NetworkManager/libnm-core/nm-setting-ip6-config.c

300 lines
10 KiB
C
Raw Normal View History

/* -*- Mode: C; tab-width: 4; indent-tabs-mode: t; c-basic-offset: 4 -*- */
/*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the
* Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
* Boston, MA 02110-1301 USA.
*
* Copyright 2007 - 2014 Red Hat, Inc.
*/
#include <string.h>
#include <glib/gi18n.h>
#include "nm-setting-ip6-config.h"
#include "nm-setting-private.h"
#include "nm-core-enum-types.h"
/**
* SECTION:nm-setting-ip6-config
* @short_description: Describes IPv6 addressing, routing, and name service properties
*
* The #NMSettingIP6Config object is a #NMSetting subclass that describes
* properties related to IPv6 addressing, routing, and Domain Name Service
*
* #NMSettingIP6Config has few properties or methods of its own; it inherits
* almost everything from #NMSettingIPConfig.
*
* NetworkManager supports 6 values for the #NMSettingIPConfig:method property
* for IPv6. If "auto" is specified then the appropriate automatic method (PPP,
* router advertisement, etc) is used for the device and most other properties
* can be left unset. To force the use of DHCP only, specify "dhcp"; this
* method is only valid for Ethernet- based hardware. If "link-local" is
* specified, then an IPv6 link-local address will be assigned to the interface.
* If "manual" is specified, static IP addressing is used and at least one IP
* address must be given in the "addresses" property. If "ignore" is specified,
* IPv6 configuration is not done. Note: the "shared" method is not yet
* supported.
**/
G_DEFINE_TYPE_WITH_CODE (NMSettingIP6Config, nm_setting_ip6_config, NM_TYPE_SETTING_IP_CONFIG,
_nm_register_setting (IP6_CONFIG, 4))
NM_SETTING_REGISTER_TYPE (NM_TYPE_SETTING_IP6_CONFIG)
#define NM_SETTING_IP6_CONFIG_GET_PRIVATE(o) (G_TYPE_INSTANCE_GET_PRIVATE ((o), NM_TYPE_SETTING_IP6_CONFIG, NMSettingIP6ConfigPrivate))
typedef struct {
NMSettingIP6ConfigPrivacy ip6_privacy;
} NMSettingIP6ConfigPrivate;
enum {
PROP_0,
PROP_IP6_PRIVACY,
LAST_PROP
};
/**
* nm_setting_ip6_config_new:
*
* Creates a new #NMSettingIP6Config object with default values.
*
* Returns: (transfer full): the new empty #NMSettingIP6Config object
**/
NMSetting *
nm_setting_ip6_config_new (void)
{
return (NMSetting *) g_object_new (NM_TYPE_SETTING_IP6_CONFIG, NULL);
}
/**
* nm_setting_ip6_config_get_ip6_privacy:
* @setting: the #NMSettingIP6Config
*
* Returns the value contained in the #NMSettingIP6Config:ip6-privacy
* property.
*
* Returns: IPv6 Privacy Extensions configuration value (#NMSettingIP6ConfigPrivacy).
