NetworkManager/src/backends/NetworkManagerGentoo.c

577 lines
13 KiB
C
Raw Normal View History

/* NetworkManager -- Network link manager
*
* Dan Williams <dcbw@redhat.com>
* Dan Willemsen <dan@willemsen.us>
2004-10-13 Dan Williams <dcbw@redhat.com> * panel-applet/NMWirelessApplet.c - Add function to print out applet_state in a readable manner * src/NetworkManager.c - (main): Don't segfault when nm_dbus_init() fails, we had a left-over call to hal_shutdown() into which we passed NULL * src/NetworkManagerAP.c - (nm_ap_set_essid): Allow NULL essids * src/NetworkManagerAPList.[ch] - More use of nm_ap_list_[un]lock () - (nm_ap_list_get_ap_by_essid): don't warn when looking for a NULL network/essid, just return nothing. Also skip over NULL essid access points in the list when searching - (nm_ap_list_get_ap_by_address): new function - (nm_ap_list_update_network): set the access point's key source to NULL when the key returned from NetworkManagerInfo is NULL or of 0 length - nm_ap_list_update_keys() -> nm_ap_list_update_properties(), and copy timestamp over too - (nm_ap_list_copy_essids_by_address): new function, attempt to find the correct ESSID for a blank-essid access point by searching through another list and matching access point MAC addresses - (nm_ap_list_diff): exclude blank-essid access points from the diffs * src/NetworkManagerDbus.c - (nm_dbus_nm_set_active_device): deal with random networks the user may specify. This is mainly for access points that don't broadcast their essid. So if the user tells us to associate with some random ESSID that's not in our access point list, we find out if the access point does in fact exist (by attempting association and then matching that access point's MAC address with the essid the user gave us) and then we switch to it. - (nm_dbus_devices_handle_request): don't add blank-essid access points to the returned list of networks for the "getNetworks" method * src/NetworkManagerDevice.[ch] - Extra debugging info for link detection - (nm_device_ap_list_get_ap_by_address): new function, return an AP based on MAC address - (nm_device_get_path_for_ap): ignore blank-essid access points - (nm_device_wireless_network_exists): new function, find out whether a random ESSID exists by attempting to associate with it - (nm_device_do_normal_scan): allow blank-essid access points in our device list as long as they have an AP MAC address we can use. Also send WirelessNetwork[Dis]Appeared signals for non-active devices too. Lets the applet update more frequently. * src/backends/NetworkManagerGentoo.c - Patch from: Robert Paskowitz - Update backend code for Gentoo - Implement nm_system_device_update_config_info () * test/nmclienttest.c - (set_network_device): new function, takes a command-line argument and tells NetworkManager to use that wireless network git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@222 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2004-10-13 20:57:23 +00:00
* Robert Paskowitz
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* (C) Copyright 2004 Red Hat, Inc.
* (C) Copyright 2004 Dan Willemsen
2004-10-13 Dan Williams <dcbw@redhat.com> * panel-applet/NMWirelessApplet.c - Add function to print out applet_state in a readable manner * src/NetworkManager.c - (main): Don't segfault when nm_dbus_init() fails, we had a left-over call to hal_shutdown() into which we passed NULL * src/NetworkManagerAP.c - (nm_ap_set_essid): Allow NULL essids * src/NetworkManagerAPList.[ch] - More use of nm_ap_list_[un]lock () - (nm_ap_list_get_ap_by_essid): don't warn when looking for a NULL network/essid, just return nothing. Also skip over NULL essid access points in the list when searching - (nm_ap_list_get_ap_by_address): new function - (nm_ap_list_update_network): set the access point's key source to NULL when the key returned from NetworkManagerInfo is NULL or of 0 length - nm_ap_list_update_keys() -> nm_ap_list_update_properties(), and copy timestamp over too - (nm_ap_list_copy_essids_by_address): new function, attempt to find the correct ESSID for a blank-essid access point by searching through another list and matching access point MAC addresses - (nm_ap_list_diff): exclude blank-essid access points from the diffs * src/NetworkManagerDbus.c - (nm_dbus_nm_set_active_device): deal with random networks the user may specify. This is mainly for access points that don't broadcast their essid. So if the user tells us to associate with some random ESSID that's not in our access point list, we find out if the access point does in fact exist (by attempting association and then matching that access point's MAC address with the essid the user gave us) and then we switch to it. - (nm_dbus_devices_handle_request): don't add blank-essid access points to the returned list of networks for the "getNetworks" method * src/NetworkManagerDevice.[ch] - Extra debugging info for link detection - (nm_device_ap_list_get_ap_by_address): new function, return an AP based on MAC address - (nm_device_get_path_for_ap): ignore blank-essid access points - (nm_device_wireless_network_exists): new function, find out whether a random ESSID exists by attempting to associate with it - (nm_device_do_normal_scan): allow blank-essid access points in our device list as long as they have an AP MAC address we can use. Also send WirelessNetwork[Dis]Appeared signals for non-active devices too. Lets the applet update more frequently. * src/backends/NetworkManagerGentoo.c - Patch from: Robert Paskowitz - Update backend code for Gentoo - Implement nm_system_device_update_config_info () * test/nmclienttest.c - (set_network_device): new function, takes a command-line argument and tells NetworkManager to use that wireless network git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@222 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2004-10-13 20:57:23 +00:00
