Fixes DRI2 client driver name mapping for newer AMD GPUs with the
modesetting driver, allowing the DRI2 extension to initialize.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ac2f27f1a9)
FatalError ends up calling xf86CloseConsole itself, so calling FatalError
from within xf86CloseConsole is not a good idea.
Make switch_to log errors using xf86Msg(X_WARNING, ...) and return success
(or failure).
This makes switch_to match the other error checking done in xf86CloseConsole
which all logs warnings and continues.
Add checking of the return value in xf86OpenConsole and call
FatalError there when switch_to fails, to preserve the error-handling
behavior of xf86OpenConsole.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1269210
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
(cherry picked from commit 2092f12a24)
Check for integer overflow before using stuff->count in a multiplication,
to avoid compiler optimizing out due to undefined behaviour, but only
after we've checked to make sure stuff->count is in the range of the
request we're parsing.
Reported-by: jes@posteo.de
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
(cherry picked from commit 6ca496b7c3)
The correct refresh rate for this mode is 75, not 85.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit 98e170971c)
When xf86RandR12Key is not set we will not get to the places where
these tests are done as the functions in question are not called.
In most cases we would have crashed before these checks anyway.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
(cherry picked from commit 3cd7d33380)
The X server frequently deals with SIGIO and SIGALRM interruptions.
If process execution is inside certain blocking system calls
when these signals arrive, e.g. with the kernel blocked on
a contended semaphore, the system calls will be interrupted.
Some system calls are automatically restartable (the kernel re-executes
them with the same parameters once the signal handler returns) but
only if the signal handler allows it.
Set SA_RESTART on the signal handlers to enable this convenient
behaviour.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
(cherry picked from commit 94ab7455ab)
<termio.h> is obsolete. Using <termios.h> instead fixes building with
musl libc.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Felix Janda <felix.janda@posteo.de>
(cherry picked from commit e8e3368298)
some X manuals use then escape sequence \/ when they want to render
a slash. That's bad because \/ is not a slash but an italic
correction, never producing any output, having no effect at all in
terminal output, and only changing spacing in a minor way in typeset
output.
Signed-off-by: Matthieu Herrb <matthieu@herrb.eu>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
(cherry picked from commit 634e357be2)
Fixes mmap failures with 32-bit builds.
Signed-off-by: Michel Dänzer <michel@daenzer.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
(cherry picked from commit 145ae03814)
The code in drmmode_set_cursor does not properly handle the case where
drmModeSetCursor2 returns any other error than EINVAL and silently fails to set
a cursor.
So only return when the drmModeSetCursor2 succeeds (i.e returns 0) and disable
the cursor2 usage on EINVAL.
References: https://bugzilla.redhat.com/show_bug.cgi?id=1205725
Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com>
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
(cherry picked from commit c3ce9d8fd4)
If no compat_output is defined, we inadvertently (attempt to) return
whatever data is at index -1. Instead, return NULL since that's what
callers are expecting.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
(cherry picked from commit 28159eff6b)
At the moment, the X server uses a non-default timeout for D-Bus
messages to systemd-logind. The only timeouts normally used with
D-Bus are:
1) Infinite
2) Default
Anything else is just as arbitrary as Default, and so rarely makes
sense to use instead of Default.
Put another way, there's little reason to be fault tolerant against
a local root running daemon (logind), that in some configurations, the
X server already depends on for proper functionality.
This commit changes systemd-logind to just use the default timeouts.
Downstream-bug: https://bugzilla.redhat.com/show_bug.cgi?id=1209347
Signed-off-by: Ray Strode <rstrode@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
(cherry picked from commit b1029716e4)
It's possible to receive a message reply in the message filter if a
previous message call timed out locally before the reply arrived.
The message_filter function only handles signals, at the moment, and
does not properly handle message replies.
This commit changes the message_filter function to filter out all
non-signal messages, including spurious message replies.
Downstream-bug: https://bugzilla.redhat.com/show_bug.cgi?id=1209347
Signed-off-by: Ray Strode <rstrode@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
(cherry picked from commit 792e925167)
Non serverfd input devices will never get a systemd-logind dbus resume signal,
causing them to never get re-enabled.
This commit changes xf86VTEnter() to enable them immediately, fixing this.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=89756
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
(cherry picked from commit 21e7d2bb5c)
xf86platformProbeDev creates GPU screens for any platform devices that were not
matched by a GDev in the loop above, but only if there was at least one device.
This means that it's impossible to configure a device as a GPU screen if there
is only one platform device that matches that driver.
