Add chains and rules to steer the IGMP reports to the primary member
port. This rules are adapted from the script provided by Eric Garver.
https://gitlab.com/egarver/virtual-networking/-/blob/master/mlag.sh
Fixes: e9268e3924 ('firewall: add mlag firewall utils for multi chassis link aggregation (MLAG) for bonding-slb')
(cherry picked from commit c691dd7ecf)
(cherry picked from commit b9a733d00b)
(cherry picked from commit 35d326324b)
(cherry picked from commit 94035d5473)
When a bond in balance-slb is created, the ports are enabled or disabled
based on carrier and link state. If the link/carrier goes down, the port
becomes disabled and we must make sure the MAC tables of the switches
are updated properly so the traffic is redirected.
In order to solve this, we send a GARP or RARP broadcast packet on the
bond. This fix cover 3 different balance-slb scenarios.
Scenario 1: The bond in balance-slb mode has IPv4 address configured and
some ports connected. Here the bond is acting like active-backup as the
packets will always have as source MAC the address of the bond
interface. When a port goes down, NetworkManager will send a GARP
broadcast announcing the address configured on the bond with the MAC
address configured on the port.
Scenario 2: The bond in balance-slb mode is connected to a bridge and has
some ports connected. The bridge has IPv4 configured. When a port goes
down, NetworkManager will send a GARP broadcast announcing the address
configured on the bridge with the MAC address configured on the port.
Scenario 3: The bond in balance-slb mode is connected to a bridge and
has some ports connected. The bridge does not have IP configuration and
therefore everything is L2. When a port goes down, NetworkManager will
query the FDB table and filter the entries by the ones belonging to the
bridge and the bond ifindexes. Then, it will send a RARP broadcast
announcing every learned MAC address from FDB.
Fixes: e9268e3924 ('firewall: add mlag firewall utils for multi chassis link aggregation (MLAG) for bonding-slb')
(cherry picked from commit 3f2f922dd9)
(cherry picked from commit e9e1768c37)
(cherry picked from commit 8f9b2f22bb)
(cherry picked from commit d5e832a3b5)
The function introduced queries the FDB table via netlink socket. It
accepts a list of ifindexes to filter out the FDB content not related to
it. It returns an array of MAC addresses.
To cltarify this function is unusually exposed directly on
nm-linux-platform.h as we don't want this be part of the whole
NMPlatform object or cache. This, is an exception to the rule to
simplify the integration of this functionality on NetworkManager.
In addition, it also doesn't use the async mechanism that is widely used
on netlink communication across nm-linux-platform. Again, the reason is
to simplify its use, as async communication won't provide a benefit to
the use cases we have planned for this, i.e balance-slb RARP announcing.
(cherry picked from commit 00f47efcb2)
(cherry picked from commit 8af7493627)
(cherry picked from commit ba3cff0ffd)
(cherry picked from commit 1fa281351c)
Add a hash generation helper for NMEtherAddr struct. This can be used
for HashTables containing pointers to NMEtherAddr structs.
(cherry picked from commit a63eec924c)
(cherry picked from commit 6371802087)
(cherry picked from commit 73aa5b47fa)
(cherry picked from commit 7003adb1ef)
This function would be useful when performing operations related to the
IPv4 addresses configured on the l3cfg. E.g this function will be used
for getting the IPv4 to announce on a GARP on bonding-slb when one of
the ports failover.
(cherry picked from commit 69f3493670)
(cherry picked from commit bfe2047acc)
(cherry picked from commit e24a6088c7)
(cherry picked from commit 931caf236c)
RFC 4191 section-3.1 says:
When processing a Router Advertisement, a type C host first updates a
::/0 route based on the Router Lifetime and Default Router Preference
in the Router Advertisement message header. [...] The Router Preference
and Lifetime values in a ::/0 Route Information Option override the
preference and lifetime values in the Router Advertisement header.
Fix the RA parsing so that the parameters from a default route option
are applied to the gateway.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/issues/1666https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/2072
Fixes: c3a4656a68 ('rdisc: libndp implementation')
(cherry picked from commit 6c18fda519)
(cherry picked from commit d775c3d256)
(cherry picked from commit 0f9d0cd6a3)
(cherry picked from commit 364e6e199c)
The tracking of variable "has_intern" in intern_config_read() is
wrong: we set it when adding any entry to the keyfile, but then we
remove the global DNS section without updating the variable.
