In case the D-Bus interfaces start dropping off (typically all off them go
one by one when the object is being deleted), don't reset all the properties.
In particular, keep most properties around, only tear down "o" and "ao",
so that the object dependencies get torn down, but we still get enough
properties around to identify what the dead object was its heyday.
One example of where this is not good is when the device-removed signal
is emmitted, the device no longer has the ifname:
$ nmcli monitor
<quit NetworkManager>
(null): device removed
(null): device removed
...
Currently we assert that properties are reset on client teardown. That
is not the right thing to do and we're not going to do that in future.
However, what is important to test is that the properties are reset when
the daemon goes away. Test that.
The part where a device was created and its cleanup on client
description was only run randomly.
This is silly and gave me hard time. No reason not to be always running
it.
This verifies that what's in our public headers has version nodes, and
that they match Since: tags.
Not pretty (because python) but discovered a *lot* of issues.
"gen-metadata-nm-settings-libnm-core.xml" now contains also the names of
the NMSetting types, like "NMSettingConnection". That can be useful
to create NMSetting instances generically (that is, without knowing
the C API that gets called).
So you might be tempted to run
#!/bin/python
import gi
gi.require_version("NM", "1.0")
from gi.repository import GObject, NM
connection = NM.SimpleConnection()
# NM.utils_ensure_gtypes()
gtype_name = "NMSetting6Lowpan"
gtype = GObject.type_from_name(gtype_name)
setting = GObject.new(gtype)
connection.add_setting(setting)
However, without NM.utils_ensure_gtypes() that would not work, because
the GType is not yet created. For a user who doesn't know a priory all
setting types, it's not entirely clear how to make this work. Well, a
GObject introspection user could iterate over al NM.Setting* names and
try to instantiate the classes. However, that is still cumbersome, and not
accessible to a C user (without GI) and the currently loaded libnm
library may be newer and have unknown setting types.
In particular plain C user would need to know to call all the right
nm_setting_*_get_type(), functions, so it needs to know all the existing
52 type getters (and cannot support those from a newer libnm version).
With nm_utils_ensure_gtypes(), the user can get the typename and create
instances generically only using g_type_from_name().
Possible alternatives:
- libnm also has _nm_utils_init() which runs as __attribute__((constructor)).
We could also always instantiate all GType there. However, I don't like running
non-trivial, absolutely necessary code before main().
- hook nm_setting_get_type() to create all GType for the NMSetting
subclasses too. The problem is, that it's not entirely trivial to
avoid deadlock.
- hook nm_connection_get_type() to create all NMSetting types. That
would not deadlock, but it still is questionable whether we should
automatically, at non-obvious times instantiate all GTypes.
These are present in a public header yet are not properly commented,
versioned or exported.
Export them now. Another option would be to move them to a private
header; but I suspect someone has intended them to be exported at some
point.
Add them to @libnm_1_40_4 as opposed to @libnm_1_42_0 because we now know
this is going to be backported to 1.40.4 first.
Remove the functions from a public header. They were missing from
libnm.ver and thus never actually exported.
There's no point in salvaging them now as the whole NMVpnPluginOld has
been replaced NMVpnServicePlugin and new uses are discouraged.
Remove the function from a public header. It was missing from libnm.ver
and thus never actually exported.
There's no point in salvaging it now as it nm_device_get_hw_address()
exists as a better option.
Remove the function from a public header. It was missing from libnm.ver
and thus never actually exported.
There's no point in salvaging it now as it nm_device_get_hw_address()
exists as a better option.
Fix up the doc comment so that the gir data gets that right.
Fixes: 90d0ae0faf ('libnm: implement nm_client_activate_connection()/nm_client_add_and_activate_connection*() by using GDBusConnection directly')
g_memdup()'s size argument is a guint. There was CVE-2021-27219
about an integer overflow, which results in a buffer overflow.
In response to that, g_memdup2() was introduced in 2.68.
