NetworkManager/libnm-core/nm-setting-ip6-config.c

611 lines
20 KiB
C
Raw Normal View History

/* -*- Mode: C; tab-width: 4; indent-tabs-mode: t; c-basic-offset: 4 -*- */
/*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the
* Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
* Boston, MA 02110-1301 USA.
*
* Copyright 2007 - 2014 Red Hat, Inc.
*/
#include "config.h"
#include <string.h>
#include <glib/gi18n-lib.h>
#include "nm-setting-ip6-config.h"
#include "nm-setting-private.h"
#include "nm-core-enum-types.h"
/**
* SECTION:nm-setting-ip6-config
* @short_description: Describes IPv6 addressing, routing, and name service properties
*
* The #NMSettingIP6Config object is a #NMSetting subclass that describes
* properties related to IPv6 addressing, routing, and Domain Name Service
*
* #NMSettingIP6Config has few properties or methods of its own; it inherits
* almost everything from #NMSettingIPConfig.
*
* NetworkManager supports 6 values for the #NMSettingIPConfig:method property
* for IPv6. If "auto" is specified then the appropriate automatic method (PPP,
* router advertisement, etc) is used for the device and most other properties
* can be left unset. To force the use of DHCP only, specify "dhcp"; this
* method is only valid for Ethernet- based hardware. If "link-local" is
* specified, then an IPv6 link-local address will be assigned to the interface.
* If "manual" is specified, static IP addressing is used and at least one IP
* address must be given in the "addresses" property. If "ignore" is specified,
* IPv6 configuration is not done. Note: the "shared" method is not yet
* supported.
**/
G_DEFINE_TYPE_WITH_CODE (NMSettingIP6Config, nm_setting_ip6_config, NM_TYPE_SETTING_IP_CONFIG,
_nm_register_setting (IP6_CONFIG, 4))
NM_SETTING_REGISTER_TYPE (NM_TYPE_SETTING_IP6_CONFIG)
#define NM_SETTING_IP6_CONFIG_GET_PRIVATE(o) (G_TYPE_INSTANCE_GET_PRIVATE ((o), NM_TYPE_SETTING_IP6_CONFIG, NMSettingIP6ConfigPrivate))
typedef struct {
NMSettingIP6ConfigPrivacy ip6_privacy;
} NMSettingIP6ConfigPrivate;
enum {
PROP_0,
PROP_IP6_PRIVACY,
LAST_PROP
};
/**
* nm_setting_ip6_config_new:
*
* Creates a new #NMSettingIP6Config object with default values.
*
* Returns: (transfer full): the new empty #NMSettingIP6Config object
**/
NMSetting *
nm_setting_ip6_config_new (void)
{
return (NMSetting *) g_object_new (NM_TYPE_SETTING_IP6_CONFIG, NULL);
}
/**
* nm_setting_ip6_config_get_ip6_privacy:
* @setting: the #NMSettingIP6Config
*
* Returns the value contained in the #NMSettingIP6Config:ip6-privacy
* property.
*
* Returns: IPv6 Privacy Extensions configuration value (#NMSettingIP6ConfigPrivacy).