* (C) Copyright 2004 Robert Paskowitz
*/
#include <stdio.h>
#include <sys/types.h>
#include <signal.h>
#include <arpa/inet.h>
#include "NetworkManagerSystem.h"
#include "NetworkManagerUtils.h"
#include "nm-device.h"
#include "nm-device-802-3-ethernet.h"
#include "nm-device-802-11-wireless.h"
#include "nm-utils.h"
#include "shvar.h"
/*
* nm_system_init
*
* Initializes the distribution-specific system backend
*
*/
void nm_system_init (void)
{
/* Kill any dhclients lying around */
nm_system_kill_all_dhcp_daemons ();
}
/*
* nm_system_device_flush_routes
*
* Flush all routes associated with a network device
*
*/
void nm_system_device_flush_routes (NMDevice *dev)
{
g_return_if_fail (dev != NULL);
2004-08-31 Dan Williams <dcbw@redhat.com> * Remove 'debug' extern global from all files since we now use syslog() * src/NetworkManager.[ch] - Break out routine that get the net.interface property from HAL, removing that logic from nm_create_device_and_add_to_list() - (nm_create_device_and_add_to_list): make this a bit more general so it doesn't do the talking to HAL. Also add arguments to facilitate the create of test devices. - (nm_data_mark_state_changed): rename from nm_data_set_state_modified() - (nm_data_new, main, nm_print_usage): add new argument "--enable-test-devices" which makes NetworkManager listen for dbus commands to create test devices, which have no backing hardware. Use when you're on a plane for example, and/or forgot your wireless card at home. Test devices _cannot_ be created unless NM is started with --enable-test-devices. * src/NetworkManagerDbus.[ch] - New "getLinkActive" method for devices - New "setLinkActive" method for devices (only works on test devices) - New "createTestDevice" method on NetworkManager object to create a test device of a specified type (ie wired, wireless). UDI is created from scratch, as is the interface name. Only works when NM is started with --enable-test-devices switch. - New "removeTestDevice" method on NetworkManager object which removes a test device. Only works when NM is started with --enable-test-devices * src/NetworkManagerDevice.[ch] - Logic to facilitate test devices. Add variables to NMDevice struct to indicate whether a device is a test device or not, and what its link status is. - Deal with test devices in most functions. For those that work directly on hardware special-case test devices. - (nm_device_new): don't create a test device if test devices weren't enabled on the command-line. - (nm_device_update_link_active): split out logic for wired and wireless device link checking to separate functions to facilitate test device link checking. - (nm_device_set_enc_key): Since some drivers for wireless cards are daft and don't make a distinction between System Authentication and Encryption (namely Cisco aironet), we use Open System auth when setting a WEP key on the card. We don't deal with Shared Key auth yet. - (nm_device_activation_worker): split the activation cancel check logic out into a separate routine nm_device_activation_cancel_if_needed() - (nm_device_activation_signal_cancel): rename from nm_device_activation_cancel() - (nm_device_fake_ap_list): Test wireless devices obviously cannot scan, so create a list of fake access points that they can "see" - (nm_device_is_test_device): return whether or not a device is a test device * src/NetworkManagerPolicy.c - (nm_policy_get_best_device): attempt to deal with wireless network selection, previously if you "locked"/forced NM to use a wireless device but then selected a wireless network for NM to use, it would switch to a wired device. So, if the active device is wireless and it has a "forced" best AP, use it if the "forced" best AP is still valid - (nm_state_modification_monitor): deal with NULL best devices, for example there were no usable network devices, or the last one was removed * src/backends/NetworkManager*.c - Deal with test devices, mostly just return success for operations like getting a DHCP address * test/nmtestdevices.c - Test tool to create/remove/link-switch test devices git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@112 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2004-08-31 16:09:15 +00:00
/* Not really applicable for test devices */
if (nm_device_is_test_device (dev))
return;
nm_system_device_flush_routes_with_iface (nm_device_get_iface (dev));
}
/*
* nm_system_device_flush_routes_with_iface
*
* Flush all routes associated with a network device
*
*/
void nm_system_device_flush_routes_with_iface (const char *iface)
{
char *buf;
g_return_if_fail (iface != NULL);
/* Remove routing table entries */
buf = g_strdup_printf ("/sbin/ip route flush dev %s", iface);
nm_spawn_process (buf);
g_free (buf);
}
/*
* nm_system_device_has_active_routes
*
* Find out whether the specified device has any routes in the routing
* table.
*
*/
gboolean nm_system_device_has_active_routes (NMDevice *dev)
{
return (FALSE);
}
/*
* nm_system_device_flush_addresses
*
* Flush all network addresses associated with a network device
*
*/
void nm_system_device_flush_addresses (NMDevice *dev)
{
g_return_if_fail (dev != NULL);
