NetworkManager/src/backends/NetworkManagerGentoo.c

238 lines
5.7 KiB
C
Raw Normal View History

/* NetworkManager -- Network link manager
*
* Dan Williams <dcbw@redhat.com>
* Dan Willemsen <dan@willemsen.us>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* (C) Copyright 2004 Red Hat, Inc.
* (C) Copyright 2004 Dan Willemsen
*/
#include <stdio.h>
#include <sys/types.h>
#include <signal.h>
#include "NetworkManagerSystem.h"
#include "NetworkManagerUtils.h"
typedef enum GENTOOConfType
{
GENTOO_CONF_TYPE_IFCONFIG = 0,
GENTOO_CONF_TYPE_IPROUTE
} GENTOOConfType;
static GENTOOConfType nm_system_gentoo_conf_type;
/*
* nm_system_init
*
* Initializes the distribution-specific system backend
*
*/
void nm_system_init (void)
{
// TODO: autodetect conf type, probably by checking if /sbin/ip exists
nm_system_gentoo_conf_type = GENTOO_CONF_TYPE_IPROUTE;
}
/*
* nm_system_device_run_dhcp
*
* Run the dhcp daemon for a particular interface.
*
* Returns: TRUE on success
* FALSE on dhcp error
*
*/
gboolean nm_system_device_run_dhcp (NMDevice *dev)
{
char buf [500];
char *iface;
int err;
g_return_val_if_fail (dev != NULL, FALSE);
2004-08-31 Dan Williams <dcbw@redhat.com> * Remove 'debug' extern global from all files since we now use syslog() * src/NetworkManager.[ch] - Break out routine that get the net.interface property from HAL, removing that logic from nm_create_device_and_add_to_list() - (nm_create_device_and_add_to_list): make this a bit more general so it doesn't do the talking to HAL. Also add arguments to facilitate the create of test devices. - (nm_data_mark_state_changed): rename from nm_data_set_state_modified() - (nm_data_new, main, nm_print_usage): add new argument "--enable-test-devices" which makes NetworkManager listen for dbus commands to create test devices, which have no backing hardware. Use when you're on a plane for example, and/or forgot your wireless card at home. Test devices _cannot_ be created unless NM is started with --enable-test-devices. * src/NetworkManagerDbus.[ch] - New "getLinkActive" method for devices - New "setLinkActive" method for devices (only works on test devices) - New "createTestDevice" method on NetworkManager object to create a test device of a specified type (ie wired, wireless). UDI is created from scratch, as is the interface name. Only works when NM is started with --enable-test-devices switch. - New "removeTestDevice" method on NetworkManager object which removes a test device. Only works when NM is started with --enable-test-devices * src/NetworkManagerDevice.[ch] - Logic to facilitate test devices. Add variables to NMDevice struct to indicate whether a device is a test device or not, and what its link status is. - Deal with test devices in most functions. For those that work directly on hardware special-case test devices. - (nm_device_new): don't create a test device if test devices weren't enabled on the command-line. - (nm_device_update_link_active): split out logic for wired and wireless device link checking to separate functions to facilitate test device link checking. - (nm_device_set_enc_key): Since some drivers for wireless cards are daft and don't make a distinction between System Authentication and Encryption (namely Cisco aironet), we use Open System auth when setting a WEP key on the card. We don't deal with Shared Key auth yet. - (nm_device_activation_worker): split the activation cancel check logic out into a separate routine nm_device_activation_cancel_if_needed() - (nm_device_activation_signal_cancel): rename from nm_device_activation_cancel() - (nm_device_fake_ap_list): Test wireless devices obviously cannot scan, so create a list of fake access points that they can "see" - (nm_device_is_test_device): return whether or not a device is a test device * src/NetworkManagerPolicy.c - (nm_policy_get_best_device): attempt to deal with wireless network selection, previously if you "locked"/forced NM to use a wireless device but then selected a wireless network for NM to use, it would switch to a wired device. So, if the active device is wireless and it has a "forced" best AP, use it if the "forced" best AP is still valid - (nm_state_modification_monitor): deal with NULL best devices, for example there were no usable network devices, or the last one was removed * src/backends/NetworkManager*.c - Deal with test devices, mostly just return success for operations like getting a DHCP address * test/nmtestdevices.c - Test tool to create/remove/link-switch test devices git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@112 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2004-08-31 16:09:15 +00:00
/* Fake it for a test device */
if (nm_device_is_test_device (dev))
{
g_usleep (2000);
return (TRUE);
}
iface = nm_device_get_iface (dev);
snprintf (buf, 500, "/sbin/dhcpcd %s", iface);
err = nm_spawn_process (buf);
return (err == 0);
}
/*
* nm_system_device_stop_dhcp
*
* Kill any dhcp daemon that happens to be around. We may be changing
* interfaces and we're going to bring the previous one down, so there's
* no sense in keeping the dhcp daemon running on the old interface.
