Deleting routes with metric 0 might end up deleting other
routes with a different metric.
Workaround this in platform to only delete a route with
metric 0 if such a route can be found prior to deletion.
Don't only look into the cache (which might be out of date).
Instead refetch the route we are about to delete to be sure.
There is still a race that we might end up deleting the wrong
route.
https://bugzilla.gnome.org/show_bug.cgi?id=741871https://bugzilla.redhat.com/show_bug.cgi?id=1172780
(cherry picked from commit 41e6c4fac1)
This match-any behavior ignoring metric is nowhere used. And even if we
would need such a behavior, using 0 is wrong because IPv4 routes can
have a metric of zero.
(cherry picked from commit 2cb3c7e8a0)
Handling a route with metric 0 effectively means
a metric of 1024 (user default). Adjust the add(),
delete() and exist() functions to consider routes
with metric 0 as 1024.
(cherry picked from commit 06e4eee0ce)
Write ipv4.route-metric and ipv6.route-metric property of
NMSettingConnection as IPV4_ROUTE_METRIC and IPV6_ROUTE_METRIC,
respectively.
(cherry picked from commit 3e33a5a6c5)
Conflicts:
src/settings/plugins/ifcfg-rh/tests/test-ifcfg-rh.c
On resume configured interfaces are unmanaged to clear their pre-resume
state and then re-managed. Eventually the interface should end up moving
to the DISCONNECTED state, which should trigger an auto-activate check in
the Policy. If connectivity checking was enabled, that auto-activate check
would fail because the Manager's state was still NM_STATE_ASLEEP.
This caused bridge slaves not to auto-activate on resume, which left bridges
without connectivity.
The manager never left NM_STATE_ASLEEP when connectivity checking was
enabled due to nm_manager_update_state() returning early when kicking
off a connectivity check. Instead, the manager's state should always
be updated to accurately reflect the current state.
https://bugzilla.redhat.com/show_bug.cgi?id=1162636https://bugzilla.gnome.org/show_bug.cgi?id=742675
(cherry picked from commit a687d1f9e0)
If a device assumes a connection without activating a user-requested or
NM-requested connection, then disable_ipv6 is not touched. When the device
is deactivated, it still isn't touched even though userspace IPv6LL
is enabled. This could lead to an user-requested activation with
IPv6 configuration, but disable_ipv6=1.
Whenever userspace IPv6LL is turned on, we should also set disable_ipv6=0
to ensure IPv6 can function. Userspace IPv6LL will ensure that the
interface does not have an address until the user/connection requests
it, which was the only reason that NM touched disable_ipv6 anyway.
fixes:NetworkManager_Test203_testcase_286589
fixes:NetworkManager_Test204_testcase_286590
https://bugzilla.gnome.org/show_bug.cgi?id=741773
(cherry picked from commit 984b0763d9)
teamd first adds the link and only then listens on the bus therefore we race
with it. Let's watch for the bus presence even for the teamd devices we didn't
add for all their lifetime and recheck for assumed connections as we see them.
(cherry picked from commit 03a5a85d6c)
We don't want to start a teamd instance when there's an externally added team
interface. We just don't want to try to the daemon if it's not there (addressed
by a later commit).
This reverts commit a78386b6d1.
Conflicts:
src/devices/team/nm-device-team.c
(cherry picked from commit 744e35e1d2)
When specifying '--enable-lto=anything' or '--disable-lto',
the configure script would always set enable_lto=yes.
The only way to disable lto, was *not* specifying the
configure option.
https://bugzilla.gnome.org/show_bug.cgi?id=742575
(cherry picked from commit 6eccfda0fa)
Program received signal SIGSEGV, Segmentation fault.
