- Only consider preferred context of "internet" type. There can be
multiple preferred contexts of multiple types, and we care about
"internet" type only.
- Don't check for "internet+mms" type. It turns out that "internet+mms"
isn't a thing in oFono, and is used to represent "internet" context
with MMSC in the lomiri-system-setting's UI only.
Fixes: 9fc72bf75d ('wwan/ofono: create connections based on available contexts')
Bug-UBports: https://gitlab.com/ubports/development/core/packaging/network-manager/-/issues/3
G_TYPE_CHECK_INSTANCE_CAST() can trigger a "-Wcast-align":
src/core/devices/nm-device-macvlan.c: In function 'parent_changed_notify':
/usr/include/glib-2.0/gobject/gtype.h:2421:42: error: cast increases required alignment of target type [-Werror=cast-align]
2421 | # define _G_TYPE_CIC(ip, gt, ct) ((ct*) ip)
| ^
/usr/include/glib-2.0/gobject/gtype.h:501:66: note: in expansion of macro '_G_TYPE_CIC'
501 | #define G_TYPE_CHECK_INSTANCE_CAST(instance, g_type, c_type) (_G_TYPE_CIC ((instance), (g_type), c_type))
| ^~~~~~~~~~~
src/core/devices/nm-device-macvlan.h:13:6: note: in expansion of macro 'G_TYPE_CHECK_INSTANCE_CAST'
13 | (G_TYPE_CHECK_INSTANCE_CAST((obj), NM_TYPE_DEVICE_MACVLAN, NMDeviceMacvlan))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Avoid that by using _NM_G_TYPE_CHECK_INSTANCE_CAST().
This can only be done for our internal usages. The public headers
of libnm are not changed.
These are helpers for GDBusProxy. I think we should avoid GDBusProxy where possible,
and these functions too. Give the function a more specific name to show that this
is only for the proxy.
These are just general purpose D-Bus utils, based on glib and GDBus.
They fit perfectly to libnm-glib-aux. Move the code.
Also, there is already the file "src/core/nm-dbus-utils.c", having two
files with the same name on our source tree is just confusing.
It's possible that the modem is enabled outside of NM. If not
re-check, device could stay disabled throughout until something else
about the modem changes again.
If modem is not at least "registered", a connection is not happening, which
means IP settings change is probably not interesting. Avoid trying to
parse it, so that we don't trigger connection failure when there isn't
one.
Downstream patches for this does it through NMSettings plugin, however
settings plugin are hard to maintain and complicated architecture wise
as well.
So directly create a connection profiles in-memory from the
nm-modem-ofono side. Those profiles are created in /run, and are not
added as a persistent connection, because connection state quite depends
on the state of ofono
This also allows us to drop the hack where we are keeping track of
active context/APN through the connection name, i.e if connection name
was in /imsi/context1 format, it was used. Instead now, Connection name
is actual context name which is user friendly ("Vodafone Connect" e.g.
in my case), and details like IMSI and context are stored internally.
[ratchanan@ubports.com:
- forward-ported to main branch.
- fold "wwan/ofono: handle context removal" into this commit.
- track the "preferred"-ness of the context and react accordingly.
Creates proxies for all retrived contexts to listen to changes.
While at it, also track name and type.
- use, instead of ignore, internet APN. Also support internet+mms APN.
- correct priv->contexts' value destroy function.
- factor out UUID generation as a helper function.
- handle the case where context dictionary is missing required keys.
- simplify nm_ofono_connection_new's arguments and rename to
add_or_update_connection. Makes it handle the case where the
connection already exists.
- also simplify other functions' arguments.
- clean up code and comments. Fix memory problems. Get rid of warnings.
]
Co-authored-by: Ratchanan Srirattanamet <ratchanan@ubports.com>
The DNS name can now also contain the DoT server name. It's not longer a
binary IP address only.
Extend NML3ConfigData to account for that. To track the additional
data, use the string representation. The alternative to have a separate
type that contains the parsed information would be cumbersome too.
These variants provide additional nm_assert() checks, and are thus
preferable.
