In some cases it is necessary to set a custom DHCP client-id during
early boot. For example, the firmware of some InfiniBand NIC uses a
48-bit MAC derived from the InfiniBand 20-byte MAC when doing
PXE. NetworkManager doesn't have any knowledge of that 48-bit MAC and
uses the full MAC as client-id, therefore getting a different lease.
Introduce a new option 'rd.net.dhcp.client-id' to specify a custom
client-id.
Resolves: https://issues.redhat.com/browse/RHEL-108454https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/2277
When reading NetworkManager.conf and NetworkManager-intern.conf we might
need to know if a group is defined or not, even if it's empty. This is
the case, for example, for [global-dns]. If [global-dns] is defined in
NM.conf overwrites the config from NM-intern, and if it's defined in any
of them they overwrite the configs from connections.
Before this patch, defining it as an empty group was ignored:
```
[global-dns]
```
Instead, it was necessary to add at least one key-value to the group.
Otherwise the group was silently ignored.
```
[global-dns]
searches=
```
Keep empty groups so we can take better decissions about overwritting
configs from other sources.
Clients like nmstate needs to know if the [global-dns] section is
defined or not, so they know if DNS configs from connections are
relevant or not. Expose it in D-Bus by always exposing "searches"
and "options" if it's defined, maybe as empty lists.
According to the documentation, settings from [global-dns] (searches and
options) are always merged with those from connections. However this was
not happening if no [global-dns-domain-*] exists, in which case
connections were ignored. This happened because in the past both global
sections must de defined or undefined. When this was changed to allow
defining only [global-dns], allowing it in the function that generates
the resolv.conf file was forgotten. Fix that now.
Anyway, merging these configs doesn't make much sense. The searches and
options defined in connections probably make sense only for the nameservers
defined in that same connection.
Because of this, make the following change: if global nameservers are
defined, use searches and options from [global-dns] only, because those
defined in connections may not make sense for the global nameservers. If
[global-dns] is missing, assume an empty [global-dns] section.
Also, if no global nameservers are defined, but [global-dns] is, make
that it overwrites the searches and options defined in connections. This
is not ideal, but none of the alternatives is better and at least this
is easy to remember.
So, the resulting rules from above are:
- If [global-dns] is defined, it always overwrite searches and options
from connections.
- If [global-dns-domain-*] is defined, it always overwrite nameservers
from connections. It overwrites searches and options too.
Fixes: 1f0d1d78d2 ('dns-manager: always apply options from [global-dns]')
Fixes: f57a848da5 ('man: update documentation about global DNS configuration')
Since 1.44 we accept a global-dns section without any global-dns-domain
section, so users can define searches and options without defining any
global DNS servers.
When set from the D-Bus API it was still rejected. Fix it.
Fixes: 1f0d1d78d2 ('dns-manager: always apply options from [global-dns]')
NM_SETTING_BOND_OPTION_LACP_ACTIVE is flagged as BOND_OPTFLAG_IFDOWN in
the kernel and hence should not be in OPTIONS_REAPPLY_SUBSET.
Authored-by: Mohith Kumar Thummaluru <mohith.k.kumar.thummaluru@oracle.com>
Signed-off-by: Mohith Kumar Thummaluru <mohith.k.kumar.thummaluru@oracle.com>
Signed-off-by: Pradyumn Rahar <pradyumn.rahar@oracle.com>
Switching to Fedora 43 changes the formatting. As Fedora 43 is not
released yet, it might still update clang-format and make it to change
again, as it happened in the past with other versions of Fedora.
Keep F42 until F43 is more stable.
If "flags" indicate that only secrets should be serialized and a peer
doesn't contain any secrets, skip it. Otherwise the function would
return a non-empty result when the connection contains no secret,
which causes issues later in the agent manager.
Fixes: e148ec07d5 ('libnm: add NMWireGuardPeer and libnm support for peers')
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/2244
The test calls g_main_context_ref() on client_context, which must then
be unreferenced.