The effect is that the function might return an empty keyfile instead
of NULL.
Fix this by moving the check on global DNS above.
Fixes: 55c204b9a3 ('core: add support for reading global DNS configuration from keyfile')
(cherry picked from commit 07113dde30)
(cherry picked from commit 0a1b642a2d)
(cherry picked from commit 23143c5e3e)
(cherry picked from commit f3006bf894)
When handling event TIMEOUT, "acd_data->probing_timeout_msec" needs to
be always initialized before jumping to "handle_start_probing:";
otherwise, an assertion failure is triggered at:
static void
_l3_acd_data_timeout_schedule_probing_restart(AcdData *acd_data, gint64 now_msec)
{
...
nm_assert(acd_data->probing_timeout_msec > 0);
Even if the ACD data is already in state PROBE, that doesn't mean that
the timeout is already initialized because the PROBE state can also be
reached from a INSTANCE_RESET event; and depending on the previous
state "acd_data->probing_timeout_msec" could be uninitialized.
Fixes-test: @iptunnel_restart
Fixes: b8f9d7b5dd ('l3cfg: rework ACD handling in NML3Cfg to support handling conflicts')
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/2023
(cherry picked from commit a09f9cc616)
(cherry picked from commit 4dde5aa787)
(cherry picked from commit 67b2a5f624)
(cherry picked from commit ac689ddd86)
Previously, the "edit" or "delete" buttons were clickable even
if there were no available connections, which was not expected
and caused an assertion to fail when clicked. This is because
the connections list could contain connections that were later
filtered out and not displayed in the final list, but the check
did not take this into account.
Make it so that the buttons are clickable only if we *actually*
have any available connections to edit or delete.
Fixes: 3bda3fb60c ('nmtui: initial import of nmtui')
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1991
(cherry picked from commit c9fefcd095)
(cherry picked from commit f6e4d1b2e0)
(cherry picked from commit de444a4562)
(cherry picked from commit 8d8eaca0d0)
When using the netdev datapath, we wait for the link to appear in
different steps:
1. initially, in act_stage3_ip_config() connects to platform's
"link-changed" signal to detect when the TUN interface appears;
2. when the interface appears, _netdev_tun_link_cb() schedules
_set_ip_ifindex_tun() in a idle handler;
3. _set_ip_ifindex_tun() checks if the link is ready (e.g. if the MAC
address is correct) and in that case it reschedules stage3, which
will move forward with the activation;
4. if the link is not ready in _set_ip_ifindex_tun(), the function
connects again to platform's "link-changed" signal to react to link
changes;
5. after the link changes and it is ready, _netdev_tun_link_cb()
reschedules stage3, which moves forward with the activation;
With the current implementation it is possible that after step 2, if
act_stage3_ip_config() runs because it was already scheduled, it
registers again to the "link-changed" event; then when
_set_ip_ifindex_tun() is invoked it will hit assertion:
nm_assert(!priv->wait_link.tun_link_signal_id);
Fix this by preventing that the signal gets registered again after
step 2.
Fixes-test: @ovs_datapath_type_netdev_with_cloned_mac
Fixes: acf485196c ('ovs-interface: wait that the cloned MAC changes instead of setting it')
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/2024
(cherry picked from commit b6e69f3467)
(cherry picked from commit 50da988182)
(cherry picked from commit d82d8a027c)
(cherry picked from commit 317b9a3a9c)
In case the user selects a setting/property with "goto" command, and
then attempts to tab-complete a setting/property pair, the original sett
and prop strings are overriden without freeing:
nmcli > goto 802-1x.pac-file
nmcli 802-1x.pac-file> set 802-1.lal<TAB>
Fixes: 79bc271685 ('cli: TAB-completion for enum-style property values (rh #1034126)')
(cherry picked from commit ca47fd882e)
(cherry picked from commit 796844dc09)
(cherry picked from commit d13f0c04ed)
Fixes: 797d9c4403 ('python: make dbus, gi examples, and debug-helper.py python3 ready')
(cherry picked from commit 75350b3e76)
(cherry picked from commit 87ec6ae44e)
(cherry picked from commit 005b042b41)
If we add multiple default routes with the same metric and different
preferences, kernel merges them into a single ECMP route, with overall
preference equal to the preference of the first route
added. Therefore, the preference of individual routes is not
respected.
