diff --git a/content/Configuring/Autostart.md b/content/Configuring/Autostart.md
new file mode 100644
index 00000000..f203f17e
--- /dev/null
+++ b/content/Configuring/Autostart.md
@@ -0,0 +1,20 @@
+---
+weight: 11
+title: Autostart
+---
+
+Autostarting apps can be done by executing things on the `hyprland.start` event:
+
+```lua
+hl.on("hyprland.start", function () 
+  hl.exec_cmd(terminal)
+  hl.exec_cmd("nm-applet")
+  hl.exec_cmd("waybar & hyprpaper & firefox")
+end)
+```
+
+`hl.exec_cmd()` will spawn an asynchronous process, so there is no need for `& disown` at the end.
+
+In the same vein, you can spawn processes on exit by listening to `hyprland.shutdown`.
+
+See more about `hl.on` over at [Expanding Functionality](../Expanding-functionality)
\ No newline at end of file
diff --git a/content/Configuring/Devices.md b/content/Configuring/Devices.md
new file mode 100644
index 00000000..52780c52
--- /dev/null
+++ b/content/Configuring/Devices.md
@@ -0,0 +1,45 @@
+---
+weight: 11
+title: Devices
+---
+
+For global device configs, check the [Variables](../Variables) page. This page
+will focus on per-device configs.
+
+A basic per-device config is done via the `hl.device()` fn:
+
+```lua
+hl.device({
+    name = "my-epic-keyboard",
+    sensitivity = -0.5
+})
+```
+
+The `name` can be easily obtained by checking the output of `hyprctl devices`.
+
+Inside of it, put your config options. All options from the `input` category
+(and all subcategories, e.g. `input.touchpad`) can be put inside, **EXCEPT**:
+
+- `force_no_accel`
+- `follow_mouse`
+- `float_switch_override_focus`
+
+You can also use the `output` setting for tablets to bind them to outputs.
+Remember to use the name of the `Tablet` and not `Tablet Pad` or `Tablet Tool`.
+
+Additional properties only present in per-device configs:
+
+- `enabled` -> (only for mice / touchpads / touchdevices / keyboards)
+  - enables / disables the device (connects / disconnects from the on-screen cursor)
+  - default: Enabled
+- `keybinds` -> (only for devices that send key events)
+  - enables / disables keybinds for the device
+  - default: Enabled
+
+> [!NOTE]
+> Per-device layouts will by default not alter the keybind keymap, so for example
+> with a global keymap of `us` and a per-device one of `fr`, the keybinds will
+> still act as if you were on `us`.
+> 
+> You can change this behavior by setting `resolve_binds_by_sym = 1`. In that case
+> you'll need to type the symbol specified in the bind to activate it.
\ No newline at end of file
diff --git a/content/Configuring/Dwindle-Layout.md b/content/Configuring/Dwindle-Layout.md
index c05b3d48..e414cc2b 100644
--- a/content/Configuring/Dwindle-Layout.md
+++ b/content/Configuring/Dwindle-Layout.md
@@ -1,5 +1,5 @@
 ---
-weight: 12
+weight: 20
 title: Dwindle Layout
 ---
 
diff --git a/content/Configuring/Expanding-functionality.md b/content/Configuring/Expanding-functionality.md
index 026d0163..485f26b9 100644
--- a/content/Configuring/Expanding-functionality.md
+++ b/content/Configuring/Expanding-functionality.md
@@ -90,6 +90,24 @@ Hyprland exposes a bunch of convenience functions:
  - `hl.get_workspace_windows(workspace_selector)`
  - `hl.get_current_submap()`
  - `hl.version()`
+ - `hl.exec_cmd()`
+
+### Timers
+
+You can spawn and manage timers via `hl.timer()`:
+
+```lua
+local demoTimer = hl.timer(function()
+  print("hello from timer")
+end, { timeout = 1000, type = "repeat" })
+
+demoTimer:set_enabled(false)
+
+hl.bind("SUPER + X", function()
+  -- toggle the timer
+  demoTimer:set_enabled(not demoTimer:is_enabled())
+end)
+```
 