**/
NMSettingIP6ConfigPrivacy
nm_setting_ip6_config_get_ip6_privacy (NMSettingIP6Config *setting)
{
g_return_val_if_fail (NM_IS_SETTING_IP6_CONFIG (setting), NM_SETTING_IP6_CONFIG_PRIVACY_UNKNOWN);
return NM_SETTING_IP6_CONFIG_GET_PRIVATE (setting)->ip6_privacy;
}
static gboolean
verify (NMSetting *setting, NMConnection *connection, GError **error)
{
NMSettingIPConfig *s_ip = NM_SETTING_IP_CONFIG (setting);
const char *method;
if (!NM_SETTING_CLASS (nm_setting_ip6_config_parent_class)->verify (setting, connection, error))
return FALSE;
method = nm_setting_ip_config_get_method (s_ip);
/* Base class already checked that it exists */
g_assert (method);
if (!strcmp (method, NM_SETTING_IP6_CONFIG_METHOD_MANUAL)) {
if (nm_setting_ip_config_get_num_addresses (s_ip) == 0) {
g_set_error (error,
libnm-core: merge NMSetting*Error into NMConnectionError Each setting type was defining its own error type, but most of them had exactly the same three errors ("unknown", "missing property", and "invalid property"), and none of the other values was of much use programmatically anyway. So, this commit merges NMSettingError, NMSettingAdslError, etc, all into NMConnectionError. (The reason for merging into NMConnectionError rather than NMSettingError is that we also already have "NMSettingsError", for errors related to the settings service, so "NMConnectionError" is a less-confusable name for settings/connection errors than "NMSettingError".) Also, make sure that all of the affected error messages are localized, and (where appropriate) prefix them with the relevant property name. Renamed error codes: NM_SETTING_ERROR_PROPERTY_NOT_FOUND -> NM_CONNECTION_ERROR_PROPERTY_NOT_FOUND NM_SETTING_ERROR_PROPERTY_NOT_SECRET -> NM_CONNECTION_ERROR_PROPERTY_NOT_SECRET Remapped error codes: NM_SETTING_*_ERROR_MISSING_PROPERTY -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_*_ERROR_INVALID_PROPERTY -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_ERROR_PROPERTY_TYPE_MISMATCH -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_BLUETOOTH_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_INVALID_SETTING NM_SETTING_BOND_ERROR_INVALID_OPTION -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_BOND_ERROR_MISSING_OPTION -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_CONNECTION_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_CONNECTION_ERROR_SLAVE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_IP4_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_IP6_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_VLAN_ERROR_INVALID_PARENT -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_MISSING_802_1X_SETTING -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_802_1X -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_USERNAME -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_SHARED_KEY_REQUIRES_WEP -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_ERROR_CHANNEL_REQUIRES_BAND -> NM_CONNECTION_ERROR_MISSING_PROPERTY Dropped error codes (were previously defined but unused): NM_SETTING_CDMA_ERROR_MISSING_SERIAL_SETTING NM_SETTING_CONNECTION_ERROR_IP_CONFIG_NOT_ALLOWED NM_SETTING_GSM_ERROR_MISSING_SERIAL_SETTING NM_SETTING_PPP_ERROR_REQUIRE_MPPE_NOT_ALLOWED NM_SETTING_PPPOE_ERROR_MISSING_PPP_SETTING NM_SETTING_SERIAL_ERROR_MISSING_PPP_SETTING NM_SETTING_WIRELESS_ERROR_MISSING_SECURITY_SETTING
2014-10-20 13:52:23 -04:00
NM_CONNECTION_ERROR,
NM_CONNECTION_ERROR_MISSING_PROPERTY,
_("this property cannot be empty for '%s=%s'"),
NM_SETTING_IP_CONFIG_METHOD, method);
g_prefix_error (error, "%s.%s: ", NM_SETTING_IP6_CONFIG_SETTING_NAME, NM_SETTING_IP_CONFIG_ADDRESSES);
return FALSE;
}
} else if ( !strcmp (method, NM_SETTING_IP6_CONFIG_METHOD_IGNORE)
|| !strcmp (method, NM_SETTING_IP6_CONFIG_METHOD_LINK_LOCAL)