Note that we cannot just blindly replace &g_array_index() with
&nm_g_array_index(), because the latter would not allow getting a
pointer at index [arr->len]. That might be a valid (though uncommon)
usecase. The correct replacement of &g_array_index() is thus
nm_g_array_index_p().
I checked the code manually and replaced uses of nm_g_array_index_p()
with &nm_g_array_index(), if that was a safe thing to do. The latter
seems preferable, because it is familar to &g_array_index().
- name things related to `in_addr_t`, `struct in6_addr`, `NMIPAddr` as
`nm_ip4_addr_*()`, `nm_ip6_addr_*()`, `nm_ip_addr_*()`, respectively.
- we have a wrapper `nm_inet_ntop()` for `inet_ntop()`. This name
of our wrapper is chosen to be familiar with the libc underlying
function. With this, also name functions that are about string
representations of addresses `nm_inet_*()`, `nm_inet4_*()`,
`nm_inet6_*()`. For example, `nm_inet_parse_str()`,
`nm_inet_is_normalized()`.
<<<<
R() {
git grep -l "$1" | xargs sed -i "s/\<$1\>/$2/g"
}
R NM_CMP_DIRECT_IN4ADDR_SAME_PREFIX NM_CMP_DIRECT_IP4_ADDR_SAME_PREFIX
R NM_CMP_DIRECT_IN6ADDR_SAME_PREFIX NM_CMP_DIRECT_IP6_ADDR_SAME_PREFIX
R NM_UTILS_INET_ADDRSTRLEN NM_INET_ADDRSTRLEN
R _nm_utils_inet4_ntop nm_inet4_ntop
R _nm_utils_inet6_ntop nm_inet6_ntop
R _nm_utils_ip4_get_default_prefix nm_ip4_addr_get_default_prefix
R _nm_utils_ip4_get_default_prefix0 nm_ip4_addr_get_default_prefix0
R _nm_utils_ip4_netmask_to_prefix nm_ip4_addr_netmask_to_prefix
R _nm_utils_ip4_prefix_to_netmask nm_ip4_addr_netmask_from_prefix
R nm_utils_inet4_ntop_dup nm_inet4_ntop_dup
R nm_utils_inet6_ntop_dup nm_inet6_ntop_dup
R nm_utils_inet_ntop nm_inet_ntop
R nm_utils_inet_ntop_dup nm_inet_ntop_dup
R nm_utils_ip4_address_clear_host_address nm_ip4_addr_clear_host_address
R nm_utils_ip4_address_is_link_local nm_ip4_addr_is_link_local
R nm_utils_ip4_address_is_loopback nm_ip4_addr_is_loopback
R nm_utils_ip4_address_is_zeronet nm_ip4_addr_is_zeronet
R nm_utils_ip4_address_same_prefix nm_ip4_addr_same_prefix
R nm_utils_ip4_address_same_prefix_cmp nm_ip4_addr_same_prefix_cmp
R nm_utils_ip6_address_clear_host_address nm_ip6_addr_clear_host_address
R nm_utils_ip6_address_same_prefix nm_ip6_addr_same_prefix
R nm_utils_ip6_address_same_prefix_cmp nm_ip6_addr_same_prefix_cmp
R nm_utils_ip6_is_ula nm_ip6_addr_is_ula
R nm_utils_ip_address_same_prefix nm_ip_addr_same_prefix
R nm_utils_ip_address_same_prefix_cmp nm_ip_addr_same_prefix_cmp
R nm_utils_ip_is_site_local nm_ip_addr_is_site_local
R nm_utils_ipaddr_is_normalized nm_inet_is_normalized
R nm_utils_ipaddr_is_valid nm_inet_is_valid
R nm_utils_ipx_address_clear_host_address nm_ip_addr_clear_host_address
R nm_utils_parse_inaddr nm_inet_parse_str
R nm_utils_parse_inaddr_bin nm_inet_parse_bin
R nm_utils_parse_inaddr_bin_full nm_inet_parse_bin_full
R nm_utils_parse_inaddr_prefix nm_inet_parse_with_prefix_str
R nm_utils_parse_inaddr_prefix_bin nm_inet_parse_with_prefix_bin
R test_nm_utils_ip6_address_same_prefix test_nm_ip_addr_same_prefix
./contrib/scripts/nm-code-format.sh -F
Before 1.36, manual addresses from the profile were assigned to the
interface; restore that behavior.
