There seems to be an issue with glib/ffi that causes failures
to pass enum-typed arguments to signals (related bug rh#1260577).
Add a test for platform signals which, beside NM_CONFIG_SIGNAL_CONFIG_CHANGED,
is the only place where we use enum-typed arguments for signals.
Strangely, this test doesn't cause the failure, so it's unclear why
the workaround was necessary for "config-changed" signal (commit
e7d66f1df6).
(cherry picked from commit 52cd5ee612)
There seems to be a bug in glib/ffi that hits on s390x/ppc64 architecture.
It causes @changes in nm-dns-manager.c:config_changed_cb() to be NONE,
although it is clearly set (see the related bug rh #1260577 for glib).
Workaround this, by making the argument type a plain guint.
Note that the ill behavior is caught by test_config_signal() in
"src/tests/config/test-config.c".
Related: https://bugzilla.redhat.com/show_bug.cgi?id=1062301
(cherry picked from commit e7d66f1df6)
If DHCP fails for an assumed connection, NetworkManager would
transition the device to the FAILED and then to the ACTIVATED state
(because it is assumed); hence if the DHCP server goes temporarily
down the device will go into a permanent state without IP
configuration.
Fix this and try DHCP again after some time when the connection
is an assumed one.
https://bugzilla.redhat.com/show_bug.cgi?id=1246496
This would cause the ip_vti0 generic device (that appears upon insertion of
ip_vti module during libreswan ipsec stack init) to go managed and brought UP.
Without addresses assigned the device would cause all the VPN traffic to
disappear in the oblivion.
(cherry picked from commit 1c46ddf196)
Addresses the clash between the two commits which would cause the parent device
gateway to be overwritten with 0.0.0.0 upon route-based VPN activation:
Fixes: 063677101a
Fixes: 1465c1d326
(cherry picked from commit da2ae8ce4e)
On slow virtual machine, these tests could fail because the
timeout was too low. As in a successful run the timeouts should
not be reached anyway, just extend them.
(cherry picked from commit bf6187e030)
When the DHCPv6 lease received from the server contains multiple
addresses, dhclient generates a new BOUND event for each of
them. Instead of overwriting the previous IP6 configuration for each
BOUND event, we should try to detect if the new configuration belongs
to the same lease and merge its addresses with the existing one in
such case.
This allows NetworkManager to configure multiple addresses on an
interface via DHCPv6.
https://bugzilla.gnome.org/show_bug.cgi?id=681764https://bugzilla.redhat.com/show_bug.cgi?id=1244293
(cherry picked from commit 1d6e8e8da7)
Don't disconnect the device when the DHCP renewal fails and there are
already configured static IP addresses on the device. Instead, keep
the device up and try DHCP again after some time.
https://bugzilla.redhat.com/show_bug.cgi?id=1168388
(cherry picked from commit abc96ecdfd)
check_if_startup_complete() could be invoked from nm_settings_start() before
devices had chance to be added, which results in premature "startup complete"
and NM would quit when configure-and-quit=yes is set up.
Postpone actual check_if_startup_complete() resolution until we add all devices
and they are processed.
(gdb) bt
#0 0x00005555556401f3 in check_if_startup_complete (self=0x5555559f91d0)
at nm-manager.c:719
#1 0x00007ffff4d69de8 in g_closure_invoke () at /lib64/libgobject-2.0.so.0
#2 0x00007ffff4d7b70d in signal_emit_unlocked_R ()
at /lib64/libgobject-2.0.so.0
#3 0x00007ffff4d83471 in g_signal_emit_valist () at /lib64/libgobject-2.0.so.0
#4 0x00007ffff4d8372f in g_signal_emit () at /lib64/libgobject-2.0.so.0
#5 0x00007ffff4d6e4b5 in g_object_dispatch_properties_changed ()
at /lib64/libgobject-2.0.so.0
#6 0x00007ffff4d709d9 in g_object_notify () at /lib64/libgobject-2.0.so.0
#7 0x00005555556e232c in check_startup_complete (self=self@entry=0x555555a0e130) at settings/nm-settings.c:204
#8 0x00005555556e5203 in nm_settings_start (self=0x555555a0e130, error=error@entry=0x7fffffffe658) at settings/nm-settings.c:2122
#9 0x0000555555646d06 in nm_manager_start (self=0x5555559f91d0, error=0x7fffffffe658) at nm-manager.c:4153
#10 0x00005555555add43 in main (argc=1, argv=0x7fffffffe7c8) at main.c:428
(gdb)
Fixes:Beaker:NetworkManager_Test37_run_once_new_connection
https://bugzilla.redhat.com/show_bug.cgi?id=1256772
(cherry picked from commit 7edb53f660)
The parent of a link (IFLA_LINK) can be in another network namespace and
thus invisible to NM.
This requires the netlink attribute IFLA_LINK_NETNSID which is supported
by recent versions of kernel and libnl.
In this case, set the parent field to NM_PLATFORM_LINK_OTHER_NETNS
and properly handle this special case.
(cherry picked from commit 790a0713d2)
ETHTOOL_OPTS must be cleared when the wake-on-lan value is 'default'
and a "wol d" string must be appended when the value is 'none'.
Fixes: 2e0d0bc050
(cherry picked from commit cf455aa0e2)
It can happen on a regular basis when many events get raised.
It is probalby not avoidable and most likely not an issue, so
downgrade the warning to info level.
(cherry picked from commit 7f9cb13057)
The logging macros _LOGD(), etc. are specific to each
file as they format the message according to their context.
Still, they were cumbersome to define and their implementation
was repeated over and over (slightly different at times).
Move the declaration of these macros to "nm-logging.h".
The source file now only needs to define _NMLOG(), and either
_NMLOG_ENABLED() or _NMLOG_DOMAIN.
This reduces code duplication and encourages a common implementation
and usage of these macros.
(cherry picked from commit ad7cdfc766)
Don't clear NMDevice @master in nm_device_cleanup() if the device link
is still enslaved because this causes an inconsistent state in which
the slave in included in the @slaves field of master device but
@master of slave device is NULL.
In such state, if the master link gets deleted, NM receives a change
event for each slave and a deletion event for the master; the change
events should also remove slaves from @slaves of master device, but
since their @master field is NULL the removal can't be performed.
Later, when the master deletion event is received, @slaves is not empty
in dispose() of NMDevice and the following assertion is triggered:
dispose: runtime check failed: (priv->slaves == NULL)
https://bugzilla.redhat.com/show_bug.cgi?id=1243371
(cherry picked from commit b557f91a1b)
This downgrades the following warning down to debug-level.
<warn> Could not get scan request result: GDBus.Error:fi.w1.wpa_supplicant1.Interface.ScanError: Scan request rejected
It seems this ~error~ happens regularly, so warning about it is overly
alarming.
(cherry picked from commit ebc387638a)
NMManager was failing to initialize if there was only a private bus,
despite the fact that this is exactly the use case that the private
bus was added for.
The only other potentially-failing code in nm_manager_new() was adding
prop_filter to the D-Bus connection, but this can't really fail, so
just assert that it doesn't. And now, nm_manager_new() always
succeeds, so update the caller for that.
(cherry picked from commit 1c11c5cff1)
