Two names pointing to the same struct for over 7 years now. Remove the
define, if drivers don't want to change they can always do the typedef
themselves.
Rename all "LocalDevicePtr local" to "InputInfoPtr pInfo".
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Input driver messages are only standardised by convention, with the drivers
prefixing the device name to most messages. This makes it rather hard to
grep on "evdev" for example when looking for the evdev ouput.
This patch adds three new logging functions, modeled after xf86DrvMsg(), the
logging function for output drivers. New functions are
xf86IDrvMsg() - input driver log message in default verbosity.
xf86IDrvMsgVerb() - input driver log message in specified verbosity.
xf86VIDrvMsgVerb() - same as xf86IDrvMsgVerb() but takes a varargs
argument.
Default log format is <driver name>: <device name>: <message>.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Make xf86AllocateInput static in the process, this function is only called
from one location.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Right now, Xephyr and others don't get to use XKB on the slave devices.
Which works given that no-one cares about SDs just yet but event processing
is different if the ProcessInputProc isn't wrapped properly.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
From the documentation:
"This is mainly to allow a touch screen to be used with netscape and other
browsers which do strange things if the mouse moves between button down and
button up."
CLOSED - NOTOURBUG
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
PreInit returns a status code. Let's use that instead of having it report
Success in some cases but not set the XI86_CONFIGURED flag and thus signal
an init failure.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
These defines have been write-only for a while now.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
RegisterPointerDevice() and RegisterKeyboardDevice() were already mapped to
RegisterOtherDevice() and obsolete.
RegisterOtherDevice() was called for all devices and the two assignments can
simply be moved into AddInputDevice(). Purge RegisterOtherDevice() and
pretend it never happened.
*lalalalala*
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
ActivateGrab and DeactivateGrab are set in AddInputDevice() already.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
No-one but the joystick driver uses it and that one should be using NIDR
instead.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
config_info is the only reliable indicator we have in the server for
duplicate devices (drivers can test for maj/min on fds as well). Don't set
this after the device has been initialized but assume it's important enough
to set during NIDR.
This makes the option "config_info" available to the drivers as well.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
The main change introduced in this patch is the removal of the
back-and-forth between DDX and the driver.
The DDX now allocates the InputInfoRec and fills it with default values. The
DDX processes common options (and module-specific default options, if
appropriate) before passing the initialised struct to the driver.
The driver may do module-specific initializations and return Success or an
error code in the case of a failure.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Document that terminate is not mapped to Ctrl+Alt+Backspace by default, to help alleviate some confusion.
Signed-off-by: Jesse Adkins <jesserayadkins@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
../../../../hw/xfree86/common/xf86Xinput.c: In function ‘xf86AllocateInput’:
../../../../hw/xfree86/common/xf86Xinput.c:722: warning: implicit
declaration of function ‘DuplicateModule’
../../../../hw/xfree86/common/xf86Xinput.c:722: warning: nested extern
declaration of ‘DuplicateModule’
../../../../hw/xfree86/common/xf86Xinput.c:722: warning: assignment makes
pointer from integer without a cast
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
This was included in the original commit, and then never used.
Signed-off-by: Jesse Adkins <jesserayadkins@gmail.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
AUTOREPEAT_MSG, MOVED_TO_FLAGS_MSG, and XLEDS_MSG made obsolete by
81913a1291 Jul 21 2006 (remove undead files from master)
UNDEFINED_DEVICE_MSG made obsolete by
6033d8150b Oct 9 2007 (first pass at video driver autoloading)
Signed-off-by: Jesse Adkins <jesserayadkins@gmail.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
[mattst88: fixed whitespace and a missing semicolon]
Signed-off-by: Jesse Adkins <jesserayadkins@gmail.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Previously, the functions would call xf86VDrvMsgVerb with a screen of -1
despite their comments saying they were for "non-driver messages".
They now call LogVMessageVerb, which is what xf86VDrvMsgVerb does anyway
when it has a screen == -1.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Jesse Adkins <jesserayadkins@gmail.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
This was obsolete from 9a0f25de7c "Static cleanups, dead code deletion." (server 1.3).
Signed-off-by: Jesse Adkins <jesserayadkins@gmail.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
These are leftovers from when X still used Xmalloc and friends for allocation.
