xserver/hw/xfree86/drivers/modesetting/drmmode_display.h

209 lines
6.7 KiB
C
Raw Normal View History

/*
* Copyright © 2007 Red Hat, Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
* Authors:
* Dave Airlie <airlied@redhat.com>
*
*/
#ifndef DRMMODE_DISPLAY_H
#define DRMMODE_DISPLAY_H
#include "xf86drmMode.h"
#ifdef CONFIG_UDEV_KMS
#include "libudev.h"
#endif
#include "dumb_bo.h"
struct gbm_device;
typedef struct {
struct dumb_bo *dumb;
#ifdef GLAMOR_HAS_GBM
struct gbm_bo *gbm;
#endif
} drmmode_bo;
typedef struct {
int fd;
unsigned fb_id;
drmModeFBPtr mode_fb;
int cpp;
int kbpp;
ScrnInfoPtr scrn;
struct gbm_device *gbm;
#ifdef CONFIG_UDEV_KMS
struct udev_monitor *uevent_monitor;
InputHandlerProc uevent_handler;
#endif
drmEventContext event_context;
drmmode_bo front_bo;
Bool sw_cursor;
/* Broken-out options. */
OptionInfoPtr Options;
Bool glamor;
Bool shadow_enable;
Bool shadow_enable2;
/** Is Option "PageFlip" enabled? */
Bool pageflip;
Bool force_24_32;
void *shadow_fb;
void *shadow_fb2;
DevPrivateKeyRec pixmapPrivateKeyRec;
Bool reverse_prime_offload_mode;
Bool is_secondary;
PixmapPtr fbcon_pixmap;
Bool dri2_flipping;
Bool present_flipping;
} drmmode_rec, *drmmode_ptr;
typedef struct {
drmmode_ptr drmmode;
drmModeCrtcPtr mode_crtc;
uint32_t vblank_pipe;
int dpms_mode;
struct dumb_bo *cursor_bo;
Bool cursor_up;
uint16_t lut_r[256], lut_g[256], lut_b[256];
drmmode_bo rotate_bo;
unsigned rotate_fb_id;
PixmapPtr prime_pixmap;
modesetting: Implement PRIME syncing as a sink Implements (Enable/Disable)SharedPixmapFlipping and SharedPixmapNotifyDamage, the sink functions for PRIME synchronization and double buffering. Allows modesetting driver to be used as a sink with PRIME synchronization. Changes dispatch_slave_dirty to flush damage from both scanout pixmaps. Changes drmmode_set_scanout_pixmap*() functions to drmmode_set_target_scanout_pixmap*() that take an additional parameter PixmapPtr *target. Then, treat *target as it did prime_pixmap. This allows me to use it to explicitly set both prime_pixmap and prime_pixmap_back individually. drmmode_set_scanout_pixmap() without the extra parameter remains to cover the single-buffered case, but only works if we aren't already double buffered. driver.c: Add plumbing for rr(Enable/Disable)SharedPixmapFlipping and SharedPixmapNotifyDamage. Change dispatch_dirty_crtc to dispatch_dirty_pixmap, which functions the same but flushes damage associated with a ppriv instead of the crtc, and chanage dispatch_slave_dirty to use it on both scanout pixmaps if applicable. drmmode_display.h: Add flip_seq field to msPixmapPrivRec to keep track of the event handler associated with a given pixmap, if any. Add wait_for_damage field to msPixmapPrivRec to keep track if we have requested a damage notification from the source. Add enable_flipping field to drmmode_crtc_private_rec to keep track if flipping is enabled or disabled. Add prime_pixmap_back to drmmode_crtc_private_rec to keep track of back buffer internally. Add declarations for drmmode_SetupPageFlipFence(), drmmode_EnableSharedPixmapFlipping(), drmmode_DisableSharedPixmapFlipping, drmmode_SharedPixmapFlip(), and drmmode_SharedPixmapPresentOnVBlank(). Move slave damage from crtc to ppriv. drmmode_display.c: Change drmmode_set_scanout_pixmap*() functions to drmmode_set_target_scanout_pixmap*() that take an additional parameter PixmapPtr *target for explicitly setting different scanout pixmaps. Add definitions for functions drmmode_SharedPixmapFlip(), drmmode_SharedPixmapPresentOnVBlank(), drmmode_SharedPixmapPresent(), drmmode_SharedPixmapVBlankEventHandler(), drmmode_SharedPixmapVBlankEventAbort(), drmmode_EnableSharedPixmapFlipping(), and drmmode_DisableSharedPixmapFlipping, drmmode_InitSharedPixmapFlipping(), and drmmode_FiniSharedPixmapFlipping, along with struct vblank_event_args. The control flow is as follows: pScrPriv->rrEnableSharedPixmapFlipping() makes its way to drmmode_EnableSharedPixmapFlipping(), which sets enable_flipping to TRUE and sets both scanout pixmaps prime_pixmap and prime_pixmap_back. When setting a mode, if prime_pixmap is defined, modesetting driver will call drmmode_InitSharedPixmapFlipping(), which