* introspection/nm-ip4-config.xml: Implement.
* libnm-glib/libnm-glib-test.c: Use new DBUS API in tests.
* libnm-glib/nm-ip4-config.c:
* libnm-glib/nm-ip4-config.c: Implement.
* src/nm-ap-security[-*]: Remove circular dependencies between APs and AP
securities. APs reference security.
* src/nm-device-802-11-wireless.c: Implement missing properties that need to
be exported over DBUS.
* src/nm-device-802-3-ethernet.c: Ditto.
* src/NetworkManagerAP.c:
* src/NetworkManagerAP.h:
- Convert to GObject, export over DBUS.
* src/nm-ip4-config.h:
* src/nm-ip4-config.h:
- Convert to GObject, export over DBUS.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2322 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Totally break NetworkManager. Please use 0.6 branch until futher notice.
* src/:
- Remove old low-level dbus interface implementations and replace them
with dbus-glib one.
* configure.in:
- Require dbus-glib >= 0.72.
- Plug in new sources to build.
* libnm-glib/:
- Implement GObject wrappers on top of DBUS glib auto-generated bindings
to make it more convenient to use from GObject based programs.
* introspection/:
- Implement DBUS XML introspection files, used by both NM and libnm-glib.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2309 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device-802-11-wireless.c:
- Add "network-added" and "network-removed" signals.
- Use gobject boilerplate macros to define the GObject.
- Implement wireless device activation.
- Remove activation_failure_handler and activation_success_handler
and instead listen on state-changed signals and run the same code
from there.
* src/nm-device.c:
- Implment NMDeviceInterface::deactivate.
- Remove activation_failure_handler and activation_success_handler
virtual methods. Each device which is interested in these events
can just listen on it's state changed signals.
* src/NetworkManagerPolicy.c:
- Move a bit more NMData usage to NMManager.
- Remove activation scheduling bits.
- Add listeners for wireless device's "network-added" and
"network-removed" signals.
- Listen device changed signals and deactivate currently activated
device when another device start activating (for now).
- Remove (nm_policy_schedule_device_change_check): There's never a need
for calling this, the policy code knows exactly when this should happen,
by listening on events from NMManager and NMDevices.
* src/nm-device-802-3-ethernet.c (nm_device_802_3_ethernet_activate):
Implement.
* src/nm-dbus-nm.c (nm_dbus_nm_set_active_device): Call the activation
method on the specific device instead of going to through policy code
and determining the device type by passed in AP's existance.
* src/nm-device-interface.c (nm_device_interface_deactivate): Implement the
abstract NMDevice deactivation.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2298 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManager.c:
- Set up all the shiny new managers.
* src/NetworkManagerPolicy.c:
- Add the beginnings of new NMPolicy code. Instead of requireing all
classes to call into policy code, make the policy code kind of like
a supervisor that monitors what's going on and drives the whole NM.
* src/nm-hal-manager.c:
* src/nm-hal-manager.h:
- Collect all libhal code scattered around NM to this one class.
- Listen libhal and NMManager events and add/remove devices to
NMManager.
* src/nm-manager.c:
* src/nm-manager.h:
- Implment a replacement for NMData. NMData is now officially
deprecated.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2291 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Make NMDevice abstract class, remove almost all references to it's
subclasses (the last place gets removed with new policy manager). Add
NMDeviceInterface (which NMDevice implements) so that when we have
NMDevice exported over DBUS, there's a common NMDevice interface which
all instances have, plus there's a device specific interface for each
specific type.
Remove functions (nm_device_is_802_3_ethernet) and
(nm_device_is_802_11_wireless). There are already standard GObject macros
for type safe checks.
Use the updated supplican manager API.
* src/nm-device-interface.h:
* src/nm-device-interface.c:
* src/nm-call-store.h:
* src/nm-call-store.c: Implement.
* src/supplicant-manager/nm-supplicant-interface.c:
* src/supplicant-manager/nm-supplicant-interface.h:
* src/supplicant-manager/nm-supplicant-manager.c:
* src/supplicant-manager/nm-supplicant-manager.h:
- Remove all private data type references from public header files.
- Remove all references to other NM classes, this class is just a
proxy between wpa_supplicant and NM so it doesn't have to know
any internals.
- Convert to dbus-glib bindings.