We can't use g_memdup2(), because our currently required glib
version is still 2.40.
There was no bug at those two places where g_memdup() was used.
It's just that g_memdup() is a code smell. Prevent any questions that
a reader of the code might have regarding the correctness of g_memdup()
(w.r.t. integer/buffer overflow), by not using it.
Instead use our internal nm_memdup() variant, which exactly exists for
this reason.
See-also: https://gitlab.gnome.org/GNOME/glib/-/issues/2319
Add a fire-and-forget function to wait for shutdown to be complete.
It's not entirely trivial to ensure all resources of NMClient are
cleaned up. That matters only if NMClient uses a temporary GMainContext
that the user wants to release while the application continues. For
example, to do some short-lived operations an a worker thread. It's
not trivial also because glib provides no convenient API to integrate
a GMainContext in another GMainContext. We have that code as
nm_utils_g_main_context_create_integrate_source(), so add a helper
function to allow the user to do this.
The function allows to omit the callback, in which case the caller
wouldn't know when shutdown is complete. That would still be useful
however, when integrating the client's context into the caller's
context, so that the client's context gets automatically iterated
until completion.
The following test script will run out of file descriptors,
when wait_shutdown() is not used:
#!/bin/python
import gi
gi.require_version("NM", "1.0")
from gi.repository import NM, GLib
for i in range(1200):
print(f">>>{i}")
ctx = GLib.MainContext()
ctx.push_thread_default()
nmc = NM.Client.new()
ctx.pop_thread_default()
def cb(unused, result, i):
try:
NM.Client.wait_shutdown_finish(result)
except Exception:
# cannot happen
assert False
else:
print(f">>>>> {i} complete")
nmc.wait_shutdown(True, None, cb, i)
while GLib.MainContext.default().iteration(False):
pass
When using async initialization with GAsyncInitable, the user usually can
only know that initialization is complete by passing a callback.
In simple cases, that can be cumbersome.
Also expose a flag that allows to poll that information.
Reuse the existing NM_CLIENT_INSTANCE_FLAGS for that. There is an
ugliness here, that suddenly there are instance flags that cannot be
set, but are still returned by the getter. But as this is a relatively
obscure feature, it seems more lightweight to implement it this way
(instead of adding a separate property and getter function).
NMConnection is an interface, implemented by NMSimpleConnection and
NMRemoteConnection.
For the most part, an NMConnection is only the content of the profile
(the settings). The "path" of the connection refers to the D-Bus path,
and wouldn't really make sense of the NMConnection interface or the
NMSimpleConnection type.
As such, the daemon (which only uses NMConnection and
NMSimpleConnection) never sets the path. Only libnm does.
NMClient uses NMRefString extensively for the D-Bus interface and the
path is already internalized. Take advantage of that. It is very likely,
that we are able to share the path instance in libnm at which point it
makes sense to use NMRefString.
Also, during nm_simple_connection_new_clone(), we can just take another
reference instead of cloning the string.
Have "len" before "elem_size". That is consistent with g_qsort_with_data()
and bsearch(), and is also what I would expect.
Note that the previous commit just renamed the function. If a user
of the new, changed API gets backported to an older branch, we will
get a compilation error and note that the arguments need to be adjusted.
The "nm_utils_" prefix is just too verbose. Drop it.
Also, Posix has a bsearch function. As this function
is similar, rename it.
Note that currently the arguments are provided in differnt
order from bsearch(). That will be partly addressed next.
That is the main reason for the rename. The next commit
will swap the arguments, so do a rename first to get a compilation
error when backporting a patch that uses the changed API.
Add option to set ofport_request when configuring ovs interface. When
connection with ofport_request configured is activated ovsdb will first
try to activated on the port set by ofport_request.
- name things related to `in_addr_t`, `struct in6_addr`, `NMIPAddr` as
`nm_ip4_addr_*()`, `nm_ip6_addr_*()`, `nm_ip_addr_*()`, respectively.