if flipping is enabled will call drmmode_SharedPixmapPresent() on scanout_pixmap_back. drmmode_SharedPixmapPresent() requests that for the source to present on the given buffer using master->PresentSharedPixmap(). If it succeeds, it will then attempt to flip to that buffer using drmmode_SharedPixmapFlip(). Flipping shouldn't fail, but if it does, it will raise a warning and try drmmode_SharedPixmapPresent() again on the next vblank using drmmode_SharedPixmapPresentOnVBlank(). master->PresentSharedPixmap() could fail, in most cases because there is no outstanding damage on the mscreenpix tracked by the shared pixmap. In this case, drmmode_SharedPixmapPresent() will attempt to use master->RequestSharedPixmapNotifyDamage() to request for the source driver to call slave->SharedPixmapNotifyDamage() in response to damage on mscreenpix. This will ultimately call into drmmode_SharedPixmapPresentOnVBlank() to retry drmmode_SharedPixmapPresent() on the next vblank after accumulating damage. drmmode_SharedPixmapFlip() sets up page flip event handler by packing struct vblank_event_args with the necessary parameters, and registering drmmode_SharedPixmapVBlankEventHandler() and drmmode_SharedPixmapVBlankEventAbort() with the modesetting DRM event handler queue. Then, it uses the drmModePageFlip() to flip on the next vblank and raise an event. drmmode_SharedPixmapPresentOnVBlank() operates similarly to drmmode_SharedPixmapFlip(), but uses drmWaitVBlank() instead of drmModePageFlip() to raise the event without flipping. On the next vblank, DRM will raise an event that will ultimately be handled by drmmode_SharedPixmapVBlankEventHandler(). If we flipped, it will update prime_pixmap and prime_pixmap_back to reflect that frontTarget is now being displayed, and use drmmode_SharedPixmapPresent(backTarget) to start the process again on the now-hidden shared pixmap. If we didn't flip, it will just use drmmode_SharedPixmapPresent(frontTarget) to start the process again on the still-hidden shared pixmap. Note that presentation generally happens asynchronously, so with these changes alone tearing is reduced, but we can't always guarantee that the present will finish before the flip. These changes are meant to be paired with changes to the sink DRM driver that makes flips wait on fences attached to dmabuf backed buffers. The source driver is responsible for attaching the fences and signaling them when presentation is finished. Note that because presentation is requested in response to a vblank, PRIME sources will now conform to the sink's refresh rate. At teardown, pScrPriv->rrDisableSharedPixmapFlipping() will be called, making its way to drmmode_FiniSharedPixmapFlipping(). There, the event handlers for prime_pixmap and prime_pixmap_back are aborted, freeing the left over parameter structure. Then, prime_pixmap and prime_pixmap back are unset as scanout pixmaps. Register and tear down slave damage per-scanout pixmap instead of per-crtc. v1: Initial commit v2: Renamed PresentTrackedFlippingPixmap to PresentSharedPixmap Renamed flipSeq to flip_seq Warn if flip failed Use SharedPixmapNotifyDamage to retry on next vblank after damage v3: Refactor to accomodate moving (rr)StartFlippingPixmapTracking and (rr)(Enable/Disable)SharedPixmapFlipping to rrScrPrivRec from ScreenRec Do damage tracking on both scanout pixmaps v4: Tweaks to commit message v5: Revise for internal storage of prime pixmap ptrs Move disabling for reverse PRIME from source commit to here Use drmmode_set_target_scanout_pixmap*() to set scanout pixmaps internally to EnableSharedPixmapFlipping(). Don't support flipping if ms->drmmode.pageflip == FALSE. Move flipping_active check to this commit v6: Rebase onto ToT v7: Unchanged Reviewed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Alex Goins <agoins@nvidia.com>
2016-06-16 20:06:52 -07:00
PixmapPtr prime_pixmap_back;
unsigned prime_pixmap_x;
/**
* @{ MSC (vblank count) handling for the PRESENT extension.
*
* The kernel's vblank counters are 32 bits and apparently full of
* lies, and we need to give a reliable 64-bit msc for GL, so we
* have to track and convert to a userland-tracked 64-bit msc.