To avoid that, add routes with different metrics if they have
different preferences, so that they are not merged together.
We could configure only the route(s) with highest preference ignoring
the others, and the effect would be the same. However, it is better to
add all routes so that users can easily see from "ip route" that there
are multiple routers available.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/issues/1468https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1983
Fixes: 032b4e4371 ('core: use router preference for IPv6 routes')
(cherry picked from commit c437625a76)
(cherry picked from commit 8445076d55)
(cherry picked from commit 06032aa758)
We are currently asserting that the list of devices waiting for
auto-activation in NMPolicy is not empty. This condition is always
false because:
- NMDevice holds a reference to NMManager
- NMManager holds a reference to NMPolicy
- on dispose, NMDevice asserts that it's not in NMPolicy's
auto-activate list
Therefore if there is any NMDevice alive, NMPolicy must be alive as
well. Instead, if there is no NMDevice alive the list must be empty.
The assertion could fail only when the NMPolicy instance gets
disposed, which usually doesn't happen because it's still referenced
at shutdown.
Fixes: aede228974 ('core: assert that devices are not registered when disposing NMPolicy')
(cherry picked from commit 27b646cfa1)
(cherry picked from commit 1b51404703)
(cherry picked from commit e4d7cb7453)
Currently, when the agent manager is sent a registration request
containing UTF-8 characters, it will form an invalid error message
using only one of the bytes from the UTF-8 sequence, which causes
an assertion in glib to fail, which replaces the returned error message
with "[Invalid UTF-8]". It will also print an assertion failure to the
console, or crash NetworkManager on non-release builds.
This commit makes it so that it instead prints out the character in
hexadecimal form if it isn't normally printable, so that it is once
again a valid UTF-8 string.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1965
Fixes: a30cf19858 ('agent: add agent manager and minimal agent class')
(cherry picked from commit c9327b2e8b)
(cherry picked from commit f6f466ccf8)
(cherry picked from commit 19a8feaad6)
It might happen that write() returns -1, but the errno is not EINTR.
In that case, the length would be incremented by 1, and the data pointer
to the data being written would be moved back by 1 byte on every error.
Make it so that the function exits with an error if it indicates an error.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1971
Fixes: 3bda3fb60c ('nmtui: initial import of nmtui')
(cherry picked from commit 13317bd536)
(cherry picked from commit f1888900bd)
(cherry picked from commit 277863ef8f)
Calling c_list_link_tail() on a list entry that already belongs to
another list corrupts the other list, in this case 'old_lst_head';
this is explained in the documentation of c_list_link_before():
* @what is not inspected prior to being linked. Hence, it better not
* be linked into another list, or the other list will be corrupted.
This can be reproduced by invoking "nmcli device wifi rescan ssid x"
multiple times; in this way, _scan_request_ssids_track() reuses the
previous SSID data, the list gets corrupted and this causes a crash.
Fixes: 7500e90b53 ('wifi: rework scanning of Wi-Fi device')
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/2076
(cherry picked from commit 3b75577871)
(cherry picked from commit 3917235a2d)
(cherry picked from commit 409acc6185)
(cherry picked from commit 1006b39ef1)
The OVS interface can be matched via MAC address; in that case, the
"connection.interface-name" property of the connection is empty.
When populating the ovsdb, we need to pass the actual interface name
from the device, not the one from the connection.
Fixes: 830a5a14cb ('device: add support for OpenVSwitch devices')
https://issues.redhat.com/browse/RHEL-34617
(cherry picked from commit be28a11735)
(cherry picked from commit 129f9e5be6)
(cherry picked from commit ecb26f5ad9)
The comparison checking for MAC address equality had previously been flipped around.
Fixes: b084ad7f2b ('libnm-core: canonicalize hardware addresses in settings')
(cherry picked from commit a9c4c1d84e)
(cherry picked from commit 581e0b0f2a)
ci-templates only supported alpine:latest, but support for any other
version has been introduced. Use it so our Alpine pipelines stop
failing.
