The return value of find_port_info() can be potentially NULL.
Check for this before trying to access its values.
Fixes: a8329587c8 ('device: fix bug when deactivating port connections asynchronously')
Using nm_device_create_l3_config_data_from_connection in favor of
nm_l3_config_data_new_from_connection allows the connection
properties: connection.mdns, connection.llmnr,
connection.dns-over-tls, connection.dnssec, connection.mptcp-flags,
and ipv6.ip6-privacy to be read from the vpn's connection settings
allowing them to be applied to vpn connections.
Currently nm_device_create_l3_config_data_from_connection uses the
connection applied to the given device for some properties. Altough
this currently works since all users of
nm_device_create_l3_config_data_from_connection provide the applied
connection as parameter, it behaves unexpectedly when another
connection is given.
Fix the rule that triggers this job so it is run each time that a commit
is pushed/merged to main. The incorrect rule was doing that it only ran
when the *source* branch (or a MR) was called "main". Therefore, it was
(almost) never running.
Fixes: 69efb4660c ('CI: periodically clean image's registry')
This is needed to ensure that the right CleanupType is chosen when
calling to nm_device_state_changed() a bit later. With this change
CLEANUP_TYPE_REMOVED will be used instead of CLEANUP_TYPE_DECONFIGURE,
which is wrong because the device has already disappeared.
As we introduced the ipv4.forwarding property in a8a2e6d727 ('ip-config:
Support configuring per-device IPv4 sysctl forwarding option'), we must
not enable or disable the global forwarding setting in the kernel, as it
affects to all the devices, maybe forcing them to behave in a way
different to what the user requested in ipv4.forwarding.
Instead, we need to selectively enable or disable the per-device forwarding
settings. Specifically, only devices activated with ipv4.forwarding=auto
must have their forwarding enabled or disabled depending on shared
connections. Devices with yes/no must not be affected by shared connections.
Also, devices with ipv4.forwarding=auto must get the proper forwarding value
on activation, but also change it when shared connections appear or
disappear dynamically. Use the new sharing-ipv4-change signal from
nm_manager to achieve it.
Fixes: a8a2e6d727 ('ip-config: Support configuring per-device IPv4 sysctl forwarding option')
This signal notifies about the "sharing state", that's it, when there
is at least one shared connection active or not. Each device informs
to nm_manager when a shared connection is activated or deactivated
and nm_manager emits this signal when the first shared connection is
activated or the last one is deactivated.
For now we're only interested in IPv4 forwarding as it's the only one
that we need to track from nm_device (in following commits).
Fixes: a8a2e6d727 ('ip-config: Support configuring per-device IPv4 sysctl forwarding option')
With the ipv4.forwarding property we may modify the forwarding sysctl of
the device on activation. In next commits, we will also modify it if the
connection is shared, instead of modifying the global forwarding.
Restore the forwarding value to the default one when the device is
deconfigured for any reason.
Fixes: a8a2e6d727 ('ip-config: Support configuring per-device IPv4 sysctl forwarding option')
This reverts commit 2ad5fbf025.
It is actually a partial revert. The changes to documentation don't need
to be reverted.
Fixes: 2ad5fbf025 ('policy: refresh IPv4 forwarding after connection activation and disconnection')
Since we are now always building n-acd with eBPF, and
are able to detect eBPF support at runtime, we can
reflect this in the unit as well.
Add CAP_BPF to CapabilityBoundingSet, so that NM can
request to create a BPF map when setting up n-acd.
0d4dcc9bb4 n-dhcp4: introduce n_dhcp4_c_connection_clear_client_ip() helper
433c57ab2e n-dhcp4: Do not set ciaddr in DISCOVER state.
feacc2cccd n-dhcp4: change the default DSCP value to 0
b64e2c62e8 n-dhcp4: support setting the DSCP value
6cfa9d84d0 n-dhcp4: set xid of the DHCP header for RELEASE and DECLINE message
git-subtree-dir: src/n-dhcp4
git-subtree-split: 0d4dcc9bb45d5a63d53a787289ad79823343e624
Trying to resolve hosts using localhost errors out for ipv6 attempts:
$ host www.seznam.cz localhost
;; communications error to ::1#53: connection refused
;; communications error to ::1#53: connection refused
Using domain server:
Name: localhost
Address: 127.0.0.1#53
Aliases:
www.seznam.cz has address 77.75.77.222
www.seznam.cz has address 77.75.79.222
;; communications error to ::1#53: connection refused
;; communications error to ::1#53: connection refused
www.seznam.cz has IPv6 address 2a02:598:a::79:222
www.seznam.cz has IPv6 address 2a02:598:2::1222
;; communications error to ::1#53: connection refused
;; communications error to ::1#53: connection refused
It's because on some distros (like openSUSE), localhost is defined both
as 127.0.0.1 and ::1.
