This fixes a build failure I found on tinderbox.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
(cherry picked from commit f641e4b34a)
Conflicts:
hw/xquartz/GL/Makefile.am
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
High resolution devices was generating integer overflow.
For instance the wacom Cintiq 21UX has an axis value up to
87000. Thus the term (dSx * (Cx - Rxlow)) is greater than
MAX_INT32.
Using 64bits integer avoids such problem.
Signed-off-by: Philippe Ribet <ribet@cena.fr>
Signed-off-by: Benjamin Tissoires <tissoire@cena.fr>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
(cherry picked from commit a780e5b363)
Assume that a mode can be used in either landscape or portrait
orientation. I suppose the correct thing to do would be to
collect all the supported rotations from the CRTCs that can be used
with a specific output, but that information doesn't seem to be
readily available when these checks are done. So just assume that
either orientation is fine.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
(cherry picked from commit 2e781457d4)
(cherry picked from commit aec278eb65)
Like some other LPL panels, this one reports the vertical size in cm rather
than mm.
Patch taken from Launchpad bug #380009 <https://launchpad.net/bugs/380009>
X.Org Bug 28414 <https://bugs.freedesktop.org/show_bug.cgi?id=28414>
Signed-off-by: Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
(cherry picked from commit 4b88c7be8d)
cc2c73ddcb4370a7c3ad439cda4da825156c26c9's three-cent titanium tax
doesn't go too far enough. Fix the rest of the call and jmp
instructions to handle the data prefix correctly.
Reference: Intel 64 and IA-32 Architectures Software Developer's Manual
Volume 2A: Instruction Set Reference, A-M
http://www.intel.com/Assets/PDF/manual/253666.pdf
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
(cherry picked from commit bb18f27715)
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=24348
Before (data flag ignored -> broken):
66 DATA:
e944f1 JMP 1ff6
After (fixed):
66 DATA:
e944f1ffff JMP 00001ff8
This subtle difference in the length of decoded instruction meant
that the VBE call jumped to the routine setting AX=0x14F (VBE Failed)
instead of the routine that set AX=0x4F (VBE success).
The ability to run the same code in vm86 significantly aided the
debugging of this issue. Those X.org developers who would like to drop
vm86 better take special care towards _all_ vesa bugs, as those will
expose further issues.
Patch applies easily to even xserver 1.4.2.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Tested-by: Luc Verhaegen <libv@skynet.be>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
(cherry picked from commit cc2c73ddcb)
screenInfo.numScreens is not a valid screen number, they go from 0 to
numScreens - 1.
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
(cherry picked from commit 279ef1ffd7)
screenInfo.numScreens is not a valid screen number, they go from 0 to
numScreens - 1.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
(cherry picked from commit 8684543021)
This fixes a gamma issue on vt switch observed with KDM. VT switching away
and back would result in a black screen. Avoid this by storing the current
gamma information on init.
https://bugzilla.redhat.com/show_bug.cgi?id=533217
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
(cherry picked from commit 566d09a5cd)
When entering the VT, re-apply the saved gamma settings for each screen.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
(cherry picked from commit c050aa2f5f)
For whatever reason, some (broken) monitors will crash if you do this.
We're not actually using this information for anything, so let's just
not do it.
Originally reported as http://bugzilla.redhat.com/620333
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
(cherry picked from commit d2064fbb68)
crtc->{x,y} is always 0 when xf86DefaultScreenLimits() is called, so we
calculate too small an area for the initial framebuffer and force a resize
to happen.
This commit fixes the code to use desired{X,Y} instead, which contains the
initial output positions.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
(cherry picked from commit f7af00e9f0)
Commit 77c7a64e88 was introduced to fix
a cursor off by one on Intel hw, however it also move the whole crtc
into an off by one position and you could see gnom-eshell overlapping.
This commit reverts that and instead fixes the cursor hotspot
translation to work like pixman does. We add 0.5 to the cursor vector
before translating, and floor the value afterwards.
