When creating a MACVLAN device it can have an unrealized parent. In that
case, the parent won't have an ifindex and it will cause a crash due to
an assert on parent being missing.
In order to avoid this, we are handling the situation similar to what we
do for VLAN devices. NetworkManager will raise different error and block
the autoconnection instead of crashing.
This solves the crash for the following commands:
```
nmcli connection add type macvlan ifname mv1 con-name mv1+ macvlan.parent dummy0 mode vepa
nmcli connection add type dummy ifname dummy0 con-name dummy0+ autoconnect no
```
There were a few places where we did already this but there was one
place where we missed it, in nm-manager.c:do_sleep_wake(). Therefore,
the device end in DISCONNECTED state and did not assume the connection.
The `\0` being used to refer to the whole match is a GNU
extension. On other implementations of sed, this will simply
replace the each matched line with ` 0;`, resulting in symbols
being missing in the NetworkManager executable, which breaks the
wifi plugin and others.
Use `&` instead, which behaves as expected in all implementations.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1562
This is the IPv6 equivalent of arp_ip_target option. It requires
arp_interval set and allow the user to specify up to 16 IPv6 addresses
as targets. By default, the list is empty.
The valid values for this option are 0 (off) and 1 (on). By default the
value is 1 (on). Please notice that this option is only compatible with
802.3AD mode.
The new arp_missed_max option valid range is 0-255 where value 0 means
not set. Please notice that this option is not compatible with 802.3AD,
balance-tlb and balance-alb modes.
We must first check whether a->arp_ip_targets_num and
b->arp_ip_targets_num are identical. Otherwise, this accesses
potentially uninitialized values.
Fixes: f900f7bc2c ('platform: add netlink support for bond link')
When reloading the configuration and there is a global DNS
configuration without domains, NM crashes in global_dns_equal()
because `old->domains` and `new->domains` are both NULL. Fix that.
Thread 1 "NetworkManager" received signal SIGTRAP, Trace/breakpoint trap.
0 g_logv (log_domain=0x7fe81a2110be "GLib", log_level=G_LOG_LEVEL_CRITICAL, format=<optimized out>, args=<optimized out>) at ../glib/gmessages.c:1433
1 g_log (log_domain=<optimized out>, log_level=<optimized out>, format=<optimized out>) at ../glib/gmessages.c:1471
2 g_hash_table_size (hash_table=<optimized out>) at ../glib/ghash.c:2183
3 g_hash_table_size (hash_table=<optimized out>) at ../glib/ghash.c:2181
4 global_dns_equal (new=0xecc540, old=0xe618e0) at ../src/core/nm-config-data.c:1466
5 nm_config_data_diff (old_data=old_data@entry=0xe60020, new_data=new_data@entry=0xe606a0) at ../src/core/nm-config-data.c:1946
6 _set_config_data (self=0xe45810, new_data=0xe606a0, reload_flags=NM_CONFIG_CHANGE_CAUSE_SIGHUP) at ../src/core/nm-config.c:2923
7 nm_config_reload (self=0xe45810, reload_flags=NM_CONFIG_CHANGE_CAUSE_SIGHUP, emit_warnings=emit_warnings@entry=1) at ../src/core/nm-config.c:2875
8 nm_main_config_reload (signal=<optimized out>) at ../src/core/main.c:141
9 sighup_handler (user_data=<optimized out>) at ../src/core/main-utils.c:26
10 g_main_dispatch (context=0xe619e0) at ../glib/gmain.c:3444
11 g_main_context_dispatch (context=0xe619e0) at ../glib/gmain.c:4162
12 g_main_context_iterate.constprop.0 (context=0xe619e0, block=1, dispatch=1, self=<optimized out>) at ../glib/gmain.c:4238
13 g_main_loop_run (loop=0xe5e310) at ../glib/gmain.c:4438
14 main (argc=<optimized out>, argv=<optimized out>) at ../src/core/main.c:515
Fixes: 1f0d1d78d2 ('dns-manager: always apply options from [global-dns]')
In file included from ./src/libnm-std-aux/nm-default-std.h:102,
from ./src/libnm-glib-aux/nm-default-glib.h:11,
from ./src/libnm-glib-aux/nm-default-glib-i18n-prog.h:13,
from ./src/core/nm-default-daemon.h:11,
from src/core/nm-connectivity.c:8:
src/core/nm-connectivity.c: In function ‘nm_connectivity_check_start’:
./src/libnm-std-aux/nm-std-aux.h:180:12: error: ‘reason’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (expr) \
^
src/core/nm-connectivity.c:1055:29: note: ‘reason’ was declared here
