brcmfmac and possibly other drivers don't change the MAC address
right away, but instead the result is delayed. That is problematic
because we cannot continue activation before the MAC address is
settled.
Add a hack to workaround the issue by waiting until the MAC address
changed.
The previous attempt to workaround this was less intrusive: we would
just refresh the link once and check the result. But that turns out
not to be sufficent for all cases. Now, wait and poll.
https://bugzilla.gnome.org/show_bug.cgi?id=770456https://bugzilla.redhat.com/show_bug.cgi?id=1374023
- mode in init_resolv_conf_mode() must be initialized in
case it is NULL.
- drop the NULL sentinal from resolved_paths and make it
static.
- resolved_proxy_created() must handle the fact that @self
might be already destroyed.
- call_done() must not access @self before ensuring that
the call was not cancelled.
What's more, send_update() can be called by resolved_proxy_created(),
thus it must ensure that it has an @update_cancellable. Let
send_update() create and cancel the @update_cancellable().
Also, send_update() -- which now manages @update_cancellable
instead of update() -- must actually cancel the previous
cancellable, otherwise the callback again might access
a disposed @self.
Co-authored-by: Beniamino Galvani <bgalvani@redhat.com>
Add initial DNS backend that pushes DNS information into
systemd-resolved. Backend is choosen by default if the systems
resolv.conv is setup to pointing to one of the standard resolved
locations.
This doesn't handle global dns configuration.
Signed-off-by: Sjoerd Simons <sjoerd@luon.net>
https://bugzilla.gnome.org/show_bug.cgi?id=762540
A D-Bus signal is asynchronous and it can happen that nm-dhcp-helper
emits the "Event" signal before the server is able to register a handler:
NM_DHCP_HELPER=/usr/libexec/nm-dhcp-helper
nmcli general logging level TRACE
for i in `seq 1 500`; do $NM_DHCP_HELPER & done
journalctl -u NetworkManager --since '1 min ago' | grep "didn't have associated interface" | wc -l
499
Avoid that, by calling the synchronous D-Bus method "Notify".
Interestingly, this race seem to exist since 2007.
Actually, we called g_dbus_connection_signal_subscribe() from inside
GDBusServer:new-connection signal. So it is not clear how such a race
could exist. I was not able to reproduce it by putting a sleep
before g_dbus_connection_signal_subscribe(). On the other hand, there
is bug rh#1372854 and above reproducer which strongly indicates that
events can be lost under certain circumstances.
Now we instead g_dbus_connection_register_object() from the
new-connection signal. According to my tests there was no more race
as also backed by glib's documentation. Still, keep a simple retry-loop
in nm-dhcp-helper just to be sure.
https://bugzilla.redhat.com/show_bug.cgi?id=1372854https://bugzilla.redhat.com/show_bug.cgi?id=1373276
tv.tv_usec is guaranteed to have less then 6 digits, however rounding it up
we might reach 1000000 and thus the value becomes mis-aligned. To round
correctly, we would have to carry over a potential overflow to the seconds.
But that seems too much effort for little gain. Just truncate the value.
For "cloned-mac-address", the empty string "" is an invalid
value that is rejected by verify().
Commit 8eed671 changed how the property is serialized to D-Bus.
Before, it was serialized using _nm_utils_hwaddr_to_dbus().
For invalid or empty addresses, this would not serialize the
value on D-Bus (or before commit 76aa6f8e0, it would create
a bogus value with no array elements).
With commit 8eed671, the cloned-mac-address gets also serialized
as "assigned-mac-address" via _nm_utils_hwaddr_cloned_data_synth(),
which would pass on invalid strings that the server would then reject.
That breaks for example nmtui. Try editing a connection with
"cloned-mac-address" set to NULL. Note, as long as you don't edit
the cloned MAC address in nmtui, you can save the modification.
Once you start modifying the entry, you can no longer set an empty
MAC address as the server now receives the invalid empty string.
Thus, the "OK" button fails with
Unable to save connection:
802-3-ethernet.cloned-mac-address:
is not a valid MAC address
It also means, nmtui cannot modify the "cloned-mac-address" field to
become empty.
Fix that problem at various places by coercing "" to NULL.
Fixes: 8eed67122chttps://bugzilla.redhat.com/show_bug.cgi?id=1372799
Before switching to gdbus (before 1.2.0), NetworkManager used dbus-glib.
