Found by Oracle Parfait 13.3 static analyzer:
Memory leak [memory-leak]:
Memory leak of pointer event allocated with calloc(1, 16)
at line 470 of hw/xfree86/drivers/modesetting/present.c in
function 'ms_present_unflip'.
event allocated at line 431 with calloc(1, 16)
event leaks when ms_present_check_unflip(...) == 0 at line 438
and i >= config->num_crtc at line 445
Fixes: 13c7d53df ("modesetting: Implement page flipping support for Present.")
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1730>
(cherry picked from commit bf63d9b34e)
Found by Oracle Parfait 13.3 static analyzer:
Memory leak [memory-leak]:
Memory leak of pointer optname allocated with asprintf(&optname,
"\"%s\"", p->name)
at line 326 of hw/xfree86/common/xf86Configure.c in function
'configureDeviceSection'.
optname allocated at line 309 with asprintf(&optname, "\"%s\"",
p->name)
Fixes: code inherited from XFree86
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1730>
(cherry picked from commit fa711c486a)
eglCreateSyncKHR takes ownership of the file descriptor. Noticed by
inspection.
While we're at it, move the fence_fd declaration to the scope where
it's used.
Last but not least, close the fd in xwl_glamor_wait_fence when bailing
before calling eglCreateSyncKHR, and document that it takes ownership.
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1712>
(cherry picked from commit 91b5a003a5)
This function is only called inside dri.c, not used by any drivers
(and wouldn't make sense to do so), so no need to keep it exported.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1713>
(cherry picked from commit 73cf8d3560)
Xwin's DestroyPixmap proc just free()s the PixmapRec directly, w/o catering
for devPrivate's, so leaving a memleak. The correct DIX function for this
is FreePixmap().
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1710>
(cherry picked from commit 9323ba6fed)
These code pieces have been commented out since their introduction back
almost two decades ago, so probably no need for them anymore.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1603>
(cherry picked from commit 78d420870f)
The only consumer seems to be one BSD specific file, the few drivers using
the *_iopl seem to include it on their own. Thus, no need to keep it in
public headers.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1420>
(cherry picked from commit bd40e9f836)
These only had been used by xf86-video-chips, but meanwhile this
defines them on it's own, so we can drop them from here now.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1420>
(cherry picked from commit 0560cb35ce)
On NetBSD gives warning:
In file included from /usr/include/ctype.h:100,
from ../hw/xfree86/common/xf86pciBus.c:35:
../hw/xfree86/common/xf86pciBus.c: In function ‘xf86ParsePciBusString’:
../hw/xfree86/common/xf86pciBus.c:286:27: warning: array subscript has type ‘char’ [-Wchar-subscripts]
286 | if (!isdigit(d[i])) {
| ^
../hw/xfree86/common/xf86pciBus.c:293:23: warning: array subscript has type ‘char’ [-Wchar-subscripts]
293 | if (!isdigit(p[i])) {
| ^
../hw/xfree86/common/xf86pciBus.c:307:23: warning: array subscript has type ‘char’ [-Wchar-subscripts]
307 | if (!isdigit(p[i])) {
| ^
../hw/xfree86/common/xf86pciBus.c:320:23: warning: array subscript has type ‘char’ [-Wchar-subscripts]
320 | if (!isdigit(p[i])) {
| ^
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1455>
(cherry picked from commit 43a57fc6e9)
On NetBSD gives warning:
In file included from /usr/include/ctype.h:100,
from ../hw/xfree86/common/xf86Option.c:39:
../hw/xfree86/common/xf86Option.c: In function ‘xf86NormalizeName’:
../hw/xfree86/common/xf86Option.c:915:25: warning: array subscript has type ‘char’ [-Wchar-subscripts]
915 | if (isupper(*p))
| ^
../hw/xfree86/common/xf86Option.c:916:32: warning: array subscript has type ‘char’ [-Wchar-subscripts]
916 | *q++ = tolower(*p);
| ^
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1455>
(cherry picked from commit 1f861bbb9d)
On NetBSD gives warning:
In file included from /usr/include/ctype.h:100,
from ../hw/xfree86/common/xf86Bus.c:36:
../hw/xfree86/common/xf86Bus.c: In function ‘StringToBusType’:
../hw/xfree86/common/xf86Bus.c:270:22: warning: array subscript has type ‘char’ [-Wchar-subscripts]
270 | if (isdigit(busID[0])) {
| ^
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1455>
(cherry picked from commit 99017bf948)
Even if the manual redirect didn't result in the surface window we
wanted, it might be different again without the redirect.
I don't know of any specific scenario hitting this though, it's more of
a theoretical safeguard.
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1637>
(cherry picked from commit 23dde0860c)
using EGL (e.g., eglQueryString, epoxy_has_egl_extension)
before establishing this connection
enables the GBM/EGL implementation to potentially consume the
WAYLAND_SOCKET fd, which, if closed, will cause the compositor
to kill this xserver
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1646>
(cherry picked from commit ff8ec59c97)
$ echo "#foo\nfoo" > custom_config $ X -config custom_config
will trigger the double free because the contents of xf86_lex_val.str
have been realloc()ed aready when free is called in read.c:209.