2004-08-31 Dan Williams <dcbw@redhat.com> * Remove 'debug' extern global from all files since we now use syslog() * src/NetworkManager.[ch] - Break out routine that get the net.interface property from HAL, removing that logic from nm_create_device_and_add_to_list() - (nm_create_device_and_add_to_list): make this a bit more general so it doesn't do the talking to HAL. Also add arguments to facilitate the create of test devices. - (nm_data_mark_state_changed): rename from nm_data_set_state_modified() - (nm_data_new, main, nm_print_usage): add new argument "--enable-test-devices" which makes NetworkManager listen for dbus commands to create test devices, which have no backing hardware. Use when you're on a plane for example, and/or forgot your wireless card at home. Test devices _cannot_ be created unless NM is started with --enable-test-devices. * src/NetworkManagerDbus.[ch] - New "getLinkActive" method for devices - New "setLinkActive" method for devices (only works on test devices) - New "createTestDevice" method on NetworkManager object to create a test device of a specified type (ie wired, wireless). UDI is created from scratch, as is the interface name. Only works when NM is started with --enable-test-devices switch. - New "removeTestDevice" method on NetworkManager object which removes a test device. Only works when NM is started with --enable-test-devices * src/NetworkManagerDevice.[ch] - Logic to facilitate test devices. Add variables to NMDevice struct to indicate whether a device is a test device or not, and what its link status is. - Deal with test devices in most functions. For those that work directly on hardware special-case test devices. - (nm_device_new): don't create a test device if test devices weren't enabled on the command-line. - (nm_device_update_link_active): split out logic for wired and wireless device link checking to separate functions to facilitate test device link checking. - (nm_device_set_enc_key): Since some drivers for wireless cards are daft and don't make a distinction between System Authentication and Encryption (namely Cisco aironet), we use Open System auth when setting a WEP key on the card. We don't deal with Shared Key auth yet. - (nm_device_activation_worker): split the activation cancel check logic out into a separate routine nm_device_activation_cancel_if_needed() - (nm_device_activation_signal_cancel): rename from nm_device_activation_cancel() - (nm_device_fake_ap_list): Test wireless devices obviously cannot scan, so create a list of fake access points that they can "see" - (nm_device_is_test_device): return whether or not a device is a test device * src/NetworkManagerPolicy.c - (nm_policy_get_best_device): attempt to deal with wireless network selection, previously if you "locked"/forced NM to use a wireless device but then selected a wireless network for NM to use, it would switch to a wired device. So, if the active device is wireless and it has a "forced" best AP, use it if the "forced" best AP is still valid - (nm_state_modification_monitor): deal with NULL best devices, for example there were no usable network devices, or the last one was removed * src/backends/NetworkManager*.c - Deal with test devices, mostly just return success for operations like getting a DHCP address * test/nmtestdevices.c - Test tool to create/remove/link-switch test devices git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@112 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2004-08-31 16:09:15 +00:00
/* Not really applicable for test devices */
if (nm_device_is_test_device (dev))
return;
nm_system_device_flush_addresses_with_iface (nm_device_get_iface (dev));
}
/*
* nm_system_device_flush_addresses_with_iface
*
* Flush all network addresses associated with a network device
*
*/
void nm_system_device_flush_addresses_with_iface (const char *iface)
{
char *buf;
g_return_if_fail (iface != NULL);
/* Remove all IP addresses for a device */
buf = g_strdup_printf ("/sbin/ip addr flush dev %s", iface);
nm_spawn_process (buf);
g_free (buf);
}
#if 0
/* Alert other computers of our new address */
temp_addr.s_addr = addr;
buf = g_strdup_printf ("/sbin/arping -q -A -c 1 -I %s %s", iface, inet_ntoa (temp_addr));
nm_spawn_process (buf);
g_free (buf);
g_usleep (G_USEC_PER_SEC * 2);
buf = g_strdup_printf ("/sbin/arping -q -U -c 1 -I %s %s", iface, inet_ntoa (temp_addr));
nm_spawn_process (buf);
g_free (buf);
#endif
/*
* nm_system_device_add_route_via_device_with_iface
*
* Add route to the given device
*
*/
void nm_system_device_add_route_via_device_with_iface (const char *iface, const char *route)
{
char *buf;
g_return_if_fail (iface != NULL);
/* Add default gateway */
buf = g_strdup_printf ("/sbin/ip route add %s dev %s", route, iface);
nm_spawn_process (buf);
g_free (buf);
}
/*
* nm_system_enable_loopback
*
* Bring up the loopback interface
*
*/
void nm_system_enable_loopback (void)
{
nm_spawn_process("/etc/init.d/net.lo start");
}
/*
* nm_system_flush_loopback_routes
*
* Flush all routes associated with the loopback device, because it
* sometimes gets the first route for ZeroConf/Link-Local traffic.
*
*/
void nm_system_flush_loopback_routes (void)
{
/* Remove routing table entries for lo */
nm_spawn_process ("/sbin/ip route flush dev lo");
}
/*
* nm_system_delete_default_route
*
* Remove the old default route in preparation for a new one
*
*/
void nm_system_delete_default_route (void)
{
nm_spawn_process ("/sbin/ip route del default");
}
/*
* nm_system_flush_arp_cache
*
* Flush all entries in the arp cache.
*
*/
void nm_system_flush_arp_cache (void)
{
nm_spawn_process ("/sbin/ip neigh flush all");
}
/*
* nm_system_kill_all_dhcp_daemons
*
* Kill all DHCP daemons currently running, done at startup
*
*/
void nm_system_kill_all_dhcp_daemons (void)
{
}
/*
* nm_system_update_dns
*
* Make glibc/nscd aware of any changes to the resolv.conf file by
* restarting nscd. Only restart if already running.
*
*/
void nm_system_update_dns (void)
{
#ifdef NM_NO_NAMED
if (nm_spawn_process ("/etc/init.d/nscd status") == 0)
nm_spawn_process ("/etc/init.d/nscd restart");
#else
nm_spawn_process("/usr/bin/killall -q nscd");
#endif
}
/*
* nm_system_restart_mdns_responder
*
* Restart the multicast DNS responder so that it knows about new
* network interfaces and IP addresses.
*
*/
void nm_system_restart_mdns_responder (void)
{
nm_spawn_process("/etc/init.d/mDNSResponder stop");
nm_spawn_process("/etc/init.d/mDNSResponder zap");
nm_spawn_process("/etc/init.d/mDNSResponder start");
}
/*
* nm_system_device_add_ip6_link_address
*
* Add a default link-local IPv6 address to a device.
