If IPV6CP terminates before IPCP, pppd enters the RUNNING phase and we
start IP configuration without having an IP interface set, which
triggers assertions.
Instead, add a SetIfindex() D-Bus method that gets called by the
plugin when pppd becomes RUNNING. The method sets the IP ifindex of
the device and starts IP configuration.
https://bugzilla.redhat.com/show_bug.cgi?id=1515829
The number of authentication retires is useful also for passwords aside
802-1x settings. For example, src/devices/wifi/nm-device-wifi.c also has
a retry counter and uses a hard-coded value of 3.
Move the setting, so that it can be used in general. Although it is still
not implemented for other settings.
This is an API and ABI break.
Since commit 4a6fd0e83e (device: honor the
connection.autoconnect-retries for 802.1X) and the related bug bgo#723084,
we reuse the autoconnect-retries setting to control the retry count
for requesting passwords.
I think that is wrong. These are two different settings, we should not
reuse the autoconnect retry counter while the device is still active.
For example, the user might wish to set autoconnect-retries to infinity
(zero). In that case, we would retry indefinitly to request a password.
That could be problematic, if there is a different issue with the
connection, that makes it appear tha the password is wrong.
A full re-activation might succeed, but we would never stop retrying
to authenticate. Instead, we should have two different settings for
retrying to authenticate and to autoconnect.
This is a change in behavior compared to 1.8.
Names like
- nm_settings_connection_get_autoconnect_retries
- nm_settings_connection_set_autoconnect_retries
- nm_settings_connection_reset_autoconnect_retries
are about the same thing, but they are cumbersome to grep
because they share not a common prefix.
Rename them from SUBJECT_VERB_OBJECT to SUBJECT_OBJECT_VERB,
which sounds odd in English, but seems preferred to me.
Now you can grep for "nm_settings_connection_autoconnect_retries_" to
get all accessors of the retry count, or "nm_settings_connection_autoconnect_"
to get all accessors related to autoconnect in general.
Replace the usage of g_str_hash() with our own nm_str_hash().
GLib's g_str_hash() uses djb2 hashing function, just like we
do at the moment. The only difference is, that we use a diffrent
seed value.
Note, that we initialize the hash seed with random data (by calling
getrandom() or reading /dev/urandom). That is a change compared to
before.
This change of the hashing function and accessing the random pool
might be undesired for libnm/libnm-core. Hence, the change is not
done there as it possibly changes behavior for public API. Maybe
we should do that later though.
At this point, there isn't much of a change. This patch becomes
interesting, if we decide to use a different hashing algorithm.
Instead of having 3 properties @gateway, @never_default and @has_gateway
on NMIP4Config/NMIP6Config that determine the default-route, track the
default-route as a regular route.
The gateway setting is the configuration knob for the default-route.
Since an NMIP4Config/NMIP6Config instance only has one gateway property,
it cannot track more then one default-routes (see related bug rh#1445417).
Especially with policy routing, it might be interesting to configure a
default-route in multiple tables.
Also, later it might be interesting to allow adding default-routes as
regular static routes in a connection, so that the user can configure additional
route parameters for the default-route or add default-routes in multiple tables.
With this patch, default-routes now have a rt_source property according to their
origin.
Also, the previous commits of this branch broke handling of the
default-route :) . That should be working now again.
- clearify in the manual page that setting retry to 1 means to try
once, without retry.
- log the initially set retry value in nm_settings_connection_get_autoconnect_retries().
- use nm_settings_connection_get_autoconnect_retries() in
nm_settings_connection_can_autoconnect().
A better name is link_speed_update(), because it re-reads and
sets the speed value.
Also, move _notfiy() after logging. It doesn't matter in this
case, but we should first log, and then do actions that have potentially
complex side-effects.
Now, that NMDeviceClass:carrier_changed_notify() is no longer called as
deferred action, we can check for DCB state there, instead or registering
to the NM_DEVICE_CARRIER notifications.
Don't give the subclass the ability to override the parents
behavior. The parent implementation is not intended to allow
for that. Instead, restrict the flexibility of how the virtual
function integrates with the larger picture. That means, the
virtual function is only called at one place, and there is only
one implementation in NMDeviceEthernet (and it doesn't really
matter whether the implementation chains up the parent implementation
or not).
Reduce the use of NM_PLATFORM_GET / nm_platform_get() to get
the platform singleton instance.
For one, this is a step towards supporting namespaces, where we need
to use different NMNetns/NMPlatform instances depending on in which
namespace the device lives.
Also, we should reduce our use of singletons. They are difficult to
coordinate on shutdown. Instead there should be a clear order of
dependencies, expressed by owning a reference to those singelton
instances. We already own a reference to the platform singelton,
so use it and avoid NM_PLATFORM_GET.
(cherry picked from commit 94d9ee129d)
Commit 4a6fd0e83e ("device: honor the connection.autoconnect-retries
for 802.1X") added a reset of the autoconnect retries when the device
changes state, because the retry logic for 802.1x is implemented in
NMDeviceEthernet. For other connections, we should not reset the
retries as NMPolicy handles them.
Fixes: 4a6fd0e83e
This argument is only relevant when the NMActStageReturn argument
indicates NM_ACT_STAGE_RETURN_FAILURE. In all other cases it is ignored.
Rename the argument to make the meaning clearer. The argument is passed
through several layers of code, it isn't obvious that this argument only
matters for the failure case. Also, the distinct name makes it easier
to distinguish from other uses of the "reason" name.
While at it, do some drive-by cleanup:
- use g_return_*() instead of g_assert() to have a more graceful
assertion.
- functions like dhcp4_start() don't need to return a failure reason.