- we have a wrapper `nm_inet_ntop()` for `inet_ntop()`. This name
of our wrapper is chosen to be familiar with the libc underlying
function. With this, also name functions that are about string
representations of addresses `nm_inet_*()`, `nm_inet4_*()`,
`nm_inet6_*()`. For example, `nm_inet_parse_str()`,
`nm_inet_is_normalized()`.
<<<<
R() {
git grep -l "$1" | xargs sed -i "s/\<$1\>/$2/g"
}
R NM_CMP_DIRECT_IN4ADDR_SAME_PREFIX NM_CMP_DIRECT_IP4_ADDR_SAME_PREFIX
R NM_CMP_DIRECT_IN6ADDR_SAME_PREFIX NM_CMP_DIRECT_IP6_ADDR_SAME_PREFIX
R NM_UTILS_INET_ADDRSTRLEN NM_INET_ADDRSTRLEN
R _nm_utils_inet4_ntop nm_inet4_ntop
R _nm_utils_inet6_ntop nm_inet6_ntop
R _nm_utils_ip4_get_default_prefix nm_ip4_addr_get_default_prefix
R _nm_utils_ip4_get_default_prefix0 nm_ip4_addr_get_default_prefix0
R _nm_utils_ip4_netmask_to_prefix nm_ip4_addr_netmask_to_prefix
R _nm_utils_ip4_prefix_to_netmask nm_ip4_addr_netmask_from_prefix
R nm_utils_inet4_ntop_dup nm_inet4_ntop_dup
R nm_utils_inet6_ntop_dup nm_inet6_ntop_dup
R nm_utils_inet_ntop nm_inet_ntop
R nm_utils_inet_ntop_dup nm_inet_ntop_dup
R nm_utils_ip4_address_clear_host_address nm_ip4_addr_clear_host_address
R nm_utils_ip4_address_is_link_local nm_ip4_addr_is_link_local
R nm_utils_ip4_address_is_loopback nm_ip4_addr_is_loopback
R nm_utils_ip4_address_is_zeronet nm_ip4_addr_is_zeronet
R nm_utils_ip4_address_same_prefix nm_ip4_addr_same_prefix
R nm_utils_ip4_address_same_prefix_cmp nm_ip4_addr_same_prefix_cmp
R nm_utils_ip6_address_clear_host_address nm_ip6_addr_clear_host_address
R nm_utils_ip6_address_same_prefix nm_ip6_addr_same_prefix
R nm_utils_ip6_address_same_prefix_cmp nm_ip6_addr_same_prefix_cmp
R nm_utils_ip6_is_ula nm_ip6_addr_is_ula
R nm_utils_ip_address_same_prefix nm_ip_addr_same_prefix
R nm_utils_ip_address_same_prefix_cmp nm_ip_addr_same_prefix_cmp
R nm_utils_ip_is_site_local nm_ip_addr_is_site_local
R nm_utils_ipaddr_is_normalized nm_inet_is_normalized
R nm_utils_ipaddr_is_valid nm_inet_is_valid
R nm_utils_ipx_address_clear_host_address nm_ip_addr_clear_host_address
R nm_utils_parse_inaddr nm_inet_parse_str
R nm_utils_parse_inaddr_bin nm_inet_parse_bin
R nm_utils_parse_inaddr_bin_full nm_inet_parse_bin_full
R nm_utils_parse_inaddr_prefix nm_inet_parse_with_prefix_str
R nm_utils_parse_inaddr_prefix_bin nm_inet_parse_with_prefix_bin
R test_nm_utils_ip6_address_same_prefix test_nm_ip_addr_same_prefix
./contrib/scripts/nm-code-format.sh -F
Various synchronous methods (D-Bus calls) in libnm's NMClient API were
deprecated. The problem is that NMClient contains a cache of D-Bus
objects, and it gets updated by asynchronous events (D-Bus signals).