*/
int32_t vblank_offset;
uint32_t msc_prev;
uint64_t msc_high;
/** @} */
Bool need_modeset;
modesetting: Implement PRIME syncing as a sink Implements (Enable/Disable)SharedPixmapFlipping and SharedPixmapNotifyDamage, the sink functions for PRIME synchronization and double buffering. Allows modesetting driver to be used as a sink with PRIME synchronization. Changes dispatch_slave_dirty to flush damage from both scanout pixmaps. Changes drmmode_set_scanout_pixmap*() functions to drmmode_set_target_scanout_pixmap*() that take an additional parameter PixmapPtr *target. Then, treat *target as it did prime_pixmap. This allows me to use it to explicitly set both prime_pixmap and prime_pixmap_back individually. drmmode_set_scanout_pixmap() without the extra parameter remains to cover the single-buffered case, but only works if we aren't already double buffered. driver.c: Add plumbing for rr(Enable/Disable)SharedPixmapFlipping and SharedPixmapNotifyDamage. Change dispatch_dirty_crtc to dispatch_dirty_pixmap, which functions the same but flushes damage associated with a ppriv instead of the crtc, and chanage dispatch_slave_dirty to use it on both scanout pixmaps if applicable. drmmode_display.h: Add flip_seq field to msPixmapPrivRec to keep track of the event handler associated with a given pixmap, if any. Add wait_for_damage field to msPixmapPrivRec to keep track if we have requested a damage notification from the source. Add enable_flipping field to drmmode_crtc_private_rec to keep track if flipping is enabled or disabled. Add prime_pixmap_back to drmmode_crtc_private_rec to keep track of back buffer internally. Add declarations for drmmode_SetupPageFlipFence(), drmmode_EnableSharedPixmapFlipping(), drmmode_DisableSharedPixmapFlipping, drmmode_SharedPixmapFlip(), and drmmode_SharedPixmapPresentOnVBlank(). Move slave damage from crtc to ppriv. drmmode_display.c: Change drmmode_set_scanout_pixmap*() functions to drmmode_set_target_scanout_pixmap*() that take an additional parameter PixmapPtr *target for explicitly setting different scanout pixmaps. Add definitions for functions drmmode_SharedPixmapFlip(), drmmode_SharedPixmapPresentOnVBlank(), drmmode_SharedPixmapPresent(), drmmode_SharedPixmapVBlankEventHandler(), drmmode_SharedPixmapVBlankEventAbort(), drmmode_EnableSharedPixmapFlipping(), and drmmode_DisableSharedPixmapFlipping, drmmode_InitSharedPixmapFlipping(), and drmmode_FiniSharedPixmapFlipping, along with struct vblank_event_args. The control flow is as follows: pScrPriv->rrEnableSharedPixmapFlipping() makes its way to drmmode_EnableSharedPixmapFlipping(), which sets enable_flipping to TRUE and sets both scanout pixmaps prime_pixmap and prime_pixmap_back. When setting a mode, if prime_pixmap is defined, modesetting driver will call drmmode_InitSharedPixmapFlipping(), which if flipping is enabled will call drmmode_SharedPixmapPresent() on scanout_pixmap_back. drmmode_SharedPixmapPresent() requests that for the source to present on the given buffer using master->PresentSharedPixmap(). If it succeeds, it will then attempt to flip to that buffer using drmmode_SharedPixmapFlip(). Flipping shouldn't fail, but if it does, it will raise a warning and try drmmode_SharedPixmapPresent() again on the next vblank using drmmode_SharedPixmapPresentOnVBlank(). master->PresentSharedPixmap() could fail, in most cases because there is no outstanding damage on the mscreenpix tracked by the shared pixmap. In this case, drmmode_SharedPixmapPresent() will attempt to use master->RequestSharedPixmapNotifyDamage() to request for the source driver to call slave->SharedPixmapNotifyDamage() in response to damage on mscreenpix. This will ultimately call into drmmode_SharedPixmapPresentOnVBlank() to retry drmmode_SharedPixmapPresent() on the next vblank after accumulating damage. drmmode_SharedPixmapFlip() sets up page flip event handler by packing struct vblank_event_args with the necessary parameters, and registering drmmode_SharedPixmapVBlankEventHandler() and drmmode_SharedPixmapVBlankEventAbort() with the modesetting DRM event handler queue. Then, it uses the drmModePageFlip() to flip on the next vblank and raise an event. drmmode_SharedPixmapPresentOnVBlank() operates similarly to drmmode_SharedPixmapFlip(), but uses drmWaitVBlank() instead of drmModePageFlip() to raise the event without flipping. On the next vblank, DRM will raise an event that will ultimately be handled by drmmode_SharedPixmapVBlankEventHandler(). If we flipped, it will update prime_pixmap and prime_pixmap_back to reflect that frontTarget is now being displayed, and use drmmode_SharedPixmapPresent(backTarget) to start the process again on the now-hidden shared pixmap. If we didn't flip, it will just use drmmode_SharedPixmapPresent(frontTarget) to start the process again on the still-hidden shared pixmap. Note that presentation generally happens asynchronously, so with these changes alone tearing is reduced, but we can't always guarantee that