*
*/
void nm_system_device_add_ip6_link_address (NMDevice *dev)
{
char *buf;
char *addr;
struct ether_addr hw_addr;
unsigned char eui[8];
if (nm_device_is_802_3_ethernet (dev))
nm_device_802_3_ethernet_get_address (NM_DEVICE_802_3_ETHERNET (dev), &hw_addr);
else if (nm_device_is_802_11_wireless (dev))
nm_device_802_11_wireless_get_address (NM_DEVICE_802_11_WIRELESS (dev), &hw_addr);
memcpy (eui, &(hw_addr.ether_addr_octet), sizeof (hw_addr.ether_addr_octet));
memmove (eui+5, eui+3, 3);
eui[3] = 0xff;
eui[4] = 0xfe;
eui[0] ^= 2;
/* Add the default link-local IPv6 address to a device */
buf = g_strdup_printf("/sbin/ip -6 addr add fe80::%x%02x:%x%02x:%x%02x:%x%02x/64 dev %s",
eui[0], eui[1], eui[2], eui[3], eui[4], eui[5],
eui[6], eui[7], nm_device_get_iface(dev));
nm_spawn_process(buf);
g_free(buf);
}
typedef struct GentooSystemConfigData
{
NMIP4Config * config;
gboolean use_dhcp;
} GentooSystemConfigData;
2004-09-08 Dan Williams <dcbw@redhat.com> * panel-applet/no-networkmanager.png panel-applet/Makefile.am panel-applet/NMWirelessApplet.c - Add a "NetworkManager not running" icon and use it - Use new consolidated GConf keys rather than Preferred/Trusted * TODO: update * info-daemon/NetworkManagerInfo.c info-daemon/NetworkManagerInfoDbus.[ch] info-daemon/NetworkManagerInfoPassphraseDialog.c - There are now no longer two separate lists of wireless networks, but one list where each network is "trusted" or not trusted - Add a "getNetworkTrusted" dbus method - "WirelessNetworkUpdate" signal now sent rather than "PreferredNetworkUpdate/TrustedNetworkUpdate" signals - Start freeing some dbus errors (not completed yet) * info-daemon/passphrase.glade - Remove the "don't show" hints for pager and taskbar - Add a title since its going to be in the taskbar * src/NetworkManager.[ch] src/NetworkManagerAPList.[ch] - There are now no longer two separate lists of wireless networks, but one list where each network is "trusted" or not trusted * src/NetworkManagerAP.[ch] - Add get/set "trusted" accessors and data bit * src/NetworkManagerDbus.[ch] - Add function to get "trusted" status of a network from NetworkManagerInfo - Trap new WirelessNetworkUpdate signal rather than old separate signals * src/NetworkManagerDevice.[ch] - Add per-device config data (ip4 addr, gateway, netmask) and accessors - (nm_device_new): Get device config from backend when initializing devices - (nm_device_activation_worker): Split out device configuration on activation to deal with static/dynamic IP differences, and try encryption fallbacks on a device if the encryption method for the best AP is not good - (nm_device_update_best_ap): convert to new consolidated access point lists from NetworkManagerInfo, and copy over latest NMI info to best_ap when setting it * src/NetworkManagerWireless.c - libgcrypt code wasn't converting the MD5 digest to an ascii string, fix it * src/backends/NetworkManagerRedHat.c src/backends/NetworkManagerSystem.h - (nm_system_device_update_config_info): Add function to get device configuration from system data in ifcfg-* files * src/backends/NetworkManagerDebian.c src/backends/NetworkManagerGentoo.c src/backends/NetworkManagerSlackware.c - Add stub functions for getting device configuration git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@131 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2004-09-08 18:14:42 +00:00
/*
* nm_system_device_get_system_config
2004-09-08 Dan Williams <dcbw@redhat.com> * panel-applet/no-networkmanager.png panel-applet/Makefile.am panel-applet/NMWirelessApplet.c - Add a "NetworkManager not running" icon and use it - Use new consolidated GConf keys rather than Preferred/Trusted * TODO: update * info-daemon/NetworkManagerInfo.c info-daemon/NetworkManagerInfoDbus.[ch] info-daemon/NetworkManagerInfoPassphraseDialog.c - There are now no longer two separate lists of wireless networks, but one list where each network is "trusted" or not trusted - Add a "getNetworkTrusted" dbus method - "WirelessNetworkUpdate" signal now sent rather than "PreferredNetworkUpdate/TrustedNetworkUpdate" signals - Start freeing some dbus errors (not completed yet) * info-daemon/passphrase.glade - Remove the "don't show" hints for pager and taskbar - Add a title since its going to be in the taskbar * src/NetworkManager.[ch] src/NetworkManagerAPList.[ch] - There are now no longer two separate lists of wireless networks, but one list where each network is "trusted" or not trusted * src/NetworkManagerAP.[ch] - Add get/set "trusted" accessors and data bit * src/NetworkManagerDbus.[ch] - Add function to get "trusted" status of a network from NetworkManagerInfo - Trap new WirelessNetworkUpdate signal rather than old separate signals * src/NetworkManagerDevice.[ch] - Add per-device config data (ip4 addr, gateway, netmask) and accessors - (nm_device_new): Get device config from backend when initializing devices - (nm_device_activation_worker): Split out device configuration on activation to deal with static/dynamic IP differences, and try encryption fallbacks on a device if the encryption method for the best AP is not good - (nm_device_update_best_ap): convert to new consolidated access point lists from NetworkManagerInfo, and copy over latest NMI info to best_ap when setting it * src/NetworkManagerWireless.c - libgcrypt code wasn't converting the MD5 digest to an ascii string, fix it * src/backends/NetworkManagerRedHat.c src/backends/NetworkManagerSystem.h - (nm_system_device_update_config_info): Add function to get device configuration from system data in ifcfg-* files * src/backends/NetworkManagerDebian.c src/backends/NetworkManagerGentoo.c src/backends/NetworkManagerSlackware.c - Add stub functions for getting device configuration git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@131 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2004-09-08 18:14:42 +00:00
*
* Retrieve any relevant configuration info for a particular device
* from the system network configuration information. Clear out existing
* info before setting stuff too.