**/
NMSettingIP6ConfigPrivacy
nm_setting_ip6_config_get_ip6_privacy (NMSettingIP6Config *setting)
{
g_return_val_if_fail (NM_IS_SETTING_IP6_CONFIG (setting), NM_SETTING_IP6_CONFIG_PRIVACY_UNKNOWN);
return NM_SETTING_IP6_CONFIG_GET_PRIVATE (setting)->ip6_privacy;
}
static gboolean
verify (NMSetting *setting, NMConnection *connection, GError **error)
{
NMSettingIPConfig *s_ip = NM_SETTING_IP_CONFIG (setting);
NMSettingVerifyResult ret;
const char *method;
ret = NM_SETTING_CLASS (nm_setting_ip6_config_parent_class)->verify (setting, connection, error);
if (ret != NM_SETTING_VERIFY_SUCCESS)
return ret;
method = nm_setting_ip_config_get_method (s_ip);
/* Base class already checked that it exists */
g_assert (method);
if (!strcmp (method, NM_SETTING_IP6_CONFIG_METHOD_MANUAL)) {
if (nm_setting_ip_config_get_num_addresses (s_ip) == 0) {
g_set_error (error,
libnm-core: merge NMSetting*Error into NMConnectionError Each setting type was defining its own error type, but most of them had exactly the same three errors ("unknown", "missing property", and "invalid property"), and none of the other values was of much use programmatically anyway. So, this commit merges NMSettingError, NMSettingAdslError, etc, all into NMConnectionError. (The reason for merging into NMConnectionError rather than NMSettingError is that we also already have "NMSettingsError", for errors related to the settings service, so "NMConnectionError" is a less-confusable name for settings/connection errors than "NMSettingError".) Also, make sure that all of the affected error messages are localized, and (where appropriate) prefix them with the relevant property name. Renamed error codes: NM_SETTING_ERROR_PROPERTY_NOT_FOUND -> NM_CONNECTION_ERROR_PROPERTY_NOT_FOUND NM_SETTING_ERROR_PROPERTY_NOT_SECRET -> NM_CONNECTION_ERROR_PROPERTY_NOT_SECRET Remapped error codes: NM_SETTING_*_ERROR_MISSING_PROPERTY -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_*_ERROR_INVALID_PROPERTY -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_ERROR_PROPERTY_TYPE_MISMATCH -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_BLUETOOTH_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_INVALID_SETTING NM_SETTING_BOND_ERROR_INVALID_OPTION -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_BOND_ERROR_MISSING_OPTION -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_CONNECTION_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_CONNECTION_ERROR_SLAVE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_IP4_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_IP6_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_VLAN_ERROR_INVALID_PARENT -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_MISSING_802_1X_SETTING -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_802_1X -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_USERNAME -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_SHARED_KEY_REQUIRES_WEP -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_ERROR_CHANNEL_REQUIRES_BAND -> NM_CONNECTION_ERROR_MISSING_PROPERTY Dropped error codes (were previously defined but unused): NM_SETTING_CDMA_ERROR_MISSING_SERIAL_SETTING NM_SETTING_CONNECTION_ERROR_IP_CONFIG_NOT_ALLOWED NM_SETTING_GSM_ERROR_MISSING_SERIAL_SETTING NM_SETTING_PPP_ERROR_REQUIRE_MPPE_NOT_ALLOWED NM_SETTING_PPPOE_ERROR_MISSING_PPP_SETTING NM_SETTING_SERIAL_ERROR_MISSING_PPP_SETTING NM_SETTING_WIRELESS_ERROR_MISSING_SECURITY_SETTING
2014-10-20 13:52:23 -04:00
NM_CONNECTION_ERROR,
NM_CONNECTION_ERROR_MISSING_PROPERTY,
_("this property cannot be empty for '%s=%s'"),
NM_SETTING_IP_CONFIG_METHOD, method);
g_prefix_error (error, "%s.%s: ", NM_SETTING_IP6_CONFIG_SETTING_NAME, NM_SETTING_IP_CONFIG_ADDRESSES);
return FALSE;
}
} else if ( !strcmp (method, NM_SETTING_IP6_CONFIG_METHOD_IGNORE)
|| !strcmp (method, NM_SETTING_IP6_CONFIG_METHOD_LINK_LOCAL)
|| !strcmp (method, NM_SETTING_IP6_CONFIG_METHOD_SHARED)) {
if (nm_setting_ip_config_get_num_dns (s_ip) > 0) {
g_set_error (error,
