When @src didn't have a gateway and @dst did, the function left @dst's
gateway set to 0.0.0.0; fix this and unset the gateway in such case.
Fixes: 063677101a
(cherry picked from commit d1a776bff9)
This gives us a way to externally configure the logging level like:
NMTST_DEBUG=log-level=TRACE ./src/platform/tests/monitor
(cherry picked from commit ca8e40e1dc)
When you want to run valgrind for a test, you either had to
invoke valgrind manually, or doing it via `make check` (provided
you configured --with-valgrind).
Make it more convenient to run valgrind by passing the test
to run to the "run-test-valgrind.sh" wrapper.
This also allows to pass -p/-s to the test, which is not possible
during `make check` because selecting tests conflicts with "--tap".
The following invocations are largely equivalent and work as
expected:
$ ./tools/run-test-valgrind.sh ./src/platform/tests/test-link-linux -p /link/software/detect/vlan
$ NMTST_DEBUG=no-debug,p=/link/software/detect/vlan ./tools/run-test-valgrind.sh ./src/platform/tests/test-link-linux
(cherry picked from commit 4dacf0b1ad)
For tests based on glib's test framework, you can select which tests to
run by passing -p/-s on the command line.
Usually, we want to invoke our tests via `make check` which conveniently
calls valgrind (run-test-valgrind.sh) or spawns a private D-Bus server
(libnm-test-launch.sh, libnm-glib-test-launch.sh). At that point, it is
not directly possible to specify command line arguments for the tests,
which is why it is convenient to specify arguments via $NMTST_DEBUG
environment variable.
Parse "p" and "s" arguments from $NMTST_DEBUG and pass them to g_test_init()
to select which tests to run.
NMTST_DEBUG=p=/core/general/test_setting_ip4_changed_signal ./libnm-core/tests/test-general
However, there is a problem here: in gtestutils, -p/-s conflicts with --tap,
which is how our Makefile invokes the tests. Thus the new options explicitly
don't work when being called during `make check`. Which makes this much
less useful. I only noticed that afterwards, so still keep the patch
because it might still be convenient during developing tests to set the
environment variable once, and then repeatedly spawn the tests, without
specifying -p/-s.
(cherry picked from commit 73cb579108)
When deconfiguring a device, we must also explicitly clear the
default-route -- unless the device was assumed.
This can easily reproduced by disconnecting the cable from the
wired connection that has the default rout. Prevously, the
default-route was not cleared and lingered around.
https://bugzilla.gnome.org/show_bug.cgi?id=757587
(cherry picked from commit c2831875e3)
We already have the macros _LOGD(), _LOGI(), etc. to provide context sensitive
logging (such as printing the object pointer as prefix).
In some implementations, we would like to have a second set of logging
macros, that shall be used differently. For example, use the default
_LOGD() for messages that are explicitly issued by one objects, and use
_LOG2D() in a static context when no object is around.
The "_LOG2" prefix is not great from a naming point of view. However, it is
meant to be a second (alternative) set of logging macros with the same
usage pattern as the _LOGD() macros.
(cherry picked from commit ed5ebf7e74)
Even if update_seen_bssids_cache() is called by set_current_ap() it did not
really update the cache because it was called in NM_DEVICE_STATE_PREPARE state.
So the cache was only updated by periodic_update() when the connection roamed
to another AP.
Fixes: 1283816b41https://bugzilla.redhat.com/show_bug.cgi?id=1094298
(cherry picked from commit d4ebffcfb9)
msgmerge complains with
"warning: internationalized messages should not contain the '\r' escape sequence"
Found by Anders Jonsson <anders.jonsson@norsjovallen.se>
https://bugzilla.gnome.org/show_bug.cgi?id=758102
(cherry picked from commit 2c8c4ce2e4)
If __x is signed and its value is the minimum allowed for the type,
(__x - 1) causes a signed overflow, which has an undefined
behavior. Compiling with -fsanitize=undefined produces the warnings:
test-general.c:4499:619: runtime error: signed integer overflow: -2147483648 - 1 cannot be represented in type 'int'
test-general.c:4506:681: runtime error: signed integer overflow: -2147483648 - 1 cannot be represented in type 'TEST_IS_POWER_OF_TWP_ENUM_SIGNED'
test-general.c:4501:619: runtime error: signed integer overflow: -9223372036854775808 - 1 cannot be represented in type 'long int'
test-general.c:4509:691: runtime error: signed integer overflow: -9223372036854775808 - 1 cannot be represented in type 'TEST_IS_POWER_OF_TWP_ENUM_UNSIGNED_64'
Change the order of expressions to avoid this.