*
*/
void *nm_system_device_get_system_config (NMDevice *dev)
2004-09-08 Dan Williams <dcbw@redhat.com> * panel-applet/no-networkmanager.png panel-applet/Makefile.am panel-applet/NMWirelessApplet.c - Add a "NetworkManager not running" icon and use it - Use new consolidated GConf keys rather than Preferred/Trusted * TODO: update * info-daemon/NetworkManagerInfo.c info-daemon/NetworkManagerInfoDbus.[ch] info-daemon/NetworkManagerInfoPassphraseDialog.c - There are now no longer two separate lists of wireless networks, but one list where each network is "trusted" or not trusted - Add a "getNetworkTrusted" dbus method - "WirelessNetworkUpdate" signal now sent rather than "PreferredNetworkUpdate/TrustedNetworkUpdate" signals - Start freeing some dbus errors (not completed yet) * info-daemon/passphrase.glade - Remove the "don't show" hints for pager and taskbar - Add a title since its going to be in the taskbar * src/NetworkManager.[ch] src/NetworkManagerAPList.[ch] - There are now no longer two separate lists of wireless networks, but one list where each network is "trusted" or not trusted * src/NetworkManagerAP.[ch] - Add get/set "trusted" accessors and data bit * src/NetworkManagerDbus.[ch] - Add function to get "trusted" status of a network from NetworkManagerInfo - Trap new WirelessNetworkUpdate signal rather than old separate signals * src/NetworkManagerDevice.[ch] - Add per-device config data (ip4 addr, gateway, netmask) and accessors - (nm_device_new): Get device config from backend when initializing devices - (nm_device_activation_worker): Split out device configuration on activation to deal with static/dynamic IP differences, and try encryption fallbacks on a device if the encryption method for the best AP is not good - (nm_device_update_best_ap): convert to new consolidated access point lists from NetworkManagerInfo, and copy over latest NMI info to best_ap when setting it * src/NetworkManagerWireless.c - libgcrypt code wasn't converting the MD5 digest to an ascii string, fix it * src/backends/NetworkManagerRedHat.c src/backends/NetworkManagerSystem.h - (nm_system_device_update_config_info): Add function to get device configuration from system data in ifcfg-* files * src/backends/NetworkManagerDebian.c src/backends/NetworkManagerGentoo.c src/backends/NetworkManagerSlackware.c - Add stub functions for getting device configuration git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@131 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2004-09-08 18:14:42 +00:00
{
char *cfg_file_path = NULL;
FILE *file = NULL;
char buffer[100];
char confline[100], dhcpline[100], ipline[100];
int ipa, ipb, ipc, ipd;
int nNext = 0, bNext = 0, count = 0;
char *confToken;
gboolean data_good = FALSE;
gboolean use_dhcp = TRUE;
GentooSystemConfigData *sys_data = NULL;
guint32 ip4_address = 0;
guint32 ip4_netmask = 0;
guint32 ip4_gateway = 0;
guint32 ip4_broadcast = 0;
g_return_val_if_fail (dev != NULL, NULL);
sys_data = g_malloc0 (sizeof (GentooSystemConfigData));
sys_data->config = nm_device_get_ip4_config(dev);
/* We use DHCP on an interface unless told not to */
sys_data->use_dhcp = TRUE;
nm_device_set_use_dhcp (dev, TRUE);
// nm_ip4_config_set_address (sys_data->config, 0);
// nm_ip4_config_set_gateway (sys_data->config, 0);
// nm_ip4_config_set_netmask (sys_data->config, 0);
/* Gentoo systems store this information in
* /etc/conf.d/net, this is for all interfaces.
*/
cfg_file_path = g_strdup_printf ("/etc/conf.d/net");
if (!cfg_file_path)
return NULL;
if (!(file = fopen (cfg_file_path, "r")))
{
g_free (cfg_file_path);
return NULL;
}
sprintf(confline, "iface_%s", nm_device_get_iface (dev));
sprintf(dhcpline, "iface_%s=\"dhcp\"", nm_device_get_iface (dev));
while (fgets (buffer, 499, file) && !feof (file))
{
/* Kock off newline if any */
g_strstrip (buffer);
if (strncmp (buffer, confline, strlen(confline)) == 0)
{
/* Make sure this config file is for this device */
if (strncmp (&buffer[strlen(confline) - strlen(nm_device_get_iface (dev))],
nm_device_get_iface (dev), strlen(nm_device_get_iface (dev))) != 0)
{
2005-03-14 Ray Strode <rstrode@redhat.com> Fourth (probably working) cut at porting to dbus 0.30 api and new hal. This cut adds some new logging macros to make debugging easier. * dispatcher-daemon/NetworkManagerDispatcher.c: * info-daemon/NetworkmanagerInfo.c: * info-daemon/NetworkManagerInfoPassphraseDialog.c: * info-daemon/NetworkManagerInfoVPN.c: * src/NetworkManager.c: * src/NetworkManagerAP.c: * src/NetworkManagerAPList.c: * src/NetworkManagerDHCP.c: * src/NetworkManagerDbus.c: * src/NetworkManagerDevice.c: * src/NetworkManagerPolicy.c: * src/NetworkManagerSystem.c: * src/NetworkManagerUtils.c: * src/NetworkManagerWireless.c: * src/autoip.c: * src/nm-dbus-nm.c: * src/backends/NetworkManagerDebian.c: * src/backends/NetworkManagerGentoo.c: * src/backends/NetworkManagerRedHat.c: * src/backends/NetworkManagerSlackware.c: use new logging macros. * dispatcher-daemon/NetworkManagerDispatcher.c: (nmd_dbus_filter): s/dbus_free/g_free/ * info-daemon/Makefile.am: link in utils library. * info-daemon/NetworkmanagerInfo.c: use new logging macros. (nmi_dbus_get_network): don't assume enumerations are 32-bit. (nmi_dbus_nmi_message_handler): don't free what doesn't belong to us. * libnm_glib/libnm_glib.c: (libnm_glib_get_nm_status): (libnm_glib_init): don't free what doesn't belong to us. (libnm_glib_dbus): strdup result, so it doesn't get lost when message is unref'd. * panel-applet/NMWirelessAppletDbus.c: (nmwa_dbus_update_devices): s/dbus_free/g_free/ * src/NetworkManager.c: (nm_monitor_wired_link_state): request initial status dump of all cards when we start up, instead of relying on /sys/.../carrier. (nm_info_handler), (nm_set_up_log_handlers): log handlers to specify what syslog priorites the logging macros default to. * src/NetworkManagerAPList.c: (nm_ap_list_populate_from_nmi): s/dbus_free_string_array/g_strfreev/ * src/NetworkManagerDbus.c: (nm_dbus_get_network_object): validate d-bus message argument types. Advance message iterator after reading argument, prepend instead of append to GSList. * src/NetworkManagerDevice.c: (nm_device_probe_wired_link_status): remove redundant /sys in /sys path. remove wrong contents == NULL means has carrier assumption. * src/nm-netlink-monitor.c (nm_netlink_monitor_request_status): implement function to ask kernel to dump interface link status over netlink socket. * test/*.c: s/dbus_free/g_free/ * utils/nm-utils.h: (nm_print_backtrace): new macro to print backtrace. (nm_get_timestamp): new macro to get sub-second precise unix timestamp. (nm_info), (nm_debug), (nm_warning), (nm_error): new logging functions. nm_info just prints, nm_debug includes timestamp and function, nm_warning includes function, nm_error includes backtrace and sigtrap. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@497 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2005-03-15 05:30:15 +00:00