the present will finish before the flip. These changes are meant to be paired with changes to the sink DRM driver that makes flips wait on fences attached to dmabuf backed buffers. The source driver is responsible for attaching the fences and signaling them when presentation is finished. Note that because presentation is requested in response to a vblank, PRIME sources will now conform to the sink's refresh rate. At teardown, pScrPriv->rrDisableSharedPixmapFlipping() will be called, making its way to drmmode_FiniSharedPixmapFlipping(). There, the event handlers for prime_pixmap and prime_pixmap_back are aborted, freeing the left over parameter structure. Then, prime_pixmap and prime_pixmap back are unset as scanout pixmaps. Register and tear down slave damage per-scanout pixmap instead of per-crtc. v1: Initial commit v2: Renamed PresentTrackedFlippingPixmap to PresentSharedPixmap Renamed flipSeq to flip_seq Warn if flip failed Use SharedPixmapNotifyDamage to retry on next vblank after damage v3: Refactor to accomodate moving (rr)StartFlippingPixmapTracking and (rr)(Enable/Disable)SharedPixmapFlipping to rrScrPrivRec from ScreenRec Do damage tracking on both scanout pixmaps v4: Tweaks to commit message v5: Revise for internal storage of prime pixmap ptrs Move disabling for reverse PRIME from source commit to here Use drmmode_set_target_scanout_pixmap*() to set scanout pixmaps internally to EnableSharedPixmapFlipping(). Don't support flipping if ms->drmmode.pageflip == FALSE. Move flipping_active check to this commit v6: Rebase onto ToT v7: Unchanged Reviewed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Alex Goins <agoins@nvidia.com>
2016-06-16 20:06:52 -07:00
Bool enable_flipping;
Bool flipping_active;
} drmmode_crtc_private_rec, *drmmode_crtc_private_ptr;
typedef struct {
drmModePropertyPtr mode_prop;
uint64_t value;
int num_atoms; /* if range prop, num_atoms == 1; if enum prop, num_atoms == num_enums + 1 */
Atom *atoms;
} drmmode_prop_rec, *drmmode_prop_ptr;
typedef struct {
drmmode_ptr drmmode;
int output_id;
drmModeConnectorPtr mode_output;
drmModeEncoderPtr *mode_encoders;
drmModePropertyBlobPtr edid_blob;
drmModePropertyBlobPtr tile_blob;
int dpms_enum_id;
int num_props;
drmmode_prop_ptr props;
int enc_mask;
int enc_clone_mask;
} drmmode_output_private_rec, *drmmode_output_private_ptr;
typedef struct _msPixmapPriv {
uint32_t fb_id;
struct dumb_bo *backing_bo; /* if this pixmap is backed by a dumb bo */
modesetting: Implement PRIME syncing as a sink Implements (Enable/Disable)SharedPixmapFlipping and SharedPixmapNotifyDamage, the sink functions for PRIME synchronization and double buffering. Allows modesetting driver to be used as a sink with PRIME synchronization. Changes dispatch_slave_dirty to flush damage from both scanout pixmaps. Changes drmmode_set_scanout_pixmap*() functions to drmmode_set_target_scanout_pixmap*() that take an additional parameter PixmapPtr *target. Then, treat *target as it did prime_pixmap. This allows me to use it to explicitly set both prime_pixmap and prime_pixmap_back individually. drmmode_set_scanout_pixmap() without the extra parameter remains to cover the single-buffered case, but only works if we aren't already double buffered. driver.c: Add plumbing for rr(Enable/Disable)SharedPixmapFlipping and SharedPixmapNotifyDamage. Change dispatch_dirty_crtc to dispatch_dirty_pixmap, which functions the same but flushes damage associated with a ppriv instead of the crtc, and chanage dispatch_slave_dirty to use it on both scanout pixmaps if applicable. drmmode_display.h: Add flip_seq field to msPixmapPrivRec to keep track of the event handler associated with a given pixmap, if any. Add wait_for_damage field to msPixmapPrivRec to keep track if we have requested a damage notification from the source. Add enable_flipping field to drmmode_crtc_private_rec to keep track if flipping is enabled or disabled. Add prime_pixmap_back to drmmode_crtc_private_rec to keep track of back buffer internally. Add declarations for drmmode_SetupPageFlipFence(), drmmode_EnableSharedPixmapFlipping(), drmmode_DisableSharedPixmapFlipping, drmmode_SharedPixmapFlip(), and drmmode_SharedPixmapPresentOnVBlank(). Move slave damage from crtc to ppriv. drmmode_display.c: Change drmmode_set_scanout_pixmap*() functions to drmmode_set_target_scanout_pixmap*() that take an additional parameter PixmapPtr *target for explicitly setting different scanout pixmaps. Add definitions for functions drmmode_SharedPixmapFlip(), drmmode_SharedPixmapPresentOnVBlank(), drmmode_SharedPixmapPresent(), drmmode_SharedPixmapVBlankEventHandler(), drmmode_SharedPixmapVBlankEventAbort(), drmmode_EnableSharedPixmapFlipping(), and drmmode_DisableSharedPixmapFlipping, drmmode_InitSharedPixmapFlipping(), and drmmode_FiniSharedPixmapFlipping, along with struct vblank_event_args. The control flow is as follows: pScrPriv->rrEnableSharedPixmapFlipping() makes its way to drmmode_EnableSharedPixmapFlipping(), which