So listen on ::1 too. This makes ipv4-switchoff easier.
/etc/resolv.conf should likely be updated to contain ::1 eventually too
(see update_dns()).
Fixes https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/issues/1188
Using g_file_set_contents() makes it impossible to write a proper
SELinux policy because the function creates a file with a random
suffix, and SELinux file transitions can't match on wildcards.
Use a fixed temporary file name. In this case it's fine because
/run/NetworkManager is only writable by root and NetworkManager is the
only process writing into it.
These lines says things like "changed a bridge", what seems to mean that
NM is doing the change. Actually, these logs indicate changes that NM is
being notified of, and they may even be external changes.
- Add the "monitor:" prefix to show that it's something that NM is
monitoring, not doing.
- Say "bridge changed" instead of "changed a bridge", which sounds an
action that we're doing.
- Print the bridge/port/iface name first, instead of the uuid-like key which
is not useful for a quick look by a human.
- Print `connection=conn-uuid` instead of just `conn-uuid`, as it's not
obvious that the uuid refers to the connection.
Before:
ovsdb: obj[bridge:8c975244-cb0a-4add-8901-c398dcbc27d6]: changed a bridge: br-int, b1ef934d...
After:
ovsdb: monitor: br-int: bridge changed: obj[bridge:8c975244-cb0a-4add-8901-c398dcbc27d6], connection=b1ef934d...
If a feature like Wi-Fi, OVS, team, etc. is disabled or no longer
supported, it is better to report an error when the connection is
added via nmcli than accepting the connection and complaining later
about a "missing plugin"; there is no plugin and the connection will
never be able to activate.
Example errors now:
# nmcli connection add type team
Error: Failed to add 'team-nm-team' connection: team support is disabled in this build
# nmcli connection add type gsm
Error: Failed to add 'gsm' connection: WWAN support is disabled in this build
# nmcli connection add type wimax nsp 00:99:88:77:66:55
Error: Failed to add 'wimax' connection: WiMAX is no longer supported
Note that we don't touch libnm-core (the part defining the settings
and properties), as that defines the API of NetworkManager. The API
should not change according to compile flags.
When authenticating via 802.1X, the supplicant must be made aware of
the bridge the interface is attached to. This was already done for
wifi in commit ae31b4bf4e ('wifi: set the BridgeIfname supplicant
property when needed'). When setting the BridgeIfname property, the
supplicant opens an additional socket to listen on the bridge, to
ensure that all incoming EAPOL packets are received.
Without this patch, the initial authentication usually works because
it is started during stage2 (prepare), when the device is not yet
attached to the bridge, but then the re-authentication fails.
Note: I could reproduce the problem only when the bridge is configured
with bridge.group-forward-mask 8.
Resolves: https://issues.redhat.com/browse/RHEL-121153https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/2301
Document a known limitation that we delete bridges and ports from ovsdb
when we remove their last NM-owned attached port or interface, even if
other externally added ports or interfaces exist.
The commit linked below introduced a bug that caused that OVS ports
added externally to NM are always deleted when we delete any OVS
interface. It affects to all externally added ports, including those
that are not related to the deleted interface and even those in
different OVS bridges.
Fix it by only modifying ports and bridges that are ascendants of the
deleted interface, leaving everything else untouched.
Note that bridges and ports still need to have at least one NM-managed
interface, otherwise they will also be purged. For example, an NM-owned
OVS bridge with 2 ports+iface, one NM-owned and one external: if we
delete the NM-owned iface, both ports and the bridge will be deleted.
For now, this is a known limitation that is not being fixed here.
Fixes: 476c89b6f2 ('ovs: only keep bridges and ports with NM interfaces attached')