*
*/
void nm_system_device_stop_dhcp (NMDevice *dev)
{
FILE *pidfile;
char buf [500];
g_return_if_fail (dev != NULL);
2004-08-31 Dan Williams <dcbw@redhat.com> * Remove 'debug' extern global from all files since we now use syslog() * src/NetworkManager.[ch] - Break out routine that get the net.interface property from HAL, removing that logic from nm_create_device_and_add_to_list() - (nm_create_device_and_add_to_list): make this a bit more general so it doesn't do the talking to HAL. Also add arguments to facilitate the create of test devices. - (nm_data_mark_state_changed): rename from nm_data_set_state_modified() - (nm_data_new, main, nm_print_usage): add new argument "--enable-test-devices" which makes NetworkManager listen for dbus commands to create test devices, which have no backing hardware. Use when you're on a plane for example, and/or forgot your wireless card at home. Test devices _cannot_ be created unless NM is started with --enable-test-devices. * src/NetworkManagerDbus.[ch] - New "getLinkActive" method for devices - New "setLinkActive" method for devices (only works on test devices) - New "createTestDevice" method on NetworkManager object to create a test device of a specified type (ie wired, wireless). UDI is created from scratch, as is the interface name. Only works when NM is started with --enable-test-devices switch. - New "removeTestDevice" method on NetworkManager object which removes a test device. Only works when NM is started with --enable-test-devices * src/NetworkManagerDevice.[ch] - Logic to facilitate test devices. Add variables to NMDevice struct to indicate whether a device is a test device or not, and what its link status is. - Deal with test devices in most functions. For those that work directly on hardware special-case test devices. - (nm_device_new): don't create a test device if test devices weren't enabled on the command-line. - (nm_device_update_link_active): split out logic for wired and wireless device link checking to separate functions to facilitate test device link checking. - (nm_device_set_enc_key): Since some drivers for wireless cards are daft and don't make a distinction between System Authentication and Encryption (namely Cisco aironet), we use Open System auth when setting a WEP key on the card. We don't deal with Shared Key auth yet. - (nm_device_activation_worker): split the activation cancel check logic out into a separate routine nm_device_activation_cancel_if_needed() - (nm_device_activation_signal_cancel): rename from nm_device_activation_cancel() - (nm_device_fake_ap_list): Test wireless devices obviously cannot scan, so create a list of fake access points that they can "see" - (nm_device_is_test_device): return whether or not a device is a test device * src/NetworkManagerPolicy.c - (nm_policy_get_best_device): attempt to deal with wireless network selection, previously if you "locked"/forced NM to use a wireless device but then selected a wireless network for NM to use, it would switch to a wired device. So, if the active device is wireless and it has a "forced" best AP, use it if the "forced" best AP is still valid - (nm_state_modification_monitor): deal with NULL best devices, for example there were no usable network devices, or the last one was removed * src/backends/NetworkManager*.c - Deal with test devices, mostly just return success for operations like getting a DHCP address * test/nmtestdevices.c - Test tool to create/remove/link-switch test devices git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@112 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2004-08-31 16:09:15 +00:00
/* Not really applicable for test devices */
if (nm_device_is_test_device (dev))
return;
snprintf (buf, 500, "/var/run/dhcpcd-%s.pid", nm_device_get_iface(dev));
pidfile = fopen (buf, "r");
if (pidfile)
{
int len;
unsigned char s_pid[20];
pid_t n_pid = -1;
memset (s_pid, 0, 20);
fgets (s_pid, 19, pidfile);
len = strnlen (s_pid, 20);
fclose (pidfile);
n_pid = atoi (s_pid);
if (n_pid > 0)
kill (n_pid, SIGTERM);
}
}
/*
* nm_system_device_flush_routes
*
* Flush all routes associated with a network device
*
*/
void nm_system_device_flush_routes (NMDevice *dev)
{
char buf [100];
g_return_if_fail (dev != NULL);