nm_warning ("System config file '%s' does not define device '%s'\n",
cfg_file_path, nm_device_get_iface (dev));
break;
}
else
data_good = TRUE;
2004-10-13 Dan Williams <dcbw@redhat.com> * panel-applet/NMWirelessApplet.c - Add function to print out applet_state in a readable manner * src/NetworkManager.c - (main): Don't segfault when nm_dbus_init() fails, we had a left-over call to hal_shutdown() into which we passed NULL * src/NetworkManagerAP.c - (nm_ap_set_essid): Allow NULL essids * src/NetworkManagerAPList.[ch] - More use of nm_ap_list_[un]lock () - (nm_ap_list_get_ap_by_essid): don't warn when looking for a NULL network/essid, just return nothing. Also skip over NULL essid access points in the list when searching - (nm_ap_list_get_ap_by_address): new function - (nm_ap_list_update_network): set the access point's key source to NULL when the key returned from NetworkManagerInfo is NULL or of 0 length - nm_ap_list_update_keys() -> nm_ap_list_update_properties(), and copy timestamp over too - (nm_ap_list_copy_essids_by_address): new function, attempt to find the correct ESSID for a blank-essid access point by searching through another list and matching access point MAC addresses - (nm_ap_list_diff): exclude blank-essid access points from the diffs * src/NetworkManagerDbus.c - (nm_dbus_nm_set_active_device): deal with random networks the user may specify. This is mainly for access points that don't broadcast their essid. So if the user tells us to associate with some random ESSID that's not in our access point list, we find out if the access point does in fact exist (by attempting association and then matching that access point's MAC address with the essid the user gave us) and then we switch to it. - (nm_dbus_devices_handle_request): don't add blank-essid access points to the returned list of networks for the "getNetworks" method * src/NetworkManagerDevice.[ch] - Extra debugging info for link detection - (nm_device_ap_list_get_ap_by_address): new function, return an AP based on MAC address - (nm_device_get_path_for_ap): ignore blank-essid access points - (nm_device_wireless_network_exists): new function, find out whether a random ESSID exists by attempting to associate with it - (nm_device_do_normal_scan): allow blank-essid access points in our device list as long as they have an AP MAC address we can use. Also send WirelessNetwork[Dis]Appeared signals for non-active devices too. Lets the applet update more frequently. * src/backends/NetworkManagerGentoo.c - Patch from: Robert Paskowitz - Update backend code for Gentoo - Implement nm_system_device_update_config_info () * test/nmclienttest.c - (set_network_device): new function, takes a command-line argument and tells NetworkManager to use that wireless network git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@222 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2004-10-13 20:57:23 +00:00
if (strncmp (buffer, dhcpline, strlen(dhcpline)) == 0)
{
use_dhcp = TRUE;
}
else
{
use_dhcp = FALSE;
confToken = strtok(&buffer[strlen(confline) + 2], " ");
while (count < 3)
{
2004-10-13 Dan Williams <dcbw@redhat.com> * panel-applet/NMWirelessApplet.c - Add function to print out applet_state in a readable manner * src/NetworkManager.c - (main): Don't segfault when nm_dbus_init() fails, we had a left-over call to hal_shutdown() into which we passed NULL * src/NetworkManagerAP.c - (nm_ap_set_essid): Allow NULL essids * src/NetworkManagerAPList.[ch] - More use of nm_ap_list_[un]lock () - (nm_ap_list_get_ap_by_essid): don't warn when looking for a NULL network/essid, just return nothing. Also skip over NULL essid access points in the list when searching - (nm_ap_list_get_ap_by_address): new function - (nm_ap_list_update_network): set the access point's key source to NULL when the key returned from NetworkManagerInfo is NULL or of 0 length - nm_ap_list_update_keys() -> nm_ap_list_update_properties(), and copy timestamp over too - (nm_ap_list_copy_essids_by_address): new function, attempt to find the correct ESSID for a blank-essid access point by searching through another list and matching access point MAC addresses - (nm_ap_list_diff): exclude blank-essid access points from the diffs * src/NetworkManagerDbus.c - (nm_dbus_nm_set_active_device): deal with random networks the user may specify. This is mainly for access points that don't broadcast their essid. So if the user tells us to associate with some random ESSID that's not in our access point list, we find out if the access point does in fact exist (by attempting association and then matching that access point's MAC address with the essid the user gave us) and then we switch to it. - (nm_dbus_devices_handle_request): don't add blank-essid access points to the returned list of networks for the "getNetworks" method * src/NetworkManagerDevice.[ch] - Extra debugging info for link detection - (nm_device_ap_list_get_ap_by_address): new function, return an AP based on MAC address - (nm_device_get_path_for_ap): ignore blank-essid access points - (nm_device_wireless_network_exists): new function, find out whether a random ESSID exists by attempting to associate with it - (nm_device_do_normal_scan): allow blank-essid access points in our device list as long as they have an AP MAC address we can use. Also send WirelessNetwork[Dis]Appeared signals for non-active devices too. Lets the applet update more frequently. * src/backends/NetworkManagerGentoo.c - Patch from: Robert Paskowitz - Update backend code for Gentoo - Implement nm_system_device_update_config_info () * test/nmclienttest.c - (set_network_device): new function, takes a command-line argument and tells NetworkManager to use that wireless network git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@222 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2004-10-13 20:57:23 +00:00