0x000000000041b3e5 in nmt_page_dsl_constructed (object=0x7fffec0228c0 [NmtPageDsl]) at nmt-page-dsl.c:109
109 priv->ethernet_page = nmt_page_ethernet_new (conn, nmt_editor_page_device_get_device_entry (NMT_EDITOR_PAGE_DEVICE (dsl)));
Missing separate debuginfos, use: debuginfo-install libffi-3.0.10-3.fc18.x86_64 newt-0.52.15-1.fc19.x86_64
(gdb) bt
#0 0x000000000041b3e5 in nmt_page_dsl_constructed (object=0x7fffec0228c0 [NmtPageDsl]) at nmt-page-dsl.c:109
#1 0x0000003e9ac161e3 in g_object_newv (object_type=1, object_type@entry=16203872, n_parameters=n_parameters@entry=2, parameters=parameters@entry=0xf74350)
at gobject.c:1741
#2 0x0000003e9ac16560 in g_object_new_valist (object_type=object_type@entry=16203872, first_property_name=first_property_name@entry=0x42e524 "connection",
var_args=var_args@entry=0x7fffffffcef8) at gobject.c:1830
#3 0x0000003e9ac16894 in g_object_new (object_type=16203872, first_property_name=first_property_name@entry=0x42e524 "connection") at gobject.c:1545
#4 0x000000000041b504 in nmt_page_dsl_new (conn=<optimized out>, deventry=deventry@entry=0x974690 [NmtDeviceEntry]) at nmt-page-dsl.c:47
#5 0x000000000041808e in nmt_editor_constructed (object=<optimized out>) at nmt-editor.c:355
#6 0x0000003e9ac161e3 in g_object_newv (object_type=1, object_type@entry=16174256, n_parameters=n_parameters@entry=4, parameters=parameters@entry=0xf6cec0)
at gobject.c:1741
...
(gdb) p priv
$1 = (NmtPageDslPrivate *) 0x0
(cherry picked from commit cf0a87c5e4)
NMRemoteSettings queues a bunch of async NMRemoteConnection creations,
but wasn't doing anything to ensure that it was still alive when they
completed. Pointed out by Cosimo Cecchi.
https://bugzilla.gnome.org/show_bug.cgi?id=742138
In Python 3, dbus.ByteArray() must be created using a byte string,
while strings obtained via DBUS are unicode strings.
This was wrong in WifiAp.__get_props() which broke the test
test_wifi_ap_added_removed().
File "/usr/lib/python3.3/site-packages/dbus/service.py", line 707, in _message_cb
retval = candidate_method(self, *args, **keywords)
File "./NetworkManager/tools/test-networkmanager-service.py", line 102, in GetAll
return self._get_dbus_properties(iface)
File "./NetworkManager/tools/test-networkmanager-service.py", line 96, in _get_dbus_properties
return self.__dbus_ifaces[iface]()
File "./NetworkManager/tools/test-networkmanager-service.py", line 315, in __get_props
props[PP_SSID] = dbus.ByteArray(self.ssid)
TypeError: string argument without an encoding
https://bugzilla.gnome.org/show_bug.cgi?id=739448
(cherry picked from commit c569fc23bf)
When compiling NetworkManager with --enable-gtk-doc outside the
source tree, the generated documents are slightly different from
those generated in tree. This patch fixes that missed COPYING file in
$(top_builddir) and adds $(top_builddir)/libnm-util to DOC_SOURCE_DIR.
https://bugzilla.gnome.org/show_bug.cgi?id=742139
Signed-off-by: You-Sheng Yang <vicamo@gmail.com>
(cherry picked from commit 738649c1d5)
Otherwise it does not register the "options" property and an assertion fails
when the user prints connection that has DHCPv6 options:
$ LIBNM_GLIB_DEBUG=properties-changed nmcli c show yolo
...
libnm-Message: Property 'options' unhandled.
...
(process:13522): libnm-CRITICAL **: nm_dhcp_config_get_options: assertion 'NM_IS_DHCP_CONFIG (config)' failed
(cherry picked from commit 4615d74de0)
The following must not be allowed:
$ nmcli connection modify apath /org/freedesktop/NetworkManager/ActiveConnection/0
(cherry picked from commit 3cbce6994a)
Previously we would only complete connections given by ID.
The following would work:
$ nmcli connection modify id <ID> <TAB>
$ nmcli connection modify <ID> <TAB>
$ nmcli connection modify uuid <UUID> <TAB>
but the following would not work:
$ nmcli connection modify <UUID> <TAB>
(cherry picked from commit 5ef233936a)
If a device assumes a connection without activating a user-requested or
NM-requested connection, then disable_ipv6 is not touched. When the device
is deactivated, it still isn't touched even though userspace IPv6LL
is enabled. This could lead to an user-requested activation with
IPv6 configuration, but disable_ipv6=1.
Whenever userspace IPv6LL is turned on, we should also set disable_ipv6=0
to ensure IPv6 can function. Userspace IPv6LL will ensure that the
interface does not have an address until the user/connection requests
it, which was the only reason that NM touched disable_ipv6 anyway.
fixes:NetworkManager_Test203_testcase_286589
fixes:NetworkManager_Test204_testcase_286590
When userspace IPv6LL capability is compiled into NetworkManager,
during deactivation NM will toggle userspace IPv6LL in some cases.