|| !strcmp (method, NM_SETTING_IP6_CONFIG_METHOD_SHARED)) {
if (nm_setting_ip_config_get_num_dns (s_ip) > 0) {
g_set_error (error,
libnm-core: merge NMSetting*Error into NMConnectionError Each setting type was defining its own error type, but most of them had exactly the same three errors ("unknown", "missing property", and "invalid property"), and none of the other values was of much use programmatically anyway. So, this commit merges NMSettingError, NMSettingAdslError, etc, all into NMConnectionError. (The reason for merging into NMConnectionError rather than NMSettingError is that we also already have "NMSettingsError", for errors related to the settings service, so "NMConnectionError" is a less-confusable name for settings/connection errors than "NMSettingError".) Also, make sure that all of the affected error messages are localized, and (where appropriate) prefix them with the relevant property name. Renamed error codes: NM_SETTING_ERROR_PROPERTY_NOT_FOUND -> NM_CONNECTION_ERROR_PROPERTY_NOT_FOUND NM_SETTING_ERROR_PROPERTY_NOT_SECRET -> NM_CONNECTION_ERROR_PROPERTY_NOT_SECRET Remapped error codes: NM_SETTING_*_ERROR_MISSING_PROPERTY -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_*_ERROR_INVALID_PROPERTY -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_ERROR_PROPERTY_TYPE_MISMATCH -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_BLUETOOTH_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_INVALID_SETTING NM_SETTING_BOND_ERROR_INVALID_OPTION -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_BOND_ERROR_MISSING_OPTION -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_CONNECTION_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_CONNECTION_ERROR_SLAVE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_IP4_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_IP6_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_VLAN_ERROR_INVALID_PARENT -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_MISSING_802_1X_SETTING -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_802_1X -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_USERNAME -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_SHARED_KEY_REQUIRES_WEP -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_ERROR_CHANNEL_REQUIRES_BAND -> NM_CONNECTION_ERROR_MISSING_PROPERTY Dropped error codes (were previously defined but unused): NM_SETTING_CDMA_ERROR_MISSING_SERIAL_SETTING NM_SETTING_CONNECTION_ERROR_IP_CONFIG_NOT_ALLOWED NM_SETTING_GSM_ERROR_MISSING_SERIAL_SETTING NM_SETTING_PPP_ERROR_REQUIRE_MPPE_NOT_ALLOWED NM_SETTING_PPPOE_ERROR_MISSING_PPP_SETTING NM_SETTING_SERIAL_ERROR_MISSING_PPP_SETTING NM_SETTING_WIRELESS_ERROR_MISSING_SECURITY_SETTING
2014-10-20 13:52:23 -04:00
NM_CONNECTION_ERROR,
NM_CONNECTION_ERROR_INVALID_PROPERTY,
_("'%s' not allowed for %s=%s"),
_("this property is not allowed for '%s=%s'"),
NM_SETTING_IP_CONFIG_METHOD, method);
g_prefix_error (error, "%s.%s: ", NM_SETTING_IP6_CONFIG_SETTING_NAME, NM_SETTING_IP_CONFIG_DNS);
return FALSE;
}
if (nm_setting_ip_config_get_num_dns_searches (s_ip) > 0) {
g_set_error (error,
libnm-core: merge NMSetting*Error into NMConnectionError Each setting type was defining its own error type, but most of them had exactly the same three errors ("unknown", "missing property", and "invalid property"), and none of the other values was of much use programmatically anyway. So, this commit merges NMSettingError, NMSettingAdslError, etc, all into NMConnectionError. (The reason for merging into NMConnectionError rather than NMSettingError is that we also already have "NMSettingsError", for errors related to the settings service, so "NMConnectionError" is a less-confusable name for settings/connection errors than "NMSettingError".) Also, make sure that all of the affected error messages are localized, and (where appropriate) prefix them with the relevant property name. Renamed error codes: NM_SETTING_ERROR_PROPERTY_NOT_FOUND -> NM_CONNECTION_ERROR_PROPERTY_NOT_FOUND NM_SETTING_ERROR_PROPERTY_NOT_SECRET -> NM_CONNECTION_ERROR_PROPERTY_NOT_SECRET Remapped error codes: NM_SETTING_*_ERROR_MISSING_PROPERTY -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_*_ERROR_INVALID_PROPERTY -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_ERROR_PROPERTY_TYPE_MISMATCH -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_BLUETOOTH_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_INVALID_SETTING NM_SETTING_BOND_ERROR_INVALID_OPTION -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_BOND_ERROR_MISSING_OPTION -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_CONNECTION_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_CONNECTION_ERROR_SLAVE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_IP4_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_IP6_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_VLAN_ERROR_INVALID_PARENT -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_MISSING_802_1X_SETTING -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_802_1X -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_USERNAME -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_SHARED_KEY_REQUIRES_WEP -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_ERROR_CHANNEL_REQUIRES_BAND -> NM_CONNECTION_ERROR_MISSING_PROPERTY Dropped error codes (were previously defined but unused): NM_SETTING_CDMA_ERROR_MISSING_SERIAL_SETTING NM_SETTING_CONNECTION_ERROR_IP_CONFIG_NOT_ALLOWED NM_SETTING_GSM_ERROR_MISSING_SERIAL_SETTING NM_SETTING_PPP_ERROR_REQUIRE_MPPE_NOT_ALLOWED NM_SETTING_PPPOE_ERROR_MISSING_PPP_SETTING NM_SETTING_SERIAL_ERROR_MISSING_PPP_SETTING NM_SETTING_WIRELESS_ERROR_MISSING_SECURITY_SETTING
2014-10-20 13:52:23 -04:00
NM_CONNECTION_ERROR,
NM_CONNECTION_ERROR_INVALID_PROPERTY,
_("this property is not allowed for '%s=%s'"),
NM_SETTING_IP_CONFIG_METHOD, method);
g_prefix_error (error, "%s.%s: ", NM_SETTING_IP6_CONFIG_SETTING_NAME, NM_SETTING_IP_CONFIG_DNS_SEARCH);
return FALSE;
}
if (nm_setting_ip_config_get_num_addresses (s_ip) > 0) {
g_set_error (error,
libnm-core: merge NMSetting*Error into NMConnectionError Each setting type was defining its own error type, but most of them had exactly the same three errors ("unknown", "missing property", and "invalid property"), and none of the other values was of much use programmatically anyway. So, this commit merges NMSettingError, NMSettingAdslError, etc, all into NMConnectionError. (The reason for merging into NMConnectionError rather than NMSettingError is that we also already have "NMSettingsError", for errors related to the settings service, so "NMConnectionError" is a less-confusable name for settings/connection errors than "NMSettingError".) Also, make sure that all of the affected error messages are localized, and (where appropriate) prefix them with the relevant property name. Renamed error codes: NM_SETTING_ERROR_PROPERTY_NOT_FOUND -> NM_CONNECTION_ERROR_PROPERTY_NOT_FOUND NM_SETTING_ERROR_PROPERTY_NOT_SECRET -> NM_CONNECTION_ERROR_PROPERTY_NOT_SECRET Remapped error codes: NM_SETTING_*_ERROR_MISSING_PROPERTY -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_*_ERROR_INVALID_PROPERTY -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_ERROR_PROPERTY_TYPE_MISMATCH -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_BLUETOOTH_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_INVALID_SETTING NM_SETTING_BOND_ERROR_INVALID_OPTION -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_BOND_ERROR_MISSING_OPTION -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_CONNECTION_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_CONNECTION_ERROR_SLAVE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_IP4_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_IP6_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_VLAN_ERROR_INVALID_PARENT -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_MISSING_802_1X_SETTING -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_802_1X -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_USERNAME -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_SHARED_KEY_REQUIRES_WEP -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_ERROR_CHANNEL_REQUIRES_BAND -> NM_CONNECTION_ERROR_MISSING_PROPERTY Dropped error codes (were previously defined but unused): NM_SETTING_CDMA_ERROR_MISSING_SERIAL_SETTING NM_SETTING_CONNECTION_ERROR_IP_CONFIG_NOT_ALLOWED NM_SETTING_GSM_ERROR_MISSING_SERIAL_SETTING NM_SETTING_PPP_ERROR_REQUIRE_MPPE_NOT_ALLOWED NM_SETTING_PPPOE_ERROR_MISSING_PPP_SETTING NM_SETTING_SERIAL_ERROR_MISSING_PPP_SETTING NM_SETTING_WIRELESS_ERROR_MISSING_SECURITY_SETTING
2014-10-20 13:52:23 -04:00
NM_CONNECTION_ERROR,
NM_CONNECTION_ERROR_INVALID_PROPERTY,
_("this property is not allowed for '%s=%s'"),
NM_SETTING_IP_CONFIG_METHOD, method);
g_prefix_error (error, "%s.%s: ", NM_SETTING_IP6_CONFIG_SETTING_NAME, NM_SETTING_IP_CONFIG_ADDRESSES);
return FALSE;
}
} else if ( !strcmp (method, NM_SETTING_IP6_CONFIG_METHOD_AUTO)
|| !strcmp (method, NM_SETTING_IP6_CONFIG_METHOD_DHCP)) {
/* nothing to do */
} else {
g_set_error_literal (error,
libnm-core: merge NMSetting*Error into NMConnectionError Each setting type was defining its own error type, but most of them had exactly the same three errors ("unknown", "missing property", and "invalid property"), and none of the other values was of much use programmatically anyway. So, this commit merges NMSettingError, NMSettingAdslError, etc, all into NMConnectionError. (The reason for merging into NMConnectionError rather than NMSettingError is that we also already have "NMSettingsError", for errors related to the settings service, so "NMConnectionError" is a less-confusable name for settings/connection errors than "NMSettingError".) Also, make sure that all of the affected error messages are localized, and (where appropriate) prefix them with the relevant property name. Renamed error codes: NM_SETTING_ERROR_PROPERTY_NOT_FOUND -> NM_CONNECTION_ERROR_PROPERTY_NOT_FOUND NM_SETTING_ERROR_PROPERTY_NOT_SECRET -> NM_CONNECTION_ERROR_PROPERTY_NOT_SECRET Remapped error codes: NM_SETTING_*_ERROR_MISSING_PROPERTY -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_*_ERROR_INVALID_PROPERTY -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_ERROR_PROPERTY_TYPE_MISMATCH -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_BLUETOOTH_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_INVALID_SETTING NM_SETTING_BOND_ERROR_INVALID_OPTION -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_BOND_ERROR_MISSING_OPTION -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_CONNECTION_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_CONNECTION_ERROR_SLAVE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_IP4_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_IP6_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_VLAN_ERROR_INVALID_PARENT -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_MISSING_802_1X_SETTING -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_802_1X -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_USERNAME -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_SHARED_KEY_REQUIRES_WEP -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_ERROR_CHANNEL_REQUIRES_BAND -> NM_CONNECTION_ERROR_MISSING_PROPERTY Dropped error codes (were previously defined but unused): NM_SETTING_CDMA_ERROR_MISSING_SERIAL_SETTING NM_SETTING_CONNECTION_ERROR_IP_CONFIG_NOT_ALLOWED NM_SETTING_GSM_ERROR_MISSING_SERIAL_SETTING NM_SETTING_PPP_ERROR_REQUIRE_MPPE_NOT_ALLOWED NM_SETTING_PPPOE_ERROR_MISSING_PPP_SETTING NM_SETTING_SERIAL_ERROR_MISSING_PPP_SETTING NM_SETTING_WIRELESS_ERROR_MISSING_SECURITY_SETTING
