Introduce a new "prefix-delegation" setting. It contains properties
related to the configuration of downstream interfaces using IPv6
prefix-delegation. The only property at the moment is "subnet-id",
which specifies which prefix to choose when the delegation contains
multiple /64 networks.
When a device in IPv6 shared mode obtains a prefix, it adds a new l3cd
of type L3_CONFIG_DATA_TYPE_PD_6 for that prefix. However, that l3cd
is never removed later and so the address lingers on the interface
even after the connection goes down. Remove the l3cd on cleanup.
Add a new flag "print_hex_negative_as_base10" in the property
descriptor _NMMetaPropertyTypData.
Normally, when a property has "base = 16", it is printed as unsigned
even if the gtype is signed.
For some properties, we want to print the hexadecimal representation
for positive values, and the base10 representation with minus sign for
negative values. A typical use case is to encode the default value as
"-1" and use positive values as a hexadecimal number.
When the carrier of an interface goes down, we defer the handling of
that event by some time (by default 6 seconds), to detect if the
carrier change was a spurious event.
It was observed that in some conditions the carrier goes down and we
register the timer for the deferred action on the device. Then the
link is deleted and recreated. At this point the timer fires and
aborts the new activation of the device.
Once the ifindex changes, cancel the timer for the deferred
carrier-down action.
Previously, IPv4 shared method will automatically enable the IPv4
global forwarding, all the per-interface level IPv4 forwarding settings
may be changed to match the global setting. Also, all the per-inteface
level forwarding settings can not be restored when deactivating the
shared connection. This is problematic as it may disrupt custom
configurations and lead to inconsistent forwarding behavior across
different network interfaces.
To address this, the implementation now ensures that the original
per-interface forwarding settings are preserved. Upon activating a
shared connection, instead of enabling IPv4 global forwarding
automatically, the per-interface forwarding is enabled on all other
connections unless a connection explicitly has the forwarding set to
"no" in its configuration. Upon deactivating all shared connection,
per-interface forwarding settings are restored to sysctl's default
value. Furthermore, deactivating any connection explicitly sets the
forwarding to sysctl's default value ensuring that network forwarding
behavior remains consistent.
Add support for configuring per-interface IPv4 sysctl forwarding setting
in NetworkManager. The feature allows users to configure the
net.ipv4.conf.<interface>.forward setting directly through
NetworkManager, enabling targeted forwarding configurations for
interfaces. This is particularly useful for cases such as enabling
forwarding for MetalLB load balancing without requiring a global
ip_forward=1 setting.
While forwarding setting can be managed via /etc/sysctl.conf,
configuring sysctl options for dynamically created or
software-configured interfaces (e.g., bridges) poses challenges. With
this feature, NetworkManager can configure these settings when
interfaces are created or updated, users no longer need to rely on
nm-dispatcher scripts for per-interface sysctl configuration, which can
be error-prone and complex. This feature ensures a more seamless and
integrated way to manage per-interface forwarding configurations,
reducing user overhead and improving usability in complex network
setups.
We do not support configuring per-device IPv6 sysctl forwarding because
in order to make per-device IPv6 sysctl forwarding work, we also need to
enable the IPv6 global sysctl forwarding setting, but this has potential
security concerns because it changes the behavior of the system to
function as a router, which expose the system to new risks and
unintended traffic flows, especially when enabling forwarding on the
interface the user previously explicitly disabled. Also enabling
per-device IPv6 sysctl setting will change the behavior of router
advertisement (accept_ra), which is not expected. Therefore, we
only support configuring per-device IPv4 sysctl forwarding option in
NetworkManager.
Resolves: https://issues.redhat.com/browse/RHEL-60237https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/2071https://gitlab.freedesktop.org/NetworkManager/NetworkManager-ci/-/merge_requests/1833
When a WG connection is connecting to an IPv6 endpoint, configures a
default route, and firewalld is active with IPv6_rpfilter=yes, it never
handshakes and doesn't pass traffic. This is because firewalld has a
IPv6 reverse path filter which is discarding these packets.
