Reported by coverity:
>>> CID 210222: Null pointer dereferences (NULL_RETURNS)
>>> Dereferencing a pointer that might be "NULL" "f" when calling
"fseek".
Fixes: ac5206aa9c ('2007-11-21')
(cherry picked from commit 581aa981c2)
(cherry picked from commit bb40de0ca0)
(cherry picked from commit cde95a3c75)
(cherry picked from commit 3293ad0fbc)
First I wanted to fix
test:ERROR:../src/ndisc/tests/test-ndisc-fake.c:373:test_preference_changed_cb: assertion failed (_a->timestamp == (data->timestamp1 + 3)): (9 == 10)
but that leads to a different failure:
test:ERROR:../src/ndisc/tests/test-ndisc-fake.c:375:test_preference_changed_cb: assertion failed (_a->lifetime == (9)): (10 == 9)
Instead, the start and end times must match exact (in their duration),
we only allow them to be shifted by up to one second.
Fixes: 8209095ee1 ('ndisc/tests: relax the assertion in "test-ndisc-fake.c"')
(cherry picked from commit b2f03544a7)
(cherry picked from commit 838777a891)
(cherry picked from commit 1470212f4c)
(cherry picked from commit 6f2731b6cb)
(cherry picked from commit 781849c029)
By having it a function, the assertion failure does not show the line
number of the origin. Make them a macro, so that we see where exactly it
failed.
(cherry picked from commit 3b896cc642)
(cherry picked from commit b1a7eda71d)
(cherry picked from commit 8316943338)
(cherry picked from commit 017bfbf4d7)
(cherry picked from commit 95beb170ea)
The 'peer' property of ovs-patch is inserted into the 'options' column
of the ovsdb 'Interface' table. The ovs-vswitchd.conf.db man page says
about it:
options : peer: optional string
The name of the Interface for the other side of the patch. The
named Interface’s own peer option must specify this Interface’s
name. That is, the two patch interfaces must have reversed name
and peer values.
Therefore, it is wrong to validate the peer property as an IP address
and document it as such.
Backport: note that on nm-1-22, we have nm_utils_ifname_valid() function
for validating OVS interface names. We don't have that here, so we
re-implement the name validation differently.
Fixes: d4a7fe4679 ('libnm-core: add ovs-patch setting')
(cherry picked from commit beb1dba8c1)
(cherry picked from commit 5598c039e4)
(cherry picked from commit 9b82c62f33)
(cherry picked from commit 87e79d214e)
nm_device_cleanup() can be called when the device no longer has an
ifindex. In such case, don't try to reset the MAC address as that
would lead to an assertion failure.
(cherry picked from commit 77b6ce7d04)
(cherry picked from commit 791a888cad)
(cherry picked from commit e1f76e7044)
(cherry picked from commit 5f22c06c53)
(cherry picked from commit 6beaa83d32)
We already set the MAC of OVS interfaces in the ovsdb. Unfortunately,
vswitchd doesn't create the interface with the given MAC from the
beginning, but first creates it with a random MAC and then changes it.
This causes a race condition: as soon as NM sees the new link, it
starts IP configuration on it and (possibly later) vswitchd will
change the MAC.
To avoid this, also set the desired MAC via netlink before starting IP
configuration.
https://bugzilla.redhat.com/show_bug.cgi?id=1852106https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/issues/483
(cherry picked from commit 47ec3d14d4)
(cherry picked from commit 60d10b146d)
(cherry picked from commit 0139995590)
(cherry picked from commit 69c5c5e767)
(cherry picked from commit 91d2b0fd5a)
When a user creates a ovs-interface with the same name of the parent
ovs-bridge, openvswitch considers the interface as the "local
interface" [1] and assigns the MAC address of the bridge to the
interface [2].
This is confusing for users, as the cloned MAC property is ignored in
some cases, depending on the ovs-interface name.
Instead, detect when the interface is local and set the MAC from the
ovs-interface connection in the bridge table.
