The request struct's length fields aren't used anymore - we have the
client->req_len field instead, which also is bigreq-compatible.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1639>
(cherry picked from commit 643f91266e)
The request struct's length fields aren't used anymore - we have the
client->req_len field instead, which also is bigreq-compatible.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1639>
(cherry picked from commit 4cb141307c)
The request struct's length fields aren't used anymore - we have the
client->req_len field instead, which also is bigreq-compatible.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1639>
(cherry picked from commit 65224a2f9a)
The request struct's length fields aren't used anymore - we have the
client->req_len field instead, which also is bigreq-compatible.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1639>
(cherry picked from commit 7e5c342be1)
The authorative source of the request frame size is client->req_len,
especially with big requests larger than 2^18 bytes.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1639>
(cherry picked from commit ef396a28b7)
These have been forgotten on some major cleanup back almost two decades ago.
(Daniel dropped a lot of dead code, which already had been removed earlier
but merged back accidentially).
Didn't look further back on where exactly they had become obsolete - being
unused for decades should be enough justification for dropping.
Fixes: 81913a1291
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1405>
(cherry picked from commit a1fa019012)
The cleanup function for GBM is called on the various error paths.
Once xwl_glamor_gbm_cleanup() has been called, GBM support is no longer
usable (and the corresponding data structures are freed), so there is
no way we can keep using GLAMOR after that point.
Make sure to explicitly disable GLAMOR support in that case, so we do
not crash later on trying to use GBM.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1768>
(cherry picked from commit e8784b7d89)
Consider the following keymap:
```xkb
xkb_keymap {
xkb_keycodes {
<compose> = 135;
};
xkb_symbols {
key <compose> {
[ SetGroup(group = +1) ]
};
};
};
```
When the user presses the compose key, the following happens:
1. The compositor forwards the key to Xwayland.
2. Xwayland executes the SetGroup action and sets the base_group to 1
and the effective group to 1.
3. The compositor updates its own state and sends the effective group,
1, to Xwayland.
4. Xwayland sets the locked group to 1 and the effective group to
1 + 1 = 2.
This is wrong since pressing compose should set the effective group to 1
but to X applications the effective group appears to be 2.
This commit makes it so that Xwayland completely ignores the key
behaviors and actions of the keymap and only updates the modifier and
group components in response to the wayland modifiers events.
Signed-off-by: Julian Orth <ju.orth@gmail.com>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1758>
(cherry picked from commit 45c1d22ff6)
Currently, Xwayland creates a pixmap backed by shared memory buffer as
soon as an X11 cursor is realized, which is destroyed when the cursor is
eventually unrealized.
If an X11 client is leaking cursors, Xwayland will be creating new
pixmaps continuously, which will eventually cause an error once the
limit is reached, and get Xwayland killed.
However, we do not need the shared memory buffer to stay around, we
already have the buffer retention mechanism which will take care of
keeping the buffer around until the Wayland compositor is done with it,
so we could just create and destroy the pixmap as needed when setting
the cursor.
That would not fix the leak in the X11 application, yet that would
mitigate the risk of Xwayland being killed by reaching the shared memory
limits, until the client itself reaches the limit of X11 resources.
v2: Don't increase the pixmap refcnt to destroy it just after (Michel)
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Suggested-by: Michel Dänzer <michel@daenzer.net>
See-also: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1773
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1754>
(cherry picked from commit 8707d2835c)
For the Wayland compositors who do not implement XkbBellNotifyMask but
support the Wayland protocol xdg-system-bell, use that to ring the
bell.
v2: Be more selective on the device, make sure it's a keyboard and it
has core events.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1742>
(cherry picked from commit e4804d11e8)
Found by Oracle Parfait 13.3 static analyzer:
Memory leak [memory-leak]:
Memory leak of pointer event allocated with calloc(1, 16)
at line 470 of hw/xfree86/drivers/modesetting/present.c in
function 'ms_present_unflip'.
event allocated at line 431 with calloc(1, 16)
event leaks when ms_present_check_unflip(...) == 0 at line 438
and i >= config->num_crtc at line 445
Fixes: 13c7d53df ("modesetting: Implement page flipping support for Present.")
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1730>
(cherry picked from commit bf63d9b34e)
Found by Oracle Parfait 13.3 static analyzer:
Memory leak [memory-leak]:
Memory leak of pointer optname allocated with asprintf(&optname,
"\"%s\"", p->name)
at line 326 of hw/xfree86/common/xf86Configure.c in function
'configureDeviceSection'.
optname allocated at line 309 with asprintf(&optname, "\"%s\"",
p->name)
Fixes: code inherited from XFree86
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1730>
(cherry picked from commit fa711c486a)
eglCreateSyncKHR takes ownership of the file descriptor. Noticed by
inspection.
