nmcli should not perform checks on the interface name length,
this kind of operations should only be performed by the NetworkManager
daemon and not be duplicated inside cli applications.
(cherry picked from commit 15a8595575)
so that it gets compiled out in production builds, this check is
carried out anyway when the connection is created.
(cherry picked from commit 9e27252c27)
We will add a property NM_NDISC_RA_TIMEOUT for which this name is better
suited. The problem is really that our convention for object properties
and signals defines have no prefix to indicate whether it's a property
or a signal.
Rename.
(cherry picked from commit 10f0253f2e)
It is undefined behavior and can lead to crashes or memory corruption.
In practice, this only had an issue on Big Endian systems.
Fixes: fdbf4ae5e6 ('ifcfg-rh: add IPV4_DHCP_TIMEOUT key for ipv4.dhcp-timeout property')
(cherry picked from commit 9b82d29f5f)
If a function is only called once, it may not help to simplify the code
but make it more complicated. It would only simplify the code, if it
had a clear, distinct purpose. That isn't the case here. Also, the
IPv4 writer doesn't have such a function either. Drop and inline it.
(cherry picked from commit d06092acbd)
It feels wrong to schedule a timeout with G_MAXUINT32, if we actually
disabled the timeout. Of course, in practice there should be little
difference.
(cherry picked from commit 4c101f36ec)
This is C, we have almost no IDE support. And ctags/cscope is much more
helpful if we use unique names.
Don't use the get_dhcp_timeout() name, because that is already used in
"src/devices/nm-device.c" already. Rename.
(cherry picked from commit be4129bb2d)
LLMNR and mDNS settings can have their global default value configured
in "NetworkManager.conf".
Global default values should work the way that all regular values of the property
can be configured explicitly in the connection profile. The special "default" value
only indicates to allow lookup of the global default, but it should not have a
meaning of its own.
Note that if mDNS/LLMNR settings are left unspecified, we will set the
argument to SetLinkMulticastDNS() and SetLinkLLMNR() functions to "",
which means that systemd-resolved decides on a default. Also, depending
on the DNS plugin, the default value differs. This is all fine however.
In this case, the ultimate default value depends on other things (like
the DNS plugin), but each possible value is in fact explicitly
configurable. We also do that for "ipv6.ip6-privacy".
Anyway, cleanup the documentation a bit and try to better explain what
the default is.
(cherry picked from commit 3d07708f59)
Clarify that VPNs are considered first in case of same priority, and
also that it's the *best* default route that matters.
(cherry picked from commit bf4b53d453)
If the GetConnectionUnixProcessID() call fails, the process that
registered on the bus has died and we should ignore the name
appearance event.
(cherry picked from commit e94d76382c)
Generally, libnm's NMClient cache only wants to expose NMObjects that
are fully initalized. Most objects don't require anything special,
except NMRemoteConnection which waits for the GetSettings() call to complete.
NMObjects reference each other. For example, NMActiveConnection
references NMDevice and NMRemoteConnection. There is a desire that an
object is only ready, if the objects that it references are ready too.
In practice that is not done, because usually every objects references
other objects, that means all objects would be declared as non-ready
as long as any of them is still initializing. That does not seem
desirable. Instead, most objects (except NMRemoteConnection and now
NMActiveConnection) are considered ready and visible, once their first
notification completes. In case the objects reference any object that is
not yet ready, the references is NULL (but the source object is visible
already). This is also done this way, to cope with cycles where
objects reference each other. In practice, such cycles should not be
exposed by NetworkManager. However, libnm should be robust against that.
This has the undesired effect that when you call AddAndActivate(), then
the NMActiveConnection might already be visible while its
NMRemoteConnection isn't. That means, ac.get_connection() will
initially return NULL, until the remote connection becomes ready.
Also add a special handling that NMActiveConnection waits for their
NMRemoteConnection to be ready, before being ready itself.
Fixes: ce0e898fb4 ('libnm: refactor caching of D-Bus objects in NMClient')
(cherry picked from commit 425412a363)
`which` is convenient, but not installed in Fedora container images.
Fix detection of whether to use `dnf` or `yum`.
(cherry picked from commit 5cc8ca4038)
GCC 10 complains about accesses to elements of zero-length arrays that
overlap other members of the same object:
src/platform/nm-platform-utils.c: In function ‘nmp_utils_ethtool_get_permanent_address’:
src/platform/nm-platform-utils.c:854:29: error: array subscript 0 is outside the bounds of an interior zero-length array ‘__u8[0]’ {aka ‘unsigned char[0]’} [-Werror=zero-length-bounds]
854 | if (NM_IN_SET (edata.e.data[0], 0, 0xFF)) {
./shared/nm-glib-aux/nm-macros-internal.h:731:20: note: in definition of macro ‘_NM_IN_SET_EVAL_N’
Fix this warning.
(cherry picked from commit d892a35395)
GCC 10 complains about accesses to elements of zero-length arrays that
overlap other members of the same object:
src/platform/nm-platform-utils.c: In function ‘ethtool_get_stringset’:
src/platform/nm-platform-utils.c:355:27: error: array subscript 0 is outside the bounds of an interior zero-length array ‘__u32[0]’ {aka ‘unsigned int[0]’} [-Werror=zero-length-bounds]
355 | len = sset_info.info.data[0];
| ~~~~~~~~~~~~~~~~~~~^~~
In file included from src/platform/nm-platform-utils.c:12:
/usr/include/linux/ethtool.h:647:8: note: while referencing ‘data’
647 | __u32 data[0];
| ^~~~
Fix this warning.
