Adds support for reapplying the `sriov.vfs` property. Note this
does not include `num_vfs`, as the configuration needs to be reset
and reconfigured from scratch in that case.
Previously, if an existing VF is modified (e.g. if we change the `trust`
flag), we reset all VF configurations, and started from scratch. But in
some cases, this is unnecessarily disruptive.
Resolves: https://issues.redhat.com/browse/RHEL-95844
After resuming from suspend, devices with wake-on-lan enabled are
temporarily set as unmanaged, and then managed again. At the beginning
of this process, an active device goes from state ACTIVATED to
UNMANAGED and is deconfigured via
"nm_device_cleanup(cleanup_type=CLEANUP_TYPE_DECONFIGURE)".
If the device is attached to a controller, the cleanup doesn't detach
it. Later when the device is managed again, NetworkManager tries to
create an assumed connection. Normally, this would fail because we
detect that the device is not configured. However, if there is a
controller-port relationship, the assumed connection generation
succeeds and the persistent connection doesn't go up.
As this is wrong, prevent the generation of the assumed connection by
detaching the port during a cleanup.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/issues/1766https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/2242
Fix the following error seen when running the build_clean.sh script
with LTO disabled:
In file included from ../src/libnm-glib-aux/nm-default-glib.h:66,
from ../src/libnm-glib-aux/nm-default-glib-i18n-prog.h:13,
from ../src/core/nm-default-daemon.h:11,
from ../src/core/platform/tests/test-link.c:6:
In function ‘_nm_auto_freev’,
inlined from ‘test_link_get_bridge_fdb’ at ../src/core/platform/tests/test-link.c:2732:33:
../src/libnm-glib-aux/nm-macros-internal.h:166:8: error: ‘addrs’ may be used uninitialized [-Werror=maybe-uninitialized]
166 | if (*p) {
| ^
../src/core/platform/tests/test-link.c: In function ‘test_link_get_bridge_fdb’:
../src/core/platform/tests/test-link.c:2732:33: note: ‘addrs’ was declared here
2732 | nm_auto_freev NMEtherAddr **addrs;
| ^~~~~
cc1: all warnings being treated as errors
Fixes: 16ef33d380 ('bond-slb: fix memory leak')
(cherry picked from commit b4a22ad2a9)
The "notify::controller" signal must be emitted on the port, not on
the controller.
Fixes: 1f05526ed7 ('core: drop NMDevice master and introduce controller')
(cherry picked from commit 012f1cbfac)
acd_data->probing_timestamp_msec indicates when the probing
started. It is used in different places to calculate the timeout for
certain operations. In particular, it is used to detect that the probe
creation took too long when handling the ACD_STATE_CHANGE_MODE_TIMEOUT
event.
If we reset this timestamp at every timer event, we'll never hit the
probe creation timeout. Therefore, the l3cfg will keep trying forever
to create the probe.
See: https://lists.freedesktop.org/archives/networkmanager/2025-July/000418.html
Fix this by not updating the timestamp during a timeout event.
Fixes: a09f9cc616 ('l3cfg: ensure the probing timeout is initialized on probe start')
(cherry picked from commit 407d753a5a)
verify() is setting an error without returning FALSE to make the
validation fail. When the parent is set, the device is a Infiniband
partition and it must have a p-key != -1.
Fixes: d595f7843e ('libnm: add libnm/libnm-core (part 1)')
(cherry picked from commit f4f1ecc7ea)
The DHCP search list option (119) can use the "message compression"
algorithm specified in RFC 1035 section 4.1.4 to reduce the size of
the message in presence of subdomains that appear multiple times.
When using the compression a label starts with:
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
| 1 1| OFFSET |
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
where the offset points to a previous domain.
Previously, the parsing code was taking the lower 6 bits of the first
byte, shifting them left 16 bits, and adding the next byte. Instead,
the shift should be of 8 bits.
The effect of this bug was that when the offset was greater than 255,
it was incorrectly parsed as a number larger than the message size,
and the parsing failed.
Note that while a single DHCP option can be at most 255 bytes, a DHCP
message can contain multiple instances of the same option. The
receiver must concatenate all the occurrences according to RFC 3396
and parse the resulting buffer.
Fixes: 6adade6f21 ('dhcp: add nettools dhcp4 client')
(cherry picked from commit a9d7abbc50)
If sendto() fails, the function returns and the remaining entries are
not deallocated. Use nm_auto_freev instead to free the array and the
pointer it contains.
Add a test to check that nm_auto_freev does the right thing on the
value returned by nm_linux_platform_get_bridge_fdb().
Fixes: 3f2f922dd9 ('bonding: send ARP announcement on bonding-slb link/carrier down')
(cherry picked from commit 16ef33d380)
Rename nm_linux_platform_get_link_fdb_table() to
nm_linux_platform_get_bridge_fdb(). The new name better indicates that
the function returns the bridge FDB entries.
(cherry picked from commit 7d23ed9f73)
The validation of embedded NUL character was skipped due to the wrong
order of arguments to memchr(). Fix it.
