If a front-buffer is requested for a window, add the fake front-buffer
to the list of requested buffers.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit aa2928325f)
Many old monitors zero-fill the detailed descriptors, so check for that
to avoid a useless warning like:
(WW) RADEON(0): Unknown vendor-specific block 0
(cherry picked from commit a2c5ee36b2)
Initialize the depth corresponding to the root window before the
pixmap-only depths. Otherwise you end up with the root window depth in
the depth list twice, which is mildly confusing for clients and
catastrophically confusing for PanoramiXConsolidate().
(cherry picked from commit 45530d1609)
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
(cherry picked from commit 1c101d75d4)
Signed-off-by: Keith Packard <keithp@keithp.com>
When xinerama is enabled we don't get randr protocol, but the
driver might still want randr internals
(cherry picked from commit faf7dfa099)
Signed-off-by: Keith Packard <keithp@keithp.com>
The references to this file in the server code were removed in commit dda10c9066
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
(cherry picked from commit d0dd649035)
Signed-off-by: Keith Packard <keithp@keithp.com>
A driver with this hook will take care of preparing the outputs & crtcs,
so calling the prepare functions will just cause unnecessary flicker.
Fixes bug #21077
(cherry picked from commit 94648bb797)
Signed-off-by: Keith Packard <keithp@keithp.com>
This panel reports its vertical size in cm.
X.Org bug#21000 <http://bugs.freedesktop.org/show_bug.cgi?id=21000>
Signed-off-by: Tormod Volden <debian.tormod@gmail.com>
Signed-off-by: Julien Cristau <jcristau@debian.org>
(cherry picked from commit b1dab580bd)
Signed-off-by: Keith Packard <keithp@keithp.com>
After the call to xf86ActivateDevice, the new device will be added to
inputInfo.devices. However, if the subsequent call to ActivateDevice
fails, the correponding InputInfoRec for the device is deleted but an
entry still remains in inputInfo.devices. This might lead to a server
crash later on (on InitAndStartDevices for instance) when the device
control proc would be called for an invalid device.
(cherry picked from commit efa31092d6)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This prevents building an older server with a new dri2proto.h from
resulting in a DRI2 extension module that lies about the version it
supports.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 44227ef1b7)
Signed-off-by: Keith Packard <keithp@keithp.com>
GLX_EXT_texture_from_pixmap was broken since commit
a26c77ff43 ('glx: fix retval checks when failures
occur for drawable creation.')
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
(cherry picked from commit ef320bdd5e)
Extensions section was added in X11R6.8.0 and documented in the release notes:
http://www.x.org/archive/X11R6.8.0/doc/RELNOTES2.html#3
but never made it into the man page.
Also fix a bonus typo.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
(cherry picked from commit ab61033700)
There is a separate panning region check, but that doesn't work under
transformation, so just pre-clip the mouse coordinates when computing the
panning offsets. This leaves the case where panning constants are changing
unresolved.
Signed-off-by: Keith Packard <keithp@keithp.com>
(cherry pick from commit c090f5514d)
Remove this now that clearing is done by repainting with appropriate extend
modes.
Signed-off-by: Keith Packard <keithp@keithp.com>
(cherry picked from commit 60a4f1368785d26a49a3ef6df829723ca154c154)
Signed-off-by: Keith Packard <keithp@keithp.com>
Figuring out how to adjust the crtc origin to keep the mouse pointer within
the crtc is a bit of a trick
Signed-off-by: Keith Packard <keithp@keithp.com>
(cherry picked from commit 63810aca31b962c93be4796883bde6ccb653e3a9)
Signed-off-by: Keith Packard <keithp@keithp.com>
Xorg shouldn't refuse to run just because the user has an xorg.conf that
had the previously-used RgbPath keyword in it.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
(cherry picked from commit d2cf562bba)
Signed-off-by: Keith Packard <keithp@keithp.com>
libXfont 1.4.0 no longer includes this file, nor do we need it, so just stop
attempting to reference it.
Signed-off-by: Keith Packard <keithp@keithp.com>
When the crtc transformation changes, the entire crtc must be repainted.
This was being done by clearing the shadow and then painting the rectangle
containing the screen image; the clear being required as the screen image
may not fill the crtc. When changing the transform rapidly, this leads to
flashing. Eliminate the clear by painting the entire crtc instead of just
the screen rectangle.
(cherry picked fom commit 5394b7e662)
Signed-off-by: Keith Packard <keithp@keithp.com>
The XKB base directory was not configuable through the config file.
(cherry picked from commit 76f18b94bd)
Signed-off-by: Keith Packard <keithp@keithp.com>
The builtin-fonts configure option was removed, as it at best should
have been a runtime option. Instead, now it always register all "font
path element" backends, and adds built-ins fonts at the end of the
default font path.
This should be a more reasonable solution, to "correct" the most
common Xorg FAQ (could not open default font 'fixed'), and also don't
break by default applications that use only the standard/historical
X Font rendering.
(cherry picked from commit 49b93df8a3)
Signed-off-by: Keith Packard <keithp@keithp.com>
Drivers not using the new hw/xfree86/modes code would crash in DRI due to
that code trying to monitor CRTC changes.