libnm-core: merge NMSetting*Error into NMConnectionError Each setting type was defining its own error type, but most of them had exactly the same three errors ("unknown", "missing property", and "invalid property"), and none of the other values was of much use programmatically anyway. So, this commit merges NMSettingError, NMSettingAdslError, etc, all into NMConnectionError. (The reason for merging into NMConnectionError rather than NMSettingError is that we also already have "NMSettingsError", for errors related to the settings service, so "NMConnectionError" is a less-confusable name for settings/connection errors than "NMSettingError".) Also, make sure that all of the affected error messages are localized, and (where appropriate) prefix them with the relevant property name. Renamed error codes: NM_SETTING_ERROR_PROPERTY_NOT_FOUND -> NM_CONNECTION_ERROR_PROPERTY_NOT_FOUND NM_SETTING_ERROR_PROPERTY_NOT_SECRET -> NM_CONNECTION_ERROR_PROPERTY_NOT_SECRET Remapped error codes: NM_SETTING_*_ERROR_MISSING_PROPERTY -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_*_ERROR_INVALID_PROPERTY -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_ERROR_PROPERTY_TYPE_MISMATCH -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_BLUETOOTH_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_INVALID_SETTING NM_SETTING_BOND_ERROR_INVALID_OPTION -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_BOND_ERROR_MISSING_OPTION -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_CONNECTION_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_CONNECTION_ERROR_SLAVE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_IP4_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_IP6_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_VLAN_ERROR_INVALID_PARENT -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_MISSING_802_1X_SETTING -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_802_1X -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_USERNAME -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_SHARED_KEY_REQUIRES_WEP -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_ERROR_CHANNEL_REQUIRES_BAND -> NM_CONNECTION_ERROR_MISSING_PROPERTY Dropped error codes (were previously defined but unused): NM_SETTING_CDMA_ERROR_MISSING_SERIAL_SETTING NM_SETTING_CONNECTION_ERROR_IP_CONFIG_NOT_ALLOWED NM_SETTING_GSM_ERROR_MISSING_SERIAL_SETTING NM_SETTING_PPP_ERROR_REQUIRE_MPPE_NOT_ALLOWED NM_SETTING_PPPOE_ERROR_MISSING_PPP_SETTING NM_SETTING_SERIAL_ERROR_MISSING_PPP_SETTING NM_SETTING_WIRELESS_ERROR_MISSING_SECURITY_SETTING
2014-10-20 13:52:23 -04:00
NM_CONNECTION_ERROR,
NM_CONNECTION_ERROR_INVALID_PROPERTY,
_("'%s' not allowed for %s=%s"),
_("this property is not allowed for '%s=%s'"),
NM_SETTING_IP_CONFIG_METHOD, method);
g_prefix_error (error, "%s.%s: ", NM_SETTING_IP6_CONFIG_SETTING_NAME, NM_SETTING_IP_CONFIG_DNS);
return FALSE;
}
if (nm_setting_ip_config_get_num_dns_searches (s_ip) > 0) {
g_set_error (error,
libnm-core: merge NMSetting*Error into NMConnectionError Each setting type was defining its own error type, but most of them had exactly the same three errors ("unknown", "missing property", and "invalid property"), and none of the other values was of much use programmatically anyway. So, this commit merges NMSettingError, NMSettingAdslError, etc, all into NMConnectionError. (The reason for merging into NMConnectionError rather than NMSettingError is that we also already have "NMSettingsError", for errors related to the settings service, so "NMConnectionError" is a less-confusable name for settings/connection errors than "NMSettingError".) Also, make sure that all of the affected error messages are localized, and (where appropriate) prefix them with the relevant property name. Renamed error codes: NM_SETTING_ERROR_PROPERTY_NOT_FOUND -> NM_CONNECTION_ERROR_PROPERTY_NOT_FOUND NM_SETTING_ERROR_PROPERTY_NOT_SECRET -> NM_CONNECTION_ERROR_PROPERTY_NOT_SECRET Remapped error codes: NM_SETTING_*_ERROR_MISSING_PROPERTY -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_*_ERROR_INVALID_PROPERTY -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_ERROR_PROPERTY_TYPE_MISMATCH -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_BLUETOOTH_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_INVALID_SETTING NM_SETTING_BOND_ERROR_INVALID_OPTION -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_BOND_ERROR_MISSING_OPTION -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_CONNECTION_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_CONNECTION_ERROR_SLAVE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_IP4_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_IP6_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_VLAN_ERROR_INVALID_PARENT -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_MISSING_802_1X_SETTING -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_802_1X -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_USERNAME -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_SHARED_KEY_REQUIRES_WEP -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_ERROR_CHANNEL_REQUIRES_BAND -> NM_CONNECTION_ERROR_MISSING_PROPERTY Dropped error codes (were previously defined but unused): NM_SETTING_CDMA_ERROR_MISSING_SERIAL_SETTING NM_SETTING_CONNECTION_ERROR_IP_CONFIG_NOT_ALLOWED NM_SETTING_GSM_ERROR_MISSING_SERIAL_SETTING NM_SETTING_PPP_ERROR_REQUIRE_MPPE_NOT_ALLOWED NM_SETTING_PPPOE_ERROR_MISSING_PPP_SETTING NM_SETTING_SERIAL_ERROR_MISSING_PPP_SETTING NM_SETTING_WIRELESS_ERROR_MISSING_SECURITY_SETTING
2014-10-20 13:52:23 -04:00
NM_CONNECTION_ERROR,
NM_CONNECTION_ERROR_INVALID_PROPERTY,
_("this property is not allowed for '%s=%s'"),
NM_SETTING_IP_CONFIG_METHOD, method);
g_prefix_error (error, "%s.%s: ", NM_SETTING_IP6_CONFIG_SETTING_NAME, NM_SETTING_IP_CONFIG_DNS_SEARCH);
return FALSE;
}
if (nm_setting_ip_config_get_num_addresses (s_ip) > 0) {
g_set_error (error,
libnm-core: merge NMSetting*Error into NMConnectionError Each setting type was defining its own error type, but most of them had exactly the same three errors ("unknown", "missing property", and "invalid property"), and none of the other values was of much use programmatically anyway. So, this commit merges NMSettingError, NMSettingAdslError, etc, all into NMConnectionError. (The reason for merging into NMConnectionError rather than NMSettingError is that we also already have "NMSettingsError", for errors related to the settings service, so "NMConnectionError" is a less-confusable name for settings/connection errors than "NMSettingError".) Also, make sure that all of the affected error messages are localized, and (where appropriate) prefix them with the relevant property name. Renamed error codes: NM_SETTING_ERROR_PROPERTY_NOT_FOUND -> NM_CONNECTION_ERROR_PROPERTY_NOT_FOUND NM_SETTING_ERROR_PROPERTY_NOT_SECRET -> NM_CONNECTION_ERROR_PROPERTY_NOT_SECRET Remapped error codes: NM_SETTING_*_ERROR_MISSING_PROPERTY -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_*_ERROR_INVALID_PROPERTY -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_ERROR_PROPERTY_TYPE_MISMATCH -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_BLUETOOTH_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_INVALID_SETTING NM_SETTING_BOND_ERROR_INVALID_OPTION -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_BOND_ERROR_MISSING_OPTION -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_CONNECTION_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_CONNECTION_ERROR_SLAVE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_IP4_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_IP6_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_VLAN_ERROR_INVALID_PARENT -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_MISSING_802_1X_SETTING -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_802_1X -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_USERNAME -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_SHARED_KEY_REQUIRES_WEP -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_ERROR_CHANNEL_REQUIRES_BAND -> NM_CONNECTION_ERROR_MISSING_PROPERTY Dropped error codes (were previously defined but unused): NM_SETTING_CDMA_ERROR_MISSING_SERIAL_SETTING NM_SETTING_CONNECTION_ERROR_IP_CONFIG_NOT_ALLOWED NM_SETTING_GSM_ERROR_MISSING_SERIAL_SETTING NM_SETTING_PPP_ERROR_REQUIRE_MPPE_NOT_ALLOWED NM_SETTING_PPPOE_ERROR_MISSING_PPP_SETTING NM_SETTING_SERIAL_ERROR_MISSING_PPP_SETTING NM_SETTING_WIRELESS_ERROR_MISSING_SECURITY_SETTING