Fixes: 0a3c1f5774
(cherry picked from commit bc9d034775)
There's a race between when link_timeout_cb() runs and removes priv->current_ap,
and the supplicant removing priv->current_ap and finding it again. The race appears
to be:
* connected to AP, so ssid_found = TRUE
* AP powers off
* supplicant state change to DISCONNECTED
* supplicant_iface_state_cb() schedules link_timeout_cb() and sets ssid_found=false
* AP powers on
* Supplicant announces that it found the AP again
* Supplicant either doesn't try to connect to AP, or doesn't get far enough before:
* NM runs link_timeout_cb(), removes AP from scan list
* nothing happens because the AP isn't in the scan list
We can use WPAS_REMOVED_TAG in link_timeout_cb() to figure out whether the
supplicant knows about the AP or not. If it does know about the AP, then
the AP shouldn't be removed from NM's scan list.
https://bugzilla.gnome.org/show_bug.cgi?id=733105
Since commit ebe3320e62,
nm_ap_new_from_properties() will always return an
AP with BSSID set. Restore the assertion during
try_fill_ssid_for_hidden_ap().
This reverts commit e0e043ef39.
(cherry picked from commit d5373959f9)
Differently from GLib timeout sources, systemd ones are always
one-shot and therefore we must return G_SOURCE_REMOVE in the callback,
otherwise the timer will be scheduled again.
In most cases things were working correctly because usually the
callback also unreferences the source event, but when this doesn't
happen the timer will trigger multiple times as reported in the bug
below.
https://bugzilla.redhat.com/show_bug.cgi?id=1278506
Fixes: 1b1222ffdf
(cherry picked from commit a74e98bfc6)
gi now emits a warning when not loading a specific library
version [1]:
./generate-setting-docs.py:21: PyGIWarning: NM was imported without specifying a version first. Use gi.require_version(NM, 1.0) before import to ensure that the right version gets loaded.
from gi.repository import NM, GObject
Seems require_version() is reasonably old to just always use it without
breaking on older versions [2].
[1] Related: https://bugzilla.gnome.org/show_bug.cgi?id=727379
[2] https://git.gnome.org/browse/pygobject/commit/?id=76758efb6579752237a0dc4d56cf9518de6c6e55
(cherry picked from commit 8d1233e67e)
The autoconf macro for GIR passes $CFLAGS to g-ir-scanner.
g-ir-scanner extends those flags with the system-default which
includes -D_FORTIFY_SOURCE=2. Probably it should not do that,
but if you disable optimization, this results in a compler warning
in "/usr/include/features.h" [1]
export CFLAGS='-O0'
# Happens both with clang or gcc.
#export CC=clang
git clean -fdx
./autogen.sh
make
Work around that by injecting -Wno-error to $CFLAGS when invoking
g-ir-scanner.
[1] Related: https://sourceware.org/bugzilla/show_bug.cgi?id=13979
Related: https://bugzilla.gnome.org/show_bug.cgi?id=757934
(cherry picked from commit f6272144e9)
$ nmcli dev wifi connect 00:22:6B:EB:1D:CA hidden yes
Warning: '00:22:6B:EB:1D:CA' should be SSID for hidden APs; but it looks like a BSSID.
Error: Failed to add/activate new connection: 802-11-wireless.ssid: connection does not match access point
(cherry picked from commit 0dc48370b4)