Most objects in the D-Bus API with properties had a signal
NetworkManager-specific "PropertiesChanged" signal. Nowadays, this way of
handling of property changes is deprecated for the common "PropertiesChanged"
signal on the "org.freedesktop.DBus.Properties" interface.
There were a few pecularities in 1.0.0 and earlier:
(1) Due to the implementation with dbus-glib, a property-changed
signal was emitted on *all* interfaces. For example:
- a change on a NMDeviceVeth of "NMDeviceEthernet.HwAddress" would be
emitted both for the interfaces "fdo.NM.Device.Ethernet" and
"fdo.NM.Device.Veth". Note that NMDeviceVeth is derived from
NMDeviceEthernet and there is no "HwAddress" on veth device.
- a change of "NMVpnConnection.VpnState" was emitted on both
interfaces "fdo.NM.VPN.Connection" and "fdo.NM.Connecion.Active".
Note that NMActiveConnection is the parent type of NMVpnConnection and
only the latter has a property "VpnState".
(2) NMDevice's "fdo.NM.Device" interface doesn't have a "PropertiesChanged"
signal. From (1) follows that all property-changes for this type were instead
invoked with an interface like "fdo.NM.Device.Ethernet" (or multiple
interfaces in case of NMDeviceVeth).
1.2.0 introduced gdbus, which gives us the standard "fdo.DBus.Properties"
signal. However, it made the mistake of not realizing (1), thus instead
of emitting the signal once for each interface, it would pick the first
one in the inheritance tree.
With 1.4.0, a bug from merge commit 844345e caused signals for devices
to be only emitted for the interface "fdo.NM.Device.Statistics", instead
of "fdo.NM.Device.Ethernet" or "fdo.NM.Device.Veth" (or both).
The latter is what bgo#770629 is about and what commit 82e9439 tried to fix.
However, the fix was wrong because it tried to do the theoretically correct
thing of emitting the property-changed signal exactly once for the
interface that actually ontains the property. In addition, it missed that
NMDevice doesn't have a PropertiesChanged signal, which caused signals for
"fdo.NM.Device" to get lost *sigh*.
Now, restore the (broken) behavior of 1.0.0. These old-style property changed
signals are anyway considered deprecated and exist solely to satisfy old clients
and preserve the old API.
Fixes: 63fbfad3705db5901e6a2a6a2fc332da0f0ae4be
https://bugzilla.gnome.org/show_bug.cgi?id=770629https://bugzilla.redhat.com/show_bug.cgi?id=1371920
After the fix in [1], if the connection is assumed we don't update its
firewall zone. The goal of that change was to prevent NM from
interfering with the configuration done externally on devices not
created by NM.
However if there is an assumed persistent connection active on the
device NM touches the configuration in other ways, for example it
configures DHCP and manages the default route. So it seems correct to
also update the firewall zone.
OTOH, if the connection is assumed-generated there is no persistent
connection specifying a firewall zone and updating it makes no sense.
Bug [1] was about not interfering with devices unknown to NM (for
which there is no persistent connection) and so this change should not
conflict with the previous fix.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1098281https://bugzilla.redhat.com/show_bug.cgi?id=1366288
nm_exported_object_notify() hooks GObject's property-change signal
and searches for the D-Bus interface to which to send the
PropertiesChanged signal.
Then it would enqueue the value encoded as GVariant in pending_notifications.
However, thereby the association between the property that changed and the
interface was lost. So later in idle_emit_properties_changed() it would
just pick the first interface with a properties-changed-id.
That is wrong. pending_notifications must be associated with the D-Bus
interface that we are going to notify. That is, each InterfaceData must
have its own separate list.
This is broken since introducing NMExportedObject and moving to gdbus.
Only now it was discovered as NMDevice itself has two D-Bus interfaces:
"Device" and "Device.Statistics".
Note that the order of the PropertiesChanged in our D-Bus API is not defined
so that later signals can reach the receiver before earlier signals.
Also, multiple change signals for one property may be combined.
That is not changed by this patch and is not considered a bug, but something
that our D-Bus API wrt. PropertiesChanged does not guarantee.
https://bugzilla.gnome.org/show_bug.cgi?id=770629
At this point we don't know if the slave has been using an assumed
connection that just vanished -- the best bet is to let the device be.
If it's meant to be unenslaved, it won't be due to an external event.
https://bugzilla.redhat.com/show_bug.cgi?id=1357738