Instead, create a GPU screen (if possible) for any platform device that was not
claimed by the GDev loop.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@ubuntu.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e36236eade)
If a PCI entity is found, xf86_check_platform_slot performs a device ID check
against the xf86_platform_device passed in. However, it just returns
immediately without checking the rest of the entities first. This leads to this
situation happening:
1. The nvidia driver creates an entity 0 with bus.type == BUS_PCI
2. The intel driver creates entity 1 for its platform device, opening
/dev/dri/card0
3. xf86platformProbeDev calls probeSingleDevice on the Intel platform device,
which calls doPlatformProbe, which calls xf86_check_platform_slot.
4. xf86_check_platform_slot compares the Intel platform device against the
NVIDIA PCI entity. Since they don't have the same device ID, it returns
TRUE.
5. doPlatformProbe calls xf86ClaimPlatformSlot, which creates a duplicate entity
for the Intel one.
Fix this by only returning FALSE if the PCI ID matches, and continuing the loop
otherwise. In the scenario above, this allows it to continue on to find the
Intel platform device that matches the second entity.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@ubuntu.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4ecda36259)
pci_device_map_legacy returns 0 on success.
Signed-off-by: Jürg Billeter <j@bitron.ch>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
(cherry picked from commit 0a78b599b3)
Gcc5 adds additional lines stating line numbers before and
after __attribute__() which need to be skipped.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Tested-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
(cherry picked from commit 21b896939c)
Currently when the ddx does not set any driver name we set DRI2 driver but
not the VDPAU driver name. The result is that VDPAU drivers will not get found
by libvdpau when the modesetting driver is being used.
Just assume that the VDPAU driver matches the DRI2 driver name, this is true
for nouveau, r300, r600 and radeonsi i.e all VDPAU drivers currently supported
by mesa.
Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
All of our checks for what crtc we are on take rotation into account so we
select the correct crtc. The only problem is that we weren't returning it
we were rotated. This caused X to think DRI3 apps were not on any crtc and
limit them to 1 FPS.
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This replaces the stubs for shadow buffer creation/allocation with actual
functions and adds a shadow_destroy function. With this, we actually get
shadow buffers and RandR now works properly. Most of this is copied from
the xf86-video-intel driver and modified for modesetting.
v2 Jason Ekstrand <jason.ekstrand@intel.com>:
- Fix build with --disable-glamor
- Set the pixel data pointer in the pixmap header for dumb shadow bo's
- Call drmmode_create_bo with the right bpp
v2 Jason Ekstrand <jason.ekstrand@intel.com>:
- Make shadow buffers per-crtc and leave shadow_enable alone
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The original drmmode_glamor_new_screen_pixmap function was specific to the
primary screen pixmap. This commit pulls the guts out into a new, more
general, drmmode_set_pixmap_bo function for setting a buffer on a pixmap.
The new function also properly tears down the glamor bits if the buffer
being set is NULL. The drmmode_glamor_new_screen_pixmap function is now
just a 3-line wrapper around drmmode_set_pixmap_bo.
v2 Jason Ekstrand <jason.ekstrand@intel.com>:
- Re-arranged code in drmmode_set_pixmap_bo and
drmmode_glamor_handle_new_screen_pixmap so that glamor_set_screen_pixmap
only gets called for the screen pixmap
- Guard the call to glamor_set_screen_pixmapa with a drmmode->glamor check
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
As a DDX may declare offload support without supporting DRI2
(because it is using an alternative acceleration mechanism like DRI3),
when iterating the list of offload_source Screens to find a matching
DRI2 provider we need to check before assuming it is DRI2 capable.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88514
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
If the BlockHandler chain is modified while it is active, we need to
re-fetch the current value and store it in our private for use the
next time through.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
In the new KMS APIs, the legacy drmModeSetCursor ioctl actually waits
for a vblank after changing the cursor image before returning, meaning
that the X server, in attempting to hide the cursor before updating
its image, actually makes that hide *visible* for a full vblank.
It's unknown why the X server does this by default, but turn it off.
If we're with a legacy driver that doesn't support the modern
drmModeSetCursor by waiting for a vblank before returning, we're going
to get a tiny bit of tearing on the cursor plane. But between tearing
with a new cursor image and tearing with a blank cursor image, I'd
rather the former.
The only proper solution to this is an atomic ioctl that page flips
all planes, including the cursor plane, at vblank time and at the same
time.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
If the suid wrapper is enabled, /usr/bin/Xorg is just a shell script that
execs either /usr/libexec/Xorg.bin directly or the Xorg.wrap binary which then
execve's /usr/libexec/Xorg.bin.
Either way, we end up with Xorg.bin, which is problematic for two reasons:
* ps shows the command as Xorg.bin
* _COMM and _EXE in systemd's journal will both show Xorg.bin as well
There's not much we can do about the path, but having the actual command stay
as Xorg means better compatibility to existing scripts. And, the reason for
this path: the command
journalctl _COMM=Xorg
works universally, regardless of whether the wrapper is used or not.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
present.c: In function 'ms_present_flush':
present.c:204:9: error: implicit declaration of function
'glamor_block_handler'
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87858
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
modesetting hooked up vblank support for DRI2, but was missing support
for vblanks in Present.