sets enable_flipping to TRUE and sets both scanout pixmaps prime_pixmap and prime_pixmap_back. When setting a mode, if prime_pixmap is defined, modesetting driver will call drmmode_InitSharedPixmapFlipping(), which if flipping is enabled will call drmmode_SharedPixmapPresent() on scanout_pixmap_back. drmmode_SharedPixmapPresent() requests that for the source to present on the given buffer using master->PresentSharedPixmap(). If it succeeds, it will then attempt to flip to that buffer using drmmode_SharedPixmapFlip(). Flipping shouldn't fail, but if it does, it will raise a warning and try drmmode_SharedPixmapPresent() again on the next vblank using drmmode_SharedPixmapPresentOnVBlank(). master->PresentSharedPixmap() could fail, in most cases because there is no outstanding damage on the mscreenpix tracked by the shared pixmap. In this case, drmmode_SharedPixmapPresent() will attempt to use master->RequestSharedPixmapNotifyDamage() to request for the source driver to call slave->SharedPixmapNotifyDamage() in response to damage on mscreenpix. This will ultimately call into drmmode_SharedPixmapPresentOnVBlank() to retry drmmode_SharedPixmapPresent() on the next vblank after accumulating damage. drmmode_SharedPixmapFlip() sets up page flip event handler by packing struct vblank_event_args with the necessary parameters, and registering drmmode_SharedPixmapVBlankEventHandler() and drmmode_SharedPixmapVBlankEventAbort() with the modesetting DRM event handler queue. Then, it uses the drmModePageFlip() to flip on the next vblank and raise an event. drmmode_SharedPixmapPresentOnVBlank() operates similarly to drmmode_SharedPixmapFlip(), but uses drmWaitVBlank() instead of drmModePageFlip() to raise the event without flipping. On the next vblank, DRM will raise an event that will ultimately be handled by drmmode_SharedPixmapVBlankEventHandler(). If we flipped, it will update prime_pixmap and prime_pixmap_back to reflect that frontTarget is now being displayed, and use drmmode_SharedPixmapPresent(backTarget) to start the process again on the now-hidden shared pixmap. If we didn't flip, it will just use drmmode_SharedPixmapPresent(frontTarget) to start the process again on the still-hidden shared pixmap. Note that presentation generally happens asynchronously, so with these changes alone tearing is reduced, but we can't always guarantee that the present will finish before the flip. These changes are meant to be paired with changes to the sink DRM driver that makes flips wait on fences attached to dmabuf backed buffers. The source driver is responsible for attaching the fences and signaling them when presentation is finished. Note that because presentation is requested in response to a vblank, PRIME sources will now conform to the sink's refresh rate. At teardown, pScrPriv->rrDisableSharedPixmapFlipping() will be called, making its way to drmmode_FiniSharedPixmapFlipping(). There, the event handlers for prime_pixmap and prime_pixmap_back are aborted, freeing the left over parameter structure. Then, prime_pixmap and prime_pixmap back are unset as scanout pixmaps. Register and tear down slave damage per-scanout pixmap instead of per-crtc. v1: Initial commit v2: Renamed PresentTrackedFlippingPixmap to PresentSharedPixmap Renamed flipSeq to flip_seq Warn if flip failed Use SharedPixmapNotifyDamage to retry on next vblank after damage v3: Refactor to accomodate moving (rr)StartFlippingPixmapTracking and (rr)(Enable/Disable)SharedPixmapFlipping to rrScrPrivRec from ScreenRec Do damage tracking on both scanout pixmaps v4: Tweaks to commit message v5: Revise for internal storage of prime pixmap ptrs Move disabling for reverse PRIME from source commit to here Use drmmode_set_target_scanout_pixmap*() to set scanout pixmaps internally to EnableSharedPixmapFlipping(). Don't support flipping if ms->drmmode.pageflip == FALSE. Move flipping_active check to this commit v6: Rebase onto ToT v7: Unchanged Reviewed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Alex Goins <agoins@nvidia.com>
2016-06-16 20:06:52 -07:00
DamagePtr slave_damage;
/** Sink fields for flipping shared pixmaps */
modesetting: Implement PRIME syncing as a sink Implements (Enable/Disable)SharedPixmapFlipping and SharedPixmapNotifyDamage, the sink functions for PRIME synchronization and double buffering. Allows modesetting driver to be used as a sink with PRIME synchronization. Changes dispatch_slave_dirty to flush damage from both scanout pixmaps. Changes drmmode_set_scanout_pixmap*() functions to drmmode_set_target_scanout_pixmap*() that take an additional parameter PixmapPtr *target. Then, treat *target as it did prime_pixmap. This allows me to use it to explicitly set both prime_pixmap and prime_pixmap_back individually. drmmode_set_scanout_pixmap() without the extra parameter remains to cover the single-buffered case, but only works if we aren't already double buffered. driver.c: Add plumbing for rr(Enable/Disable)SharedPixmapFlipping and