"assuming" means to gracefully take over after restart. The result
should be a working configuration with a device fully managed by
NetworkManager.
If we are assuming, and the interface is down we still want to set it
up.
I don't think this warrants a warning. It's important to keep the number
of warnings and errors in the log low, and only print such messages if
there is really something that requires attention by the user. If you
run without /etc/network/interfaces, then this is pretty much expected
and the warning isn't going to tell you anything useful.
NML3Cfg tracks the state of each object (that is addresses and routes).
Previously, it had a boolean flag "os_in_platform", that should be
true if (and only if) we have a corresponding NMPObject in the platform
cache.
But NMPObjects are immutable and ref-counted. That means, we can just as
well track the reference to the NMPObject from the cache. The advantage
is that we have an index (dictionary) to find the object state, and by
tracking the platform object, we have it easily accessible.
NML3ConfigData is supposed to be immutable. It can be initialized from a
NMConnection, and its DNS priority property might be zero.
For the DNS priority, the value can be overwritten by global defaults.
We thus need to inject the default value at the right place.
We will use these values from NML3Cfg, and it seems wrong that NML3Cfg
would include "dns/nm-dns-manager.h" for this.
Enums are very "static". They have no logic, and there is less need to
separate the code well. Meaning, it doesn't hurt to define this enum
in "libnm-base/nm-base.h" which can be included by (almost) anybody.
There was always the idea that you could pass paths and filenames
to "nm-code-format.sh" to format only a subset. However, the script
also needs to honor files that should be excluded and don't need
formatting.
Previously, what was implemented via `git ls-files -- ':(exclude)...'`
command, but git-ls-files has a bug ([1]) and might not list all files.
Refactor and do the filtering ourselves.
[1] https://www.spinics.net/lists/git/msg397982.html
Starting with OVS plugin installed but OVS service stopped, would lead to
<trace> [1631531732.8896] ovsdb: connect: opening /run/openvswitch/db.sock failed ("error connecting socket (No such file or directory)"). Retry with nm-sudo
...
<trace> [1631531732.9751] ovsdb: connect: failure to get FD from nm-sudo: GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._g_2dio_2derror_2dquark.Code1: error connecting socket (No such file or directory)
If we already know that the socket file does not exist, we don't need to ask nm-sudo.
That would only make sense, if nm-sudo somehow saw a different file systemd than
NetworkManager, but that is (currently) not the case.
The memory layout of the NMPlatformIPAddress structure changed. The unit test
needs to be adjusted.
Fixes: 9ec9a92f17 ('platform: avoid bitfield at end of __NMPlatformIPAddress_COMMON macro')
NetworkManager (the daemon) has no defined working directory, so
it can only handle absolute path names. This is in general and also for
the LoadConnections() D-Bus call.
That means, nmcli should make relative paths absolute.
We don't use g_canonicalize_filename() because that also cleans up
double slash and "/./". I don't think we should do that in this case, we
should only prepend $PWD to make the path absolute.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/issues/794
Due to this, `nmcli connection load` would also not print a warning
about failure to load obviously bogus files:
$ nmcli connection load /bogus
Note that load is also used to unload files, so if the file name is a
possibly valid name for a non-existing file, there is no failure. For
example, we get no warning for
$ nmcli connection load /etc/NetworkManager/system-connections/bogus
Even if currently no such file is loaded, then the operation would still
silently succeed, instead of succeeding the first time only. That is because
load should be idempotent.
[thaller@redhat.com: rewrote commit message]
Fixes: 4af6219226 ('libnm: implement nm_client_load_connections_async() by using GDBusConnection directly')
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/issues/794https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/979
NMPlatformIPAddress, NMPlatformIP4Address and NMPlatformIP6Address are supposed
to have a common first part, which is address family agnostic. For that, the
is the macro __NMPlatformIPAddress_COMMON which defines the first fields.
Something similar is also done for routes and object types that have an ifindex.
Anyway, __NMPlatformIPAddress_COMMON used to have a bitfield as last element.
In particular NMPlatformIP4Address then has a bitfield as first IPv4 specific
field. With this it's not clear to me that the alignment is guaranteed
to be the same for all structs.
Avoid the trailing bitfield at __NMPlatformIPAddress_COMMON to workaround
this potential problem.
This helper class is supposed to encapsulate most logic about
configuring IPv6 link local addresses and exposes a simpler API in order
to simplify NMDevice. Currently this logic is spread out in NMDevice.
Also, NML3IPv6LL directly uses NML3Cfg, thereby freeing NMDevice to care
about that too much.
For several reasons, NML3IPv6LL works different than NML3IPv4LL.
For one, with IPv6 we need to configure the address in kernel, which does
DAD for us. So, NML3IPv6LL will tell NML3Cfg to configure those
addresses that it wants to probe. For IPv4, it only tells NML3Cfg to do
ACD, without configuring anything yet. That is left to the caller.
NML3Cfg tracks state about all addresses/routes. It needs that (at
least) for the following reaons:
1) if a address/route gets added by NetworkManager and then gets
externally removed then it is presumed that the user did this. In this
case, we remember that ("externally-removed") to not re-add the
address/route, until we do a full reapply. This was previously
tracked as "externally_removed_objs_hash".