const char *reason;
^~~~~~
The compiler may dislike this:
CC src/core/platform/tests/libNetworkManagerTest_la-test-common.lo
In function '_ip_address_add',
inlined from 'nmtstp_ip4_address_add' at ../src/core/platform/tests/test-common.c:1892:5:
../src/core/platform/tests/test-common.c:1807:63: error: array subscript 'NMIPAddr {aka const struct _NMIPAddr}[0]' is partly outside array bounds of 'in_addr_t[1]' {aka 'unsigned int[1]'} [-Werror=array-bounds]
1807 | peer_address->addr4,
| ~~~~~~~~~~~~^~~~~~~
../src/core/platform/tests/test-common.c: In function 'nmtstp_ip4_address_add':
../src/core/platform/tests/test-common.c:1886:36: note: object 'peer_address' of size 4
1886 | in_addr_t peer_address,
| ~~~~~~~~~~~~^~~~~~~~~~~~
...
Fixes: 06aafabf14 ('platform/test: add test adding IPv4 addresses that only differ by their peer-address')
Now the settings in the [global-dns] section are used *in addition* to
connection-specific ones. Only the global domains sections, when
valid, override connection settings. Update the man page to clarify
that.
Fixes: 1f0d1d78d2 ('dns-manager: always apply options from [global-dns]')
The global configuration now can be valid when there are no global
domains defined. The dnsmasq backend must process it and then, if
there is no global default domain, also process the per-connection
settings.
Fixes: 1f0d1d78d2 ('dns-manager: always apply options from [global-dns]')
The link object is no longer valid after the cache gets updated in
nm_platform_link_change().
Fixes: e02fd76d9f ('platform: support changing link properties')
OVS interfaces are special: the kernel link is created only after the
device is attached to the ovs-port, and as with all ports this happens
during stage3(ip-config). That means that the link doesn't exist
during stage2(config); therefore, explicitly update link properties
once the link appears.
There are many functions to replace properties of a link
(link_set_address, link_set_mtu, link_set_name, link_change,
etc.). Eventually, they will be replaced by a function that does
everything and removes all the code duplication.
That function will be named link_change(); rename the current
link_change() to link_change_extra().
We need to set the ethtool and tc properties for assumed devices,
since they go through a normal activation. External devices should not
be touched by NM.
We are passing to the plugin only 'sett_flags', which is the bitmask
of flags to change and works together with 'sett_mask'; however,
plugins interpret that value as the new flags value. The result is
that if there is no change needed (0/0), the existing flags are lost.
Simple reproducer:
ip link add dummy1 type dummy
ip link set dummy1 up
ip addr add dev dummy1 fd01::12/64
sleep 1
# now, a external connection is created by NM
echo "BEFORE:"
cat /run/NetworkManager/system-connections/dummy1.nmconnection | grep "nm-generated\|volatile\|external"
# just add a new address to the interface to make it lose
# the external flag
ip addr add dev dummy1 172.25.42.1/24
sleep 1
echo "AFTER:"
cat /run/NetworkManager/system-connections/dummy1.nmconnection | grep "nm-generated\|volatile\|external"
Output:
BEFORE:
nm-generated=true
volatile=true
external=true
AFTER:
Fixes: d35d3c468a ('settings: rework tracking settings connections and settings plugins')
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1548
Add overrides for properties constants of new objects to allow to match them with their
object type as it was the case for former objects.
Specify the types of properties with element-types.
Namespace Attributes so that they are logically sorted.
Remove several skips to allow to use the entirety of the visible methods.
Allows to use this function in GObject introspected languages.
Also workaround a current issue with the gtk-doc parser not taking nested
element-type into account.
Request the extack_msg for nm_platform_ip_route_add() call. Note that we (currently)
don't do anything with it, however requesting it has no downsides. That is, the
message already is heap allocated in the lower layers, so this only affects whether
it will be returned up to nm_platform_ip_route_sync().