2004-08-31 Dan Williams <dcbw@redhat.com> * Remove 'debug' extern global from all files since we now use syslog() * src/NetworkManager.[ch] - Break out routine that get the net.interface property from HAL, removing that logic from nm_create_device_and_add_to_list() - (nm_create_device_and_add_to_list): make this a bit more general so it doesn't do the talking to HAL. Also add arguments to facilitate the create of test devices. - (nm_data_mark_state_changed): rename from nm_data_set_state_modified() - (nm_data_new, main, nm_print_usage): add new argument "--enable-test-devices" which makes NetworkManager listen for dbus commands to create test devices, which have no backing hardware. Use when you're on a plane for example, and/or forgot your wireless card at home. Test devices _cannot_ be created unless NM is started with --enable-test-devices. * src/NetworkManagerDbus.[ch] - New "getLinkActive" method for devices - New "setLinkActive" method for devices (only works on test devices) - New "createTestDevice" method on NetworkManager object to create a test device of a specified type (ie wired, wireless). UDI is created from scratch, as is the interface name. Only works when NM is started with --enable-test-devices switch. - New "removeTestDevice" method on NetworkManager object which removes a test device. Only works when NM is started with --enable-test-devices * src/NetworkManagerDevice.[ch] - Logic to facilitate test devices. Add variables to NMDevice struct to indicate whether a device is a test device or not, and what its link status is. - Deal with test devices in most functions. For those that work directly on hardware special-case test devices. - (nm_device_new): don't create a test device if test devices weren't enabled on the command-line. - (nm_device_update_link_active): split out logic for wired and wireless device link checking to separate functions to facilitate test device link checking. - (nm_device_set_enc_key): Since some drivers for wireless cards are daft and don't make a distinction between System Authentication and Encryption (namely Cisco aironet), we use Open System auth when setting a WEP key on the card. We don't deal with Shared Key auth yet. - (nm_device_activation_worker): split the activation cancel check logic out into a separate routine nm_device_activation_cancel_if_needed() - (nm_device_activation_signal_cancel): rename from nm_device_activation_cancel() - (nm_device_fake_ap_list): Test wireless devices obviously cannot scan, so create a list of fake access points that they can "see" - (nm_device_is_test_device): return whether or not a device is a test device * src/NetworkManagerPolicy.c - (nm_policy_get_best_device): attempt to deal with wireless network selection, previously if you "locked"/forced NM to use a wireless device but then selected a wireless network for NM to use, it would switch to a wired device. So, if the active device is wireless and it has a "forced" best AP, use it if the "forced" best AP is still valid - (nm_state_modification_monitor): deal with NULL best devices, for example there were no usable network devices, or the last one was removed * src/backends/NetworkManager*.c - Deal with test devices, mostly just return success for operations like getting a DHCP address * test/nmtestdevices.c - Test tool to create/remove/link-switch test devices git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@112 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2004-08-31 16:09:15 +00:00
/* Not really applicable for test devices */
if (nm_device_is_test_device (dev))
return;
if (nm_system_gentoo_conf_type == GENTOO_CONF_TYPE_IPROUTE) {
snprintf (buf, 100, "/sbin/ip route flush dev %s", nm_device_get_iface (dev));
} else if (nm_system_gentoo_conf_type == GENTOO_CONF_TYPE_IFCONFIG) {
// FIXME: this command still isn't right
2004-08-31 Dan Williams <dcbw@redhat.com> * Remove 'debug' extern global from all files since we now use syslog() * src/NetworkManager.[ch] - Break out routine that get the net.interface property from HAL, removing that logic from nm_create_device_and_add_to_list() - (nm_create_device_and_add_to_list): make this a bit more general so it doesn't do the talking to HAL. Also add arguments to facilitate the create of test devices. - (nm_data_mark_state_changed): rename from nm_data_set_state_modified() - (nm_data_new, main, nm_print_usage): add new argument "--enable-test-devices" which makes NetworkManager listen for dbus commands to create test devices, which have no backing hardware. Use when you're on a plane for example, and/or forgot your wireless card at home. Test devices _cannot_ be created unless NM is started with --enable-test-devices. * src/NetworkManagerDbus.