- Type safe checks for public methods' arguments.
- Store pending DBUS call ids to NMCallStore.
* src/supplicant-manager/nm-supplicant-config.c:
- Store config values in a GHashTable instead of GSList.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2285 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Threading removal related cleanups:
- Use the glib default main context. Remove the device main context
member from NMDevice, and the main_context member from NMData. Change
all the idle and timeout scheduler functions to use plain
g_idle_add() and g_timeout_add().
- As a side-effect of the first change, nm_dbus_manager_get() no longer
takes an argument; fix that up too.
- Remove all locking, which is useless since we no longer use threads. For
example, nm_get_device_by_iface_locked() has been removed. The global
device list lock, the AP List lock, and all static locks in
NetworkManagerPolicy.c have been removed. The locking utility functions
in NetworkManagerUtils.c have also been removed.
- Other cleanups in spacing and code style
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2205 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Use a single thread for everything. With the move to wpa_supplicant
and communication over D-Bus, there's no reason for multiple threads.
Almost all of the blocking code has been removed, with one exception in
the DHCP manager and a few in the VPN manager. This commit removes the
per-device worker thread and fixes activation cancellation in the absence
of threads. Further removal of thread-related code would be removing
any locking code (like the device list lock) and simplification of logic
around areas of code or data structures that are currently locked.
* autoip.c
dhcp-manager/nm-dhcp-manager.c
nm-device-802-11-wireless.c
nm-device-802-3-ethernet.c
nm-device.c
nm-device.h
- Remove usage of multiple threads
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2197 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/supplicant-manager/nm-supplicant-types.h
- new file; move all supplicant manager object typedefs here for
#include sanity
* src/supplicant-manager/nm-supplicant-interface.c
src/supplicant-manager/nm-supplicant-interface.h
- new file; an object that interfaces an NMDevice object to the
supplicant and handles signals from the supplicant. This object
does all necessary DBus communication with wpa_supplicant.
* src/supplicant-manager/nm-supplicant-manager.c
src/supplicant-manager/nm-supplicant-manager.h
- Actually do something. Track the state of the wpa_supplicant service
and deal with its comings & goings. Handle life events of
supplicant interfaces too.
- Move NMSupplicantManager typedef to nm-supplicant-types.h
* src/supplicant-manager/nm-supplicant-connection.h
- Move NMSupplicantConnection typedef to nm-supplicant-types.h
* src/supplicant-manager/Makefile.am
- Add new files to build, and add libnm-util to includes
* src/nm-marshal.list
- New marshaler type: VOID:UINT,UINT
* src/nm-device-802-3-ethernet.c
- (real_init): grab a supplicant interface
- (nm_device_802_3_ethernet_dispose): release the supplicant interface
- (supplicant_iface_state_cb): new function, stub for handling
supplicant interface state changes
* src/nm-device-802-11-wireless.c
- (real_init): grab a supplicant interface
- (nm_device_802_11_wireless_dispose): release the supplicant interface
- (supplicant_iface_state_cb): new function, stub for handling
supplicant interface state changes
* src/NetworkManager.c
- (main): create and keep the supplicant manager around for the lifetime
of NetworkManager
* src/Makefile.am
- Link to the supplicant manager sub-library and use the supplicant
manager includes
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2125 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device.h: Introduce nm_ioctl_info(), which defines to
nm_info() if IOCTL_DEBUG is set and a no-op if not. We can use this
instead of dumping ifdef's throughout the code.
* src/NetworkManagerSystem.c, src/nm-device-802-11-wireless.c,
src/nm-device-802-3-ethernet.c, src/nm-device.c: Remove ifdef's and
use nm_ioctl_info() in lieu.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1768 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Process netlink messages in device subclasses rather than in
NetworkManager.c. Also add support for recognizing Wireless Events.
* configure.in
- Find GLIB_GENMARSHAL
* src/Makefile.am
- Since we're marshalling custom types for wireless event signals,
we get to create our own marshallers using GLIB_GENMARSHAL
* src/NetworkManager.c
- (nm_monitor_wired_link_state): renamed to nm_monitor_setup
- (nm_monitor_setup): renamed from nm_monitor_wired_link_state, and
cut down somewhat. We no longer process signals here.