SharedPixmapNotifyDamage. Change dispatch_dirty_crtc to dispatch_dirty_pixmap, which functions the same but flushes damage associated with a ppriv instead of the crtc, and chanage dispatch_slave_dirty to use it on both scanout pixmaps if applicable. drmmode_display.h: Add flip_seq field to msPixmapPrivRec to keep track of the event handler associated with a given pixmap, if any. Add wait_for_damage field to msPixmapPrivRec to keep track if we have requested a damage notification from the source. Add enable_flipping field to drmmode_crtc_private_rec to keep track if flipping is enabled or disabled. Add prime_pixmap_back to drmmode_crtc_private_rec to keep track of back buffer internally. Add declarations for drmmode_SetupPageFlipFence(), drmmode_EnableSharedPixmapFlipping(), drmmode_DisableSharedPixmapFlipping, drmmode_SharedPixmapFlip(), and drmmode_SharedPixmapPresentOnVBlank(). Move slave damage from crtc to ppriv. drmmode_display.c: Change drmmode_set_scanout_pixmap*() functions to drmmode_set_target_scanout_pixmap*() that take an additional parameter PixmapPtr *target for explicitly setting different scanout pixmaps. Add definitions for functions drmmode_SharedPixmapFlip(), drmmode_SharedPixmapPresentOnVBlank(), drmmode_SharedPixmapPresent(), drmmode_SharedPixmapVBlankEventHandler(), drmmode_SharedPixmapVBlankEventAbort(), drmmode_EnableSharedPixmapFlipping(), and drmmode_DisableSharedPixmapFlipping, drmmode_InitSharedPixmapFlipping(), and drmmode_FiniSharedPixmapFlipping, along with struct vblank_event_args. The control flow is as follows: pScrPriv->rrEnableSharedPixmapFlipping() makes its way to drmmode_EnableSharedPixmapFlipping(), which sets enable_flipping to TRUE and sets both scanout pixmaps prime_pixmap and prime_pixmap_back. When setting a mode, if prime_pixmap is defined, modesetting driver will call drmmode_InitSharedPixmapFlipping(), which if flipping is enabled will call drmmode_SharedPixmapPresent() on scanout_pixmap_back. drmmode_SharedPixmapPresent() requests that for the source to present on the given buffer using master->PresentSharedPixmap(). If it succeeds, it will then attempt to flip to that buffer using drmmode_SharedPixmapFlip(). Flipping shouldn't fail, but if it does, it will raise a warning and try drmmode_SharedPixmapPresent() again on the next vblank using drmmode_SharedPixmapPresentOnVBlank(). master->PresentSharedPixmap() could fail, in most cases because there is no outstanding damage on the mscreenpix tracked by the shared pixmap. In this case, drmmode_SharedPixmapPresent() will attempt to use master->RequestSharedPixmapNotifyDamage() to request for the source driver to call slave->SharedPixmapNotifyDamage() in response to damage on mscreenpix. This will ultimately call into drmmode_SharedPixmapPresentOnVBlank() to retry drmmode_SharedPixmapPresent() on the next vblank after accumulating damage. drmmode_SharedPixmapFlip() sets up page flip event handler by packing struct vblank_event_args with the necessary parameters, and registering drmmode_SharedPixmapVBlankEventHandler() and drmmode_SharedPixmapVBlankEventAbort() with the modesetting DRM event handler queue. Then, it uses the drmModePageFlip() to flip on the next vblank and raise an event. drmmode_SharedPixmapPresentOnVBlank() operates similarly to drmmode_SharedPixmapFlip(), but uses drmWaitVBlank() instead of drmModePageFlip() to raise the event without flipping. On the next vblank, DRM will raise an event that will ultimately be handled by drmmode_SharedPixmapVBlankEventHandler(). If we flipped, it will update prime_pixmap and prime_pixmap_back to reflect that frontTarget is now being displayed, and use drmmode_SharedPixmapPresent(backTarget) to start the process again on the now-hidden shared pixmap. If we didn't flip, it will just use drmmode_SharedPixmapPresent(frontTarget) to start the process again on the still-hidden shared pixmap. Note that presentation generally happens asynchronously, so with these changes alone tearing is reduced, but we can't always guarantee that the present will finish before the flip. These changes are meant to be paired with changes to the sink DRM driver that makes flips wait on fences attached to dmabuf backed buffers. The source driver is responsible for attaching the fences and signaling them when presentation is finished. Note that because presentation is requested in response to a vblank, PRIME sources will now conform to the sink's refresh rate. At teardown, pScrPriv->rrDisableSharedPixmapFlipping() will be called, making its way to drmmode_FiniSharedPixmapFlipping(). There, the event handlers for prime_pixmap and prime_pixmap_back are aborted, freeing the left over parameter structure. Then, prime_pixmap and prime_pixmap back are unset as scanout pixmaps. Register and tear down slave damage per-scanout pixmap instead of per-crtc. v1: Initial commit v2: Renamed PresentTrackedFlippingPixmap to PresentSharedPixmap Renamed flipSeq to flip_seq Warn if flip failed Use SharedPixmapNotifyDamage to retry on next vblank after damage v3: Refactor to accomodate moving (rr)StartFlippingPixmapTracking and (rr)(Enable/Disable)SharedPixmapFlipping to rrScrPrivRec from ScreenRec Do damage tracking on both scanout pixmaps v4: Tweaks to commit message v5: Revise for internal storage of prime pixmap ptrs Move disabling for reverse PRIME from source commit to here Use drmmode_set_target_scanout_pixmap*() to set scanout pixmaps internally to EnableSharedPixmapFlipping(). Don't support flipping if ms->drmmode.pageflip == FALSE. Move flipping_active check to this commit v6: Rebase onto ToT v7: Unchanged Reviewed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Alex Goins <agoins@nvidia.com>
