From 620d2c8ff2aa6db69e1340f2d811b557ff745607 Mon Sep 17 00:00:00 2001
From: Marcello Haddeman <marcellohaddeman@gmail.com>
Date: Mon, 4 May 2026 19:41:39 +0200
Subject: [PATCH] Configuring/Basics/Variables: add input:tablettool section

Add input:tablettool section for new tablettool configuration variables.
---
 content/Configuring/Basics/Variables.md | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/content/Configuring/Basics/Variables.md b/content/Configuring/Basics/Variables.md
index 5ae6cd2d..c07bdb6a 100644
--- a/content/Configuring/Basics/Variables.md
+++ b/content/Configuring/Basics/Variables.md
@@ -286,6 +286,17 @@ _Subcategory `input.tablet.`_
 | active_area_size | size of tablet's active area in mm | vec2 | [0, 0] |
 | active_area_position | position of the active area in mm | vec2 | [0, 0] |
 
+#### Tablettool
+
+_Subcategory `input.tablettool.`_
+
+| name | description | type | default |
+| --- | --- | --- | --- |
+| eraser_button_mode | Change the eraser button behavior on the tool. When set to `0`, use the default hardware behavior of the tool. When set to `1`, the eraser button on the tool sends a button event instead. | int | 0 |
+| eraser_button_override | Set a button to be button event when eraser_button_mode is set to `1`. Has to be an int, cannot be a string. Must be a valid button (e.g. BTN_STYLUS) excluding fake buttons (e.g. BTN_TOOL_*) and keys (KEY_*). Check wev if you have any doubts regarding the ID. `0` means default. | int | 0 |
+| pressure_range_min | Set the minimum pressure range for the tool, a negative number will set the default minimum pressure value. This is usually `0.0` | float | -1.0 |
+| pressure_range_max | Set the maximum pressure range for the tool, a negative number will set the default maximum pressure value. This is usually `1.0` | float | -1.0 |
+
 ### Per-device input config
 
 Described [here](../../Advanced-and-Cool/Devices).