2014-10-20 13:52:23 -04:00
NM_CONNECTION_ERROR,
NM_CONNECTION_ERROR_INVALID_PROPERTY,
_("this property is not allowed for '%s=%s'"),
NM_SETTING_IP_CONFIG_METHOD, method);
g_prefix_error (error, "%s.%s: ", NM_SETTING_IP6_CONFIG_SETTING_NAME, NM_SETTING_IP_CONFIG_ADDRESSES);
return FALSE;
}
} else if ( !strcmp (method, NM_SETTING_IP6_CONFIG_METHOD_AUTO)
|| !strcmp (method, NM_SETTING_IP6_CONFIG_METHOD_DHCP)) {
/* nothing to do */
} else {
g_set_error_literal (error,
libnm-core: merge NMSetting*Error into NMConnectionError Each setting type was defining its own error type, but most of them had exactly the same three errors ("unknown", "missing property", and "invalid property"), and none of the other values was of much use programmatically anyway. So, this commit merges NMSettingError, NMSettingAdslError, etc, all into NMConnectionError. (The reason for merging into NMConnectionError rather than NMSettingError is that we also already have "NMSettingsError", for errors related to the settings service, so "NMConnectionError" is a less-confusable name for settings/connection errors than "NMSettingError".) Also, make sure that all of the affected error messages are localized, and (where appropriate) prefix them with the relevant property name. Renamed error codes: NM_SETTING_ERROR_PROPERTY_NOT_FOUND -> NM_CONNECTION_ERROR_PROPERTY_NOT_FOUND NM_SETTING_ERROR_PROPERTY_NOT_SECRET -> NM_CONNECTION_ERROR_PROPERTY_NOT_SECRET Remapped error codes: NM_SETTING_*_ERROR_MISSING_PROPERTY -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_*_ERROR_INVALID_PROPERTY -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_ERROR_PROPERTY_TYPE_MISMATCH -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_BLUETOOTH_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_INVALID_SETTING NM_SETTING_BOND_ERROR_INVALID_OPTION -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_BOND_ERROR_MISSING_OPTION -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_CONNECTION_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_CONNECTION_ERROR_SLAVE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_IP4_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_IP6_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_VLAN_ERROR_INVALID_PARENT -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_MISSING_802_1X_SETTING -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_802_1X -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_USERNAME -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_SHARED_KEY_REQUIRES_WEP -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_ERROR_CHANNEL_REQUIRES_BAND -> NM_CONNECTION_ERROR_MISSING_PROPERTY Dropped error codes (were previously defined but unused): NM_SETTING_CDMA_ERROR_MISSING_SERIAL_SETTING NM_SETTING_CONNECTION_ERROR_IP_CONFIG_NOT_ALLOWED NM_SETTING_GSM_ERROR_MISSING_SERIAL_SETTING NM_SETTING_PPP_ERROR_REQUIRE_MPPE_NOT_ALLOWED NM_SETTING_PPPOE_ERROR_MISSING_PPP_SETTING NM_SETTING_SERIAL_ERROR_MISSING_PPP_SETTING NM_SETTING_WIRELESS_ERROR_MISSING_SECURITY_SETTING
2014-10-20 13:52:23 -04:00
NM_CONNECTION_ERROR,
NM_CONNECTION_ERROR_INVALID_PROPERTY,
_("property is invalid"));
g_prefix_error (error, "%s.%s: ", NM_SETTING_IP6_CONFIG_SETTING_NAME, NM_SETTING_IP_CONFIG_METHOD);
return FALSE;
}
return TRUE;
}
static void
nm_setting_ip6_config_init (NMSettingIP6Config *setting)
{
}
static GVariant *
ip6_dns_to_dbus (const GValue *prop_value)
{
return nm_utils_ip6_dns_to_variant (g_value_get_boxed (prop_value));
}
static void
ip6_dns_from_dbus (GVariant *dbus_value,
GValue *prop_value)
{
g_value_take_boxed (prop_value, nm_utils_ip6_dns_from_variant (dbus_value));
}
static GVariant *
ip6_addresses_get (NMSetting *setting,
const char *property)
{
GPtrArray *addrs;
const char *gateway;
GVariant *ret;
g_object_get (setting, property, &addrs, NULL);
gateway = nm_setting_ip_config_get_gateway (NM_SETTING_IP_CONFIG (setting));