2016-06-16 20:06:52 -07:00
int flip_seq; /* seq of current page flip event handler */
Bool wait_for_damage; /* if we have requested damage notification from source */
/** Source fields for flipping shared pixmaps */
Bool defer_dirty_update; /* if we want to manually update */
PixmapDirtyUpdatePtr dirty; /* cached dirty ent to avoid searching list */
PixmapPtr slave_src; /* if we exported shared pixmap, dirty tracking src */
Bool notify_on_damage; /* if sink has requested damage notification */
} msPixmapPrivRec, *msPixmapPrivPtr;
extern DevPrivateKeyRec msPixmapPrivateKeyRec;
#define msPixmapPrivateKey (&msPixmapPrivateKeyRec)
#define msGetPixmapPriv(drmmode, p) ((msPixmapPrivPtr)dixGetPrivateAddr(&(p)->devPrivates, &(drmmode)->pixmapPrivateKeyRec))
int drmmode_bo_destroy(drmmode_ptr drmmode, drmmode_bo *bo);
uint32_t drmmode_bo_get_pitch(drmmode_bo *bo);
uint32_t drmmode_bo_get_handle(drmmode_bo *bo);
Bool drmmode_glamor_handle_new_screen_pixmap(drmmode_ptr drmmode);
void *drmmode_map_slave_bo(drmmode_ptr drmmode, msPixmapPrivPtr ppriv);
Bool drmmode_SetSlaveBO(PixmapPtr ppix,
drmmode_ptr drmmode,
int fd_handle, int pitch, int size);
modesetting: Implement PRIME syncing as a sink Implements (Enable/Disable)SharedPixmapFlipping and SharedPixmapNotifyDamage, the sink functions for PRIME synchronization and double buffering. Allows modesetting driver to be used as a sink with PRIME synchronization. Changes dispatch_slave_dirty to flush damage from both scanout pixmaps. Changes drmmode_set_scanout_pixmap*() functions to drmmode_set_target_scanout_pixmap*() that take an additional parameter PixmapPtr *target. Then, treat *target as it did prime_pixmap. This allows me to use it to explicitly set both prime_pixmap and prime_pixmap_back individually. drmmode_set_scanout_pixmap() without the extra parameter remains to cover the single-buffered case, but only works if we aren't already double buffered. driver.c: Add plumbing for rr(Enable/Disable)SharedPixmapFlipping and SharedPixmapNotifyDamage. Change dispatch_dirty_crtc to dispatch_dirty_pixmap, which functions the same but flushes damage associated with a ppriv instead of the crtc, and chanage dispatch_slave_dirty to use it on both scanout pixmaps if applicable. drmmode_display.h: Add flip_seq field to msPixmapPrivRec to keep track of the event handler associated with a given pixmap, if any. Add wait_for_damage field to msPixmapPrivRec to keep track if we have requested a damage notification from the source. Add enable_flipping field to drmmode_crtc_private_rec to keep track if flipping is enabled or disabled. Add prime_pixmap_back to drmmode_crtc_private_rec to keep track of back buffer internally. Add declarations for drmmode_SetupPageFlipFence(), drmmode_EnableSharedPixmapFlipping(), drmmode_DisableSharedPixmapFlipping, drmmode_SharedPixmapFlip(), and drmmode_SharedPixmapPresentOnVBlank(). Move slave damage from crtc to ppriv. drmmode_display.c: Change drmmode_set_scanout_pixmap*() functions to drmmode_set_target_scanout_pixmap*() that take an additional parameter PixmapPtr *target for explicitly setting different scanout pixmaps. Add definitions for functions drmmode_SharedPixmapFlip(), drmmode_SharedPixmapPresentOnVBlank(), drmmode_SharedPixmapPresent(), drmmode_SharedPixmapVBlankEventHandler(), drmmode_SharedPixmapVBlankEventAbort(), drmmode_EnableSharedPixmapFlipping(), and drmmode_DisableSharedPixmapFlipping, drmmode_InitSharedPixmapFlipping(), and drmmode_FiniSharedPixmapFlipping, along with struct vblank_event_args. The control flow is as follows: pScrPriv->rrEnableSharedPixmapFlipping() makes its way to drmmode_EnableSharedPixmapFlipping(), which sets enable_flipping to TRUE and sets both scanout pixmaps prime_pixmap and prime_pixmap_back. When setting a mode, if prime_pixmap is defined, modesetting driver will call drmmode_InitSharedPixmapFlipping(), which if flipping is enabled will call drmmode_SharedPixmapPresent() on scanout_pixmap_back. drmmode_SharedPixmapPresent() requests that for the source to present on the given buffer using master->PresentSharedPixmap(). If it succeeds, it will then attempt to flip to that buffer using drmmode_SharedPixmapFlip(). Flipping shouldn't fail, but if it does, it will