Since we don't get netlink notifications when the MPTCP endpoints
change, we don't cache them. And since we don't cache them,
there is less need to mark whether they were received from kernel
or created internally.
It's not very clear what the best identity is.
For example, in kernel you cannot add two MPTCP addresses that only differ by
ifindex. Thus (as far as kernel is concerned), the ifindex is not part of the
identity. Still, as we will have an interface centric view, this will be
useful for us.
On the other hand, to kernel is the "id" a second primary key, along
side "addr:port". However, to us it's not useful to consider that as
part of nmp_object_id_equal(), because usually kernel will pick an "id"
for us, and when we track objects that we are about to add, they don't
have an "id" yet.
So, adjust nmp_object_id_equal(). However -- somewhat unusual -- let it
deviate from kernel's understanding of what defines an MPTCP address.
For enum type properties, we support to specify a list of
aliases.
- the getter uses a separate list from the setter. The idea
is that some of these aliases are only for showing, but not
for setting. Add a special marker GOBJECT_ENUM_VALUE_INFOS_GET_FROM_SETTER
which indicates that the value information from the setter
should also be used by the getter.
- extend _values_fcn_gobject_enum() to also return the nicks from
the setter for bash completion. After all, they can be set too.
When only one of those connection.{lldp,mdns,llmnr,dns-over-tls}
settings changes, we still need to do a full restart of the IP
configuration to reapply the changes.
Fixes: 58287cbcc0 ('core: rework IP configuration in NetworkManager using layer 3 configuration')
CentOS 7's headers don't yet contains IFLA_BOND_PEER_NOTIF_DELAY.
Define it ourselves.
Fixes: f900f7bc2c ('platform: add netlink support for bond link')
Leave a hint about core-dumps.
Also, now we have `contrib/fedora/rpm/configure-for-system.sh` script,
which can configure the build in a way similar to what we get
when doing an RPM build.
That means, inside "contrib/scripts/nm-in-container.sh" we
can just type `make install`, and it will replace the pre-installed
NetworkManager.
The main advantage is that it becomes convenient to run NetworkManager
as a systemd service. Previously, the suggested was to to install
NetworkManager inside another prefix, and run it in the terminal.
Running NetworkManager as systemd service is also necessary for NM-ci,
which restarts the NetworkManager service, and you couldn't run a test,
if you just started NetworkManager in a terminal.
Previously, you had to build a complete RPM, which takes a lot of time.
Yes, it's a large dependency. But on your outer host you
probably configured NetworkManager with QT enabled (for the
example scripts). We want to compile the same work tree inside
the container. So install qt-devel.
This will use the same option as when we do an RPM build.
The purpose is that you could type `make install` with such
a build, and it would replace the files that you'd get by installing
the NetworkManager RPMs.
Of course, you would not want to do that on your work station, but it
will be useful in a container, where we don't mind messing up the
installation.
autotools accepts both --with-$OPTION/--without-$OPTION and
--with-$OPTION=yes|no. Consistently use the latter.
The advantage is that whether it's enabled becomes an argument, so in a
script you could do
"--with-$OPTION=$VALUE"
Same for enable/disable option.
_host_id_read() is the only place where we really care to have good
random numbers, because that is the secret key that we persist to disk.
Previously, we tried only nm_random_get_bytes_full(), which is a best
effort to get strong random numbers. If it fails to generate those,
it would simply remember the generated key in memory and proceed, but not
persist it to disk.
nm_random_get_bytes_full() does not block waiting for good numbers.
Change that. Now, first call nm_random_get_crypto_bytes(), which would
block and try hard to get good random numbers. Only if that fails,
fallback to nm_random_get_bytes_full() as before. The difference is of
course only in early boot, when we might not yet have entropy. In that
case, I think it's better for NetworkManager to block.
Heavily inspired by systemd ([1]).
We now also have nm_random_get_bytes{,_full}() and
nm_random_get_crypto_bytes(), like systemd's random_bytes()
and crypto_random_bytes(), respectively.