Now that those are gone, these comments are just confusing.
Signed-off-by: Jesse Adkins <jesserayadkins@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Right now, when there is more than one vide card on the machine, we're
adopting a pessimistic approach and setting all cards to decode VGA legacy
address.
Some cards may want to skip the arbitration and the only way to do so is
through pci_device_vgaarb_decodes. Therefore, send the desired kind of
resource instead force the worst case.
Note that xf86VGAarbiterDeviceDecodes is not being used so far by any
open-source driver. Even so, API break.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
This was inherited from RAC and was never used there either.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
A simple hack to accommodate various EDID who have detailed modes that
exceed the EDID's max pixel clock. The pixel clock is only defined in
units of 10MHz and often appears as the maximum pixel code of the
detailed modes, rounded to the nearest 10MHz. Adjusting the max_clock to
include an extra 5MHz prevents the parser from rejecting the detailed
modes.
The kernel uses the same fuzz and by including it in X we can use the
same modes in X as for the console.
Fixes:
Bug 23833 - X uses different refresh rate to that set by kernel module
https://bugs.freedesktop.org/show_bug.cgi?id=23833
In the future, we will want to try harder to keep the KMS modes but at
the same time we need to apply the restrictions as specified by the
user's configuration, and need to fill in modes for fullscreen games on
fixed-mode panels.
Reported-and-tested-by: Fabio Pedretti <fabio.ped@libero.it>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
We still have the issue with not raising the frontmost window for the case
when spaces is enabled, and the AppleSpacesSwitchOnActivate preference is
disabled.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
None of them do anything useful now that pointer acceleration is
entirely handled in the server. (Does not completely nuke yet,
since that would be an API/ABI break.)
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
When the parser sees the "keyboard" driver, it automatically (and
silently) replaces it with the constant string "kbd".
Everybody else uses malloc'd memory for the driver name, so input
device closure assumes it can use free.
Free val.str, so this crash doesn't turn into a memory leak. Whew.
Signed-off-by: Jesse Adkins <jesserayadkins@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Commit 9de0e31746 changed the signature
of __GLXScreen's createDrawable method.
Update the glxWinCreateDrawable() function in XWin's GLX provider
appropriately.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Mark argument to DDC_checksum as const too.
Signed-off-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
We were incorrectly NULLing out pDraw in __GLXDrawable instead of ours in
__GLXAquaDrawable. (we should refactor to eliminate this redundancy later)
This was causing http://xquartz.macosforge.org/trac/ticket/426
This was benign until commit f0006aa58f
The root cause of this change was fed7ccc481ad1caaa518cafe944c2327a5d0b6c65
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Bumps minimum xorg-macros requirement from 1.6 to 1.10
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Patrick E. Kane <pekane52@gmail.com>
Because some EnterVT code needs to remove it self from the
call chain, we need to fix all of the wrappers to correctly
unwrap/rewrap during the call chain. This is a follow-on to the fix
for bug 27114 in commit 68a9ee8370.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Jesse Barnes <jesse.barnes@intel.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
If a pixmap header is modified or the drawable serial changes, some
aspects of the drawable are likely to have changed so we should
re-allocate the corresponding DRI2 drawable in that case. This is one
way of catching when the root window pixmap changes through xrandr.
Fixes bug https://bugs.freedesktop.org/show_bug.cgi?id=28365.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Although vendor and board naming are used to create the configure file, the
server doesn't actually use it when fetching such file and probing devices.
Reported-by: Richard Barnette <jrbarnette@chromium.org>
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Tested-by: Richard Barnette <jrbarnette@chromium.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
X server suffers in startup time when relying on the pciaccess's linear search
to fetch vendor and video device name from PCI ID file (when existent). Such
names are only used to write the log, which may be superfluous. This
information often is provided by the drivers or likewise users can get the it
using external tools like lspci or scanpci.
This patch remove the references of those functions from X start up.
Reported-by: Richard Barnette <jrbarnette@chromium.org>
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Richard Barnette <jrbarnette@chromium.org>
Reviewed-by: James Cloos <cloos@jhcloos.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The allocated bus id string was not being freed.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