raise a warning and try drmmode_SharedPixmapPresent() again on the next vblank using drmmode_SharedPixmapPresentOnVBlank(). master->PresentSharedPixmap() could fail, in most cases because there is no outstanding damage on the mscreenpix tracked by the shared pixmap. In this case, drmmode_SharedPixmapPresent() will attempt to use master->RequestSharedPixmapNotifyDamage() to request for the source driver to call slave->SharedPixmapNotifyDamage() in response to damage on mscreenpix. This will ultimately call into drmmode_SharedPixmapPresentOnVBlank() to retry drmmode_SharedPixmapPresent() on the next vblank after accumulating damage. drmmode_SharedPixmapFlip() sets up page flip event handler by packing struct vblank_event_args with the necessary parameters, and registering drmmode_SharedPixmapVBlankEventHandler() and drmmode_SharedPixmapVBlankEventAbort() with the modesetting DRM event handler queue. Then, it uses the drmModePageFlip() to flip on the next vblank and raise an event. drmmode_SharedPixmapPresentOnVBlank() operates similarly to drmmode_SharedPixmapFlip(), but uses drmWaitVBlank() instead of drmModePageFlip() to raise the event without flipping. On the next vblank, DRM will raise an event that will ultimately be handled by drmmode_SharedPixmapVBlankEventHandler(). If we flipped, it will update prime_pixmap and prime_pixmap_back to reflect that frontTarget is now being displayed, and use drmmode_SharedPixmapPresent(backTarget) to start the process again on the now-hidden shared pixmap. If we didn't flip, it will just use drmmode_SharedPixmapPresent(frontTarget) to start the process again on the still-hidden shared pixmap. Note that presentation generally happens asynchronously, so with these changes alone tearing is reduced, but we can't always guarantee that the present will finish before the flip. These changes are meant to be paired with changes to the sink DRM driver that makes flips wait on fences attached to dmabuf backed buffers. The source driver is responsible for attaching the fences and signaling them when presentation is finished. Note that because presentation is requested in response to a vblank, PRIME sources will now conform to the sink's refresh rate. At teardown, pScrPriv->rrDisableSharedPixmapFlipping() will be called, making its way to drmmode_FiniSharedPixmapFlipping(). There, the event handlers for prime_pixmap and prime_pixmap_back are aborted, freeing the left over parameter structure. Then, prime_pixmap and prime_pixmap back are unset as scanout pixmaps. Register and tear down slave damage per-scanout pixmap instead of per-crtc. v1: Initial commit v2: Renamed PresentTrackedFlippingPixmap to PresentSharedPixmap Renamed flipSeq to flip_seq Warn if flip failed Use SharedPixmapNotifyDamage to retry on next vblank after damage v3: Refactor to accomodate moving (rr)StartFlippingPixmapTracking and (rr)(Enable/Disable)SharedPixmapFlipping to rrScrPrivRec from ScreenRec Do damage tracking on both scanout pixmaps v4: Tweaks to commit message v5: Revise for internal storage of prime pixmap ptrs Move disabling for reverse PRIME from source commit to here Use drmmode_set_target_scanout_pixmap*() to set scanout pixmaps internally to EnableSharedPixmapFlipping(). Don't support flipping if ms->drmmode.pageflip == FALSE. Move flipping_active check to this commit v6: Rebase onto ToT v7: Unchanged Reviewed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Alex Goins <agoins@nvidia.com>
2016-06-16 20:06:52 -07:00
Bool drmmode_EnableSharedPixmapFlipping(xf86CrtcPtr crtc, drmmode_ptr drmmode,
PixmapPtr front, PixmapPtr back);
Bool drmmode_SharedPixmapPresentOnVBlank(PixmapPtr frontTarget, xf86CrtcPtr crtc,
drmmode_ptr drmmode);
Bool drmmode_SharedPixmapFlip(PixmapPtr frontTarget, xf86CrtcPtr crtc,
drmmode_ptr drmmode);
void drmmode_DisableSharedPixmapFlipping(xf86CrtcPtr crtc, drmmode_ptr drmmode);
extern Bool drmmode_pre_init(ScrnInfoPtr pScrn, drmmode_ptr drmmode, int cpp);
void drmmode_adjust_frame(ScrnInfoPtr pScrn, drmmode_ptr drmmode, int x, int y);
extern Bool drmmode_set_desired_modes(ScrnInfoPtr pScrn, drmmode_ptr drmmode, Bool set_hw);
extern Bool drmmode_setup_colormap(ScreenPtr pScreen, ScrnInfoPtr pScrn);
extern void drmmode_uevent_init(ScrnInfoPtr scrn, drmmode_ptr drmmode);
extern void drmmode_uevent_fini(ScrnInfoPtr scrn, drmmode_ptr drmmode);
Bool drmmode_create_initial_bos(ScrnInfoPtr pScrn, drmmode_ptr drmmode);
void *drmmode_map_front_bo(drmmode_ptr drmmode);
Bool drmmode_map_cursor_bos(ScrnInfoPtr pScrn, drmmode_ptr drmmode);
void drmmode_free_bos(ScrnInfoPtr pScrn, drmmode_ptr drmmode);
void drmmode_get_default_bpp(ScrnInfoPtr pScrn, drmmode_ptr drmmmode,
int *depth, int *bpp);
void drmmode_copy_fb(ScrnInfoPtr pScrn, drmmode_ptr drmmode);
#ifndef DRM_CAP_DUMB_PREFERRED_DEPTH
#define DRM_CAP_DUMB_PREFERRED_DEPTH 3
#endif
#ifndef DRM_CAP_DUMB_PREFER_SHADOW
#define DRM_CAP_DUMB_PREFER_SHADOW 4
#endif
#define MS_ARRAY_SIZE(x) (sizeof(x)/sizeof(x[0]))
#endif