Those events get only processed when iterating the GMainContext, but
they are ordered.
When we perform a pseudo blocking D-Bus call with
g_dbus_connection_call_sync(), then GDBus creates a temporary
GMainContext, sends the request and iterates the internal context
blocking for the response. That is, this reply is not synchrounized with
the events that update the NMClient cache.
That is a problem for methods like nm_remote_connection_delete(),
because you call blocking delete, but afterwards the object is still in
the NMClient cache. That's why most blocking methods are deprecated.
While such blocking calls are therefore problematic, they can still be
very convenient to call from a simple script, a test tool or the python
REPL. See "examples/python/gi/nm-wg-set" which calls
nm_remote_connection_get_secrets(), and it would be (unnecessarily)
cumbersome to do the correct thing or using async API.
In particular, nm_remote_connection_get_secrets() doesn't retrieve an object
that is in the NMClient cache in the first place. Sure, the result is
out of order with the cache, but it's not obviously related and in most
cases it wouldn't matter to the user. So undeprecate this function again.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1345
It was documented to be an optional parameter. That is also in line
with g_dbus_connection_call(), which is essentially wrapped by nm_client_dbus_call().
Fixes: ce0e898fb4 ('libnm: refactor caching of D-Bus objects in NMClient')
The property wait-activation-delay will delay the activation of an
interface the specified amount of milliseconds. Please notice that it
could be delayed some milliseconds more due to other events in
NetworkManager.
This could be used in multiple scenarios where the user needs to define
an arbitrary delay e.g LACP bond configure where the LACP negotiation
takes a few seconds and traffic is not allowed, so they would like to
use nm-online and a setting configured with this new property to wait
some seconds. Therefore, when nm-online is finished, LACP bond should be
ready to receive traffic.
The delay will happen right before the device is ready to be activated.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1248https://bugzilla.redhat.com/show_bug.cgi?id=2008337
Introduction of a new setting ipv4.link-local, which enables
link-local IP addresses concurrently with other IP address assignment
implementations such as dhcp or manually.
No way is implemented to obtain a link-local address as a fallback when
dhcp does not respond (as dhcpd does, for example). This could be be
added later.
To maintain backward compatibility with ipv4.method ipv4.link-local has
lower priority than ipv4.method. This results in:
* method=link-local overrules link-local=disabled
* method=disabled overrules link-local=enabled
Furthermore, link-local=auto means that method defines whether
link-local is enabled or disabled:
* method=link-local --> link-local=enabled
* else --> link-local=disabled
The upside is, that this implementation requires no normalization.
Normalization is confusing to implement, because to get it really
right, we probably should support normalizing link-local based on
method, but also vice versa. And since the method affects how other
properties validate/normalize, it's hard to normalize that one, so that
the result makes sense. Normalization is also often not great to the
user, because it basically means to modify the profile based on other
settings.
The downside is that the auto flag becomes API and exists because
we need backward compatibility with ipv4.method.
We would never add this flag, if we would redesign "ipv4.method"
(by replacing by per-method-specific settings).
Defining a default setting for ipv4.link-local in the global
configuration is also supported.
The default setting for the new property can be "default", since old
users upgrading to a new version that supports ipv4.link-local will not
have configured the global default in NetworkManager.conf. Therefore,
they will always use the expected "auto" default unless they change
their configuration.