Fixes: 88724ff169 ('libnm: add nm_client_wait_shutdown() function for cleaning up NMClient')
With the newer glib and libc in F42 and Ubuntu devel, the
"{left,right} double quotation mark" characters are printed in the
output message. The double quotation marks are multi-byte characters
and they can't be matched using a character class []. Update the
regexp accordingly.
During disposal we're calling to remove_all_aps that in turns schedules
an auto-activate recheck. As the device is removed, this triggers an
assertion when trying to do the recheck.
Fix that by not scheduling the recheck.
Example of backtrace that this commits fix:
0 __libc_do_syscall () at ../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:47
1 0xf746e270 in __pthread_kill_implementation (threadid=<optimized out>, signo=6, no_tid=<optimized out>) at pthread_kill.c:43
2 0xf743fbc6 in __GI_raise (sig=sig@entry=6) at ../sysdeps/posix/raise.c:26
3 0xf7431614 in __GI_abort () at abort.c:79
4 0xf775afea in g_assertion_message (domain=domain@entry=0x209a9f "nm", file=file@entry=0x1f7d59 "../NetworkManager-1.43.7/src/core/nm-policy.c", line=line@entry=1665,
func=func@entry=0x1f94d9 <__func__.6> "nm_policy_device_recheck_auto_activate_schedule",
message=message@entry=0x1d3e950 "assertion failed: (g_signal_handler_find(device, G_SIGNAL_MATCH_DATA, 0, 0, NULL, NULL, NM_POLICY_GET_PRIVATE(self)) != 0)")
at ../glib-2.72.3/glib/gtestutils.c:3253
5 0xf775b05e in g_assertion_message_expr (domain=0x209a9f "nm", file=0x1f7d59 "../NetworkManager-1.43.7/src/core/nm-policy.c", line=1665,
func=0x1f94d9 <__func__.6> "nm_policy_device_recheck_auto_activate_schedule",
expr=0x1f8afc "g_signal_handler_find(device, G_SIGNAL_MATCH_DATA, 0, 0, NULL, NULL, NM_POLICY_GET_PRIVATE(self)) != 0") at ../glib-2.72.3/glib/gtestutils.c:3279
6 0x0005f27a in nm_policy_device_recheck_auto_activate_schedule (self=0x1d3e950, device=0x209a9f) at ../NetworkManager-1.43.7/src/core/nm-policy.c:1679
7 0x000548ae in nm_manager_device_recheck_auto_activate_schedule (self=<optimized out>, device=<optimized out>) at ../NetworkManager-1.43.7/src/core/nm-manager.c:3113
8 0x00070622 in nm_device_recheck_auto_activate_schedule (self=<optimized out>) at ../NetworkManager-1.43.7/src/core/devices/nm-device.c:9249
9 0xf693aa8c in ap_add_remove (self=self@entry=0x1ceb0b0, is_adding=0, ap=<optimized out>, recheck_available_connections=0)
at ../NetworkManager-1.43.7/src/core/devices/wifi/nm-device-wifi.c:846
10 0xf693bcda in remove_all_aps (self=self@entry=0x1ceb0b0) at ../NetworkManager-1.43.7/src/core/devices/wifi/nm-device-wifi.c:863
11 0xf693f83c in dispose (object=0x1ceb0b0) at ../NetworkManager-1.43.7/src/core/devices/wifi/nm-device-wifi.c:3809
12 0xf7806e72 in g_object_unref (_object=<optimized out>) at ../glib-2.72.3/gobject/gobject.c:3636
13 g_object_unref (_object=0x1ceb0b0) at ../glib-2.72.3/gobject/gobject.c:3553
14 0x000f7fa4 in _nm_dbus_object_clear_and_unexport (location=location@entry=0xffa50644) at ../NetworkManager-1.43.7/src/core/nm-dbus-object.c:203
15 0x000576e4 in remove_device (self=self@entry=0x1c9c900, device=<optimized out>, quitting=quitting@entry=1) at ../NetworkManager-1.43.7/src/core/nm-manager.c:2289
16 0x0005a864 in nm_manager_stop (self=self@entry=0x1c9c900) at ../NetworkManager-1.43.7/src/core/nm-manager.c:7784
17 0x00023438 in main (argc=<optimized out>, argv=<optimized out>) at ../NetworkManager-1.43.7/src/core/main.c:530
Fixes: 96f40dcdcd ('wifi/ap: explicitly unexport AP and refactor add/remove AP')
Fixes: https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/issues/1791
When a software device becomes deactivated, we check whether it can
be unrealized (= deleted in kernel), by calling function
delete_on_deactivate_check_and_schedule().