2) when NML3Cfg configures a address/route in kernel, and later the
address/route is no longer to be configured, then NML3Cfg needs to
delete it again. It thus needs to remember which addresses/routes
it configured earlier to remove them. This was previously tracked via
"last_addresses_x" and "last_routes_x".
3) kernel rejects configuring certain routes while a related IPv6
address is still tentative. That means, NML3Cfg needs to detect that,
remember it, and retry later. That is previously tracked as
"routes_temporary_not_available_hash".
4) during NM_L3_CFG_COMMIT_TYPE_ASSUME, we don't remove extraneous
and don't add missing addresses/routes. This commit mode is done
while assuming a device, that is, gracefully taking over after
a restart. However, sometimes while assuming a device we forcefully
want to configure an address/route. That happens for example if we
do IPv6 link local addressing. Then we really want to add that
address/route, even in assume mode. That is what the
NM_L3CFG_CONFIG_FLAGS_ASSUME_CONFIG_ONCE flag does, and to implement
that we need to track whether we already tried to add the
address/route previously. This is something new.
Consolidate these various states in a new "obj_state_hash" and
"ObjStateData" structure. This solves above points the following way:
1) to track externally removed objects, we have a flag in ObjStateData
that indicates whether the object was every configured and whether
it currently is configured. Based on that we make decisions to
configure (or not) an address. See "_obj_states_sync_filter()".
2) we now mark objects that NML3Cfg configured, which are still in platform
and which are no longer to be configured as "zombies".
3) this is now tracked via ObjStateData's "os_temporary_not_available_lst".
4) with the available ObjStateData we can make appropriate decisions
in "_obj_states_sync_filter()".
It's a bit tricky how this flag works. It's needed for IPv6
link local addresses, which commits changes in %NM_L3_CFG_COMMIT_TYPE_ASSUME
mode. See the code comments how it works.
This commit only adds the flags and let's the NMPlatformIP{Address,Route}
properly track it. What is still needed is to actually implement any
meaning to that during the sync.
This flag is only relevant for IPv4. That is, because the way we do
ACD/DAD is fundamentally different between IPv4 and IPv6. For IPv4, we
use libn-acd while IPv6 we configure the address in kernel and wait for
the tentative flag to go away.
NMPlatformIP{Address,Route} are mainly the structs that we receive via
netlink and get cached in the NMPlatform cache.
However, the same structures are also used by the upper layers to track
which addresses to add.
Add a flag to addresses and routes, for a certain behavior, relevant
during NML3Cfg commit. The idea is that during commits for NML3Cfg of
type NM_L3_CFG_COMMIT_TYPE_ASSUME, no new addresses are added that
are not already configured. In some cases, we want to override that,
and need a flag to track that. More about that later.
The host-id gets read from /var/lib/NetworkManager/secret_key, and cached in
a global variable. Other parts of the code can get the host ID using a
singleton function.
For testing, we need to inject a different host-id. Add two push/pop
functions for that.
Unlike nm_utils_host_id_get(), these functions are not thread-safe (nor
is it possible to make them thread-safe in a reasonable manner).
The name prefix "nmtst_*" is reserved for test helpers and stub
function. Such functions should not be in the actual build artifacts,
like the NetworkManager binary.
Instead, nmtst_connection_assert_unchanging() is not a test helper. It
is a assertion function that is only enabled with NM_MORE_ASSERTS
builds. That's different.
Rename.
In other words,
$ nm src/core/NetworkManager src/libnm-client-impl/.libs/libnm.so | grep nmtst
should give no results.
We have a copy of a few linux user space headers in `src/linux-headers`.
The idea is that we want to use recent kernel API, and not depend on the
kernel UAPI headers installed on the build system (and not need to
workaround that).
However, we may not be able to simply compile them, because they too
have dependencies. For example,
../src/linux-headers/ethtool.h:1389:2: error: implicit declaration of function '__KERNEL_DIV_ROUND_UP' [-Werror=implicit-function-declaration]
__u32 queue_mask[__KERNEL_DIV_ROUND_UP(MAX_NUM_QUEUE, 32)];
^
As workaround, don't include headers from "linux-headers" directly,
but only include the new "libnm-std-aux/nm-linux-compat.h" adapter
header, which tries to solve these incompatibilities.
Fixes: 34d48d2596 ('platform: clear all BASE types when setting advertised modes for ethernet autoneg')
The check whether the current setting are already as expected are wrong.
The reason is that nm_platform_ethtool_set_link_settings() also sets
the announced ethernet modes, but nm_platform_ethtool_get_link_settings()
does not give them.
That means, we cannot check whether the current link configuration is
the same, because the getter doesn't give that information.
Consequently, we must not skip the setting on the assumption that
there is nothing to change.
This bug has bad effects. If the device is currently activated with ethtool
option set, then re-activating the profile will result in wrongly
skipping the update.
Disabling autoneg is not supported for Gigabit ethernet. But it seems that
ixgbe also doesn't honor
ethtool -s enp5s0f0 speed 100 duplex full autoneg off
As a workaround, when we disable autoneg then always set the advertised
modes too. I think (hope) that should not have a bad effect otherwise,
but seems most sensible for ixgbe.
There is no point in logging the current speed/duplex. OK, with
the "*", we could at least see whether the printed values are
to be set, or are currently configured on the interface.
But mixing these two outputs is confusing and meaningless.
Either log what we are about to do, or what the current configuration
is. Not a mix of both.