[1] https://github.com/openvswitch/ovs/blob/v2.13.0/vswitchd/vswitch.xml#L2546
[2] https://github.com/openvswitch/ovs/blob/v2.13.0/vswitchd/bridge.c#L4744
(cherry picked from commit 5d4c8521a3)
(cherry picked from commit 7548c29a89)
(cherry picked from commit 127294babc)
(cherry picked from commit f54c5400c8)
(cherry picked from commit 1a08885080)
A connection that fails due to dependency-failed is not able to
reconnect until the master connection activates again; when this
happens, the master clears the blocked reason for all its slaves in
activate_slave_connections() and tries to reconnect them. For this to
work, the slave should be marked as blocked when it fails with
dependency-failed.
(cherry picked from commit 725fed01cf)
(cherry picked from commit e1755048e3)
(cherry picked from commit ecb134ac34)
(cherry picked from commit bb4781cc58)
(cherry picked from commit 70c642325f)
If the device state change (to disconnected or unmanaged) triggered by
a sleep event happens after the wake, the devices becomes wrongly
unmanaged and it's necessary to manually manage it again, or restart
NM.
During the wake event we should disconnect the device_sleep_cb()
callback for all devices because we don't want to react to state
changes anymore; in particular we don't need to detect when the device
becomes disconnected to unmanage it.
(cherry picked from commit fe2d93980b)
(cherry picked from commit 971897195a)
(cherry picked from commit 7913275b02)
(cherry picked from commit 6d0e8a2acf)
(cherry picked from commit 61c44dad91)
When there are two patch ports connected, each of them must reference
the other; however they can't be created in a single transaction
because they are part of different bridges (so, different
connections). Therefore, the first patch that gets activated will
always fail with "No usable peer $x exists in 'system' datapath" until
the second patch exists.
In theory we could also match the error message, however this doesn't
seem very robust as the message may slightly change in the future.
(cherry picked from commit ffeac35f04)
(cherry picked from commit 75cbf21738)
(cherry picked from commit 399aad15bf)
(cherry picked from commit 692689ead8)
When the server is restarted the write to unix socket fails with
EPIPE. In such case, don't fail all the calls in queue; instead, after
a sync of the ovsdb state (through a monitor call), start processing
the queue again, including the call that previously failed.
Add a retry counter to avoid that calls are stuck in the queue forever
in a hypothetical scenario in which the write always fails.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/459
(cherry picked from commit db37e530e8)
(cherry picked from commit 54254bf6fe)
(cherry picked from commit 166ad887f9)
If we change the the MTU of an ovs interface only through netlink, the
change could be overridden by ovs-vswitchd at any time when other
interfaces change. Set the MTU also in the ovsdb to prevent such
changes.
Note that if the MTU comes from the connection, we already set the
ovsdb MTU at creation time and so this other update becomes
useless. But it is needed when changing the MTU at runtime (reapply)
or when the MTU comes from a different source (e.g. DHCP).
(cherry picked from commit c2a9712945)
(cherry picked from commit e27a59c69e)
(cherry picked from commit 99ef891db6)
The ovs-vswitchd.conf.db(5) man page says about the the mtu_request
column in the Interface table:
"Requested MTU (Maximum Transmission Unit) for the interface. A
client can fill this column to change the MTU of an
interface [...] If this is not set and if the interface has
internal type, Open vSwitch will change the MTU to match the
minimum of the other interfaces in the bridge."
Therefore, if the connection specifies a MTU, set it early when adding
the interface to the ovsdb so that it will not be changed to the
minimum of other interfaces.
(cherry picked from commit ad12f26312)
(cherry picked from commit 7311d5e294)
(cherry picked from commit b81370f70b)
Introduce a nm_ovsdb_set_interface_mtu() function to update the MTU of
an ovs interface in the ovsdb.
(cherry picked from commit a4c2c1a843)
(cherry picked from commit c1be15a66e)
(cherry picked from commit 990f46505d)
When the ovs interface gets deactivated, it is released from the
master port and we call nm_device_update_from_platform_link (dev,
NULL) to ignore any later event for the interface. This is important
especially because it sets a zero ifindex on the interface and so,
later when the link disappears, we don't unmanage the device but
directly remove it.