if (nNext == 1 && bNext == 1)
{
ip4_address = inet_addr (confToken);
count++;
continue;
}
if (strcmp(confToken, "netmask") == 0)
{
confToken = strtok(NULL, " ");
ip4_netmask = inet_addr (confToken);
count++;
nNext = 1;
}
else if (strcmp(confToken, "broadcast") == 0)
{
confToken = strtok(NULL, " ");
count++;
bNext = 1;
}
else
{
ip4_address = inet_addr (confToken);
count++;
}
confToken = strtok(NULL, " ");
}
2004-10-13 Dan Williams <dcbw@redhat.com> * panel-applet/NMWirelessApplet.c - Add function to print out applet_state in a readable manner * src/NetworkManager.c - (main): Don't segfault when nm_dbus_init() fails, we had a left-over call to hal_shutdown() into which we passed NULL * src/NetworkManagerAP.c - (nm_ap_set_essid): Allow NULL essids * src/NetworkManagerAPList.[ch] - More use of nm_ap_list_[un]lock () - (nm_ap_list_get_ap_by_essid): don't warn when looking for a NULL network/essid, just return nothing. Also skip over NULL essid access points in the list when searching - (nm_ap_list_get_ap_by_address): new function - (nm_ap_list_update_network): set the access point's key source to NULL when the key returned from NetworkManagerInfo is NULL or of 0 length - nm_ap_list_update_keys() -> nm_ap_list_update_properties(), and copy timestamp over too - (nm_ap_list_copy_essids_by_address): new function, attempt to find the correct ESSID for a blank-essid access point by searching through another list and matching access point MAC addresses - (nm_ap_list_diff): exclude blank-essid access points from the diffs * src/NetworkManagerDbus.c - (nm_dbus_nm_set_active_device): deal with random networks the user may specify. This is mainly for access points that don't broadcast their essid. So if the user tells us to associate with some random ESSID that's not in our access point list, we find out if the access point does in fact exist (by attempting association and then matching that access point's MAC address with the essid the user gave us) and then we switch to it. - (nm_dbus_devices_handle_request): don't add blank-essid access points to the returned list of networks for the "getNetworks" method * src/NetworkManagerDevice.[ch] - Extra debugging info for link detection - (nm_device_ap_list_get_ap_by_address): new function, return an AP based on MAC address - (nm_device_get_path_for_ap): ignore blank-essid access points - (nm_device_wireless_network_exists): new function, find out whether a random ESSID exists by attempting to associate with it - (nm_device_do_normal_scan): allow blank-essid access points in our device list as long as they have an AP MAC address we can use. Also send WirelessNetwork[Dis]Appeared signals for non-active devices too. Lets the applet update more frequently. * src/backends/NetworkManagerGentoo.c - Patch from: Robert Paskowitz - Update backend code for Gentoo - Implement nm_system_device_update_config_info () * test/nmclienttest.c - (set_network_device): new function, takes a command-line argument and tells NetworkManager to use that wireless network git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@222 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2004-10-13 20:57:23 +00:00
}
}
/* If we aren't using dhcp, then try to get the gateway */
if (!use_dhcp)
{
2004-10-13 Dan Williams <dcbw@redhat.com> * panel-applet/NMWirelessApplet.c - Add function to print out applet_state in a readable manner * src/NetworkManager.c - (main): Don't segfault when nm_dbus_init() fails, we had a left-over call to hal_shutdown() into which we passed NULL * src/NetworkManagerAP.c - (nm_ap_set_essid): Allow NULL essids * src/NetworkManagerAPList.[ch] - More use of nm_ap_list_[un]lock () - (nm_ap_list_get_ap_by_essid): don't warn when looking for a NULL network/essid, just return nothing. Also skip over NULL essid access points in the list when searching - (nm_ap_list_get_ap_by_address): new function - (nm_ap_list_update_network): set the access point's key source to NULL when the key returned from NetworkManagerInfo is NULL or of 0 length - nm_ap_list_update_keys() -> nm_ap_list_update_properties(), and copy timestamp over too - (nm_ap_list_copy_essids_by_address): new function, attempt to find the correct ESSID for a blank-essid access point by searching through another list and matching access point MAC addresses - (nm_ap_list_diff): exclude blank-essid access points from the diffs * src/NetworkManagerDbus.c - (nm_dbus_nm_set_active_device): deal with random networks the user may specify. This is mainly for access points that don't broadcast their essid. So if the user tells us to associate with some random ESSID that's not in our access point list, we find out if the access point does in fact exist (by attempting association and then matching that access point's MAC address with the essid the user gave us) and then we switch to it. - (nm_dbus_devices_handle_request): don't add blank-essid access points to the returned list of networks for the "getNetworks" method * src/NetworkManagerDevice.[ch] - Extra debugging info for link detection - (nm_device_ap_list_get_ap_by_address): new function, return an AP based on MAC address - (nm_device_get_path_for_ap): ignore blank-essid access points - (nm_device_wireless_network_exists): new function, find out whether a random ESSID exists by attempting to associate with it - (nm_device_do_normal_scan): allow blank-essid access points in our device list as long as they have an AP MAC address we can use. Also send WirelessNetwork[Dis]Appeared signals for non-active devices too. Lets the applet update more frequently. * src/backends/NetworkManagerGentoo.c - Patch from: Robert Paskowitz - Update backend code for Gentoo - Implement nm_system_device_update_config_info () * test/nmclienttest.c - (set_network_device): new function, takes a command-line argument and tells NetworkManager to use that wireless network git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@222 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2004-10-13 20:57:23 +00:00
