We are passing to the plugin only 'sett_flags', which is the bitmask
of flags to change and works together with 'sett_mask'; however,
plugins interpret that value as the new flags value. The result is
that if there is no change needed (0/0), the existing flags are lost.
Simple reproducer:
ip link add dummy1 type dummy
ip link set dummy1 up
ip addr add dev dummy1 fd01::12/64
sleep 1
# now, a external connection is created by NM
echo "BEFORE:"
cat /run/NetworkManager/system-connections/dummy1.nmconnection | grep "nm-generated\|volatile\|external"
# just add a new address to the interface to make it lose
# the external flag
ip addr add dev dummy1 172.25.42.1/24
sleep 1
echo "AFTER:"
cat /run/NetworkManager/system-connections/dummy1.nmconnection | grep "nm-generated\|volatile\|external"
Output:
BEFORE:
nm-generated=true
volatile=true
external=true
AFTER:
Fixes: d35d3c468a ('settings: rework tracking settings connections and settings plugins')
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1548
Autoconnect retries are not being tracked by connection anymore. Now it
is tracked per Device x Connection. In addition, autoconnect might be
blocked for the connection due to no secrets or user requested.
All the properties tracking the retries and blocked time were move to
DevConData and the functions to manipulate them aswell. In NMPolicy the
logic didn't change very much. Instead of looking into the connection
when the device failed activation it looks for DevConData.
This setting allows the user to remove the local route rule that is
autogenerated for both IPv4 and IPv6. By default, NetworkManager won't
touch the local route rule.
In kernel, the valid range for the weight is 1-256 (on netlink this is
expressed as u8 in rtnh_hops, ranging 0-255).
We need an additional value, to represent
- unset weight, for non-ECMP routes in kernel.
- in libnm API, to express routes that should not be merged as ECMP
routes (the default).
Extend the type in NMPlatformIP4Route.weight to u16, and fix the code
for the special handling of the numeric range.
Also the libnm API needs to change. Modify the type of the attribute on
D-Bus from "b" to "u", to use a 32 bit integer. We use 32 bit, because
we already have common code to handle 32 bit unsigned integers, despite
only requiring 257 values. It seems better to stick to a few data types
(u32) instead of introducing more, only because the range is limited.
Co-Authored-By: Fernando Fernandez Mancera <ffmancera@riseup.net>
Fixes: 1bbdecf5e1 ('platform: manage ECMP routes')
G_TYPE_CHECK_INSTANCE_CAST() can trigger a "-Wcast-align":
src/core/devices/nm-device-macvlan.c: In function 'parent_changed_notify':
/usr/include/glib-2.0/gobject/gtype.h:2421:42: error: cast increases required alignment of target type [-Werror=cast-align]
2421 | # define _G_TYPE_CIC(ip, gt, ct) ((ct*) ip)
| ^
/usr/include/glib-2.0/gobject/gtype.h:501:66: note: in expansion of macro '_G_TYPE_CIC'
501 | #define G_TYPE_CHECK_INSTANCE_CAST(instance, g_type, c_type) (_G_TYPE_CIC ((instance), (g_type), c_type))
| ^~~~~~~~~~~
src/core/devices/nm-device-macvlan.h:13:6: note: in expansion of macro 'G_TYPE_CHECK_INSTANCE_CAST'
13 | (G_TYPE_CHECK_INSTANCE_CAST((obj), NM_TYPE_DEVICE_MACVLAN, NMDeviceMacvlan))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Avoid that by using _NM_G_TYPE_CHECK_INSTANCE_CAST().
This can only be done for our internal usages. The public headers
of libnm are not changed.
This is the version shipped in Fedora 37. As Fedora 37 is now out, the
core developers switch to it. Our gitlab-ci will also use that as base
image for the check-{patch.tree} tests and to generate the pages. There
is a need that everybody agrees on which clang-format version to use,
and that version should be the one of the currently used Fedora release.
Also update the used Fedora image in "contrib/scripts/nm-code-format-container.sh"
script.
The gitlab-ci still needs update in the following commit. The change
in isolation will break the "check-tree" test.
If there were any pause options and any non-pause options,
the created setting was invalid.
I don't think it's reasonably possible to parse the broken settings.
So there is no workaround trying to read the existing broken settings
from disk. Luckily, the broken setting was just silently ignored by
the parser, so you simply could not persist certain settings.
https://bugzilla.redhat.com/show_bug.cgi?id=2134569
Fixes: 652ddca04c ('ethtool: Introducing PAUSE support')
instead of always re-requesting secrets on authentication failure ask NMSetting
if this is really needed. Currently only for the case "802.1x with TLS" this
behaves differently, i.e. no re-request.
For a long time we have a function like nm_uuid_generate_from_strings().
This was recently reworked and renamed, but it preserved behavior. Preserving
behavior is important for this function, because for the existing users,
we need to keep generating the same UUIDs.
Originally, this function was a variadic function with NULL sentinel.
That means, when you write
nm_uuid_generate_from_strings(uuid_type, type_arg, v1, v2, v3, NULL);
and v2 happens to be NULL, then v3 is ignored. That is most likely not
what the user intended. Maybe they had a bug and v2 should not be NULL.