(cherry picked from commit ea309e4745)
Signed-off-by: Keith Packard <keithp@keithp.com>
With trying to match depths so that you didn't end up with a depth 24
fbconfig for the 32-bit composite visual, I broke the alpha bits on the depth
24 X visual, which angered other applications. But in fixing that, the
pickFBconfigs code for "minimal" also could end up breaking GLX visuals if
the same FBconfig was chosen for more than one X visual.
We have no reason to not expose as many visuals as possible, but the old
"all" mode didn't match any existing X visuals to GLX visuals, so normal
GL apps didn't work at all.
Instead, replace it with a simple combination of the two modes: Create GLX
visuals by picking unique FBconfigs with as many features as possible for
each X visual in order. Then, for all remaining FBconfigs that are
appropriate for display, add a corresponding X and GLX visual.
This gets all applications (even ones that aren't smart enough to do FBconfigs)
get all the options to get the visual configuration they want. The only
potential downside is that the composite ARGB visual is unique and gets a
nearly full-featured GLX visual (except that the root visual might have taken
the tastiest FBconfig), which means that a dumb compositing manager could
waste resources. Write compositing managers using FBconfigs instead, please.
(cherry picked from commit c40bad88475debf7a1774e22dce835577ad32154)
Signed-off-by: Keith Packard <keithp@keithp.com>
The warnings corrected were only the ones that should correct
real problems. The most common one is 64 bit integers as
"printf %l" arguments.
Note that there is a patch related to this at:
http://bugs.freedesktop.org/show_bug.cgi?id=18204
Signed-off-by: Keith Packard <keithp@keithp.com>
(cherry picked from commit 16b11cd03d)
The previous check for AEI on left us with the possibility that AEI is forced
off in the config, but devices are added through evdev nonetheless. A keyboard
added this way can CTRL+C the server. Even when we use kbd, we can set the
mode to RAW, so it's safer alround to to so.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
(cherry picked from commit b339052340)
Signed-off-by: Keith Packard <keithp@keithp.com>
By making the "Unable to open config file" header a warning, it was
not appearing with the filename when a config file was specified and
not found. Now we make it an error message again, but only issue
the error if a filename was specified - if none was specified, then
we don't even issue a warning, just the "Using autoconfig" info message.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
(cherry picked from commit bd713794ce)
Signed-off-by: Keith Packard <keithp@keithp.com>
This patch gets the shadow scanout buffer repainted on panning area changes.
It does not, however, track the mouse correctly.
Signed-off-by: Keith Packard <keithp@keithp.com>
(cherry picked from commit 7968823cbc)
Signed-off-by: Keith Packard <keithp@keithp.com>
When the shadow scanout buffer can be re-used, the underlying framebuffer
area must be damaged so that the scanout will be repainted. This patch
delays the addition of that damaged area until after the transform in the
crtc has been updated, otherwise the old transform would have been used and
the wrong area repainted.
Signed-off-by: Keith Packard <keithp@keithp.com>
(cherry picked from commit 763df9eec7)
Signed-off-by: Keith Packard <keithp@keithp.com>
Previously it is possible that creating rotation data, then cleaning
up and creating again so that pScreen->BlockHandler and
xf86_config->BlockHandler all point to xf86RotateBlockHandler.
See bug #19343.
(cherry picked from commit 5f3188228e)
Split DRICreateSurface into 3 functions.
Make CreateSurfaceForPixmap use xp_configure_surface. I suspect this is partly why
GLXPixmaps never worked.
It will require some more work and thoughts for pbuffers, unless we fake those with
pixmaps and surfaces.
(cherry picked from commit 9cf264e677)
Reorder some header files and provide some types earlier on.
Remove the static __GLXextensionInfo __glDDXExtensionInfo; that isn't
used in 1.4 or 1.5, and seems to have been removed from 1.6. Remove
the data structures associated with that too.
Remove __glXAquaDrawableResize. The GLX structure doesn't use
it anymore, and the Apple version did nothing useful before.
__glXAquaDrawableSwapBuffers(): base no longer contains a drawGlxc
member. Now provide the the Apple/Aqua context in the __GLXAquaDrawable
struct. Add the context member to the __GLXAquaDrawable struct.
Remove the fallback configs. They aren't used in 1.4 or 1.5 either.
Remove init_visuals(). It's not used in 1.4 or 1.5 either.
In the drawable constructor initialize the state properly, including
the new context member.
Remove glAquaResetExtension() -- it's not used anymore.
This has been tested remotely and proven to work with glxgears,
fire, various texture programs I wrote, and various Mesa demos.
(cherry picked from commit d514152195)
Use a __GLXconfig linked list struct to store the configurations for the
fbconfigs and visuals in a pGlxScreen.
Also, remove the __GLXvisualConfig/GlxSetVisualConfigs code that isn't used
anymore. There is more code we can remove later, but I want to do that in
separate commits.
(cherry picked from commit 94162b0f8a)
(cherry picked from commit 15bb6abd59)
http://www.mail-archive.com/pld-cvs-commit@lists.pld-linux.org/msg166742.html
contains a patch from "arekm" which I build upon to make up this one.
Mostly fixes for Xcalloc which I previously tried to fix the same way but
without finding the right spot.
I cannot tell if dmx works though. Only that it at least compile.
Signed-off-by: Keith Packard <keithp@keithp.com>