 ### Combining it all
 
diff --git a/content/Configuring/Keywords.md b/content/Configuring/Keywords.md
deleted file mode 100644
index 075e1535..00000000
--- a/content/Configuring/Keywords.md
+++ /dev/null
@@ -1,177 +0,0 @@
----
-weight: 3
-title: Keywords
----
-
-Keywords are not variables, but "commands" for more advanced configuring. On
-this page, you will be presented with some that do not deserve their own page.
-
-See the sidebar for more keywords to control binds, animations, monitors, et
-cetera.
-
-> [!WARNING]
-> Please remember, that for ALL arguments separated by a comma, if you want to
-> leave one of them empty, you cannot reduce the number of commas, _unless told
-> otherwise in a specific section_:
-> 
-> ```ini
-> three_param_keyword = A, B, C # OK
-> three_param_keyword = A, C    # NOT OK
-> three_param_keyword = A, , C  # OK
-> three_param_keyword = A, B,   # OK
-> ```
-
-## Executing
-
-You can execute a shell script on:
-
-- startup of the compositor
-- every time the config is reloaded.
-- shutdown of the compositor
-
-`exec-once = command` will execute only on launch ([support rules](../Dispatchers/#executing-with-rules))
-
-`execr-once = command` will execute only on launch
-
-`exec = command` will execute on each reload ([support rules](../Dispatchers/#executing-with-rules))
-
-`execr = command` will execute on each reload
-
-`exec-shutdown = command` will execute only on shutdown
-
-## Sourcing (multi-file)
-
-Use the `source` keyword to source another file. Globbing is supported
-
-For example, in your `hyprland.conf` you can:
-
-```ini
-source = ~/.config/hypr/myColors.conf
-source = ~/.config/hypr/custom/*
-```
-
-And Hyprland will enter that file and parse it like a Hyprland config.
-
-Please note it's LINEAR. Meaning lines above the `source =` will be parsed first,
-then lines inside `~/.config/hypr/myColors.conf`, then lines below.
-
-## Gestures
-
-Use [libinput-gestures](https://github.com/bulletmark/libinput-gestures) with
-`hyprctl` if you want to expand Hyprland's gestures beyond what's offered in
-[Variables](../Variables).
-
-## Per-device input configs
-
-Per-device config options will overwrite your options set in the `input`
-section. It's worth noting that ONLY values explicitly changed will be
-overwritten.
-
-In order to apply per-device config options, add a new category like this:
-
-```ini
-device {
-    name = ...
-    # options ...
-}
-```
-
-The `name` can be easily obtained by checking the output of `hyprctl devices`.
-
-Inside of it, put your config options. All options from the `input` category
-(and all subcategories, e.g. `input:touchpad`) can be put inside, **EXCEPT**:
-
-- `force_no_accel`
-- `follow_mouse`
-- `float_switch_override_focus`
-
-Properties that change names:
-
-```plain
-touchdevice:transform -> transform
-touchdevice:output -> output
-```
-
-You can also use the `output` setting for tablets to bind them to outputs.
-Remember to use the name of the `Tablet` and not `Tablet Pad` or `Tablet tool`.
-
-Additional properties only present in per-device configs:
-
-- `enabled` -> (only for mice / touchpads / touchdevices / keyboards)
-  - enables / disables the device (connects / disconnects from the on-screen cursor)
-  - default: Enabled
-- `keybinds` -> (only for devices that send key events)
-  - enables / disables keybinds for the device
-  - default: Enabled
-
-Example config section:
-
-```ini
-device {
-    name = royuan-akko-multi-modes-keyboard-b
-    repeat_rate = 50
-    repeat_delay = 500
-    middle_button_emulation = 0
-}
-```
-
-Example modifying per-device config values using `hyprctl`:
-
-```bash
-hyprctl -r -- keyword device[my-device]:sensitivity -1
-```
-
-> [!NOTE]
-> Per-device layouts will by default not alter the keybind keymap, so for example
-> with a global keymap of `us` and a per-device one of `fr`, the keybinds will
-> still act as if you were on `us`.
-> 
-> You can change this behavior by setting `resolve_binds_by_sym = 1`. In that case
-> you'll need to type the symbol specified in the bind to activate it.
-
-## Wallpapers
-
-The "Hyprland" background you see when you first start Hyprland is **NOT A
-WALLPAPER**, it's the default image rendered at the bottom of the render stack.
-
-To set a wallpaper, use a wallpaper utility like
-[hyprpaper](https://github.com/hyprwm/hyprpaper) or
-[swaybg](https://github.com/swaywm/swaybg).
-
-More can be found in [Useful Utilities](../../Useful-Utilities).
-
-## Setting the environment
-
-> [!NOTE]
-> A new environment cannot be passed to already running processes. If you change / add / remove an `env = ` entry
-> when Hyprland is running, only newly spawned apps will pick up the changes.
-
-You can use the `env` keyword to set environment variables,
-e.g:
-
-```ini
-env = XCURSOR_SIZE,24
-```
-
-You can also add a `d` flag if you want the env var to be exported to D-Bus
-(systemd only):
-
-```ini
-envd = XCURSOR_SIZE,24
-```
-
-> [!WARNING]
-> Hyprland puts the raw string to the env var. You should _not_ add quotes around
-> the values.
-> 
-> e.g.:
-> 
-> ```ini
-> env = QT_QPA_PLATFORM,wayland
-> ```
-> 
-> and _**NOT**_
-> 
-> ```ini
-> env = QT_QPA_PLATFORM,"wayland"
-> ```
diff --git a/content/Configuring/Master-Layout.md b/content/Configuring/Master-Layout.md
index ece33b95..1cdb969b 100644
--- a/content/Configuring/Master-Layout.md
+++ b/content/Configuring/Master-Layout.md
@@ -1,5 +1,5 @@
 ---
-weight: 13
+weight: 21
 title: Master Layout
 ---
 
diff --git a/content/Configuring/Monocle-Layout.md b/content/Configuring/Monocle-Layout.md
index 917320be..4d34af2f 100644
--- a/content/Configuring/Monocle-Layout.md
+++ b/content/Configuring/Monocle-Layout.md
@@ -1,5 +1,5 @@
 ---
-weight: 14
+weight: 23
 title: Monocle Layout
 ---
 
diff --git a/content/Configuring/Scrolling-Layout.md b/content/Configuring/Scrolling-Layout.md
index 6cd77e3a..8f7b18da 100644
--- a/content/Configuring/Scrolling-Layout.md
+++ b/content/Configuring/Scrolling-Layout.md
@@ -1,5 +1,5 @@
 ---
-weight: 13
+weight: 22
 title: Scrolling Layout
 ---
 
diff --git a/content/Configuring/Tearing.md b/content/Configuring/Tearing.md
index ef584a72..46b74a4e 100644
--- a/content/Configuring/Tearing.md
+++ b/content/Configuring/Tearing.md
@@ -1,5 +1,5 @@
 ---
-weight: 11
+weight: 15
 title: Tearing
 ---