While we're at it, move the fence_fd declaration to the scope where
it's used.
Last but not least, close the fd in xwl_glamor_wait_fence when bailing
before calling eglCreateSyncKHR, and document that it takes ownership.
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1712>
(cherry picked from commit 91b5a003a5)
This function is only called inside dri.c, not used by any drivers
(and wouldn't make sense to do so), so no need to keep it exported.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1713>
(cherry picked from commit 73cf8d3560)
Xwin's DestroyPixmap proc just free()s the PixmapRec directly, w/o catering
for devPrivate's, so leaving a memleak. The correct DIX function for this
is FreePixmap().
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1710>
(cherry picked from commit 9323ba6fed)
These code pieces have been commented out since their introduction back
almost two decades ago, so probably no need for them anymore.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1603>
(cherry picked from commit 78d420870f)
The only consumer seems to be one BSD specific file, the few drivers using
the *_iopl seem to include it on their own. Thus, no need to keep it in
public headers.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1420>
(cherry picked from commit bd40e9f836)
These only had been used by xf86-video-chips, but meanwhile this
defines them on it's own, so we can drop them from here now.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1420>
(cherry picked from commit 0560cb35ce)
On NetBSD gives warning:
In file included from /usr/include/ctype.h:100,
from ../hw/xfree86/common/xf86pciBus.c:35:
../hw/xfree86/common/xf86pciBus.c: In function ‘xf86ParsePciBusString’:
../hw/xfree86/common/xf86pciBus.c:286:27: warning: array subscript has type ‘char’ [-Wchar-subscripts]
286 | if (!isdigit(d[i])) {
| ^
../hw/xfree86/common/xf86pciBus.c:293:23: warning: array subscript has type ‘char’ [-Wchar-subscripts]
293 | if (!isdigit(p[i])) {
| ^
../hw/xfree86/common/xf86pciBus.c:307:23: warning: array subscript has type ‘char’ [-Wchar-subscripts]
307 | if (!isdigit(p[i])) {
| ^
../hw/xfree86/common/xf86pciBus.c:320:23: warning: array subscript has type ‘char’ [-Wchar-subscripts]
320 | if (!isdigit(p[i])) {
| ^
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1455>
(cherry picked from commit 43a57fc6e9)
On NetBSD gives warning:
In file included from /usr/include/ctype.h:100,
from ../hw/xfree86/common/xf86Option.c:39:
../hw/xfree86/common/xf86Option.c: In function ‘xf86NormalizeName’:
../hw/xfree86/common/xf86Option.c:915:25: warning: array subscript has type ‘char’ [-Wchar-subscripts]
915 | if (isupper(*p))
| ^
../hw/xfree86/common/xf86Option.c:916:32: warning: array subscript has type ‘char’ [-Wchar-subscripts]
916 | *q++ = tolower(*p);
| ^
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1455>
(cherry picked from commit 1f861bbb9d)
On NetBSD gives warning:
In file included from /usr/include/ctype.h:100,
from ../hw/xfree86/common/xf86Bus.c:36:
../hw/xfree86/common/xf86Bus.c: In function ‘StringToBusType’:
../hw/xfree86/common/xf86Bus.c:270:22: warning: array subscript has type ‘char’ [-Wchar-subscripts]
270 | if (isdigit(busID[0])) {
| ^
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1455>
(cherry picked from commit 99017bf948)
Even if the manual redirect didn't result in the surface window we
wanted, it might be different again without the redirect.
I don't know of any specific scenario hitting this though, it's more of
a theoretical safeguard.
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1637>
(cherry picked from commit 23dde0860c)
using EGL (e.g., eglQueryString, epoxy_has_egl_extension)
before establishing this connection
enables the GBM/EGL implementation to potentially consume the
WAYLAND_SOCKET fd, which, if closed, will cause the compositor
to kill this xserver
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1646>
(cherry picked from commit ff8ec59c97)
$ echo "#foo\nfoo" > custom_config $ X -config custom_config
will trigger the double free because the contents of xf86_lex_val.str
have been realloc()ed aready when free is called in read.c:209.
This copies the lex token and adds all the necessary free() calls to
avoid leaking it
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1176>
(cherry picked from commit fbc034e847)
The functions declared here aren't used by any driver, so no need to keep
them in the public driver API. Since the whole file isn't included by anybody
outside the xserver tree itself, it doesn't need to be installed at all,
so making it internal and move it to Xi directory.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1325>
(cherry picked from commit 03eb593460)