This causes link change events in the platform, which show up
in nm-device.c::device_link_changed().
When an EXTERNAL_DOWN interface was activated, the EXTERNAL_DOWN
flag was never cleared even if the device was set IFF_UP or if
a connection was activated via D-Bus (which explicitly sets the
device up).
Second, the device_link_changed() code changed device state
whether or not IFF_UP had actually changed, it simply looked at
the current value.
Together, this caused the first activation of an EXTERNAL_DOWN
device to succeed, but the EXTERNAL_DOWN flag was never cleared
even though the activation set the device IFF_UP. When a second
activation request came in, the device was moved to DISCONNECTED
state and IPv6LL genmode was reset, causing device_link_changed()
to run. Since the device had EXTERNAL_DOWN and IFF_UP were still
set, nm_device_set_unmanaged_flag() code was triggered to clear
EXTERNAL_DOWN, which resulted in a state transition to UNAVAILABLE
with a reason of CONNECTION_ASSUMED. This caused the second
activation request to fail because UNAVAILABLE devices cannot
activate connections by definition.
The fix has three parts:
1) Only change EXTERNAL_DOWN if IFF_UP actually changes, to prevent
spurious changes when something other than IFF_UP changes
2) Only clear EXTERNAL_DOWN when IFF_UP changes while the device
is UNMANAGED, since any state higher than UNMANAGED implies that
either an activation request was received (and thus the device
should be managed) or IFF_UP was set
3) Clear EXTERNAL_DOWN (without triggering state changes) when
any state higher than UNAVAILABLE is entered, since this implies
that a connection is activating or the device is no longer
IFF_UP
fixes:NetworkManager_Test108_testcase_303655
https://bugzilla.gnome.org/show_bug.cgi?id=741742
(cherry picked from commit 711a05965b)
On ppc64, `nm` reports the exported symbols as 'D' instead of 'T'.
This caused `make check` to fail.
"D" The symbol is in the initialized data section.
"T" The symbol is in the text (code) section.
(cherry picked from commit 4838543053)
For IPv4 addresses, the binary representation is in network-order,
contrary to host-order. It's better to choose addresses for testing
that are differently on big and little endian systems.
(cherry picked from commit 1bef194302)
s390 does not enable several device plugins, but ADSL and Wi-Fi
plugins are still build. They must be excluded in the spec file,
otherwise rpmbuild fails.
This partly reverts commit 1f631cd08d.
Checking for unpackaged file(s): /usr/lib/rpm/check-files /builddir/build/BUILDROOT/NetworkManager-1.1.0-11242.9709d009d5.el7.s390x
RPM build errors:
error: Installed (but unpackaged) file(s) found:
/usr/lib64/NetworkManager/libnm-device-plugin-adsl.so
/usr/lib64/NetworkManager/libnm-device-plugin-wifi.so
Installed (but unpackaged) file(s) found:
/usr/lib64/NetworkManager/libnm-device-plugin-adsl.so
/usr/lib64/NetworkManager/libnm-device-plugin-wifi.so
Child returncode was: 1
(cherry picked from commit 2fc37ce895)
On s390/s390x we would disable hardware plugins, especially %{with_bluetooth} and
%{with_wwan}. Depending on that we would set 'BuildRequires: ModemManager-glib-devel'.
This was not corresponding to the '--with-modem-manager-1' configure
option, hence we did not have ModemManager-glib-devel, but
'--with-modem-manager-1=yes'
(cherry picked from commit 6f343b866e)
In the 'configure.ac' script we already detect the git commit id
for the current source version. When creating a tarball, it is also
included inside the generated 'configure' script.
Add the commit id as a static string to nm-utils.c. That way, having
a build of libnm.so or NetworkManager, you can quickly find the
corresponding git commit:
strings src/NetworkManager | grep NM_GIT_SHA
Note that this only works after a new `autogen.sh` run. Only rebuilding
is not enough. Hence, you must rebuild all to ensure that the correct
commit id is embedded.
https://bugzilla.gnome.org/show_bug.cgi?id=741651
(cherry picked from commit 924f7b2064)
Previously, we would only pass one argument @loc to _nm_log()
which was set to G_STRLOC.
That has the disadvantage, that for every logging line the binary
contains an individual string __FILE__:__LINE__.