- (nm_data_new): create the netlink monitor here, and remove a
useless call to nm_policy_schedule_device_change_check()
- (nm_data_free): get rid of the netlink monitor here
- (nm_device_link_activated, nm_device_link_deactivated): removed
- (main): don't create the netlink monitor here, let nm_data_new
do that. Call nm_policy_schedule_device_change_check() right
before we jump to the mainloop to figure out which device
to use first
* src/NetworkManagerSystem.[ch]
- (nm_system_get_rtnl_index_from_iface, nm_system_get_iface_from_rtnl_index):
convert back and forth from interface names to interface
indexes
* src/nm-device-802-11-wireless.c
- (real_init): connect to wireless-event signals from the netlink
monitor object
- (nm_device_802_11_wireless_event): new function, schedule handler
for wireless event signals from the netlink monitor object. We
want the handler to run in the device's context
- (wireless_event_helper): handle wireless-event signals from netlink
- (nm_device_802_11_wireless_dispose): disconnect wireless-event
signal handler
* src/nm-device-802-11-wireless.h
- remove unused prototype for nm_device_802_11_wireless_new
* src/nm-device-802-3-ethernet.c
- (real_init): new function; set up signal handlers for link events
- (nm_device_802_3_ethernet_link_activated): new function, schedule
handler for netlink link activated events on device's main loop
- (link_activated_helper): when we get a link activated event, set
the device's link to be active
- (nm_device_802_3_ethernet_link_deactivated): new function; schedule
handler for netlink link deactivated events on device's main loop
- (link_deactivated_helper): when we get a link deactivated event, set
the device's link to be inactive
- (nm_device_802_3_ethernet_dispose): disconnect signal handler on
dispose
* src/nm-device-802-3-ethernet.h
- remove unused prototype for nm_device_802_3_ethernet_new
* src/nm-device.[ch]
- (nm_get_device_by_iface_locked): variant of nm_get_device_by_iface
but locks the device list
- (nm_device_set_active_link): a little bit of cleanup and de-indenting
* src/nm-netlink-monitor.[ch]
- (nm_netlink_monitor_class_install_signals): New signal
"wireless-event"
- (nm_netlink_monitor_new): keep reference to NMData so we can get
at the device list
- (nm_netlink_monitor_event_handler): expand for wireless events too
* src/nm-marshal-main.c
- Include generated nm-marshal.c and nm-marshal.h
* src/nm-marshal.list
- List of custom marshal functions
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1555 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Clean up activation cancellation. Should be a lot faster now. Observed
an issue with wireless devices between stage 2 and 3 of activation, where
activation would be cancelled, but the device thread wouldn't notice until
the supplicant association timed out. Reorganize activation such that
a cancellation handler gets immediately scheduled in the device's thread,
and devices have a chance to perform any custom cleanup too.
* src/nm-device.[ch]
- (activation_cancel_handler): new device-type-specific function
for cleaning up device-type-specific stuff on cancellation
- (cancel_activation): removed
- (nm_device_activation_cancel): subsume functionality of
real_cancel_activation, but instead of doing anything, punt
operation to a handler that's run in device-thread context
- (nm_device_schedule_activation_handle_cancel): fix spelling of
a warning message
- (activation_handle_cancel_helper): cancellation handler run in
device-thread context, calls device-type-specific cancelation,
then tears down the activation request
- (real_activation_cancel_handler): generic cancellation handler,
deals with cancelling any in-process DHCP request
- (nm_device_activate_stage1_device_prepare,
nm_device_activate_stage2_device_config,
nm_device_activate_stage3_ip_config_start,
nm_device_activate_stage4_ip_config_get,
nm_device_activate_stage4_ip_config_timeout,
nm_device_activate_stage5_ip_commit): don't call
nm_device_schedule_activation_handle_cancel() any more, since
cancellation will have been already scheduled for us by
nm_device_activation_cancel(). Just exit the function and
assume that the cancel handler will be called next.
* src/nm-device-802-3-ethernet.c
- (real_act_stage2_config): remove; didn't do anything anyway
* src/nm-device-802-11-wireless.c
- (supplicant_status_cb): ensure we don't do anything if the activation
got cancelled
- (real_activation_cancel_handler): implement; cancel user key request
on activation cancellation
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1549 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Add support for retrieving both the per-device speed and the
per-network maximum supported rate. Then change the getProperties
DBUS API for both networks and devices to report this informaiton.