However, since ovs commands are queued, the link could appear during
the deactivation and we need to ignore such events. Add a new device
method can_update_from_platform_link() for such purpose.
(cherry picked from commit e9fc1dea43)
(cherry picked from commit c4eb0c6852)
(cherry picked from commit 34a9247a64)
Tracking the deletion of link by ifindex is difficult because the
ifindex of the device is updated through delayed (idle) calls in
NMDevice and so there is the possibility that at a certain time the
device ifindex is not in sync with platform state. It seems simpler to
watch instead the interface name. The ugly thing is that the interface
name can be changed externally, but if users do that on an activating
device they are looking for trouble.
Also change the deactivate code to deal with the scenario where we
already created the interface in the ovsdb but the link didn't show up
yet. To ensure a proper cleanup we must wait that the link appears and
then goes away; however the link may never appear if vswitchd sees
only the last state in ovsdb, and so we must use a ugly timeout to
avoid waiting forever.
https://bugzilla.redhat.com/show_bug.cgi?id=1787989
(cherry picked from commit 9c49f8a879)
(cherry picked from commit 2e5e409bf2)
(cherry picked from commit 628706fab5)
When we deactivate a virtual device, we usually schedule the deletion
of the link in an idle handler. That action will be executed at a
later time when the device is already in the disconnected state.
Similarly, for ovs interfaces we send the deletion command to the
ovsdb and then proceed to the disconnected state.
However, in the first case there is the guarantee that the link will
be deleted at some point, while for ovs interfaces it may happen that
ovs decides to reuse the same link if there is an addition
queued. Since reusing the same link confuses NM, let's implement
deactivate_async() for ovs-interfaces and wait that the link actually
goes away before proceeding.
https://bugzilla.redhat.com/show_bug.cgi?id=1782701https://gitlab.freedesktop.org/NetworkManager/NetworkManager/merge_requests/402
(cherry picked from commit 623a1e1f99)
(cherry picked from commit a1b0edd24b)
(cherry picked from commit cb7c7c29bd)
This doesn't make any difference in practice, but it seems more correct.
It would cause issues if we decided to remove an interface from the
signal handler.
(cherry picked from commit e948ce7deb)
When an interface (other OVS device types can not fail) encounters an error
it indicates it by changing the error column. Watch for those changes so
that we can eventually communicate them to the OVS factory to deal with
them.
(cherry picked from commit f2c066e104)
Don't crash in situations, where the bridge or a port has a child with
UUID we don't know. This could happen if we mess up the parsing of
messages from OVSDB, but could also theoretically happen in OVSDB sends
us bad data.
(cherry picked from commit 99c7adc1e1)
How odd that such a macro does not exist yet. It seems like
the majorities of calls to g_slice_free() could be replaced
by this.
(cherry picked from commit dcdbe98406)
nm_connection_get_setting() returns a pointer of type NMSetting.
That is very inconvenient, because most callers will need the
the result pointer as a setting subtype (like NMSettingConnection).
That would be like g_object_new() returning a "GObject *" pointer,
which is technically correct but annoying.
In the past that problem was avoided by having countless accessors
like nm_connection_get_setting_ip4_config(), etc. But that just blows
up the API and also is not generic. Meaning: the type is not a function
argument but the function itself. That makes composing the code harder
as the setting type cannot be treated generically (as a function argument).
Anyway. Add an internal wrapper that returns a void pointer.
(cherry picked from commit c4788e611e)
Fixes: 2a4fb75d3b ('ifcfg: add support for "802-1x.system-ca-certs" setting')
(cherry picked from commit b4537f2c03)
(cherry picked from commit 5d8a0837b3)
(cherry picked from commit e11232de96)
(cherry picked from commit e00e764167)
Fixes: a83ab252ee ('ifcfg-rh: add support for 802-1x.password-raw property')
(cherry picked from commit 9fde21504e)
(cherry picked from commit 36ddd266a5)
(cherry picked from commit 52bb253f6b)
(cherry picked from commit 3afbaeb597)