2014-10-20 13:52:23 -04:00
NM_CONNECTION_ERROR,
NM_CONNECTION_ERROR_INVALID_PROPERTY,
_("property is invalid"));
g_prefix_error (error, "%s.%s: ", NM_SETTING_IP6_CONFIG_SETTING_NAME, NM_SETTING_IP_CONFIG_METHOD);
return FALSE;
}
return TRUE;
}
static void
nm_setting_ip6_config_init (NMSettingIP6Config *setting)
{
}
static GVariant *
ip6_dns_to_dbus (const GValue *prop_value)
{
return nm_utils_ip6_dns_to_variant (g_value_get_boxed (prop_value));
}
static void
ip6_dns_from_dbus (GVariant *dbus_value,
GValue *prop_value)
{
g_value_take_boxed (prop_value, nm_utils_ip6_dns_from_variant (dbus_value));
}
static GVariant *
ip6_addresses_to_dbus (const GValue *prop_value)
{
return nm_utils_ip6_addresses_to_variant (g_value_get_boxed (prop_value));
}
static void
ip6_addresses_from_dbus (GVariant *dbus_value,
GValue *prop_value)
{
g_value_take_boxed (prop_value, nm_utils_ip6_addresses_from_variant (dbus_value));
}
static GVariant *
ip6_routes_to_dbus (const GValue *prop_value)
{
return nm_utils_ip6_routes_to_variant (g_value_get_boxed (prop_value));
}
static void
ip6_routes_from_dbus (GVariant *dbus_value,
GValue *prop_value)
{
g_value_take_boxed (prop_value, nm_utils_ip6_routes_from_variant (dbus_value));
}
static void
set_property (GObject *object, guint prop_id,
const GValue *value, GParamSpec *pspec)
{
NMSettingIP6ConfigPrivate *priv = NM_SETTING_IP6_CONFIG_GET_PRIVATE (object);
switch (prop_id) {
case PROP_IP6_PRIVACY:
priv->ip6_privacy = g_value_get_enum (value);
break;
default:
G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec);
break;
}
}
static void
get_property (GObject *object, guint prop_id,
GValue *value, GParamSpec *pspec)
{
NMSettingIP6ConfigPrivate *priv = NM_SETTING_IP6_CONFIG_GET_PRIVATE (object);
switch (prop_id) {
case PROP_IP6_PRIVACY:
g_value_set_enum (value, priv->ip6_privacy);
break;
default:
G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec);
break;
}
}
static void
nm_setting_ip6_config_class_init (NMSettingIP6ConfigClass *ip6_class)
{
GObjectClass *object_class = G_OBJECT_CLASS (ip6_class);
NMSettingClass *setting_class = NM_SETTING_CLASS (ip6_class);
g_type_class_add_private (ip6_class, sizeof (NMSettingIP6ConfigPrivate));
/* virtual methods */
object_class->set_property = set_property;
object_class->get_property = get_property;
setting_class->verify = verify;
/* Properties */
/**
* NMSettingIP6Config:ip6-privacy:
*
* Configure IPv6 Privacy Extensions for SLAAC, described in RFC4941. If
* enabled, it makes the kernel generate a temporary IPv6 address in
* addition to the public one generated from MAC address via modified
* EUI-64. This enhances privacy, but could cause problems in some
* applications, on the other hand. The permitted values are: 0: disabled,
* 1: enabled (prefer public address), 2: enabled (prefer temporary
* addresses).
**/
g_object_class_install_property
(object_class, PROP_IP6_PRIVACY,
g_param_spec_enum (NM_SETTING_IP6_CONFIG_IP6_PRIVACY, "", "",
NM_TYPE_SETTING_IP6_CONFIG_PRIVACY,
NM_SETTING_IP6_CONFIG_PRIVACY_UNKNOWN,
G_PARAM_READWRITE |
G_PARAM_CONSTRUCT |
G_PARAM_STATIC_STRINGS));
/* IP6-specific property overrides */
_nm_setting_class_transform_property (setting_class,
NM_SETTING_IP_CONFIG_DNS,
G_VARIANT_TYPE ("aay"),
ip6_dns_to_dbus,
ip6_dns_from_dbus);
_nm_setting_class_transform_property (setting_class,
NM_SETTING_IP_CONFIG_ADDRESSES,
G_VARIANT_TYPE ("a(ayuay)"),
ip6_addresses_to_dbus,
ip6_addresses_from_dbus);
_nm_setting_class_transform_property (setting_class,
NM_SETTING_IP_CONFIG_ROUTES,
G_VARIANT_TYPE ("a(ayuayu)"),
ip6_routes_to_dbus,
ip6_routes_from_dbus);
}