Finally, display the information via both nm-applet and nm-tool:
* gnome/applet/applet-dbus-devices.c: Grab the speed from getProperties
and set it.
* gnome/applet/applet.c: Display the device's speed in the 'Connection
Information' dialog.
* gnome/applet/applet.glade: Update the UI to show per-device speed.
* gnome/applet/nm-device.c, gnome/applet/nm-device.h: Add interfaces
network_device_get_speed() and network_device_set_speed() for
retrieving and setting, respectively, a network device's current
speed.
* src/nm-dbus-device.c: Send the device's speed on getProperties.
* src/nm-device-802-11-wireless.c: Return the rate in Mb/s, not Kb/s,
in the function nm_device_802_11_wireless_get_bitrate() -- it does
not matter (yet) what the units are, because we only feed it its own
output. Implement SIOCGIRATE and set the per-network maximum
supported rate during scanning.
* src/nm-device-802-11-wireless.h: Export the function
nm_device_802_11_wireless_get_bitrate().
* src/nm-device-802-3-ethernet.c, src/nm-device-802-3-ethernet.h: Add
function nm_device_802_3_ethernet_get_speed() for returning an
802.3's current speed, in Mb/s.
* test/nm-tool.c: Display the per-device current speed, if available,
and the per-network maximum rate.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1540 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/Makefile.am, src/kernel-types.h: Now that two different source
files are feeling the crack-addled leakage of kernel types such as
u32 and s8 -- superior to __u64 and __u8, to be sure, but not valid
types in user-space -- define a header and include it as needed.
* src/nm-device-802-3-ethernet.c: Include kernel-types.h
* src/nm-device-802-3-ethernet.h: Remove defines.
* src/wpa.c: Remove defines and include kernel-types.h.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1393 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device-802-3-ethernet.c: In case local copies of glibc do not
define if_mii(), open code the same results, and do so without any
type punning.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1320 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device-802-3-ethernet.c: Use the if_mii() inline function that
is defined in <linux/mii.h> to return the mii_ioctl_data structure
from the ifreq structure in lieu of an open coded solution. Removes
a life-threatening type-punning.
* configure.in: Remove '-Wno-strict-aliasing' as we no longer pun any
types, ever, whatsoever, baby.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1316 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device-802-11-wireless.c, src/nm-device-802-11-wireless.h,
src/nm-device-802-3-ethernet.c, src/nm-device-802-3-ethernet.h,
src/nm-device.c: Fix a FIXME! Reimplement the function
nm_device_update_hw_address() in device subclass variants,
nm_device_802_3_ethernet_set_address() and
nm_device_802_11_wireless_set_address(), hook them up, and use them.
This fixes the existing bug where MAC addresses are all zeros.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1309 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device-802-11-wireless.c
src/nm-device.[ch]
- Add hooks to subclasses for stage3_ip_config_start and
stage4_ip_config_timeout
* src/nm-device-802-3-ethernet.c
- (real_get_generic_capabilities): make devices NM-supported
by default
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1251 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManager.c
- Move link-checking/probing into the device subclasses
themselves
* src/nm-device.[ch]
src/nm-device-802-11-wireless.c
src/nm-device-802-3-ethernet.c
- Do periodic link checking in device subclasses rather
than being triggered from NetworkManager.c
- discover_wireless_capabilities -> get_wireless_capabilities
- discover_generic_capabilities -> get_generic_capabilities
- Device subclass activation routines now return a value of type
NMActStageReturn to indicate what step to perform next
- Devices now override stage4_get_ip4_config if they choose
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1249 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* refactor NMDevice into a GObject-based framework with separate
objects for wired and wireless. The following files are no
longer used but should stick around for a bit so we don't
loose code through the cracks:
NetworkManagerDevice.c
NetworkManagerDevice.h
NetworkManagerWireless.c
NetworkManagerWireless.h
The intent here is to allow each device type to manage its own
connection & activation life-cycle, ie to allow wireless devices
to interface with wpa_supplicant, etc. There's a fair bit of
encapsulation breakage right now that should gradually get pulled
back into each device, along with things like periodic property
updates and link probing.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1244 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