Fixes: 4043f82790 ('lldp: cleanup converting binary LLDP fields to string')
(cherry picked from commit ce17284c3f)
Linux UIDs/GIDs are 32-bit unsigned integer, with 4294967295 reserved
as undefined.
Before:
# useradd -u 4294967294 -M testuser
useradd warning: testuser's uid -2 outside of the UID_MIN 1000 and UID_MAX 60000 range.
# nmcli connection add type tun ifname tun1 owner 4294967294 ipv4.method disabled ipv6.method disabled
Error: Failed to add 'tun-tun1' connection: tun.owner: '4294967294': invalid user ID
After:
# useradd -u 4294967294 -M testuser
useradd warning: testuser's uid -2 outside of the UID_MIN 1000 and UID_MAX 60000 range.
# nmcli connection add type tun ifname tun1 owner 4294967294 ipv4.method disabled ipv6.method disabled
Connection 'tun-tun1' (5da24d19-1723-45d5-8e04-c976f7a251d0) successfully added.
# ip -d link show tun1
2421: tun1: <NO-CARRIER,POINTOPOINT,MULTICAST,NOARP,UP> mtu 1500 qdisc fq_codel state DOWN mode DEFAULT group default qlen 500
link/none promiscuity 0 allmulti 0 minmtu 68 maxmtu 65535
tun type tun pi off vnet_hdr off persist on user testuser ...
^^^^^^^^^^^^^
Fixes: 1f30147a7a ('libnm-core: add NMSettingTun')
(cherry picked from commit 253800238e)
Currently the bug is hidden because the macro is only called with
NM_SETTING_BOND_OPTION_ARP_IP_TARGET.
Fixes: 45c95e9314 ('device/bond: rework setting of arp_ip_target bond options')
(cherry picked from commit 1229fe5abd)
Running the build script with LTO disabled
("contrib/fedora/rpm/build_clean.sh -W lto") gives the following error:
In file included from ../src/libnm-std-aux/nm-default-std.h:102,
from ../src/libnm-glib-aux/nm-default-glib.h:11,
from ../src/libnm-glib-aux/nm-default-glib-i18n-lib.h:13,
from ../src/libnm-client-aux-extern/nm-default-client.h:11,
from ../src/nmcli/connections.c:6:
In function ‘_nm_auto_unref_ptrarray’,
inlined from ‘do_connection_add’ at ../src/nmcli/connections.c:6069:35:
../src/libnm-std-aux/nm-std-aux.h:1106:12: error: ‘props’ may be used uninitialized [-Werror=maybe-uninitialized]
1106 | if (*v) \
| ^
../src/libnm-glib-aux/nm-macros-internal.h:91:1: note: in expansion of macro ‘NM_AUTO_DEFINE_FCN0’
91 | NM_AUTO_DEFINE_FCN0(GPtrArray *, _nm_auto_unref_ptrarray, g_ptr_array_unref);
| ^~~~~~~~~~~~~~~~~~~
../src/nmcli/connections.c: In function ‘do_connection_add’:
../src/nmcli/connections.c:6069:35: note: ‘props’ was declared here
6069 | gs_unref_ptrarray GPtrArray *props;
| ^~~~~
cc1: all warnings being treated as errors
Fix it.
Fixes: bb850fda0e ('nmcli: connection: process port-type, type and controller first')
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/2236
(cherry picked from commit a9b66e254c)
When resolving the system hostname from DNS lookup, we use
nm_utils_validate_hostname() which checks that the result is a valid
hostname. A valid hostname is at most 64 characters on Linux. Anything
longer is discarded.
However, the reverse DNS lookup doesn't return a hostname, it returns
a DNS name. The DNS name can have multiple labels, each limited to 63
characters. The maximum length of the DNS name is 253 characters.
If the result is longer than 64 characters because it has multiple
labels, we should still accept it, provided that it is a valid DNS
name. Then when setting the hostname in the system, only the first
label will be kept.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/2243
Resolves: https://issues.redhat.com/browse/RHEL-104357
(cherry picked from commit b019883a9a)
The "notify::controller" signal must be emitted on the port, not on
the controller.
Fixes: 1f05526ed7 ('core: drop NMDevice master and introduce controller')
Commit c5d1e35f99 ('device: support reapplying bridge-port VLANs')
didn't update can_reapply_change() to accept the "bridge-port.vlans"
property during a reapply. So, it was only possible to change the
bridge port VLANs by updating the "bridge.vlan-default-pvid" property
and doing a reapply. Fix that.
Fixes: c5d1e35f99 ('device: support reapplying bridge-port VLANs')
(cherry picked from commit 261fa8db33)
If the bridge default-pvid is zero, it means that the default PVID is
disabled. That is, the bridge PVID is not propagated to ports.
Currently NM tries to merge the existing bridge VLANs on the port with
the default PVID from the bridge, even when the PVID is zero. This
causes an error when setting the new VLAN list in the kernel, because
it rejects VLAN zero.
Skip the merge of the default PVID when zero.
Fixes: c5d1e35f99 ('device: support reapplying bridge-port VLANs')
(cherry picked from commit bf79fbd678)
