, set the success flag
to FALSE and continue.
Closes: https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/issues/1354
Signed-off-by: Frederic Martinsons <frederic.martinsons@unabiz.com>
(cherry picked from commit 2d85b11660)
The bottom border of the generated QR code had a different thickness
compared to other borders.
Improve it by using Upper Half Block so that all borders have similar
thickness.
(cherry picked from commit d9b06a95c9)
The condition in `_get_maybe_ipv6_disabled()` is improperly set which
returns the wrong value on if an device is disabled or not when
generating the assume connection. And when
`/proc/sys/net/ipv6/conf/$DEV/disable_ipv6` is not existed (not
disabling ipv6 through sysctl setting), IPv6 is disabled by default.
Fixes: be655e6ed1 ('core: read "disable_ipv6" sysctl before nm_ip6_config_create_setting()')
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1743
(cherry picked from commit ffc377ecc6)
The member is no longer used.
Fixes: 1feaf427d2 ('platform: rework handling of failed routes during nm_platform_ip_route_sync()')
(cherry picked from commit aed21d50af)
Replace "mesc" with "msec".
Fixes: 1feaf427d2 ('platform: rework handling of failed routes during nm_platform_ip_route_sync()')
(cherry picked from commit 3fb1c4dc23)
When rolling back a checkpoint, NM will crash due to dereference a NULL
pointer of `priv->removed_devices->len`.
To fix it, we just place a NULL check before that code block.
Fixes: 1f1b71ad9f ('checkpoint: preserve devices that were removed and
readded')
Reference: https://issues.redhat.com/browse/RHEL-1526
Signed-off-by: Gris Ge <fge@redhat.com>
(cherry picked from commit 3162507d6c)
The device authentication request is an async process, it can not know
the answer right away, it is not guarantee that device is still
exported on D-Bus when authentication finishes. Thus, do not return
SUCCESS and abort the authentication request when device is not alive.
https://bugzilla.redhat.com/show_bug.cgi?id=2210271
(cherry picked from commit b341161e2a)
When updating NetworkManager to a new version, normally the service is
not restarted by the installer to avoid interrupting networking.
However, next nmcli invocation will use the updated version, but against
the older version of the daemon that is still running. Although this is
suposed to work, it is advisable that nmcli and daemon's versions are
the same. Emit a warning recommending restarting the daemon.
Add nmcli test to check the new feature. To avoid breaking the existing
tests, test-networkmanager-service now reports the same version than the
running nmcli except if it's instructed to report a different one.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1703
(cherry picked from commit fb851f3294)
When a device belonging to a checkpoint is removed, we clear the
device pointer from the DeviceCheckpoint and move the object from the
devices list to the removed-devices list of the checkpoint.
Later, when restoring the connection we need to set again the device
pointer in DeviceCheckpoint; otherwise, any connection on that device
can't be reactivated if changed.
Fixes: 0e2f7ac7b5 ('nm-checkpoint: drop reference to NM_DEVICE objects on removal signal')
(cherry picked from commit b80a398306)
With flag DISCONNECT_NEW_DEVICES, on rollback we delete devices that
are present in the system and are not in the checkpoint.
The problem is that we remove the device from
`NMCheckpointPriv->devices` when it is deleted and so we lose the
information that the device was in the checkpoint. We need to also
look in the `removed_devices` list.
Fixes: 0e2f7ac7b5 ('nm-checkpoint: drop reference to NM_DEVICE objects on removal signal')
(cherry picked from commit 0fcfd6e24f)
