v2: Dropped the hostx_load_keymap changes, now that that function is
gutted (anholt).
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net> (v1)
Signed-off-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
This isn't used anywhere.
v2: Rebase to the top of the patch series (anholt)
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net> (v1)
Signed-off-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
There's no reason to pass the data back out to the caller, since the
caller was dropping it on the floor. The original data is a CARD32,
so no need to mess with weird unsigned longs.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
The only cases that lead to !is_ok are already EPHYR_LOG_ERROR, and it
fixes set-but-unused compiler warnings.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
newer automake gets quite noisy about this.
hw/xfree86/ddc/Makefile.am:7: warning:
'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
and many more of these.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Simplifies code and reduces risk of overflow from converting length
field in X replies from words to bytes.
One call to _XEatData is left in ephyrHostGLXGetStringFromServer where
it's already been checked for overflow, and other values have been
subtracted from it to reduce the size of data remaining to be eaten.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
clientDriverNameLength is a CARD32 and needs to be bounds checked before
adding one to it to come up with the total size to allocate, to avoid
integer overflow leading to underallocation and writing data from the
network past the end of the allocated buffer.
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
busIdStringLength is a CARD32 and needs to be bounds checked before adding
one to it to come up with the total size to allocate, to avoid integer
overflow leading to underallocation and writing data from the network past
the end of the allocated buffer.
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
reply.length & reply.size are CARD32s and need to be bounds checked before
multiplying or adding to come up with the total size to allocate, to avoid
integer overflow leading to underallocation and writing data from the
network past the end of the allocated buffer.
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
ephyrvideo.c: In function 'ephyrPutVideo':
ephyrvideo.c:1009:42: warning: variable 'drw_h' set but not used
ephyrvideo.c:1009:31: warning: variable 'drw_w' set but not used
ephyrvideo.c:1009:20: warning: variable 'drw_y' set but not used
ephyrvideo.c:1009:9: warning: variable 'drw_x' set but not used
ephyrvideo.c: In function 'ephyrGetVideo':
ephyrvideo.c:1058:42: warning: variable 'drw_h' set but not used
ephyrvideo.c:1058:31: warning: variable 'drw_w' set but not used
ephyrvideo.c:1058:20: warning: variable 'drw_y' set but not used
ephyrvideo.c:1058:9: warning: variable 'drw_x' set but not used
ephyrvideo.c: In function 'ephyrPutStill':
ephyrvideo.c:1107:42: warning: variable 'drw_h' set but not used
ephyrvideo.c:1107:31: warning: variable 'drw_w' set but not used
ephyrvideo.c:1107:20: warning: variable 'drw_y' set but not used
ephyrvideo.c:1107:9: warning: variable 'drw_x' set but not used
ephyrvideo.c: In function 'ephyrGetStill':
ephyrvideo.c:1156:42: warning: variable 'drw_h' set but not used
ephyrvideo.c:1156:31: warning: variable 'drw_w' set but not used
ephyrvideo.c:1156:20: warning: variable 'drw_y' set but not used
ephyrvideo.c:1156:9: warning: variable 'drw_x' set but not used
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Robert Morell <rmorell@nvidia.com>
Use bytes_per_line and bits_per_pixel from the created XImage to fix
https://bugzilla.redhat.com/show_bug.cgi?id=518960
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
With this option passed, ephyr windows can be resized like normal
windows on the fly, without the need of an explicit parent window.
Signed-off-by: Daniel Martin <daniel.martin@secunet.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Found by parfait 1.1 code analyser:
Memory leak of pointer 'keymap' allocated with XGetKeyboardMapping(HostX.dpy, min_keycode, ((max_keycode - min_keycode) + 1), &host_width)
at line 861 of hw/kdrive/ephyr/hostx.c in function 'hostx_load_keymap'.
'keymap' allocated at line 845 with XGetKeyboardMapping(HostX.dpy, min_keycode, ((max_keycode - min_keycode) + 1), &host_width).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The formatter confused address operators preceded by casts with
bitwise-and expressions, placing spaces on either side of both.