But nm_uuid_generate_from_strings() should not require that all
arguments are non-NULL and it should not ignore arguments after the
first NULL.
For example, one user works around this via
uuid = nm_uuid_generate_from_strings_old("ibft",
s_hwaddr,
s_vlanid ? "V" : "v",
s_vlanid ? s_vlanid : "",
s_ipaddr ? "A" : "DHCP",
s_ipaddr ? s_ipaddr : "");
which is cumbersome and ugly.
That will be fixed next, by adding a function that doesn't suffer
from this problem. But "this problem" is part of the API of the
function, we cannot just change it. Instead, rename it and all
users, so they can keep doing the same.
New users of course should no longer use the "old" function.
For new uses of nm_uuid_generate_from_strings() we should generate version5
UUIDs and we should use unique namespace UUID arguments.
The namespace UUID was so far replaced by always passing a special prefix
as first string. It seems nicer to use a namespace instead.
Version3 UUIDs should not be used for new applications.
Hence, nm_uuid_generate_from_strings_v3() is no longer a desirable way to
generate UUIDs, so drop the wrapper.
nm_uuid_generate_from_strings() uses variant3 UUIDs based on MD5.
We shouldn't use that in the future.
We will add a replacement, so rename this function so that the "good"
name is free again. Of course, code that uses this function currently
relies on that the behavior doesn't change. We cannot just drop it
entirely, but will replace it by something that gives the same result.
Rename.
Have "len" before "elem_size". That is consistent with g_qsort_with_data()
and bsearch(), and is also what I would expect.
Note that the previous commit just renamed the function. If a user
of the new, changed API gets backported to an older branch, we will
get a compilation error and note that the arguments need to be adjusted.
The "nm_utils_" prefix is just too verbose. Drop it.
Also, Posix has a bsearch function. As this function
is similar, rename it.
Note that currently the arguments are provided in differnt
order from bsearch(). That will be partly addressed next.
That is the main reason for the rename. The next commit
will swap the arguments, so do a rename first to get a compilation
error when backporting a patch that uses the changed API.
For the ipoib connection, it is still considered as valid if the
profile does not set the device name. Also, the ifcfg reader should not
duplicate the checks that `nm_connection_verify()` performs (especially
not wrongly). Therefore, NM should skip validating the DEVICE when
reading the ifcfg file for the ipoib connection.
https://bugzilla.redhat.com/show_bug.cgi?id=2122703
When writing the p-key setting to the ifcfg file and reading the
setting back, the value has to be consistent. This is not limited to
p-key only, any setting value during the ifcfg write and read also has
to be consistent.
This was probably added in commit cb5606cf1c ('ifcfg-rh:
add support for Infiniband partitions') as this is also what
ifup-ib does ([1]). For NetworkManager profiles however, the
p-key is also valid without the high bit set, so the ifcfg-rh
reader must honor that.
[1] 0c9fb6ca7b/rdma.ifup-ib (L75)
- name things related to `in_addr_t`, `struct in6_addr`, `NMIPAddr` as
`nm_ip4_addr_*()`, `nm_ip6_addr_*()`, `nm_ip_addr_*()`, respectively.
- we have a wrapper `nm_inet_ntop()` for `inet_ntop()`. This name
of our wrapper is chosen to be familiar with the libc underlying
function. With this, also name functions that are about string
representations of addresses `nm_inet_*()`, `nm_inet4_*()`,
`nm_inet6_*()`. For example, `nm_inet_parse_str()`,
`nm_inet_is_normalized()`.
<<<<
R() {
git grep -l "$1" | xargs sed -i "s/\<$1\>/$2/g"
}
R NM_CMP_DIRECT_IN4ADDR_SAME_PREFIX NM_CMP_DIRECT_IP4_ADDR_SAME_PREFIX
R NM_CMP_DIRECT_IN6ADDR_SAME_PREFIX NM_CMP_DIRECT_IP6_ADDR_SAME_PREFIX
R NM_UTILS_INET_ADDRSTRLEN NM_INET_ADDRSTRLEN
R _nm_utils_inet4_ntop nm_inet4_ntop
R _nm_utils_inet6_ntop nm_inet6_ntop
R _nm_utils_ip4_get_default_prefix nm_ip4_addr_get_default_prefix
R _nm_utils_ip4_get_default_prefix0 nm_ip4_addr_get_default_prefix0
R _nm_utils_ip4_netmask_to_prefix nm_ip4_addr_netmask_to_prefix
R _nm_utils_ip4_prefix_to_netmask nm_ip4_addr_netmask_from_prefix
R nm_utils_inet4_ntop_dup nm_inet4_ntop_dup
R nm_utils_inet6_ntop_dup nm_inet6_ntop_dup
R nm_utils_inet_ntop nm_inet_ntop
R nm_utils_inet_ntop_dup nm_inet_ntop_dup
R nm_utils_ip4_address_clear_host_address nm_ip4_addr_clear_host_address
R nm_utils_ip4_address_is_link_local nm_ip4_addr_is_link_local
R nm_utils_ip4_address_is_loopback nm_ip4_addr_is_loopback
R nm_utils_ip4_address_is_zeronet nm_ip4_addr_is_zeronet
R nm_utils_ip4_address_same_prefix nm_ip4_addr_same_prefix
R nm_utils_ip4_address_same_prefix_cmp nm_ip4_addr_same_prefix_cmp