Most callers don't care, and the caller who does can determine the
proper reason.
- allow omitting the out-argument via NM_SET_OUT().
NMDeviceEthernet and NMDeviceMacsec implement their own retry policy
for connection using 802.1X, and consider the credentials wrong when
the authentication fails for 3 times. In such case, they also disable
autoconnection for the device by setting the state reason NO_SECRETS.
This means that it's not possible at the moment to choose how many
times the authentication will be retried since they don't use the
standard reconnection logic.
Change NMDeviceEthernet and NMDeviceMacsec to use the number of
retries from connection.autoconnect-retries instead of a hardcoded
value to decide how many times the authentication must be restarted.
Use the per-connection authentication timeout for 802.1X Ethernet,
MACsec and Wi-Fi connections. In case the value is not defined, fall
back to the global one.
Instead of having a NM_SUPPLICANT_INTERFACE_CONNECTION_ERROR signal to notify
about failures during AddNetwork/SelectNetwork, accept a callback to report
success/failure.
Thereby, rename nm_supplicant_interface_set_config() to
nm_supplicant_interface_assoc().
The async callback is guaranteed to:
- be invoked exactly once, signalling success or failure
- always being invoked asyncronously.
The pending request can be (synchronously) cancelled via
nm_supplicant_interface_disconnect() or by disposing the
interface instance. In those cases the callback will be invoked
too, with error code cancelled/disposing.
Also change the signature of the NM_SUPPLICANT_INTERFACE_STATE signal,
to have three "int" type arguments. Thereby also fix the subscribers
to this signal that wrongly had type guint32, instead of guint
(which happens to be the same underlying type, so no real problem).
https://mail.gnome.org/archives/networkmanager-list/2017-February/msg00021.html
The -Wimplicit-fallthrough=3 warning is quite flexible of accepting
a fall-through warning.
Some comments were missing or not detected correctly.
Thereby, also change all other comments to follow the exact
same pattern.
Previously, we would have different functions like
- nm_match_spec_device_type()
- nm_match_spec_hwaddr()
- nm_match_spec_s390_subchannels()
- nm_match_spec_interface_name()
which all would handle one type of match-spec.
So, to get the overall result whether the arguments
match or not, nm_device_spec_match_list() had to stich
them together and iterate the list multiple times.
Refactor the code to have one nm_match_spec_device()
function that gets all relevant paramters.
The upside is:
- the logic how to evaluate the match-spec is all at one place
(match_device_eval()) instead of spread over multiple
functions.
- It requires iterating the list at most twice. Twice, because
we do a fast pre-search for "*".
One downside could be, that we have to pass all 4 arguments
for the evaluation, even if the might no be needed. That is,
because "nm-core-utils.c" shall be independend from NMDevice, it
cannot receive a device instance to get the parameters as needed.
As we would add new match-types, the argument list would grow.
However, all arguments are cached and fetching them from the
device's private data is very cheap.
(cherry picked from commit b957403efd)
Instead of overwriting ip4_config_pre_commit(), add a new function
get_mtu().
This also adds a default value in case there is no user-configuration.
This will allow us later to reset a default MTU based on the device
type.
Most implementations of realize_start_notify() do the same
for link_changed().
Let NMDevice's base implementation of realize_start_notify() call
link_changed() -- which by default does notthing. This allows subclasses
to only overwrite link_changed().
Instead of overwriting constructed(), update the s390 subchannels via
realize_start_notify(). This makes more sense and is also more similar
to what other device implementations do.
Previously, we would require a @self argument and the @call_id in
nm_act_request_cancel_secrets(), although the @call_id already has
a pointer to @self.
In principle that is not necessary, but it makes the API a bit
more robust as you need to care about the lifetime of the @req
as well.
However it is a bit inconvenient, because it requires that caller to
track both the activation request and the call-id.
Now, allow nm_act_request_get_secrets() to instruct the call-id to
take an additional reference to @self. Later on, we would allow to omit
the argument during cancelling. We only allow this, if the call-id
takes a reference to @self.
The ioctl APIs ethtool/mii require an interface ifname. That is inherrently
racy as interfaces can be renamed. This cannot be fixed, we can only
minimize the time between verifying the ifname and calling ioctl.
We already had problems with that when ethtool would access an interface
by name that didn't exists. See commit ab41c13b06 .
Checking for an existing interface only helps avoiding races when an interface
gets deleted. It does not help against renaming.
Go one step further, and instead of checking whether such an ifname
exists, try to get the ifname based on the ifindex immediately before
we need it.
This brings an additional overhead for each ethtool access.
Moving the PPP manager to a separate plugin that is loaded when needed
has the advantage of slightly reducing memory footprint and makes it
possible to install the PPP support only where needed.
https://bugzilla.gnome.org/show_bug.cgi?id=773482
This makes it easier to install the files with proper names.
Also, it makes the makefile rules slightly simpler.
Lastly, the documentation is now generated into docs/api, which makes it
possible to get rid of the awkward relative file names in docbook.
Added platform functions to retrieve device link mode status and to
switch from auto to manual link negotiation:
nm_platform_ethtool_get_link_settings
nm_platform_ethtool_set_link_settings
Keep the include paths clean and separate. We use directories to group source
files together. That makes sense (I guess), but then we should use this
grouping also when including files. Thus require to #include files with their
path relative to "src/".
Also, we build various artifacts from the "src/" tree. Instead of having
individual CFLAGS for each artifact in Makefile.am, the CFLAGS should be
unified. Previously, the CFLAGS for each artifact differ and are inconsistent
in which paths they add to the search path. Fix the inconsistency by just
don't add the paths at all.