ret = nm_utils_ip6_addresses_to_variant (addrs, gateway);
g_ptr_array_unref (addrs);
return ret;
}
static void
ip6_addresses_set (NMSetting *setting,
GVariant *connection_dict,
const char *property,
GVariant *value)
{
GPtrArray *addrs;
char *gateway = NULL;
if (!_nm_setting_use_legacy_property (setting, connection_dict, "addresses", "address-data"))
return;
addrs = nm_utils_ip6_addresses_from_variant (value, &gateway);
g_object_set (setting,
NM_SETTING_IP_CONFIG_ADDRESSES, addrs,
NM_SETTING_IP_CONFIG_GATEWAY, gateway,
NULL);
g_ptr_array_unref (addrs);
g_free (gateway);
}
static GVariant *
ip6_address_data_get (NMSetting *setting,
NMConnection *connection,
const char *property)
{
GPtrArray *addrs;
GVariant *ret;
g_object_get (setting, NM_SETTING_IP_CONFIG_ADDRESSES, &addrs, NULL);
ret = nm_utils_ip_addresses_to_variant (addrs);
g_ptr_array_unref (addrs);
return ret;
}
static void
ip6_address_data_set (NMSetting *setting,
GVariant *connection_dict,
const char *property,
GVariant *value)
{
GPtrArray *addrs;
/* Ignore 'address-data' if we're going to process 'addresses' */
if (_nm_setting_use_legacy_property (setting, connection_dict, "addresses", "address-data"))
return;
addrs = nm_utils_ip_addresses_from_variant (value, AF_INET6);
g_object_set (setting, NM_SETTING_IP_CONFIG_ADDRESSES, addrs, NULL);
g_ptr_array_unref (addrs);
}
static GVariant *
ip6_routes_get (NMSetting *setting,
const char *property)
{
GPtrArray *routes;
GVariant *ret;
g_object_get (setting, property, &routes, NULL);
ret = nm_utils_ip6_routes_to_variant (routes);
g_ptr_array_unref (routes);
return ret;
}
static void
ip6_routes_set (NMSetting *setting,
GVariant *connection_dict,
const char *property,
GVariant *value)
{
GPtrArray *routes;
if (!_nm_setting_use_legacy_property (setting, connection_dict, "routes", "route-data"))
return;
routes = nm_utils_ip6_routes_from_variant (value);
g_object_set (setting, property, routes, NULL);
g_ptr_array_unref (routes);
}
static GVariant *
ip6_route_data_get (NMSetting *setting,
NMConnection *connection,
const char *property)
{
GPtrArray *routes;
GVariant *ret;
g_object_get (setting, NM_SETTING_IP_CONFIG_ROUTES, &routes, NULL);
ret = nm_utils_ip_routes_to_variant (routes);
g_ptr_array_unref (routes);
return ret;
}
static void
ip6_route_data_set (NMSetting *setting,
GVariant *connection_dict,
const char *property,
GVariant *value)
{
GPtrArray *routes;
/* Ignore 'route-data' if we're going to process 'routes' */
if (_nm_setting_use_legacy_property (setting, connection_dict, "routes", "route-data"))
return;
routes = nm_utils_ip_routes_from_variant (value, AF_INET6);
g_object_set (setting, NM_SETTING_IP_CONFIG_ROUTES, routes, NULL);
g_ptr_array_unref (routes);
}
static void
set_property (GObject *object, guint prop_id,
const GValue *value, GParamSpec *pspec)
{
NMSettingIP6ConfigPrivate *priv = NM_SETTING_IP6_CONFIG_GET_PRIVATE (object);
switch (prop_id) {
case PROP_IP6_PRIVACY:
priv->ip6_privacy = g_value_get_enum (value);
break;
default:
G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec);
break;
}
}
static void
get_property (GObject *object, guint prop_id,
GValue *value, GParamSpec *pspec)
{
NMSettingIP6ConfigPrivate *priv = NM_SETTING_IP6_CONFIG_GET_PRIVATE (object);
switch (prop_id) {
case PROP_IP6_PRIVACY:
g_value_set_enum (value, priv->ip6_privacy);
break;
default:
G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec);
break;
}
}
static void
nm_setting_ip6_config_class_init (NMSettingIP6ConfigClass *ip6_class)
{
GObjectClass *object_class = G_OBJECT_CLASS (ip6_class);
NMSettingClass *setting_class = NM_SETTING_CLASS (ip6_class);
g_type_class_add_private (ip6_class, sizeof (NMSettingIP6ConfigPrivate));
/* virtual methods */
object_class->set_property = set_property;
object_class->get_property = get_property;
setting_class->verify = verify;
/* Properties */
/* ---ifcfg-rh---
* property: method
* variable: IPV6INIT, IPV6FORWARDING, IPV6_AUTOCONF, DHCPV6C
* default: IPV6INIT=yes; IPV6FORWARDING=no; IPV6_AUTOCONF=!IPV6FORWARDING, DHCPV6=no
* description: Method used for IPv6 protocol configuration.