Co-Authored-By: Thomas Haller <thaller@redhat.com>
libnm-client-impl/nm-client.c:8398: warning: multi-line since docs found
libnm-client-impl/nm-device-macvlan.c:115: warning: multi-line since docs found
libnm-client-impl/nm-device-vxlan.c:540: warning: multi-line since docs found
libnm-client-impl/nm-device-vxlan.c:92: warning: multi-line since docs found
libnm-core-impl/nm-setting-ethtool.c:41: warning: multi-line since docs found
libnm-core-impl/nm-setting-ip-config.c:2475: warning: multi-line since docs found
libnm-core-impl/nm-setting-ip-config.c:2504: warning: multi-line since docs found
The typedefs in nm-types.h confuse gtkdoc-scan. It generates a
libnm-sections.txt file like this:
<SECTION>
<FILE>nm-types</FILE>
<TITLE>NMDeviceOvs</TITLE>
NMAccessPoint
NMActiveConnection
NMCheckpoint
NMClient
NMDevice
...
Note the wrongly picked title and, more importantly, the object types in
a bogus section. This in turn makes gtkdoc-mkdb fail to include the
property and signal documentation in appropriate sections.
Without nm-types.h, we need to mind the header dependencies. This means
that we need to order the headers that define types before the ones that
use them. Also, we need to break the depencency loops in few palces.
In glib_dep we specify
"-DGLIB_VERSION_MIN_REQUIRED=GLIB_VERSION_2_40 -DGLIB_VERSION_MAX_ALLOWED=GLIB_VERSION_2_40"
which is the dependency we use almost everywhere. With g-ir-scanner
this causes compiler warnings:
[xxx] Generating NM-1.0.gir with a custom command
/src/NetworkManager/build/tmp-introspectnas6f9u5/NM-1.0.c: In function ‘dump_object_type’:
/src/NetworkManager/build/tmp-introspectnas6f9u5/NM-1.0.c:252:13: warning: Not available before 2.70
252 | if (G_TYPE_IS_FINAL (type))
| ^~~~~~~~~~~~~~~~~
/src/NetworkManager/build/tmp-introspectnas6f9u5/NM-1.0.c: In function ‘dump_fundamental_type’:
/src/NetworkManager/build/tmp-introspectnas6f9u5/NM-1.0.c:370:13: warning: Not available before 2.70
370 | if (G_TYPE_IS_FINAL (type))
| ^~~~~~~~~~~~~~~~~
g-ir-scanner: link: gcc -o /src/NetworkManager/build/tmp-introspectnas6f9u5/NM-1.0 /src/NetworkManager/build/tmp-introspectnas6f9u5/NM-1.0.o -L. -Wl,-rpath,. -Wl,--no-as-needed -L/src/NetworkManager/build/src/libnm-client-impl -Wl,-rpath,/src/NetworkManager/build/src/libnm-client-impl -lnm -lgio-2.0 -lgobject-2.0 -lglib-2.0 -lgmodule-2.0 -ludev -lgirepository-1.0 -lgio-2.0 -lgobject-2.0 -Wl,--export-dynamic -lgmodule-2.0 -pthread -lglib-2.0 -lglib-2.0
Work around that.
Meson's gnome.generate_gir() is not very flexibly in allowing to
pass extra `--cflags-begin {} --cflags-end` parameters.
Hack around by adding a pseudo dependency that resets
these defines.
See-also: https://gitlab.gnome.org/GNOME/gobject-introspection/-/merge_requests/331
See-also: 1234e5583a ('build/autotools: avoid compiler warning generating "NM-1.0.gir"')
libnm-core is also used by the daemon, thus currently dragging in
libnm-crypto there. But could we ever drop that dependency?
One use of the libnm-crypto is in functions like nm_utils_file_is_certificate()
in "nm-utils.h". These are part of the public API of libnm.
But this is not used by the daemon. Move it to "libnm-client-core"
to be closer to where it's actually used.
As we have unit tests in "libnm-core-impl/tests" that test this function,
those unit tests also would need to move to "libnm-client-impl".
Instead, add the actual implementation of these function to "libnm-crypto"
and test it there.
This patch moves forward declarations from public header "nm-utils.h" to
"nm-client.h". Arguably, "nm-client.h" is not a great name, but we don't
have a general purpose header in "libnm-client-public", so use this.