Thus, we add some firewall rules whenever a WG connection is brought up
that ensure the conntrack mark and packet mark are copied over.
These rules are largely inspired by wg-quick:
https://git.zx2c4.com/wireguard-tools/tree/src/wg-quick/linux.bash?id=17c78d31c27a3c311a2ff42a881057753c6ef2a4#n221
PyGObject 3.52 switched from gobject-introspection’s libgirepository 1.0
to glib’s libgirepository 2.0. As a result, the Python script would
no longer be able to find the `GIRepository` 2.0 typelib:
(process:1944): GLib-GIRepository-DEBUG: 15:25:14.521: Ignoring GIRepository-2.0.typelib because this libgirepository corresponds to GIRepository-3.0.typelib
We could update the script to support both versions of the typelib
but it is not really necessary. It was only used to add extra directories
from `$LD_LIBRARY_PATH` and the CLI argument to repository’s library path
but libgirepository already supports using `LD_LIBRARY_PATH` directly:
https://docs.gtk.org/girepository/method.Repository.prepend_library_path.html
Add some missing "(nullable)" annotations to parameters of the
callback functions in NMSecretAgentOld. Otherwise, PyGObject complains
that those parameters cannot be NULL when implementing a secret agent.
Fixes: d595f7843e ('libnm: add libnm/libnm-core (part 1)')
If an alias like `nmcli=nmcli --some-arguments` is used, bash completion
doesn't work. Fix it by using `command nmcli` from the nmcli-completion
script, so we ensure that the --complete-args is passed directly to
nmcli binary, not through an alias.
Contributed-by: Jonas Belouadi (@potamides)
Fixes https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/issues/1734
DBus errors were not properly handled after DBus calls and
that caused SIGSEGV. Now they are checked.
Fixes#1738
Fixes: b8714e86e4 ('dns: introduce configuration_serial support to the dnsconfd plugin')
Prevents NetworkManager from trying to determine the
transient hostname via DHCP or other means if "localhost"
is already configured as a static hostname, as the transient
hostname will be ignored by hostnamed if a static hostname
has already been set.
The idea is to create a pair of VLAN and MACVLAN with AddAndActivate if
they are not present, and otherwise follow the ordinary (GetApplied &
Reapply) procedure if the devices are already present.
This reverts commit 87d7ccc580.
This will be useful for updating configuration of Vlans and MacVlans,
some of having same MAC addresses as devices of other type.
This reverts commit cee0515f13.
This is done so that AddAndActivate() will return sensible errors in a
future patch that makes it support creating virtual devices.
In effect, all errors are logged in one place, therefore the log levels
are different. I don't think we're losing anything of value by being
a little less verbose here.
Domains are exported via D-Bus and so they must be valid UTF-8.
RFC 1035 specifies that domain labels can contain any 8 bit values,
but also recommends that they follow the "preferred syntax" which only
allows letters, digits and hypens.
Don't introduce a strict validation of the preferred syntax, but at
least discard non UTF-8 search domains, as they will cause assertion
failures later when they are sent over D-Bus.
Skip the configuration of the MPTCP endpoint when the address is in
the l3cd but is not yet configured in the platform. This typically
happens when IPv4 DAD is enabled and the address is being probed.
If we configure the endpoint without the address set, the kernel will
try to use the endpoint immediately but it will fail. Then, the
endpoint will not be used ever again after the address is added.
The name suggests that the function always removes all the watchers
with the given tag; instead it removes only "dirty" ones when the
"all" parameter is FALSE. Split the function in two variants.
When Dnsconfd service is enabled but not started, NetworkManager
should attempt to start it through DBus at least once.
Fixes: c6e1925dec ('dns: Add dnsconfd DNS plugin')