Thanks to Soeren (ssp) for pointing out where the real problem was
after explaning how pixman translates points.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
(cherry picked from commit 80d1a548d6)
Because some EnterVT code needs to remove it self from the
call chain, we need to fix all of the wrappers to correctly
unwrap/rewrap during the call chain. This is a follow-on to the fix
for bug 27114 in commit 68a9ee8370.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Jesse Barnes <jesse.barnes@intel.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
(cherry picked from commit d75e8146c4, and
conflict from b618705 fixed up)
Signed-off-by: Julien Cristau <jcristau@debian.org>
When resetting the server, pScrn->EnterVT must be unwrapped or the
next server generation will end up wrapping the wrapper and causing an
infinite recursion on EnterVT.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Michael Stapelberg <michael+freedesktop@stapelberg.de>
(cherry picked from commit 68a9ee8370)
When the parser sees the "keyboard" driver, it automatically (and
silently) replaces it with the constant string "kbd".
Everybody else uses malloc'd memory for the driver name, so input
device closure assumes it can use free.
Free val.str, so this crash doesn't turn into a memory leak. Whew.
Signed-off-by: Jesse Adkins <jesserayadkins@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
(cherry picked from commit bce12f2956)
A simple hack to accommodate various EDID who have detailed modes that
exceed the EDID's max pixel clock. The pixel clock is only defined in
units of 10MHz and often appears as the maximum pixel code of the
detailed modes, rounded to the nearest 10MHz. Adjusting the max_clock to
include an extra 5MHz prevents the parser from rejecting the detailed
modes.
The kernel uses the same fuzz and by including it in X we can use the
same modes in X as for the console.
Fixes:
Bug 23833 - X uses different refresh rate to that set by kernel module
https://bugs.freedesktop.org/show_bug.cgi?id=23833
In the future, we will want to try harder to keep the KMS modes but at
the same time we need to apply the restrictions as specified by the
user's configuration, and need to fill in modes for fullscreen games on
fixed-mode panels.
Reported-and-tested-by: Fabio Pedretti <fabio.ped@libero.it>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
(cherry picked from commit 951605b466)
While VT-switched, FB access is disabled and should remain so. Trying to switch
modes in that state would re-enable it, potentially causing crashes if trying
to access it before the driver has recovered from the mode switch.
Signed-off-by: Pierre-Loup A. Griffais <pgriffais@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
(cherry picked from commit 41bdb6c003)
Signed-off-by: Julien Cristau <jcristau@debian.org>
Upon resume, X may try to dereference a null pointer, which has been
reported in Debian bug #507916 (http://bugs.debian.org/507916).
Jim Paris came up with a patch which solves the problem for him. Here's
a (hopefully) fixed version of his patch (without the typo).
Cc: Jim Paris <jim@jtan.com>
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Reviewed-By: Matthias Hopf <mhopf@suse.de>
Signed-off-by: Keith Packard <keithp@keithp.com>
(cherry picked from commit fa6c701257)
GetPairedDevice() may not always return the keyboard, resulting in a
null-pointer dereference when accessing the XKB state.
For floating devices, the GetMaster() returns the device itself.
X.Org Bug 27573 <http://bugs.freedesktop.org/show_bug.cgi?id=27573>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Tested-by: Ben Hutchings <ben@decadent.org.uk>
(cherry picked from commit 10de9e8ee3)
<rdar://problem/7989690>
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Edward Moy <emoy@apple.com>
(cherry picked from commit ecfeabec8d)
The middle mouse clicks return erroneous values after returning from
Fast User Switching.
<rdar://problem/7979468>
http://xquartz.macosforge.org/trac/ticket/389
Signed-off-by: Martin Otte <otte@duke.edu>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Edward Moy <emoy@apple.com>
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
(cherry picked from commit a911292c85)
commit 206531f75c added localization files
for ar, add them to the Makefile.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
(cherry picked from commit 72758287f7)
Fixes a crash in XIQueryDevice which calls strlen on a NULL pointer.