Note that libnm users can only include <NetworkManager.h> and including
individual files is not supported (and even prevented). Thus moving
the declarations won't break any users.
We expect to read NUL terminated strings. Upon NUL, we should do
something. Treat it as a line break.
Fixes: 8ae9cf4698 ('Revert "libnm: buffer reads in nm_vpn_service_plugin_read_vpn_details()"')
This partially reverts commit 4a9fcb0fc3, which replaced one-byte
reads with buffered ones in the VPN service plugin.
Unfortunately the buffering means that commands coming after the magic
"DONE" string were being pulled into the buffer. Secrets agents expect
a "QUIT" to come after the "DONE", and since with buffering "QUIT" was
in the buffer, this led to a twenty-second delay on every VPN
connection using a secrets manager.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1164
Fixes: 4a9fcb0fc3 ('libnm: buffer reads in nm_vpn_service_plugin_read_vpn_details()')
g_idle_add() uses G_PRIORITY_DEFAULT_IDLE priority. Most of the time we don't
care much about the priority.
But at the places that this patch changes, I think that using
G_PRIORITY_DEFAULT_IDLE (and following g_idle_add()) is more correct. The
reason for this is not very strong, except that it's probably the better
choice. And the old choice was made because I didn't realize that
g_idle_add() uses another default priority. Hence, the old choice was not
for good reasons either.
NMClient is strongly tied to the GMainContext with which it was created.
Several operations must only be called from within the context. There
was an assertion for that.
However, creating (and init_async()) should be allowed to call not
from within the GMainContext. So if the current context has no owner
(is not acquired), then it's also OK.
Fix the assertion for that.
Fixes: ce0e898fb4 ('libnm: refactor caching of D-Bus objects in NMClient')
When cloud-init job (metadata service crawler) starts, it sends the
SIGTERM signal to nm-cloud-setup and force the nm-cloud-setup to
restart, however, because the error is not initialized as NULL in
`_init_start_cancelled_cb()` before it is set, nm-cloud-setup will hit
a dumped core.
TO fix it, initialize the error as NULL in `_init_start_cancelled_cb()`.
https://bugzilla.redhat.com/show_bug.cgi?id=2027674
Fixes: ce0e898fb4 ('libnm: refactor caching of D-Bus objects in NMClient')
Backtrace:
#0 g_logv (log_domain=0x7f833a872071 "GLib", log_level=G_LOG_LEVEL_WARNING, format=<optimized out>, args=<optimized out>) at ../glib/gmessages.c:1413
#1 0x00007f833a81f043 in g_log (log_domain=<optimized out>, log_level=<optimized out>, format=<optimized out>) at ../glib/gmessages.c:1451
#2 0x00007f833ab97230 in nm_utils_error_set_cancelled (is_disposing=<optimized out>, instance_name=<optimized out>, error=0x7ffff79cb980) at src/libnm-glib-aux/nm-shared-utils.c:2599
#3 nm_utils_error_set_cancelled (is_disposing=0, instance_name=0x0, error=0x7ffff79cb980) at src/libnm-glib-aux/nm-shared-utils.c:2590
#4 _init_start_cancelled_cb (cancellable=<optimized out>, user_data=0x5640ca292150) at src/libnm-client-impl/nm-client.c:7324
#5 _init_start_cancelled_cb (cancellable=<optimized out>, user_data=0x5640ca292150) at src/libnm-client-impl/nm-client.c:7307
#6 0x00007f833a93094a in _g_closure_invoke_va (param_types=0x0, n_params=<optimized out>, args=0x7ffff79cbb40, instance=0x5640ca267020, return_value=0x0, closure=0x5640ca29d430)