[ch] - New "getLinkActive" method for devices - New "setLinkActive" method for devices (only works on test devices) - New "createTestDevice" method on NetworkManager object to create a test device of a specified type (ie wired, wireless). UDI is created from scratch, as is the interface name. Only works when NM is started with --enable-test-devices switch. - New "removeTestDevice" method on NetworkManager object which removes a test device. Only works when NM is started with --enable-test-devices * src/NetworkManagerDevice.[ch] - Logic to facilitate test devices. Add variables to NMDevice struct to indicate whether a device is a test device or not, and what its link status is. - Deal with test devices in most functions. For those that work directly on hardware special-case test devices. - (nm_device_new): don't create a test device if test devices weren't enabled on the command-line. - (nm_device_update_link_active): split out logic for wired and wireless device link checking to separate functions to facilitate test device link checking. - (nm_device_set_enc_key): Since some drivers for wireless cards are daft and don't make a distinction between System Authentication and Encryption (namely Cisco aironet), we use Open System auth when setting a WEP key on the card. We don't deal with Shared Key auth yet. - (nm_device_activation_worker): split the activation cancel check logic out into a separate routine nm_device_activation_cancel_if_needed() - (nm_device_activation_signal_cancel): rename from nm_device_activation_cancel() - (nm_device_fake_ap_list): Test wireless devices obviously cannot scan, so create a list of fake access points that they can "see" - (nm_device_is_test_device): return whether or not a device is a test device * src/NetworkManagerPolicy.c - (nm_policy_get_best_device): attempt to deal with wireless network selection, previously if you "locked"/forced NM to use a wireless device but then selected a wireless network for NM to use, it would switch to a wired device. So, if the active device is wireless and it has a "forced" best AP, use it if the "forced" best AP is still valid - (nm_state_modification_monitor): deal with NULL best devices, for example there were no usable network devices, or the last one was removed * src/backends/NetworkManager*.c - Deal with test devices, mostly just return success for operations like getting a DHCP address * test/nmtestdevices.c - Test tool to create/remove/link-switch test devices git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@112 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2004-08-31 16:09:15 +00:00
snprintf (buf, 100, "/sbin/route del dev %s", nm_device_get_iface (dev));
} else {
snprintf (buf, 100, "/bin/false");
}
nm_spawn_process (buf);
}
/*
* nm_system_device_flush_addresses
*
* Flush all network addresses associated with a network device
*
*/
void nm_system_device_flush_addresses (NMDevice *dev)
{
char buf [100];
g_return_if_fail (dev != NULL);
2004-08-31 Dan Williams <dcbw@redhat.com> * Remove 'debug' extern global from all files since we now use syslog() * src/NetworkManager.[ch] - Break out routine that get the net.interface property from HAL, removing that logic from nm_create_device_and_add_to_list() - (nm_create_device_and_add_to_list): make this a bit more general so it doesn't do the talking to HAL. Also add arguments to facilitate the create of test devices. - (nm_data_mark_state_changed): rename from nm_data_set_state_modified() - (nm_data_new, main, nm_print_usage): add new argument "--enable-test-devices" which makes NetworkManager listen for dbus commands to create test devices, which have no backing hardware. Use when you're on a plane for example, and/or forgot your wireless card at home. Test devices _cannot_ be created unless NM is started with --enable-test-devices. * src/NetworkManagerDbus.[ch] - New "getLinkActive" method for devices - New "setLinkActive" method for devices (only works on test devices) - New "createTestDevice" method on NetworkManager object to create a test device of a specified type (ie wired, wireless). UDI is created from scratch, as is the interface name. Only works when NM is started with --enable-test-devices switch. - New "removeTestDevice" method on NetworkManager object which removes a test device. Only works when NM is started with --enable-test-devices * src/NetworkManagerDevice.