It's not strictly necessary, because contrary to g_atomic_pointer_get()
and g_atomic_pointer_compare_and_exchange(), glib's variant for the
setter is mostly fine.
Still, reimplement it, because we use typeof() eagerly and can thus add
more static checks than glib.
(cherry picked from commit 7c60e984b6)
(cherry picked from commit 6ded463f36)
(cherry picked from commit 976b358be6)
(cherry picked from commit 296a770a85)
g_steal_pointer() is marked as GLIB_AVAILABLE_STATIC_INLINE_IN_2_44,
that means we get a deprecated warning. Avoid that. We anyway
re-implement the macro so that we can use it before 2.44 and so
that it always does the typeof() cast.
(cherry picked from commit edfe9fa9a2)
(cherry picked from commit 6936a0613c)
Sometimes these function may set errno to unexpected values like EAGAIN.
This causes confusion. Avoid that by using our own wrappers that retry
in that case. For example, in rhbz#1797915 we have failures like:
errno = 0;
v = g_ascii_strtoll ("10", 0, &end);
if (errno != 0)
g_assert_not_reached ();
as g_ascii_strtoll() would return 10, but also set errno to EAGAIN.
Work around that by using wrapper functions that retry. This certainly
should be fixed in glib (or glibc), but the issues are severe enough to
warrant a workaround.
Note that our workarounds are very defensive. We only retry 2 times, if
we get an unexpected errno value. This is in the hope to recover from
a spurious EAGAIN. It won't recover from other errors.
https://bugzilla.redhat.com/show_bug.cgi?id=1797915
(cherry picked from commit 7e49f4a199)
The interface name might come from the command line or from a filename
(like during nm_vpn_wireguard_import()). It's not clear that this
is valid UTF-8. Asserting against that requires the caller to ensure
that the encoding is valid. That is cumbersome, especially since we anyway
check. Just report a regular error.
(cherry picked from commit 82fb8b00b4)
quoting 'man ovs-vswitchd.conf.db':
"The name must be alphanumeric and must not contain forward or backward
slashes."
OVS actually accepts a wider range of chars (all printable UTF-8 chars),
NetworkManager restricts this to ASCII char as it's a safer option for
now since OVS is not well documented on this matter.
https://bugzilla.redhat.com/show_bug.cgi?id=1788432
Fixes: e7d72a14f6 ('libnm-core: use different ifname validation function for OVS bridges, ports and interfaces')
(cherry picked from commit ed5a647ad1)
The only affected caller is nm_modem_manager_get_modems(), which
is used by NMDeviceBt for DUN connections. This is rather bad.
Fixes: 4154d9618c ('bluetooth: refactor BlueZ handling and let NMBluezManager cache ObjectManager data')
Fixes: e688e70b37 ('shared: add nm_utils_hash_values_to_array() helper')
(cherry picked from commit 037507f790)
Move the body of nm_utils_is_valid_iface_name() to
nm_utils_ifname_valid_kernel() so that it's shared between NM and
clients.
(cherry picked from commit 550f538564)
G_SOURCE_FUNC has attribute GLIB_AVAILABLE_MACRO_IN_2_58, which means
that the compiler will emit a warning when GLIB_VERSION_MAX_ALLOWED <
GLIB_VERSION_2_58. We currently define GLIB_VERSION_MAX_ALLOWED as
GLIB_VERSION_2_40. Redefine the macro to fix the following build error
when using glib >= 2.63.5 (the version in which the attribute was
added):
CC shared/nm-glib-aux/libnm_glib_aux_la-nm-shared-utils.lo
shared/nm-glib-aux/nm-shared-utils.c: In function ‘nm_g_unix_fd_source_new’:
shared/nm-glib-aux/nm-shared-utils.c:3679:13: error: Not available before [-Werror]
3679 | g_source_set_callback (source, G_SOURCE_FUNC (source_func), user_data, destroy_notify);
Fixes: 9c5741ccd2 ('shared/nm-glib: add compat implementation for G_SOURCE_FUNC()')
(cherry picked from commit 7f801685b2)
Found by covscan:
NetworkManager-1.22.0/shared/nm-glib-aux/nm-dbus-aux.c:361:
missing_va_end: va_end was not called for "ap".
Fixes: ce36494c0a ('shared: add nm_dbus_error_is() helper')
(cherry picked from commit 0de4fd6ebc)
"nm-glib-aux/nm-logging-fwd.h" provides macros like _LOGD() to be reused
by various parts which implement logging (by defining _NMLOG() accordingly).
libnm also has logging, however it uses different logging levels
aside LOGD_DEBUG.
Instead, implement _LOGD() using a define _LOGL_DEBUG, so that libnm can
redefine thos _LOGL_DEBUG defines and use the _LOGD() macro.
(cherry picked from commit 1b00fd2fd2)
inet_aton() also supports IPv4 addresses in octal (with a leading '0')
or where not all 4 digits of the address are present.