(cherry picked from commit 9354fabaa8)
(cherry picked from commit 2035048449)
(cherry picked from commit fe5a09b1ad)
(cherry picked from commit 3d80f73b3c)
That way we will be able to check the logs in the case of failure.
(cherry picked from commit 0d4c8a235a)
(cherry picked from commit b6e2533f82)
(cherry picked from commit fc238062bd)
(cherry picked from commit e8532d4a41)
The regex for "Fixes" also matches with "Ignore-Fixes", so the commit is
added twice and then removed only once by the "Ignore-Fixes". It still
remains once in the list of commits to backport, making that
"Ignore-Fixes" does not work. Fix it.
(cherry picked from commit 0074fc4647)
(cherry picked from commit d02e722ece)
Now we are using scheduled pipelines for various purposes like
regenerating the container images and triage the issues and MRs. That
means that the last pipeline ran for main might not be the pipeline with
the jobs building and testing the code.
Use `source=push` to retrieve only pipelines that are not scheduled.
(cherry picked from commit c5e51bd5d8)
(cherry picked from commit 2355aca958)
The help text is read from the comments at the top of the script itself.
However, to detect what lines belongs to the help text, a range was
defined as:
- Start: any line starting with `# `
- End: any line starting `# Run with --no-test`
If any later line starts with `# ` is considered as a new matching
range, and from it to the end of the file is printed too.
Fix it by defining the range:
- Start: line 2
- End: blank line
(cherry picked from commit b1c8b5482c)
(cherry picked from commit 02698911fa)
GNOME has changed the process to publish releases to download.gnome.org.
Now, it is required to do it from the CI of projects hosted in GNOME's
repositories.
As we don't have the project hosted there, we have 2 options:
- Create a mirror and set up the CI so we continue using
download.gnome.org.
- Stop publishing the tarballs there and do it in gitlab.freedesktop.org
from now on.
After a brief discussion we have decided that the second makes more
sense, so adapt release.sh to do that.
https://discourse.gnome.org/t/gnome-release-service-ftpadmin-replacement-coming-11th-december/25487https://handbook.gnome.org/maintainers/making-a-release.html
(cherry picked from commit 29708731fe)
(cherry picked from commit 68e6318f66)
(cherry picked from commit afbe8dd98b)
NetworkManager current code will refuse to activate a connection if its
interface has no SRIOV capacity but holding a empty SRIOV settings.
This patch only valid SRIOV capacity when it is enabled(total_vfs > 0).
Resolves: https://issues.redhat.com/browse/RHEL-58397
Signed-off-by: Gris Ge <fge@redhat.com>
(cherry picked from commit 421ccf8b4c)
(cherry picked from commit c9e31e70cb)
(cherry picked from commit 90a3b01468)
(cherry picked from commit 296fc53ea8)
When the attach_port()/detach_port() methods do not return immediately
(currently, only for OVS ports), the following situation can arise:
- nm_device_controller_attach_port() starts the attachment by sending
the command to ovsdb. Note that here we don't set
`PortInfo->port_is_attached` to TRUE yet; that happens only after
the asynchronous command returns;
- the activation of the port gets interrupted because the connection
is deleted;
- the port device enters the deactivating state, triggering function
port_state_changed()
- the function calls nm_device_controller_release_port() which checks
whether the port is already attached; since
`PortInfo->port_is_attached` is not set yet, it assumes the port
doesn't need to be detached;
- in the meantime, the ovsdb operation succeeds. As a consequence,
the kernel link is created even if the connection no longer exists.
Fix this by turning `port_is_attached` into a tri-state variable that
also tracks when the port is attaching. When it is, we need to perform
an explicit detach during deactivation.
Fixes: 9fcbc6b37d ('device: make attach_port() asynchronous')
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/2043
Resolves: https://issues.redhat.com/browse/RHEL-58026
(cherry picked from commit a8329587c8)
(cherry picked from commit d809ca6db2)
(cherry picked from commit ca6ca684b2)
(cherry picked from commit 83c32e9f17)
GCC 14 complans with:
src/libnm-glib-aux/nm-uuid.c: In function 'nm_uuid_generate_from_strings_strv':
src/libnm-glib-aux/nm-uuid.c:492:12: error: '_1' may be used uninitialized [-Werror=maybe-uninitialized]
492 | return nm_uuid_generate_from_string_str(s, slen, uuid_type, type_args);
| ^
src/libnm-glib-aux/nm-uuid.c:392:1: note: by argument 1 of type 'const char *' to 'nm_uuid_generate_from_string_str' declared here
392 | nm_uuid_generate_from_string_str(const char *s,
| ^
"-Wmaybe-uninitialized" diagnoses passing pointers or references to
uninitialized memory to functions taking const-qualified arguments.