(cherry picked from commit 16e1e44c5e)
I think this solution is not right, because "char buf" is not guaranteed
to have the correct alignment. Revert, and solve it differently.
This reverts commit 6345a66153.
(cherry picked from commit 1fd7e45139)
When we deactivate a virtual device, we usually schedule the deletion
of the link in an idle handler. That action will be executed at a
later time when the device is already in the disconnected state.
Similarly, for ovs interfaces we send the deletion command to the
ovsdb and then proceed to the disconnected state.
However, in the first case there is the guarantee that the link will
be deleted at some point, while for ovs interfaces it may happen that
ovs decides to reuse the same link if there is an addition
queued. Since reusing the same link confuses NM, let's implement
deactivate_async() for ovs-interfaces and wait that the link actually
goes away before proceeding.
https://bugzilla.redhat.com/show_bug.cgi?id=1782701https://gitlab.freedesktop.org/NetworkManager/NetworkManager/merge_requests/402
(cherry picked from commit 623a1e1f99)
G_SOURCE_FUNC has attribute GLIB_AVAILABLE_MACRO_IN_2_58, which means
that the compiler will emit a warning when GLIB_VERSION_MAX_ALLOWED <
GLIB_VERSION_2_58. We currently define GLIB_VERSION_MAX_ALLOWED as
GLIB_VERSION_2_40. Redefine the macro to fix the following build error
when using glib >= 2.63.5 (the version in which the attribute was
added):
CC shared/nm-glib-aux/libnm_glib_aux_la-nm-shared-utils.lo
shared/nm-glib-aux/nm-shared-utils.c: In function ‘nm_g_unix_fd_source_new’:
shared/nm-glib-aux/nm-shared-utils.c:3679:13: error: Not available before [-Werror]
3679 | g_source_set_callback (source, G_SOURCE_FUNC (source_func), user_data, destroy_notify);
Fixes: 9c5741ccd2 ('shared/nm-glib: add compat implementation for G_SOURCE_FUNC()')
(cherry picked from commit 7f801685b2)
Properly initialize 'overload' when the space in the file section
ends.
shared/n-dhcp4/src/n-dhcp4-outgoing.c: In function ‘n_dhcp4_outgoing_append’:
shared/n-dhcp4/src/n-dhcp4-outgoing.c:198:17: error: ‘overload’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
(cherry picked from commit b2620e798a)
GCC 10 complains about accesses to elements of zero-length arrays that
overlap other members of the same object:
src/platform/nm-platform-utils.c: In function ‘nmp_utils_ethtool_get_permanent_address’:
src/platform/nm-platform-utils.c:854:29: error: array subscript 0 is outside the bounds of an interior zero-length array ‘__u8[0]’ {aka ‘unsigned char[0]’} [-Werror=zero-length-bounds]
854 | if (NM_IN_SET (edata.e.data[0], 0, 0xFF)) {
./shared/nm-glib-aux/nm-macros-internal.h:731:20: note: in definition of macro ‘_NM_IN_SET_EVAL_N’
Fix this warning.
(cherry picked from commit 5076fc0ca0)
GCC 10 complains about accesses to elements of zero-length arrays that
overlap other members of the same object:
src/platform/nm-platform-utils.c: In function ‘ethtool_get_stringset’:
src/platform/nm-platform-utils.c:355:27: error: array subscript 0 is outside the bounds of an interior zero-length array ‘__u32[0]’ {aka ‘unsigned int[0]’} [-Werror=zero-length-bounds]
355 | len = sset_info.info.data[0];
| ~~~~~~~~~~~~~~~~~~~^~~
In file included from src/platform/nm-platform-utils.c:12:
/usr/include/linux/ethtool.h:647:8: note: while referencing ‘data’
647 | __u32 data[0];
| ^~~~
Fix this warning.
(cherry picked from commit 6345a66153)
Building with GCC 10 gives the following error:
multiple definition of_nm_jansson_json_object_iter_key';
libnm/.libs/liblibnm.a(libnm_core_la-nm-json.o):/builddir/build/BUILD/NetworkManager-1.23.1/libnm-core/nm-json.c:24: first defined here /usr/bin/ld:
libnm/.libs/liblibnm.a(libnm_core_la-nm-team-utils.o):/usr/include/jansson.h:202: multiple definition of _nm_jansson_json_object_iter';
This happens because GCC 10 defaults to -fno-common and so multiple
definitions of the same global variable are not merged together.
_nm_jansson_json_* symbols are defined in nm-json.c as void pointers
and, due to the following macros in nm-json.h:
#define json_object_iter_next (*_nm_jansson_json_object_iter_next)
...
the function declaration in jansson.h:
void *json_object_iter_next(json_t *object, void *iter);
becomes a global variable as well:
void *(*_nm_jansson_json_object_iter_next)(json_t *object, void *iter);
So, the symbol is present in nm-json.o and all other object files that
include nm-json.h, and -fcommon is required. Without it, it would be
necessary to define the symbols only in one place (for example,
nm-json.c), but then static inline functions from the jannson.h header
would still refer to the original (missing) jansson functions.
For the moment, just use -fcommon.
(cherry picked from commit d2d6a68697)
curl_multi_setopt() accepts CURLMOPT_* options, not CURLOPT_*
ones. Found by GCC 10:
clients/cloud-setup/nm-http-client.c:700:38: error: implicit conversion from ‘enum <anonymous>’ to ‘CURLMoption’ [-Werror=enum-conversion]
700 | curl_multi_setopt (priv->mhandle, CURLOPT_VERBOSE, 1);
Fixes: 69f048bf0c ('cloud-setup: add tool for automatic IP configuration in cloud')
(cherry picked from commit c11ac34f4c)