By splitting up @loc into @file and @line, we reduce the number
of strings in the NetworkManager binary by about 50k.
https://bugzilla.gnome.org/show_bug.cgi?id=741651
(cherry picked from commit e62aa4165f)
#0 0x00007f6c3aed34e9 in g_logv (log_domain=0x7f6c3ea7341c "NetworkManager", log_level=G_LOG_LEVEL_CRITICAL, format=<optimized out>, args=args@entry=0x7fff0a33fb60) at gmessages.c:989
#1 0x00007f6c3aed363f in g_log (log_domain=<optimized out>, log_level=<optimized out>, format=<optimized out>) at gmessages.c:1025
#2 0x00007f6c3e8ead4f in nm_device_get_iface (self=0x0) at devices/nm-device.c:502
#3 0x00007f6c3e904f59 in nm_device_slave_notify_release (self=0x7f6c3fb48e60, reason=NM_DEVICE_STATE_REASON_REMOVED) at devices/nm-device.c:1618
#4 0x00007f6c3e8ed69f in nm_device_release_one_slave (self=0x7f6c3fb22670, slave=0x7f6c3fb48e60, configure=1, reason=NM_DEVICE_STATE_REASON_REMOVED) at devices/nm-device.c:968
#5 0x00007f6c3e904bf7 in slave_state_changed (slave=0x7f6c3fb48e60, slave_new_state=NM_DEVICE_STATE_UNMANAGED, slave_old_state=NM_DEVICE_STATE_ACTIVATED, reason=NM_DEVICE_STATE_REASON_REMOVED, self=0x7f6c3fb22670)
at devices/nm-device.c:1368
#6 0x00007f6c39829d8c in ffi_call_unix64 () at ../src/x86/unix64.S:76
#7 0x00007f6c398296bc in ffi_call (cif=cif@entry=0x7fff0a340070, fn=0x7f6c3e9049d0 <slave_state_changed>, rvalue=0x7fff0a33ffe0, avalue=avalue@entry=0x7fff0a33ff60) at ../src/x86/ffi64.c:522
#8 0x00007f6c3b1bfad8 in g_cclosure_marshal_generic (closure=0x7f6c3fb5c8c0, return_gvalue=0x0, n_param_values=<optimized out>, param_values=<optimized out>, invocation_hint=<optimized out>, marshal_data=0x0) at gclosure.c:1454
#9 0x00007f6c3b1bf298 in g_closure_invoke (closure=0x7f6c3fb5c8c0, return_value=return_value@entry=0x0, n_param_values=4, param_values=param_values@entry=0x7fff0a340270, invocation_hint=invocation_hint@entry=0x7fff0a340210)
at gclosure.c:777
#10 0x00007f6c3b1d135d in signal_emit_unlocked_R (node=node@entry=0x7f6c3faf5d10, detail=detail@entry=0, instance=instance@entry=0x7f6c3fb48e60, emission_return=emission_return@entry=0x0,
instance_and_params=instance_and_params@entry=0x7fff0a340270) at gsignal.c:3586
#11 0x00007f6c3b1d90f2 in g_signal_emit_valist (instance=instance@entry=0x7f6c3fb48e60, signal_id=signal_id@entry=64, detail=detail@entry=0, var_args=var_args@entry=0x7fff0a3404a8) at gsignal.c:3330
#12 0x00007f6c3b1d98f8 in g_signal_emit_by_name (instance=0x7f6c3fb48e60, detailed_signal=0x7f6c3ea70f83 "state-changed") at gsignal.c:3426
#13 0x00007f6c3e8f894f in _set_state_full (self=0x7f6c3fb48e60, state=NM_DEVICE_STATE_UNMANAGED, reason=NM_DEVICE_STATE_REASON_REMOVED, quitting=0) at devices/nm-device.c:7486
#14 0x00007f6c3e8f0706 in nm_device_state_changed (self=0x7f6c3fb48e60, state=NM_DEVICE_STATE_UNMANAGED, reason=NM_DEVICE_STATE_REASON_REMOVED) at devices/nm-device.c:7623
#15 0x00007f6c3e8f808b in nm_device_set_unmanaged (self=0x7f6c3fb48e60, flag=NM_UNMANAGED_INTERNAL, unmanaged=1, reason=NM_DEVICE_STATE_REASON_REMOVED) at devices/nm-device.c:6652