#0 strlen () at ../sysdeps/x86_64/strlen.S:31
#1 0x00000000004c16ed in SizeDeviceInfo (dev=0x969bd0)
at ../../Xi/xiquerydevice.c:204
#2 0x00000000004c1a01 in ProcXIQueryDevice (client=0xa57510)
at ../../Xi/xiquerydevice.c:98
Debian bug#575905 <http://bugs.debian.org/575905>
Reported-by: "Bernhard R. Link" <brlink@debian.org>
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
(cherry picked from commit 0e7703f9b1)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
See option_sends_alt in Xquartz(1)
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Kevin Van Vechten <kvv@apple.com>
(cherry picked from commit 840d12c7a6)
vga arbiter will be locked in one device while AbortDDX will call LeaveVT
routines from the other device. Fail!
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
(cherry picked from commit b9ad452ec9)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There are keycodes > 193 in evdev, e.g. KEY_WIMAX which is 246 .
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Adam Jackson <ajax@nwnk.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
(cherry picked from commit e086b99c1f)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Pierre-Loup A. Griffais <pgriffais@nvidia.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
(cherry picked from commit 6b09f66d8c)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Fix a regression in 9c9c3a85b0
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Acked-by: Adam Jackson <ajax@redhat.com>
(cherry picked from commit 28a5f14b40)
This should make 'Unicode Hex Input' work as an input layout.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Acked-by: Adam Jackson <ajax@redhat.com>
(cherry picked from commit 339207be6f)
The problem is that the xf86_use_hw_cursor(_argb) functions may get this
correctly now, some drivers will replace these generic versions with their
own functions. It is pretty insane to expect them to do reference counting
of the cursor (as an example, look at driver/xf86-video-vmware to see how
that looks like as a workaround). There are even places in xserver itself
which replace these two functions.
The segfaults if no reference counting is done are caused because the
reference count of the cursor reached zero, hence the cursor was freed,
however xf86CursorEnableDisableFBAccess() brought it back to life from
the dead (from the SavedCursor).
This patch hence adds reference counting in xf86CursorSetCursor. As per Michel
Daenzer's suggestion, also free the cursor upon xf86CursorCloseScreen.
In theory with this it should be possible to remove the reference
counting in the UseHwCursor functions I think, though it should also be
safe to keep them.
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
(cherry picked from commit 67a8c659f2)
Confine xpbproxy to a single thread
Runs inside its own CFRunLoop
Signed-off-by: Jeremy Huddleston <jeremyhu@freedesktop.org>
(cherry picked from commit 69869d79f4c21eb385ff3c64bac649d93c7dd2ad)
Move RandRInit to where it will need to be (not yet implemented)
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
(cherry picked from commit 7da4f9df9c6490e3e604c170415d5af2d8c8ff29)
I'm not quite sure why this was necessary, but DDXRingBell is being called
from CoreKeyboardBell, so we don't need a separate bellProc which would
result in multiple rings.
This reverts commit 7e7e7935ee.
Conflicts:
hw/xquartz/quartzKeyboard.c
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
With 1.7 if you try and send a DRI2Connect with this value set
to anything but 0, the server will segfault due to the strlen
in the function this returns to, since BadValue != FALSE.
Fixed via other work in 1.8.
Signed-off-by: Dave Airlie <airlied@redhat.com>
When the compat output is missing (I don't think this is actually
possible), or is disabled (and hence has no crtc), we would like to
avoid dereferencing NULL pointers. This patch creates inline functions
to extract the current compat output, crtc or associated RandR crtc
structure, carefully checking for NULL pointers everywhere.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
(cherry picked from commit de86a3a344)
When generating sound buffers for /dev/audio bells, insert waveform
for beep *or* silence, but not both, so we don't write one entry past
the end of the iov buffer when the final bit of soundwave ends up in
the final entry allocated in the iov array.
Fixes OpenSolaris bug 6894890:
http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6894890
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This is RAC's remnant. Any sane person would use a more wise method of
debugging instead.
X.Org Bug 26074 <http://bugs.freedesktop.org/show_bug.cgi?id=26074>
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
(cherry picked from commit 5e81078cf5)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