This is mostly copy and pasted from Keith's code in the intel driver.
v2: Use ms_crtc_msc_to_kernel_msc in ms_present_queue_vblank to hook
up the vblank_offset workaround for bogus MSC values (which the
DRI2 code already did).
Also simplify the ms_present_get_crtc function. vblank.c already
implements the functionality; we just need to convert types.
v3: Fix ms_flush_drm_events return code. I'd copied code where 0 meant
success into a function that returned a boolean, so the return code
was always backwards.
Also add DebugPresent calls in ms_present_vblank_{handler,abort}.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
We basically want it throughout the driver.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
crtc->enabled is insufficient; we should also make sure DPMS is on.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
We don't want to try to vblank synchronize to monitors which are off.
In order to handle that properly, we need to know the CRTC's DPMS mode.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Call drmModeDirtyFB and check the return value to detect whether the
driver support for damage tracking is present, only initialize it in
that case.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
dispatch_dirty_region was only returning -EINVAL error codes,
otherwise it would return 0. The kernel returns -ENOSYS when the
driver doesn't support damage tracking, so dispatch_dirty would never
see the error and never disable damage tracking.
Pass all errors back from dispatch_dirty_region and let dispatch_dirty
deal with them.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Gets rid of gcc 4.8 warnings:
xf86AutoConfig.c:211:9: warning: nested extern declaration of
'xf86SolarisFbDev' [-Wnested-externs]
sun_VTsw.c:44:1: warning: no previous prototype for 'xf86VTRelease'
[-Wmissing-prototypes]
sun_VTsw.c:59:1: warning: no previous prototype for 'xf86VTAcquire'
[-Wmissing-prototypes]
and ensures caller & definition stay in sync.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This just calls the existing function to create the relevant Xv
adaptor and hook it up.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Hidden cursors also have their image updated; re-enabling the cursor
each time the image is set will cause it to re-appear.
* Unifies the code that was in drmmode_load_cursor_argb and
drm_mode_show_cursor and moves it to a new drmmode_set_cursor
* Add a new boolean, 'cursor_up', to the per-crtc
private data to track whether the cursor should be displayed.
* Call drmmode_set_cursor from drm_mode_show_cursor and, if
the cursor should be displayed, from drm_mode_load_cursor_argb.
v2: Call drmModeSetCursor2 when loading a new cursor image if the
cursor should be displayed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Solaris already makes the page at address 0 inaccessible by default to
catch NULL pointer bugs, we don't need a double secret undocumented flag
to try to make our own hacky attempt at it.
As a bonus, deleting this code removes gcc warning of:
sun_init.c: In function 'xf86OpenConsole':
sun_init.c:103:17: warning: declaration of 'fd' shadows a previous local [-Wshadow]
int fd = -1;
^
sun_init.c:89:9: warning: shadowed declaration is here [-Wshadow]
int fd;
^
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
For performance, Glamor wants to render to tiled buffers, not linear
ones. Using GBM allows us to pick the 3D driver's preferred tiling
modes.
v2: Declare drmmode->gbm as void * if !GLAMOR_HAS_GBM.
v3: Just use a forward declaration of struct gbm_device.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
This code is going to be extended to support GBM BOs soon. This small
abstraction removes a lot of direct dumb_bo access, so we can add that
support in one place, rather than putting conditionals at every
pitch/handle/etc access.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
The drm kernel API for dumb BOs apparently doesn't include an unmap
ioctl, so we can't do much here. It looks like this code was copied
from libkms, which was also unfinished.
We may as well delete the dead variable that simply gets incremented
and never read.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Eventually, drmmode_display will be able to use GBM for handling
buffers, and won't need dumb_bo. Keeping the display related logic
and buffer object abstraction in separate files seems a bit tidier.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
This will need to change when we add GBM support; by pulling it into a
helper function, we should only have to edit one place.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Both branches called ModifyPixmapHeader with essentially the same
parameters. By using new_pixels in the shadowfb case, we can make
them completely the same, and move them out a level, for simplicity.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
The _ext variant takes an additional pointer argument, which it now
ignores, thanks to Keith's recent patches.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
ProcDRI2GetBuffers() tries to validate a length field (count).
There is an integer overflow in the validation. This can cause
out of bound reads and memory corruption later on.
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
drmmode_output_init() doesn't touch (the int*) num_dvi and num_hdmi.
Remove both parameters.
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
We don't define HAVE_UDEV, that's a remnant from xf86-video-modesetting.
But, we have CONFIG_UDEV_KMS.
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
If we don't glamor_egl_create_textured_screen_ext() in
drmmode_xf86crtc_resize() we end up with a black screen and no client
window(s) visible.
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