That syntax isn't used by ordinary address operators, however,
so fix them for consistency.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
When Xephyr is embedded into another application (e.g. in xoo), the
input events may come from the parent Window instead of our own. So make
sure we find the host screen in that case as well instead of crashing.
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Similar to how we intercept and pass through CreateContext, also pass
through newer CreateNewContext requests.
Fixes Clutter → Xephyr → VirtualBox.
Signed-off-by: Frederic Plourde <frederic.plourde@collabora.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
We need to pass these requests through to the host server in the same
way we do glXMakeCurrent. Generalise the existing MakeCurrent
submission into once that will send MakeCurrent, MakeContextCurrent or
MakeCurrentReadSGI, depending on the request and the host server's
capabilities, and add decoding/hijack support for incoming
MakeContextCurrent and MakeCurrentReadSGI requests.
Fixes Clutter → Xephyr → VirtualBox.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The indenter seems to have gotten confused by initializing arrays of
structs with the struct defined inline - for predefined structs it did
a better job, so match that.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Bugzilla: https://bugs.freedesktop.org/25804
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Vic Lee <llyzs@163.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
No-one ever did anything with this variable except assign its default
value to it.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Rather than building the tiny amount of code required for XFree86-DRI as
an external module, build it in if it's enabled at configure time.
v2: Fix test/Makefile.am to only link libdri.la if DRI is set
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
fixup for DRI1 move
Signed-off-by: Keith Packard <keithp@keithp.com>
ephyrGLXQueryServerString() carefully allocated a buffer padded to the
word-aligned string length for sending to the client, copied the string
to it, and then forgot to use it, potentially reading a few bytes of
garbage past the end of the server_string buffer.
Since WriteToClient already handles the necessary padding, just send
it the actual length of the original server_string, and don't bother
making a padded copy.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
When passing variable pointers to functions or otherwise doing long
sequences to compute values for replies, create & use some new
temporary variables, to allow for simpler initialization of reply
structures in the following patches.
Move memsets & other initializations to group with the rest of the
filling in of the reply structure, now that they're not needed so
early in the code path.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Casting return to (void) was used to tell lint that you intended
to ignore the return value, so it didn't warn you about it.
Casting the third argument to (char *) was used as the most generic
pointer type in the days before compilers supported C89 (void *)
(except for a couple places it's used for byte-sized pointer math).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
This is strictly the application of the script 'x-indent-all.sh'
from util/modular. Compared to the patch that Daniel posted in
January, I've added a few indent flags:
-bap
-psl
-T PrivatePtr
-T pmWait
-T _XFUNCPROTOBEGIN
-T _XFUNCPROTOEND
-T _X_EXPORT
The typedefs were needed to make the output of sdksyms.sh match the
previous output, otherwise, the code is formatted badly enough that
sdksyms.sh generates incorrect output.
The generated code was compared with the previous version and found to
be essentially identical -- "assert" line numbers and BUILD_TIME were
the only differences found.
The comparison was done with this script:
dir1=$1
dir2=$2
for dir in $dir1 $dir2; do
(cd $dir && find . -name '*.o' | while read file; do
dir=`dirname $file`
base=`basename $file .o`
dump=$dir/$base.dump
objdump -d $file > $dump
done)
done
find $dir1 -name '*.dump' | while read dump; do
otherdump=`echo $dump | sed "s;$dir1;$dir2;"`
diff -u $dump $otherdump
done
Signed-off-by: Keith Packard <keithp@keithp.com>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Required in order to build with Studio cc now that xorg-macros is
setting -errwarn=E_FUNC_HAS_NO_RETURN_STMT since a bug in the Solaris
system headers causes the noreturn attribute to not be correctly
applied to the exit() prototype in <stdlib.h> when building with
Studio instead of gcc.
Otherwise compiler exits with errors:
"Display.c", line 65: Function has no return statement : x_io_error_handler
"hostx.c", line 341: Function has no return statement : x_io_error_handler
Uses Studio-specific pragma instead of adding another exit() prototype
with a noreturn attribute to avoid causing gcc to warn about having
a redundant prototype for the exit() function.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
This batch is the straightforward set - others are more complex and
need more analysis to determine right size to pass.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