sprintf(ipline, "gateway=\"%s/", nm_device_get_iface (dev));
if (strncmp(buffer, ipline, strlen(ipline) - 1) == 0)
{
sprintf(ipline, "gateway=\"%s/%%d.%%d.%%d.%%d\"", nm_device_get_iface (dev) );
sscanf(buffer, ipline, &ipa, &ipb, &ipc, &ipd);
sprintf(ipline, "%d.%d.%d.%d", ipa, ipb, ipc, ipd);
ip4_gateway = inet_addr (ipline);
}
}
}
fclose (file);
g_free (cfg_file_path);
/* If successful, set values on the device */
if (data_good)
{
nm_warning("data good :-)");
nm_device_set_use_dhcp (dev, use_dhcp);
if (ip4_address)
nm_ip4_config_set_address (sys_data->config, ip4_address);
if (ip4_gateway)
nm_ip4_config_set_gateway (sys_data->config, ip4_gateway);
if (ip4_netmask)
nm_ip4_config_set_netmask (sys_data->config, ip4_netmask);
if (ip4_broadcast)
nm_ip4_config_set_broadcast (sys_data->config, ip4_broadcast);
}
return (void *)sys_data;
2004-09-08 Dan Williams <dcbw@redhat.com> * panel-applet/no-networkmanager.png panel-applet/Makefile.am panel-applet/NMWirelessApplet.c - Add a "NetworkManager not running" icon and use it - Use new consolidated GConf keys rather than Preferred/Trusted * TODO: update * info-daemon/NetworkManagerInfo.c info-daemon/NetworkManagerInfoDbus.[ch] info-daemon/NetworkManagerInfoPassphraseDialog.c - There are now no longer two separate lists of wireless networks, but one list where each network is "trusted" or not trusted - Add a "getNetworkTrusted" dbus method - "WirelessNetworkUpdate" signal now sent rather than "PreferredNetworkUpdate/TrustedNetworkUpdate" signals - Start freeing some dbus errors (not completed yet) * info-daemon/passphrase.glade - Remove the "don't show" hints for pager and taskbar - Add a title since its going to be in the taskbar * src/NetworkManager.[ch] src/NetworkManagerAPList.[ch] - There are now no longer two separate lists of wireless networks, but one list where each network is "trusted" or not trusted * src/NetworkManagerAP.[ch] - Add get/set "trusted" accessors and data bit * src/NetworkManagerDbus.[ch] - Add function to get "trusted" status of a network from NetworkManagerInfo - Trap new WirelessNetworkUpdate signal rather than old separate signals * src/NetworkManagerDevice.[ch] - Add per-device config data (ip4 addr, gateway, netmask) and accessors - (nm_device_new): Get device config from backend when initializing devices - (nm_device_activation_worker): Split out device configuration on activation to deal with static/dynamic IP differences, and try encryption fallbacks on a device if the encryption method for the best AP is not good - (nm_device_update_best_ap): convert to new consolidated access point lists from NetworkManagerInfo, and copy over latest NMI info to best_ap when setting it * src/NetworkManagerWireless.c - libgcrypt code wasn't converting the MD5 digest to an ascii string, fix it * src/backends/NetworkManagerRedHat.c src/backends/NetworkManagerSystem.h - (nm_system_device_update_config_info): Add function to get device configuration from system data in ifcfg-* files * src/backends/NetworkManagerDebian.c src/backends/NetworkManagerGentoo.c src/backends/NetworkManagerSlackware.c - Add stub functions for getting device configuration git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@131 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2004-09-08 18:14:42 +00:00
}
/*
* nm_system_device_add_default_route_via_device
*
* Flush all routes associated with a network device
*
*/
void nm_system_device_add_default_route_via_device (NMDevice *dev)
{
g_return_if_fail (dev != NULL);
/* Not really applicable for test devices */
if (nm_device_is_test_device (dev))
return;
nm_system_device_add_default_route_via_device_with_iface (nm_device_get_iface (dev));
}
/*
* nm_system_device_add_default_route_via_device_with_iface
*
* Add default route to the given device
*
*/
void nm_system_device_add_default_route_via_device_with_iface (const char *iface)
{
char *buf;
g_return_if_fail (iface != NULL);
/* Add default gateway */
buf = g_strdup_printf ("/sbin/ip route add default dev %s", iface);
nm_spawn_process (buf);
g_free (buf);
}
void nm_system_device_free_system_config (NMDevice *dev, void *system_config_data)
{
GentooSystemConfigData *sys_data = (GentooSystemConfigData *)system_config_data;
g_return_if_fail (dev != NULL);
if (!sys_data)
return;
if (sys_data->config)
nm_ip4_config_unref (sys_data->config);
}
NMIP4Config *nm_system_device_new_ip4_system_config (NMDevice *dev)
{
GentooSystemConfigData *sys_data;
NMIP4Config *new_config = NULL;
g_return_val_if_fail (dev != NULL, NULL);
if ((sys_data = nm_device_get_system_config_data (dev)))
new_config = nm_ip4_config_copy (sys_data->config);
return new_config;
}
gboolean nm_system_device_get_use_dhcp (NMDevice *dev)
{
GentooSystemConfigData *sys_data;
g_return_val_if_fail (dev != NULL, TRUE);
if ((sys_data = nm_device_get_system_config_data (dev)))
return sys_data->use_dhcp;
return TRUE;
}
/*
* nm_system_device_get_disabled
*
* Return whether the distro-specific system config tells us to use
* dhcp for this device.
*
*/
gboolean nm_system_device_get_disabled (NMDevice *dev)
{
return FALSE;
}
void nm_system_deactivate_all_dialup (GSList *list)
{
}
gboolean nm_system_deactivate_dialup (GSList *list, const char *dialup)
{
return FALSE;
}
gboolean nm_system_activate_dialup (GSList *list, const char *dialup)
{
return FALSE;
}
/*
* nm_system_get_dialup_config
*
* Enumerate dial up options on this system, allocate NMDialUpConfig's,
* fill them out, and return.
*
*/
GSList * nm_system_get_dialup_config (void)
{
return NULL;
}
/*
* nm_system_activate_nis
*
* set up the nis domain and write a yp.conf
*
*/
void nm_system_activate_nis (NMIP4Config *config)
{
}
/*
* nm_system_shutdown_nis
*
* shutdown ypbind
*
*/
void nm_system_shutdown_nis (void)
{
}
/*
* nm_system_set_hostname
*
* set the hostname
*
*/
void nm_system_set_hostname (NMIP4Config *config)
{
}