The manual IP configuration also contains the DNS priority from the
profile; so this change ensures that the merged l3cd has a DNS
priority and that dynamically discovered DNS servers are not ignored
by the DNS manager.
Fixes: 58287cbcc0 ('core: rework IP configuration in NetworkManager using layer 3 configuration')
We have two variants of the function: nm_utils_ip4_netmask_to_prefix()
and _nm_utils_ip4_netmask_to_prefix(). The former only exists because it
is public API in libnm. Internally, only use the latter.
For devices that configure IP by themselves (by returning
"->ready_for_ip_config() = TRUE" and implementing
->act_stage3_ip_config()), we skip manual configuration. Currently,
manual configuration is the only one that sets flag HAS_DNS_PRIORITY
into the resulting l3cd.
So, the merged l3cd for such devices misses a dns-priority and is
ignored by the DNS manager.
Explicitly initialize the priority to 0; in this way, the default
value for the device will be set in the final l3cd during the merge.
Fixes: 58287cbcc0 ('core: rework IP configuration in NetworkManager using layer 3 configuration')
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/issues/931
Names in header files should have an "nm" prefix. We do that pretty
consistently. Fix the offenders RfKillState and RfKillType.
Also, rename the RfKillState enums to follow the type name. For example,
NM_RFKILL_STATE_SOFT_BLOCKED instead of RFKILL_SOFT_BLOCKED.
Also, when we camel-case a typedef (NMRfKillState) we would want that
the lower-case names use underscore between the words. So it should be
`nm_rf_kill_state_to_string()`. But that looks awkward. So the right solution
here is to also rename "RfKill" to "Rfkill". That make is consistent
with the spelling of the existing `NMRfkillManager` type and the
`nm-rfkill-manager.h` file.
GObject Properties are flexible and powerful. In practice, NMDevicePrivate.rfkill_type
was only set once via the construct-only property NM_DEVICE_RFKILL_TYPE.
Which in turn was always set to a well-known value, only depending on the device
type.
We don't need this flexibility. The rfkill-type only depends on the
device type and doesn't change. Replace the property by a field in
NMDeviceClass.
For one, construct properties have an overhead, that the property setter is
called whenever we construct a NMDevice. But the real reason for this
change, is that a property give a notion as this could change during the
lifetime of a NMDevice (which it in fact did not, being construct-only).
Or that the type depends on something more complex, when instead it only
depends on the device type. A non-mutated class property is simpler,
because it's clear that it does not depend on the device instance,
only on the type/class.
Also, `git grep -w rfkill_type` now nicely shows the (few) references to
this variable and its easier to understand.
The properties NM_DEVICE_MODEM_CAPABILITIES and
NM_DEVICE_MODEM_CURRENT_CAPABILITIES are uint, with a range from zero to
G_MAXUINT32.
nm_modem_get_capabilities() passes the "untrusted" flags from
ModemManager. Ensure that they fit into 32 bit, and don't cause an
assertion failure due to the range check.
Yes, in practice, on all platforms where we build (known to me), guint
is always the same as guint32. So this has little effect.
Also, cast to guint. Previously, this was just a C enum
NMDeviceModemCapabilities, which theoretically has implementation
defined sizes. Yes, in practice, they too are of size guint, and this
was not an actual bug. But be specific about converting between
different integer types.
Macros should (where possible and sensible) behave function-like.
That means for example, that they evaluate arguments only once, and
use parentheses around code that expands, so that unexpected uses
work correctly. The parentheses was missing.
Instead, just use the NM_FLAGS_ANY() macro which gets this right.
Currently, ip4 new config signal is being emitted twice, due
to the lack of a barrier to a possible situation. This
commit includes this.