#16 0x00007f6c3e9943d0 in remove_device (manager=0x7f6c3fb20150, device=0x7f6c3fb48e60, quitting=0, allow_unmanage=1) at nm-manager.c:752
#17 0x00007f6c3e995c29 in platform_link_cb (platform=0x7f6c3fa7a870, ifindex=73, plink=0x7fff0a341260, change_type=NM_PLATFORM_SIGNAL_REMOVED, reason=NM_PLATFORM_REASON_EXTERNAL, user_data=0x7f6c3fb20150) at nm-manager.c:2182
#18 0x00007f6c39829d8c in ffi_call_unix64 () at ../src/x86/unix64.S:76
#19 0x00007f6c398296bc in ffi_call (cif=cif@entry=0x7fff0a340bc0, fn=0x7f6c3e995b60 <platform_link_cb>, rvalue=0x7fff0a340b30, avalue=avalue@entry=0x7fff0a340ab0) at ../src/x86/ffi64.c:522
#20 0x00007f6c3b1bfad8 in g_cclosure_marshal_generic (closure=0x7f6c3fb14cf0, return_gvalue=0x0, n_param_values=<optimized out>, param_values=<optimized out>, invocation_hint=<optimized out>, marshal_data=0x0) at gclosure.c:1454
#21 0x00007f6c3b1bf298 in g_closure_invoke (closure=0x7f6c3fb14cf0, return_value=return_value@entry=0x0, n_param_values=5, param_values=param_values@entry=0x7fff0a340dc0, invocation_hint=invocation_hint@entry=0x7fff0a340d60)
at gclosure.c:777
#22 0x00007f6c3b1d135d in signal_emit_unlocked_R (node=node@entry=0x7f6c3fa76f00, detail=detail@entry=0, instance=instance@entry=0x7f6c3fa7a870, emission_return=emission_return@entry=0x0,
instance_and_params=instance_and_params@entry=0x7fff0a340dc0) at gsignal.c:3586
#23 0x00007f6c3b1d90f2 in g_signal_emit_valist (instance=instance@entry=0x7f6c3fa7a870, signal_id=signal_id@entry=2, detail=detail@entry=0, var_args=var_args@entry=0x7fff0a341018) at gsignal.c:3330
#24 0x00007f6c3b1d98f8 in g_signal_emit_by_name (instance=0x7f6c3fa7a870, detailed_signal=0x7f6c3ea5f1fa "link-changed") at gsignal.c:3426
#25 0x00007f6c3e92412a in announce_object (platform=0x7f6c3fa7a870, object=0x7f6c3fbb6fd0, change_type=NM_PLATFORM_SIGNAL_REMOVED, reason=NM_PLATFORM_REASON_EXTERNAL) at platform/nm-linux-platform.c:1625
#26 0x00007f6c3e92b0f9 in event_notification (msg=0x7f6c3fa946f0, user_data=0x7f6c3fa7a870) at platform/nm-linux-platform.c:1986
#27 0x00007f6c3c35812f in nl_cb_call (msg=<optimized out>, type=<optimized out>, cb=<optimized out>) at ../include/netlink-private/netlink.h:141
#28 recvmsgs (cb=0x7f6c3fa7a620, sk=0x7f6c3fa7a710) at nl.c:952
#29 nl_recvmsgs_report (sk=0x7f6c3fa7a710, cb=0x7f6c3fa7a620) at nl.c:1003
#30 0x00007f6c3c3584f9 in nl_recvmsgs (sk=<optimized out>, cb=<optimized out>) at nl.c:1027
#31 0x00007f6c3e929dca in event_handler (channel=0x7f6c3fa78810, io_condition=G_IO_IN, user_data=0x7f6c3fa7a870) at platform/nm-linux-platform.c:4127
#32 0x00007f6c3aecc2a6 in g_main_dispatch (context=0x7f6c3fa68490) at gmain.c:3066
#33 g_main_context_dispatch (context=context@entry=0x7f6c3fa68490) at gmain.c:3642
#34 0x00007f6c3aecc628 in g_main_context_iterate (context=0x7f6c3fa68490, block=block@entry=1, dispatch=dispatch@entry=1, self=<optimized out>) at gmain.c:3713
#35 0x00007f6c3aecca3a in g_main_loop_run (loop=0x7f6c3fa68550) at gmain.c:3907
#36 0x00007f6c3e8e9fff in main (argc=1, argv=0x7fff0a341c88) at main.c:483
https://bugzilla.gnome.org/show_bug.cgi?id=741651
(cherry picked from commit 3ea9169c81)