In this case, nm_uuid_generate_from_string_str()'s first argument is a
"const char *" and so the compiler expects that the string is always
initialized. However, it is not initialized when len is zero.
A non-null zero-length array can be specified in two ways: by setting
len to zero, or by setting len to -1 and having NULL as first
element. Handle both cases in the same way.
(cherry picked from commit 2386c0f52d)
(cherry picked from commit cbf20a2317)
GKeyfile changed something about how to handle invalid escape sequences.
As we don't want to test GKeyfile (per-se), just adjust to test to not
hit the problem.
This would fail with glib2-2.79.1-1.fc40:
# ./tools/run-nm-test.sh -m src/core/tests/config/test-config -p /config/set-values
TAP version 13
# random seed: R02Sb8afff1ec38ca5a1b7713e8c40eb4f56
# Start of config tests
# GLib-GIO-DEBUG: _g_io_module_get_default: Found default implementation local (GLocalVfs) for ?gio-vfs?
# (src/core/tests/config/test-config.c:1107) invalid value in config-data .intern.with-whitespace.key2 = (null) (instead of " b c\, d ")
./tools/run-nm-test.sh: line 307: 245847 Trace/breakpoint trap (core dumped) "${NMTST_DBUS_RUN_SESSION[@]}" "$TEST" "${TEST_ARGV[@]}"
exec "src/core/tests/config/test-config" failed with exit code 133
(cherry picked from commit 7f2a32fa11)
(cherry picked from commit 1803520a7a)
Disable the vlan_xgress unit test which was failing.
This test is currently being work and is going to be fixed soon.
(cherry picked from commit 6e30e37ebe)
Otherwise, gcc-14.0.1-0.2.fc40 warns:
../src/libnm-core-impl/nm-utils.c: In function _nm_utils_strstrdictkey_create:
../src/libnm-core-impl/nm-utils.c:5076:16: error: allocation of insufficient size '1' for type 'NMUtilsStrStrDictKey' {aka 'struct _NMUtilsStrStrDictKey'} with size '2' [-Werror=alloc-size]
5076 | return g_malloc0(1);
| ^~~~~~~~~~~~
(cherry picked from commit 63ab0d926d)
(cherry picked from commit 157c2ffeee)
With a static array, we indicate that the argument must not be NULL.
Gcc-14.0.1-0.2.fc40 now warns against that:
CC src/libnm-base/libnm_base_la-nm-base.lo
In file included from ../src/libnm-std-aux/nm-default-std.h:102,
from ../src/libnm-glib-aux/nm-default-glib.h:11,
from ../src/libnm-glib-aux/nm-default-glib-i18n-lib.h:13,
from ../src/libnm-base/nm-base.c:3:
../src/libnm-base/nm-base.c: In function 'nm_net_devname_infiniband':
../src/libnm-std-aux/nm-std-aux.h:191:12: error: 'nonnull' argument 'name' compared to NULL [-Werror=nonnull-compare]
191 | if (expr) \
| ^
../src/libnm-std-aux/nm-std-aux.h:202:27: note: in expansion of macro '_NM_BOOLEAN_EXPR_IMPL'
202 | _NM_BOOLEAN_EXPR_IMPL(NM_UNIQ, expr))
| ^~~~~~~~~~~~~~~~~~~~~
../src/libnm-glib-aux/nm-macros-internal.h:1693:31: note: in expansion of macro 'NM_BOOLEAN_EXPR'
1693 | #define _G_BOOLEAN_EXPR(expr) NM_BOOLEAN_EXPR(expr)
| ^~~~~~~~~~~~~~~
/usr/include/glib-2.0/glib/gmacros.h:1244:43: note: in expansion of macro '_G_BOOLEAN_EXPR'
1244 | #define G_LIKELY(expr) (__builtin_expect (_G_BOOLEAN_EXPR(expr), 1))
| ^~~~~~~~~~~~~~~
/usr/include/glib-2.0/glib/gmessages.h:656:9: note: in expansion of macro 'G_LIKELY'
656 | if (G_LIKELY (expr)) \
| ^~~~~~~~
../src/libnm-base/nm-base.c:57:5: note: in expansion of macro 'g_return_val_if_fail'
57 | g_return_val_if_fail(name, NULL);
| ^~~~~~~~~~~~~~~~~~~~
../src/libnm-core-impl/nm-setting-wireguard.c: In function '_nm_wireguard_peer_set_public_key_bin':
../src/libnm-core-impl/nm-setting-wireguard.c:316:8: error: 'nonnull' argument 'public_key' compared to NULL [-Werror=nonnull-compare]
316 | if (!public_key)
| ^
Convert these checks to an nm_assert() to suppress the warning.