[ch] - Logic to facilitate test devices. Add variables to NMDevice struct to indicate whether a device is a test device or not, and what its link status is. - Deal with test devices in most functions. For those that work directly on hardware special-case test devices. - (nm_device_new): don't create a test device if test devices weren't enabled on the command-line. - (nm_device_update_link_active): split out logic for wired and wireless device link checking to separate functions to facilitate test device link checking. - (nm_device_set_enc_key): Since some drivers for wireless cards are daft and don't make a distinction between System Authentication and Encryption (namely Cisco aironet), we use Open System auth when setting a WEP key on the card. We don't deal with Shared Key auth yet. - (nm_device_activation_worker): split the activation cancel check logic out into a separate routine nm_device_activation_cancel_if_needed() - (nm_device_activation_signal_cancel): rename from nm_device_activation_cancel() - (nm_device_fake_ap_list): Test wireless devices obviously cannot scan, so create a list of fake access points that they can "see" - (nm_device_is_test_device): return whether or not a device is a test device * src/NetworkManagerPolicy.c - (nm_policy_get_best_device): attempt to deal with wireless network selection, previously if you "locked"/forced NM to use a wireless device but then selected a wireless network for NM to use, it would switch to a wired device. So, if the active device is wireless and it has a "forced" best AP, use it if the "forced" best AP is still valid - (nm_state_modification_monitor): deal with NULL best devices, for example there were no usable network devices, or the last one was removed * src/backends/NetworkManager*.c - Deal with test devices, mostly just return success for operations like getting a DHCP address * test/nmtestdevices.c - Test tool to create/remove/link-switch test devices git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@112 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2004-08-31 16:09:15 +00:00
/* Not really applicable for test devices */
if (nm_device_is_test_device (dev))
return;
if (nm_system_gentoo_conf_type == GENTOO_CONF_TYPE_IPROUTE) {
snprintf (buf, 100, "/sbin/ip address flush dev %s", nm_device_get_iface (dev));
} else if (nm_system_gentoo_conf_type == GENTOO_CONF_TYPE_IFCONFIG) {
// FIXME: find the correct command
snprintf (buf, 100, "/bin/false");
} else {
snprintf (buf, 100, "/bin/false");
}
nm_spawn_process (buf);
}
/*
* nm_system_enable_loopback
*
* Bring up the loopback interface
*
*/
void nm_system_enable_loopback (void)
{
if (nm_system_gentoo_conf_type == GENTOO_CONF_TYPE_IPROUTE) {
nm_spawn_process ("/sbin/ip link set dev lo up");
nm_spawn_process ("/sbin/ip addr add 127.0.0.1/8 brd 127.255.255.255 dev lo label loopback");
} else if (nm_system_gentoo_conf_type == GENTOO_CONF_TYPE_IFCONFIG) {
nm_spawn_process ("/sbin/ifconfig lo 127.0.0.1 up");
nm_spawn_process ("/sbin/route add -net 127.0.0.0 netmask 255.0.0.0 gw 127.0.0.1 dev lo");
}
}
/*
* nm_system_delete_default_route
*
* Remove the old default route in preparation for a new one
*
*/
void nm_system_delete_default_route (void)
{
if (nm_system_gentoo_conf_type == GENTOO_CONF_TYPE_IPROUTE) {
nm_spawn_process ("/sbin/ip route del default");
} else if (nm_system_gentoo_conf_type == GENTOO_CONF_TYPE_IFCONFIG) {
nm_spawn_process ("/sbin/route del default");
}
}
/*
* nm_system_kill_all_dhcp_daemons
*
* Kill all DHCP daemons currently running, done at startup
*
*/
void nm_system_kill_all_dhcp_daemons (void)
{
nm_spawn_process ("/usr/bin/killall -q dhcpcd");
}
/*
* nm_system_update_dns
*
* Make glibc/nscd aware of any changes to the resolv.conf file by
* restarting nscd. Only restart if already running.
*
*/
void nm_system_update_dns (void)
{
if(nm_spawn_process ("/etc/init.d/nscd status"))
nm_spawn_process ("/etc/init.d/nscd restart");
}
/*
* nm_system_load_device_modules
*
* Loads any network adapter kernel modules, these should already be loaded
* by /etc/modules.autoload.d/kernel-2.x
*
*/
void nm_system_load_device_modules (void)
{
}