Add nm_utils_parse_inaddr_bin_full() to optionally fallback to
parse the address with inet_aton().
Note taht inet_aton() also supports all crazy formats, including
ignoring trailing garbage after a whitespace. We don't want to accept
that in general.
Note that even in legacy format we:
- accept everything that inet_pton() would accept
- additionally, we also accept some forms which inet_aton() would
accept, but not all.
That means, the legacy format that we accept is a superset of
inet_pton() and a subset of inet_aton(). Which is desirable.
(cherry picked from commit 8fbf67d138)
We have our NM specific logging and log levels. Maybe we should
not have that, and instead only rely on syslog (like systemd)
or glog(). Anyway, currently we have one way and it makes sense
that this is also used outside from "src".
Move the helper function to parse log levels from string to
"nm-logging-base.h" so that we can use the same logging levels
outside of core.
This moves code that is currently GPL2+ licensed to
LGPL2.1+. However as far as I see, this code was entirely written
by Red Hat employees who would not object with this change. Also,
it's as obvious and trivial as it gets.
We have "nm-logging-fwd.h", which (as the name implies) is header-only.
Add instead a "nm-logging-base.c", which also contains implementation for
logging functions that are not only useful under "src/nm-logging.c"
We will rework NMClient entirely. Then, the synchronous initialization will also use
the asynchronous code paths. The difference will be that with synchronous initialization,
all D-Bus interaction will be done with an internal GMainContext as current thread default,
and that internal context will run until initialization completes.
Note that even after initialization completes, it cannot be swapped back to the user's
(outer) GMainContext. That is because contexts are essentially the queue for our
D-Bus events, and we cannot swap from one queue to the other in a race
free manner (or a full resync). In other words, the two contexts are not in sync,
so after using the internal context NMClient needs to stick to that (at least, until
the name owner gets lost, which gives an opportunity to resync and switch back to the
user's main context).
We thus need to hook the internal (inner) GMainContext with the user's (outer) context,
so when the user iterates the outer context, events on the inner context get dispatched.
Add nm_utils_g_main_context_create_integrate_source() to create such a GSource for
integrating two contexts.
Note that the use-case here is limited: the integrated, inner main context must
not be explicitly iterated except from being dispatched by the integrating
source. Otherwise, you'd get recursive runs, possible deadlocks and general
ugliness. NMClient must show restrain how to use the inner context while it is
integrated.
Some compilers don't convert arrays as _Generic() type selectors to
their pointer type. That means, for those compilers the generic type
would be an array and not a pointer. Work around that by adding zero
to the pointer/array argument.
Also, I cannot get this to work with "clang-3.4.2-9.el7". Disable it
for that compiler. The value of the generic check is anyway that it only
needs to work with some compiler combinations. That will trigger a
compilation failure and we can fix the implementation also for compilers
that don't support the macro.
See-also: http://www.open-std.org/jtc1/sc22/wg14/www/docs/n1930.htm
There are two macros: NM_GOBJECT_PROPERTIES_DEFINE_BASE() and
NM_GOBJECT_PROPERTIES_DEFINE(). The former just defines the
property enums and the obj_properties array. The latter also
defines the functions _notify() and _nm_gobject_notify_together_impl().
That means, depending on whether you actually use _notify(), you have
to choose one of the macros. I think that is unnecessarily cumbersome.
Let's mark the function as _nm_unused so that the compiler doesn't
complain about the unused function. I don't think it's a problem
to use NM_GOBJECT_PROPERTIES_DEFINE() even if you don't actually use
_notify().
We preferably should use our convenience macros like _LOGD().
Since those macros expand to _NMLOG() (which needs to be defined
separately), we can move it to "nm-logging-fwd.h" and reuse.
glib really likes the numeric source IDs. That is, g_idle_add(), g_timeout_add(),
etc. return those IDs, that can then be destroyed with g_remove_source() (or
nm_clear_g_source()).
I think these numeric IDs are really not great.
- API like g_idle_add() and g_remove_source() only works with the g_main_context_get_default()
instance. That means, you cannot use this API for any other contexts. If you'd insist on using
numeric IDs, you'd need to call g_main_context_find_source_by_id() on the right context
first (but you'd also have to track the context alongside the ID).
- g_remove_source() requires first a call to g_main_context_find_source_by_id(). This involves
taking a mutex and doing an extra hash lookup.
Instead, it often seems preferable to use the GSource instance directly. It works
with any context, it can be referenced and unreferenced, and it can be destroyed, and
avoids the overhead of g_main_context_find_source_by_id().
The only downside really is that keeping a GSource pointer takes one pointer size, while
the guint source ID is usually only 4 bytes.
Anyway, I think we should deal more with GSource instances directly. Hence, add this
convenience macro, that works like nm_clear_g_source().