This fixes a crash on NMCI tests due to an assertion failure,
now it will not go ahead in the function anymore if it is under the
undesired conditions.
The backtrace of the crashes can be found at
https://bugzilla.redhat.com/show_bug.cgi?id=2028385
We use clang-format for automatic formatting of our source files.
Since clang-format is actively maintained software, the actual
formatting depends on the used version of clang-format. That is
unfortunate and painful, but really unavoidable unless clang-format
would be strictly bug-compatible.
So the version that we must use is from the current Fedora release, which
is also tested by our gitlab-ci. Previously, we were using Fedora 34 with
clang-tools-extra-12.0.1-1.fc34.x86_64.
As Fedora 35 comes along, we need to update our formatting as Fedora 35
comes with version "13.0.0~rc1-1.fc35".
An alternative would be to freeze on version 12, but that has different
problems (like, it's cumbersome to rebuild clang 12 on Fedora 35 and it
would be cumbersome for our developers which are on Fedora 35 to use a
clang that they cannot easily install).
The (differently painful) solution is to reformat from time to time, as we
switch to a new Fedora (and thus clang) version.
Usually we would expect that such a reformatting brings minor changes.
But this time, the changes are huge. That is mentioned in the release
notes [1] as
Makes PointerAligment: Right working with AlignConsecutiveDeclarations. (Fixes https://llvm.org/PR27353)
[1] https://releases.llvm.org/13.0.0/tools/clang/docs/ReleaseNotes.html#clang-format
Completely rework IP configuration in the daemon. Use NML3Cfg as layer 3
manager for the IP configuration of an interface. Use NML3ConfigData as
pieces of configuration that the various components collect and
configure. NMDevice is managing most of the IP configuration at a higher
level, that is, it starts DHCP and other IP methods. Rework the state
handling there.
This is a huge rework of how NetworkManager daemon handles IP
configuration. Some fallout is to be expected.
It appears the patch deletes many lines of code. That is not accurate, because
you also have to count the files `src/core/nm-l3*`, which were unused previously.
Co-authored-by: Beniamino Galvani <bgalvani@redhat.com>
Drop a workaround added by commit a8ca7f537d ('ppp: work around PPP
bug that returns bogus nameservers'), in 2009.
Also drop the second workaround (`if (!num ...`), which was introduced
by commit 294a5e3153 ('modem: substitute known-good nameservers if PPP
doesn't return any (lp:434477)').
I hope this doesn't break something, but it really doesn't seem right in
2021.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/988
The idea, that callers to nm_modem_stage3_ip4_config_start() pass
a NMDeviceClass, which then might invoke a virtual function on
the class is really bad.
nm_modem_stage3_ip4_config_start() should indicate what the caller
should do.
The main problem is, that act_stage3_ip_config_start() is not supposed
to be called by anybody except NMDevice. It's an internal hook, not for
NMModem's concern.
Use `_nm_connection_ensure_setting()` to eliminate the
duplicated codes. This function will retrieve the specific setting from
connection, if not found, create new one and attach to the connection.
Signed-off-by: Gris Ge <fge@redhat.com>
NMDeviceModem has priv->modem set from construction to dispose, and
the NM_MODEM_IP4_CONFIG_RESULT/NM_MODEM_IP6_CONFIG_RESULT signals
connected all the time.
On the other hand, NMModem may hook up to NMPPPManager's
NM_PPP_MANAGER_SIGNAL_IP{4,6}_CONFIG signals, which emit the
config-results signals. And PPP manager emits the config signals
from impl_ppp_manager_set_ip{4,6}_config().
That means, at any moment can be a D-Bus calls, which leads to emitting
those signals and calling into modem_ip4_config_result() and
modem_ip6_config_result().
At least, it's not clear from review what would prevent that from
happening. If you cannot easily verify that certain conditions are
satisfied, then this is not the place to assert, but to handle the case
as something that can happen regularly.
Handle signals in the unexpected state by ignoring them.
https://bugzilla.redhat.com/show_bug.cgi?id=1916192https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/926