This copies the lex token and adds all the necessary free() calls to
avoid leaking it
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1176>
(cherry picked from commit fbc034e847)
The functions declared here aren't used by any driver, so no need to keep
them in the public driver API. Since the whole file isn't included by anybody
outside the xserver tree itself, it doesn't need to be installed at all,
so making it internal and move it to Xi directory.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1325>
(cherry picked from commit 03eb593460)
This header includes libxfont2.h, but the dependency isn't stated anywhere,
causing some drivers to FTBS (when libxont2.h is in non-standard location).
Since this header doesn't seem to need including libxfont2.h at all, just
stop including it, instead of adding yet another dependency to server SDK.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1610>
(cherry picked from commit 646831cda2)
Most of the support for such OS'es was removed in 2010 for
xorg-server-1.10.0, but a few bits lingered on, and a few
comments were left out-of-date.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1667>
(cherry picked from commit f35951d83e)
Tidy it up a bit and split the actual request handler from the request
reading loop, making upcoming reworks easier to review (smaller diffs).
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1661>
(cherry picked from commit 0d3ae98661)
Make the code easier to read/understand by scoping variables to where
exactly they're needed. Also a preparation for subsequent reworks
(keep the diff smaller and thus easier to review)
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1661>
(cherry picked from commit 3597323d48)
This header makes use of types and functions defined in gcstruct.h and
privates.h. It should include them, instead of demanding it's consumers
having done that before including this file.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1659>
(cherry picked from commit 4db1da86fc)
It's safer to zero-out the cursor-private memory on allocation,
instead of relying on being cleared initialized somewhere later.
Fixes: 3f3ff971ec - Replace X-allocation functions with their C89 counterparts
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1652>
(cherry picked from commit 8d5584558f)
We alread have several of these calls, that aren't interested in result value,
explicitly casting to void. Fixing this up for the remaining ones.
This is helpful for the human reader as well as quality analysis tools.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1648>
(cherry picked from commit f26f17c66a)
The vidmode extension emulation in Xwayland reports the modeline based
on the current mode.
To do so, it searches for the mode using `xwl_output_find_mode(-1, -1)`
which is supposed to return the current mode, whatever that mode is.
With XRandR emulation, in rootless mode, the default value is the mode
at index 0. That assumption, however is not true when running rootful.
That means that the vidmode extension will always return the highest
mode available, which is 5120x2880, with Xwayland running rootful:
$ xwayland-run -geometry 1024x768 -- xvidtune -show
"5120x2880" 1276.50 5120 5560 6128 7136 2880 2883 2888 2982 -hsync +vsync
Luckily, when Xwayland is running rootful, we have the current mode size
conveniently stored in dedicated fields of the xwayland output struct,
so we can use that to search for the right mode being used and report
that through the vidmode extension:
$ xwayland-run -geometry 1024x768 -- xvidtune -show
"1024x768" 63.50 1024 1064 1176 1328 768 771 775 798 -hsync +vsync
That fixes legacy games using the vidmode extension and rendering at the
wrong size when running within Xwayland rootful.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1641>
(cherry picked from commit e2e5842444)
The code here assumed a `leave` event always occurs between two `enter`
events. On Sway (and presumably other compositors) this happens even if
the client has destroyed the `wl_surface`, but the client gets a null
`surface` here. (Which presumably on on the wire is the id of the
destroyed surface.)
This seems like a bad thing to rely on, and is easy to avoid. But if
this is correct to assume, the Wayland protocol should be explicit about
this.
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1527>
(cherry picked from commit 386b54fbe9)
Now that we won't enable DRI3 if <sys/eventfd.h> is not available, there
is not point in trying to include that header without DRI3.
That allows to build Xwayland with GLAMOR enabled (without DRI3) on
platforms which do not support eventfd.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1523>
(cherry picked from commit 23c295ea8b)
Currently, we would start dequeuing events as soon as a device is
resumed, regardless of its capabilities.
If the capabilities are not available, we would just fallback to the
regular XTEST code path and not use input emulation.
As a result, it is very likely that we shall lose the first events until
the compositor resumes first a device with the requested capabilities.
To avoid that issue, start emulating only once we have the requested
capabilities, if they match the seat capabilities.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1732
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1631>
(cherry picked from commit 0525b9a5b9)
This is a small code refactoring to help with clarity, simply move the
code from the switch case for device resume to a dedicated function.
No functional change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1631>
(cherry picked from commit 68ec297ee9)
This has been nothing but an alias for two decades now (somewhere in R6.6),
so there doesn't seem to be any practical need for this indirection.
The macro still needs to remain, as long as (external) drivers still using it.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1529>
(cherry picked from commit dec57e5796)
This has been nothing but an alias for two decades now (somewhere in R6.6),
so there doesn't seem to be any practical need for this indirection.
The macro still needs to remain, as long as (external) drivers still using it.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1529>
(cherry picked from commit f446235b71)
This has been nothing but an alias for two decades now (somewhere in R6.6),
so there doesn't seem to be any practical need for this indirection.
The macro still needs to remain, as long as (external) drivers still using it.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1529>
(cherry picked from commit 9ec31d1a88)