R nm_utils_ip6_address_clear_host_address nm_ip6_addr_clear_host_address
R nm_utils_ip6_address_same_prefix nm_ip6_addr_same_prefix
R nm_utils_ip6_address_same_prefix_cmp nm_ip6_addr_same_prefix_cmp
R nm_utils_ip6_is_ula nm_ip6_addr_is_ula
R nm_utils_ip_address_same_prefix nm_ip_addr_same_prefix
R nm_utils_ip_address_same_prefix_cmp nm_ip_addr_same_prefix_cmp
R nm_utils_ip_is_site_local nm_ip_addr_is_site_local
R nm_utils_ipaddr_is_normalized nm_inet_is_normalized
R nm_utils_ipaddr_is_valid nm_inet_is_valid
R nm_utils_ipx_address_clear_host_address nm_ip_addr_clear_host_address
R nm_utils_parse_inaddr nm_inet_parse_str
R nm_utils_parse_inaddr_bin nm_inet_parse_bin
R nm_utils_parse_inaddr_bin_full nm_inet_parse_bin_full
R nm_utils_parse_inaddr_prefix nm_inet_parse_with_prefix_str
R nm_utils_parse_inaddr_prefix_bin nm_inet_parse_with_prefix_bin
R test_nm_utils_ip6_address_same_prefix test_nm_ip_addr_same_prefix
./contrib/scripts/nm-code-format.sh -F
It can be useful to choose a different "ipv6.addr-gen-mode". And it can be
useful to override the default for a set of profiles.
For example, in cloud or in a data center, stable-privacy might not be
the best choice. Add a mechanism to override the default via global defaults
in NetworkManager.conf:
# /etc/NetworkManager/conf.d/90-ipv6-addr-gen-mode-override.conf
[connection-90-ipv6-addr-gen-mode-override]
match-device=type:ethernet
ipv6.addr-gen-mode=0
"ipv6.addr-gen-mode" is a special property, because its default depends on
the component that configures the profile.
- when read from disk (keyfile and ifcfg-rh), a missing addr-gen-mode
key means to default to "eui64".
- when configured via D-Bus, a missing addr-gen-mode property means to
default to "stable-privacy".
- libnm's ip6-config::addr-gen-mode property defaults to
"stable-privacy".
- when some tool creates a profile, they either can explicitly
set the mode, or they get the default of the underlying mechanisms
above.
- nm-initrd-generator explicitly sets "eui64" for profiles it creates.
- nmcli doesn' explicitly set it, but inherits the default form
libnm's ip6-config::addr-gen-mode.
- when NM creates a auto-default-connection for ethernet ("Wired connection 1"),
it inherits the default from libnm's ip6-config::addr-gen-mode.
Global connection defaults only take effect when the per-profile
value is set to a special default/unset value. To account for the
different cases above, we add two such special values: "default" and
"default-or-eui64". That's something we didn't do before, but it seams
useful and easy to understand.
Also, this neatly expresses the current behaviors we already have. E.g.
if you don't specify the "addr-gen-mode" in a keyfile, "default-or-eui64"
is a pretty clear thing.
Note that usually we cannot change default values, in particular not for
libnm's properties. That is because we don't serialize the default
values to D-Bus/keyfile, so if we change the default, we change
behavior. Here we change from "stable-privacy" to "default" and
from "eui64" to "default-or-eui64". That means, the user only experiences
a change in behavior, if they have a ".conf" file that overrides the default.
https://bugzilla.redhat.com/show_bug.cgi?id=1743161https://bugzilla.redhat.com/show_bug.cgi?id=2082682
See-also: https://github.com/coreos/fedora-coreos-tracker/issues/907https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1213
We have two variants of the function: nm_utils_ip4_netmask_to_prefix()
and _nm_utils_ip4_netmask_to_prefix(). The former only exists because it
is public API in libnm. Internally, only use the latter.
In practice, the profile probably validates, so all the
attribute names are well-known. There is thus no attribute
name that has "lock-" in the middle of the string.
Still, fix it. We want to match only at the begin of the
name.
The property wait-activation-delay will delay the activation of an
interface the specified amount of milliseconds. Please notice that it
could be delayed some milliseconds more due to other events in
NetworkManager.
This could be used in multiple scenarios where the user needs to define
an arbitrary delay e.g LACP bond configure where the LACP negotiation
takes a few seconds and traffic is not allowed, so they would like to
use nm-online and a setting configured with this new property to wait
some seconds. Therefore, when nm-online is finished, LACP bond should be
ready to receive traffic.
The delay will happen right before the device is ready to be activated.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1248https://bugzilla.redhat.com/show_bug.cgi?id=2008337
Of course, blocking and synchronous code is much simpler. But it's also
fundamentally wrong to block while we talk to systemd-hostnamed.
Refactor to use async operations.