* ignore ~ IPV6INIT=no; auto ~ IPV6_AUTOCONF=yes; dhcp ~ IPV6_AUTOCONF=no and DHCPV6C=yes
* ---end---
*/
/* ---keyfile---
* property: dns
* format: list of DNS IP addresses
* description: List of DNS servers.
* example: dns=2001:4860:4860::8888;2001:4860:4860::8844;
* ---end---
* ---ifcfg-rh---
* property: dns
* variable: DNS1, DNS2, ...
* format: string
* description: List of DNS servers. NetworkManager uses the variables both
* for IPv4 and IPv6.
* ---end---
*/
/* ---ifcfg-rh---
* property: dns-search
* variable: DOMAIN
* format: string (space-separated domains)
* description: List of DNS search domains.
* ---end---
*/
/* ---keyfile---
* property: addresses
* variable: address1, address2, ...
* format: address/plen
* description: List of static IP addresses.
* example: address1=abbe::cafe/96 address2=2001::1234
* ---end---
* ---ifcfg-rh---
* property: addresses
* variable: IPV6ADDR, IPV6ADDR_SECONDARIES
* description: List of static IP addresses.
* example: IPV6ADDR=ab12:9876::1
* IPV6ADDR_SECONDARIES="ab12:9876::2 ab12:9876::3"
* ---end---
*/
/* ---keyfile---
* property: gateway
* variable: gateway
* format: string
* description: Gateway IP addresses as a string.
* example: gateway=abbe::1
* ---end---
* ---ifcfg-rh---
* property: gateway
* variable: IPV6_DEFAULTGW
* description: Gateway IP address.
* example: IPV6_DEFAULTGW=abbe::1
* ---end---
*/
/* ---keyfile---
* property: routes
* variable: route1, route2, ...
* format: route/plen[,gateway,metric]
* description: List of IP routes.
* example: route1=2001:4860:4860::/64,2620:52:0:2219:222:68ff:fe11:5403
* ---end---
* ---ifcfg-rh---
* property: routes
* variable: (none)
* description: List of static routes. They are not stored in ifcfg-* file,
* but in route6-* file instead in the form of command line for 'ip route add'.
* ---end---
*/
/* ---ifcfg-rh---
* property: ignore-auto-routes
* variable: IPV6_PEERROUTES(+)
* default: yes
* description: IPV6_PEERROUTES has the opposite meaning as 'ignore-auto-routes' property.
* ---end---
*/
/* ---ifcfg-rh---
* property: ignore-auto-dns
* variable: IPV6_PEERDNS(+)
* default: yes
* description: IPV6_PEERDNS has the opposite meaning as 'ignore-auto-dns' property.
* ---end---
*/
/* ---ifcfg-rh---
* property: dhcp-hostname
* variable: DHCP_HOSTNAME
* description: Hostname to send the DHCP server.
* ---end---
*/
/* ---ifcfg-rh---
* property: never-default
* variable: IPV6_DEFROUTE(+), (and IPV6_DEFAULTGW, IPV6_DEFAULTDEV in /etc/sysconfig/network)
* default: IPV6_DEFROUTE=yes (when no variable specified)
* description: IPV6_DEFROUTE=no tells NetworkManager that this connection
* should not be assigned the default IPv6 route. IPV6_DEFROUTE has the opposite
* meaning as 'never-default' property.
* ---end---
*/
/* ---ifcfg-rh---
* property: may-fail
* variable: IPV6_FAILURE_FATAL(+)
* default: no
* description: IPV6_FAILURE_FATAL has the opposite meaning as 'may-fail' property.
* ---end---
*/
/**
* NMSettingIP6Config:ip6-privacy:
*
* Configure IPv6 Privacy Extensions for SLAAC, described in RFC4941. If
* enabled, it makes the kernel generate a temporary IPv6 address in
* addition to the public one generated from MAC address via modified
* EUI-64. This enhances privacy, but could cause problems in some
* applications, on the other hand. The permitted values are: 0: disabled,
* 1: enabled (prefer public address), 2: enabled (prefer temporary
* addresses).