(cherry picked from commit 7a031eef5d)
(cherry picked from commit aeaba8a2a1)
Upstream systemd fixed this compiler warning. What really needs to be
done, is re-importing the upstream code.
In the meantime, suppress the warning that hits on GCC 14.
This is a temporary workaround!
See-also: fdd84270df
(cherry picked from commit b1016e3be8)
(cherry picked from commit df879e6950)
systemd uses that too. We cannot enable compiler warnings that
upstream doesn't want to support.
See-also: b59bce308d
(cherry picked from commit ad22a96da9)
(cherry picked from commit 4c66cce980)
Currently if the system hostname can't be determined, NetworkManager
only retries when something changes: a new address is added, the DHCP
lease changes, etc.
However, it might happen that the current failure in looking up the
hostname is caused by an external factor, like a temporary outage of
the DNS server.
Add a mechanism to retry the resolution with an increasing timeout.
https://issues.redhat.com/browse/RHEL-17972
(cherry picked from commit 04ad4c86d0)
(cherry picked from commit 3555dbd2f2)
(cherry picked from commit 7ae0f3edf0)
GCC 14 with LTO complains with:
In function 'nm_team_link_watcher_new_ethtool',
inlined from 'nm_team_link_watcher_new_ethtool' at src/libnm-core-impl/nm-setting-team.c:106:1:
src/libnm-core-impl/nm-setting-team.c:130:33: error: array subscript 'struct NMTeamLinkWatcher[0]' is partly outside array bounds of 'unsigned char[16]' [-Werror=array-bounds=]
130 | watcher->ref_count = 1;
| ^
src/libnm-core-impl/nm-setting-team.c:128:15: note: object of size 16 allocated by 'g_malloc'
128 | watcher = g_malloc(nm_offsetofend(NMTeamLinkWatcher, ethtool));
| ^
even if the warning is disabled via pragma directives in that
code. This looks like the following GCC bug:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=80922
saying
We do not track warning options (and thus optimize pragmas /
attributes) across LTO because they are not saved in the function
specific optimization flag section.
We use a (NMTeamLinkWatcher *) to point to a memory area that is
shorter than the struct, because depending on the watcher type we need
to store different parameters; in this way we can save few bytes of
memory for some watcher types. However, this often breaks when
upgrading the compiler; instead just allocate the full struct.
(cherry picked from commit d369f55192)
(cherry picked from commit efa1d0e173)
gcc-14.0.1-0.2.fc40 warns:
CC src/libnm-core-impl/libnm_core_impl_la-nm-setting-team.lo
../src/libnm-core-impl/nm-setting-team.c: In function nm_team_link_watcher_new_ethtool:
../src/libnm-core-impl/nm-setting-team.c:127:13: error: allocation of insufficient size 16 for type NMTeamLinkWatcher with size 48 [-Werror=alloc-size]
127 | watcher = g_malloc(nm_offsetofend(NMTeamLinkWatcher, ethtool));
| ^
(cherry picked from commit 5715feebe7)
(cherry picked from commit eaa3a4e396)
They were backported from 229bebfae9 ('nm-daemon-helper: add "service"
argument') but they are not needed in this branch because they were only
used by c42f6f0997 ('daemon-helper: use _nm_strerror_r() to avoid
non-thread-safe strerror()') which is not backported.
As they are unused they trigger a warning, remove them.