Differences:
- instead of systemd's random_bytes(), our nm_random_get_bytes_full()
also estimates whether the output is of high quality. The caller
may find that interesting. Due to that, we will first try to call
getrandom(GRND_NONBLOCK) before getrandom(GRND_INSECURE). That is
reversed from systemd's random_bytes(), because we want to find
out whether we can get good random numbers. In most cases, kernel
should have entropy already, and it makes no difference.
Otherwise, heavily rework the code. It should be easy to understand
and correct.
There is also a major bugfix here. Previously, if getrandom() failed
with ENOSYS and we fell back to /dev/urandom, we would assume that we
have high quality random numbers. That assumption is not warranted.
Now instead poll on /dev/random to find out.
[1] a268e7f402/src/basic/random-util.c (L81)
sysfs is deprecated and kernel people will not add new bond options to
sysfs. Netlink is a stable API and therefore is the right method to
communicate with kernel in order to set the link options.
Add parentheses around macro arguments.
Yes, it's not technically necessary when using macro arguments are
surrounded by commas. Still do it, for consistency and for not having
special exceptions to the rule.
The devices generally need to be IFF_UP and wait a little before the
carrier detection is reliable. Some devices, actually need to wait
more than a little -- r8169 needs up to 5 seconds.
For this reason, we delay startup complete while the carrier is down
after we bring the device up. We do this so that we don't reject
activations due to carrier down until we're sure it's really down.
This works well as long as it's us who brought the device up.
If we're restarting the daemon, the device is going to be already up
when we start up the daemon for the second time. There's, however, a
slim chance that the device was brought down and up very shortly before
the restart and therefore the carrier reporting is still not reliable.
As a matter of fact, we bring the devices down and back up on some
occassions, such as when enslaving to a team device.
Therefore, the following events in quick succession cause trouble:
# nmcli con up team-slave-eth0
[20099.205355] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
[20099.365641] nm-team: Port device eth0 added
[20099.370728] r8169 0000:03:00.0 eth0: Link is Down
[20099.436631] nm-team: Port device eth0 removed
[20099.463422] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
[20099.628505] r8169 0000:03:00.0 eth0: Link is Down
[20099.669425] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
[20099.833457] r8169 0000:03:00.0 eth0: Link is Down
[20099.838471] nm-team: Port device eth0 added
The device has been brought down, enslaved and brought up.
"Link is Down" indicates carrier not being detected.
Connection successfully activated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/7)
# systemctl restart NetworkManager
Now NM sees the device being up, but carrier down.
# nmcli con up testeth0
Error: Connection activation failed: No suitable device found for this connection (...).
Activation failed, because eth0 carrier still appears down.
# [20102.943464] r8169 0000:03:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
Now it's up, but the party is already over. Shiet.
Let's wait whenever the device reaches unavailable state, whether we
bring it up at that point or not.
Fixes-test: @restart_L2_only_lacp
https://bugzilla.redhat.com/show_bug.cgi?id=2092361https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1316
The test bcond is used to make test suite failure terminate the %check
phase. That should generally be done for distro builds.
What the distro builds shouldn't do is terminate the build on compiler
warnings, because they're fairly likely to appear on toolchain updates
without indicating actual bugs.
However, currently that's precisely what do we do now.
Let's use -Werror on debug builds instead. They are intentionally made
more prone to fail (e.g. trip more runtime assertions) because failures
can be more rapidly addressed and don't affect distro builds.
nm_utils_random_bytes() is supposed to give us good random number from
kernel. It guarantees to always provide some bytes, and it has a
boolean return value that estimates whether the bytes are good
randomness. In practice, most callers ignore that return value, because
what would they do about it anyway?
Of course, we want to primarily use getrandom() (or "/dev/urandom"). But
if we fail to get random bytes from them, we have a fallback path that
tries to generate "random" bytes.
It does so, by initializing a global seed from various sources, and keep
sha256 hashing the buffer in a loop. That's certainly not efficient nor
elegant, but we already are in a fallback path.
Still, we can do slightly better. Instead of just using the global state
and keep updating it (entirely deterministically), every time also mix in
the results from getrandom() and a current timestamp. The idea is that if you
have a virtual machine that gets cloned, we don't want that our global
state keeps giving the same random numbers. In particular, because
getrandom() might handle that case, even if it doesn't have good
entropy.