**/
/* ---ifcfg-rh---
* property: ip6-privacy
* variable: IPV6_PRIVACY, IPV6_PRIVACY_PREFER_PUBLIC_IP(+)
* values: IPV6_PRIVACY: no, yes (rfc3041 or rfc4941);
* IPV6_PRIVACY_PREFER_PUBLIC_IP: yes, no
* default: no
* description: Configure IPv6 Privacy Extensions for SLAAC (RFC4941).
* example: IPV6_PRIVACY=rfc3041 IPV6_PRIVACY_PREFER_PUBLIC_IP=yes
* ---end---
*/
g_object_class_install_property
(object_class, PROP_IP6_PRIVACY,
g_param_spec_enum (NM_SETTING_IP6_CONFIG_IP6_PRIVACY, "", "",
NM_TYPE_SETTING_IP6_CONFIG_PRIVACY,
NM_SETTING_IP6_CONFIG_PRIVACY_UNKNOWN,
G_PARAM_READWRITE |
G_PARAM_CONSTRUCT |
G_PARAM_STATIC_STRINGS));
/* IP6-specific property overrides */
/* ---dbus---
* property: dns
* format: array of byte array
* description: Array of IP addresses of DNS servers (in network byte order)
* ---end---
*/
_nm_setting_class_transform_property (setting_class,
NM_SETTING_IP_CONFIG_DNS,
G_VARIANT_TYPE ("aay"),
ip6_dns_to_dbus,
ip6_dns_from_dbus);
/* ---dbus---
* property: addresses
* format: array of legacy IPv6 address struct (a(ayuay))
* description: Deprecated in favor of the 'address-data' and 'gateway'
* properties, but this can be used for backward-compatibility with older
* daemons. Note that if you send this property the daemon will ignore
* 'address-data' and 'gateway'.
*
* Array of IPv6 address structures. Each IPv6 address structure is
* composed of an IPv6 address, a prefix length (1 - 128), and an IPv6
* gateway address. The gateway may be zeroed out if no gateway exists for
* that subnet.
* ---end---
*/
_nm_setting_class_override_property (setting_class,
NM_SETTING_IP_CONFIG_ADDRESSES,
G_VARIANT_TYPE ("a(ayuay)"),
ip6_addresses_get,
ip6_addresses_set,
NULL);
/* ---dbus---
* property: address-data
* format: array of vardict
* description: Array of IPv6 addresses. Each address dictionary contains at
* least 'address' and 'prefix' entries, containing the IP address as a
* string, and the prefix length as a uint32. Additional attributes may
* also exist on some addresses.
* ---end---
*/
_nm_setting_class_add_dbus_only_property (setting_class,
"address-data",
G_VARIANT_TYPE ("aa{sv}"),
ip6_address_data_get,
ip6_address_data_set);
/* ---dbus---
* property: routes
* format: array of legacy IPv6 route struct (a(ayuayu))
* description: Deprecated in favor of the 'route-data' property, but this
* can be used for backward-compatibility with older daemons. Note that if
* you send this property the daemon will ignore 'route-data'.
*
* Array of IPv6 route structures. Each IPv6 route structure is
* composed of an IPv6 address, a prefix length (1 - 128), an IPv6
* next hop address (which may be zeroed out if there is no next hop),
* and a metric. If the metric is 0, NM will choose an appropriate
* default metric for the device.
* ---end---
*/
_nm_setting_class_override_property (setting_class,
NM_SETTING_IP_CONFIG_ROUTES,
G_VARIANT_TYPE ("a(ayuayu)"),
ip6_routes_get,
ip6_routes_set,
NULL);
/* ---dbus---
* property: route-data
* format: array of vardict
* description: Array of IPv6 routes. Each route dictionary contains at
* least 'dest' and 'prefix' entries, containing the destination IP
* address as a string, and the prefix length as a uint32. Most routes
* will also have a 'next-hop' entry, containing the next hop IP address as
* a string. If the route has a 'metric' entry (containing a uint32), that
* will be used as the metric for the route (otherwise NM will pick a
* default value appropriate to the device). Additional attributes may
* also exist on some routes.
* ---end---
*/
_nm_setting_class_add_dbus_only_property (setting_class,
"route-data",
G_VARIANT_TYPE ("aa{sv}"),
ip6_route_data_get,
ip6_route_data_set);
}