The function returns without doing anything if there is a new
activation enqueued on the device (priv->queued_act_request), because
in that case the device will be reused for the next activation.
This commit fixes a problem seen in NMCI test
@ovs_delete_connecting_interface: sometimes the device is not
unrealized after deleting the connection. That happens because if the
queued activation fails, we never try again to unrealize the device.
Fix that by calling delete_on_deactivate_check_and_schedule() when
there is a failure starting the queued activation.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/2258
Unrealized software devices are always available for activation,
hardware devices never.
In nm_manager_get_best_device_for_activation() we call
nm_device_is_available() on candidate devices. Without this fix, any
unrealized software device would be not considered ready for
activation, which is wrong.
A software device can override the default implementation of
is_available(). For example NMDeviceOvsInterface does that and only
checks the OVSDB is ready.
Fixes: ba86c208e0 ('Revert "core: prevent the activation of unavailable OVS interfaces only"')
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/2253
The previous commit will raise an error if wrong list
separators are being used in an nmconnection file for dns-search to
avoid that they are all considered a single string.
However, existing users might have wrong values of dns-search that
currently are not preventing the connection of being activated. To avoid
that a NetworkManager update breaks existing configs, potentially even
cutting connectivity with remote machines, accept wrong separators in
keyfiles but emitting a warning.
Fixes: 919156552ede ('dns: ensure that no wrong separators are used for DNS search domains')
If wrong separators are used in they keyfile, like commas, the whole
line is considered as a single domain string, like "a.org,b.org".
Obviously this is invalid.
Ideally we should validate that the string is a valid domain, but this
gets quite complex if we want to support unicode characters, which are
valid for many top domains. For now, validate at least that no wrong
separators have been used.
Fixes https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/issues/1740
There are several flags specified in the NVMe Boot Specification
that may indicate DHCP was used to acquire information during the
pre-OS phase. This commit considers these additional sources,
based on actual NBFT table contents from different systems.
Although we've seen slight variations in firmware implementations
regarding the HFI IP Origin values when DHCP was configured, the
new set of rules still align with expectations.
With this configuration:
[Interface]
...
Address = 172.16.110.116/28,172.16.111.21/28
[Peer]
...
AllowedIPs = 172.16.110.112/28
[Peer]
...
AllowedIPs = 172.16.111.16/28
NetworkManager currently creates the following routes
(1) 172.16.110.112/28 dev wg0 proto static scope link metric 50 <-- peer route
(2) 172.16.110.112/28 dev wg0 proto kernel scope link src 172.16.110.116 metric 50 <-- prefix route
(3) 172.16.111.16/28 dev wg0 proto static scope link metric 50 <-- peer route
(4) 172.16.111.16/28 dev wg0 proto kernel scope link src 172.16.111.21 metric 50 <-- prefix route
If we try to reach a host in the second peer subnet, route (4)
matches. Route (4) doesn't specify a source IP and so the kernel will
use the first IP set on the interface (172.16.110.116), which is the
wrong one.
# ip route get 172.16.111.17
172.16.111.17 dev wg0 src 172.16.110.116 uid 0
To fix this problem, if the AllowedIP subnet is already reachable on
the interface via the prefix route of a static IP address, we should
skip adding the peer route.
wg-quick does something similar here:
https://git.zx2c4.com/wireguard-tools/tree/src/wg-quick/linux.bash?h=v1.0.20250521#n177
The condition in wg-quick is a bit different because it checks that no
duplicate route exists on the interface. We can't do exactly the same
because in NMDeviceWireGuard we don't have visibility on all the
platform routes.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/issues/1790https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/2254