at ../gobject/gclosure.c:873
#7 g_signal_emit_valist (instance=0x5640ca267020, signal_id=<optimized out>, detail=0, var_args=var_args@entry=0x7ffff79cbb40) at ../gobject/gsignal.c:3406
#8 0x00007f833a930a93 in g_signal_emit (instance=instance@entry=0x5640ca267020, signal_id=<optimized out>, detail=detail@entry=0) at ../gobject/gsignal.c:3553
#9 0x00007f833a9a6475 in g_cancellable_cancel (cancellable=0x5640ca267020) at ../gio/gcancellable.c:513
#10 g_cancellable_cancel (cancellable=0x5640ca267020) at ../gio/gcancellable.c:487
#11 0x00005640ca1a8bd4 in sigterm_handler (user_data=0x5640ca267020) at src/nm-cloud-setup/main.c:599
#12 0x00007f833a819d4f in g_main_dispatch (context=0x5640ca268ef0) at ../glib/gmain.c:3337
#13 g_main_context_dispatch (context=0x5640ca268ef0) at ../glib/gmain.c:4055
#14 0x00007f833a86e608 in g_main_context_iterate.constprop.0 (context=0x5640ca268ef0, block=block@entry=1, dispatch=dispatch@entry=1, self=<optimized out>) at ../glib/gmain.c:4131
#15 0x00007f833a819463 in g_main_loop_run (loop=0x5640ca24fdb0) at ../glib/gmain.c:4329
#16 0x00005640ca1a6d04 in nmc_client_new_waitsync (cancellable=0x5640ca267020, out_nmc=0x7ffff79cbfa0, error=0x7ffff79cbf98, first_property_name=0x5640ca1b11db "instance-flags",
first_property_name=0x5640ca1b11db "instance-flags") at src/libnm-client-aux-extern/nm-libnm-aux.c:129
#17 0x00005640ca1a3863 in main (argc=1, argv=<optimized out>) at src/nm-cloud-setup/main.c:639
gcc-12.0.1-0.8.fc36 is annoying with false positives.
It's related to g_error() and its `for(;;) ;`.
For example:
../src/libnm-glib-aux/nm-shared-utils.c: In function 'nm_utils_parse_inaddr_bin_full':
../src/libnm-glib-aux/nm-shared-utils.c:1145:26: error: dangling pointer to 'error' may be used [-Werror=dangling-pointer=]
1145 | error->message);
| ^~
/usr/include/glib-2.0/glib/gmessages.h:343:32: note: in definition of macro 'g_error'
343 | __VA_ARGS__); \
| ^~~~~~~~~~~
../src/libnm-glib-aux/nm-shared-utils.c:1133:31: note: 'error' declared here
1133 | gs_free_error GError *error = NULL;
| ^~~~~
/usr/include/glib-2.0/glib/gmessages.h:341:25: error: dangling pointer to 'addrbin' may be used [-Werror=dangling-pointer=]
341 | g_log (G_LOG_DOMAIN, \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
342 | G_LOG_LEVEL_ERROR, \
| ~~~~~~~~~~~~~~~~~~~~~~~
343 | __VA_ARGS__); \
| ~~~~~~~~~~~~
../src/libnm-glib-aux/nm-shared-utils.c:1141:13: note: in expansion of macro 'g_error'
1141 | g_error("unexpected assertion failure: could parse \"%s\" as %s, but not accepted by "
| ^~~~~~~
../src/libnm-glib-aux/nm-shared-utils.c:1112:14: note: 'addrbin' declared here
1112 | NMIPAddr addrbin;
| ^~~~~~~
I think the warning could potentially be useful and prevent real bugs.
So don't disable it altogether, but go through the effort to suppress it
at the places where it currently happens.
Note that NM_PRAGMA_WARNING_DISABLE_DANGLING_POINTER macro only expands
to suppressing the warning with __GNUC__ equal to 12. The purpose is to
only suppress the warning where we know we want to. Hopefully other gcc
versions don't have this problem.
I guess, we could also write a NM_COMPILER_WARNING() check in
"m4/compiler_options.m4", to disable the warning if we detect it. But
that seems too cumbersome.
