Remove mode origins. Add preferred mode count.

Switched from identifying source of mode line to listing which modes are
preferred by each output. This enables better CRTC sharing by making modes
less arbitrarily different.

randr.h

@@ -36,6 +36,7 @@ typedef unsigned short	XRandrRotation;
 typedef unsigned short	XRandrSizeID;
 typedef unsigned short	XRandrSubpixelOrder;
 typedef unsigned long	XRandrModeFlags;
+typedef unsigned long	XRandrOutputOptions;
 
 #define RANDR_NAME		"RANDR"
 #define RANDR_MAJOR		1
@@ -132,12 +133,6 @@ typedef unsigned long	XRandrModeFlags;
 #define BadRRCrtc		1
 #define BadRRMode		2
 
-#define RRModeOriginMonitor	0
-#define RRModeOriginVESA	1
-#define RRModeOriginConfig	2
-#define RRModeOriginUser	3
-#define RRModeOriginOther	4
-
 #define RROutputOptionScaleNone		1
 #define RROutputOptionScaleMaxAspect	2
 #define RROutputOptionScaleMax		4

randrproto.h

@@ -48,7 +48,6 @@
 #define RRCrtc CARD32
 #define RRModeFlags CARD32
 #define RROutputOptions CARD32
-#define RRModeOrigin CARD8
 
 #define Rotation CARD16
 #define SizeID CARD16
@@ -196,11 +195,8 @@ typedef struct _xRRModeInfo {
     CARD16		vTotal B16;
     CARD16		nameLength B16;
     RRModeFlags		modeFlags B32;
-    RRModeOrigin	origin;
-    CARD8		pad1;
-    CARD16		pad2 B16;
 } xRRModeInfo;
-#define sz_xRRModeInfo		    44
+#define sz_xRRModeInfo		    40
 
 typedef struct {
     RROutput		output B32;
@@ -289,9 +285,9 @@ typedef struct {
     CARD8	subpixelOrder;
     CARD16	nCrtcs B16;
     CARD16	nModes B16;
+    CARD16	nPreferred B16;
     CARD16	nClones B16;
     CARD16	nameLength B16;
-    CARD16	pad1 B16;
     RROutputOptions possibleOptions B32;
 } xRRGetOutputInfoReply;
 #define sz_xRRGetOutputInfoReply	36
@@ -378,7 +374,7 @@ typedef struct {
     Window	window B32;
     xRRModeInfo	modeInfo;
 } xRRCreateModeReq; 
-#define sz_xRRCreateModeReq		52
+#define sz_xRRCreateModeReq		48
 
 typedef struct {
     BYTE	type;
@@ -601,7 +597,10 @@ typedef struct {
 } xRROutputPropertyNotifyEvent;
 #define sz_xRROUtputPropertyNotifyEvent	32
 
-
+#undef RROutputOptions
+#undef RRModeFlags
+#undef RRCrtc
+#undef RRMode
 #undef RROutput
 #undef RRMode
 #undef RRCrtc

randrproto.txt

@@ -242,13 +242,6 @@ SIZEID { CARD16 }
 
 MODE { XID or None }
 
-OUTPUTPREFERENCE { RROutputPreferencePreferred,
-		   RROutputPreferenceMonitor,
-		   RROutputPreference
-		   
-OUTPUTMODE { mode: MODE,
-	     preference: OUTPUTPREFERENCE }
-
 CRTC { XID }
 
 OUTPUT { XID }
@@ -300,8 +293,7 @@ MODEINFO { id: MODE
            dotClock: CARD32
            hSyncStart, hSyncEnd, hTotal, hSkew: CARD16
            vSyncStart, vSyncEnd, vTotal: CARD16
-           modeFlags: SETofMODEFLAG
+           modeFlags: SETofMODEFLAG }
-	   modeOrigin: MODEORIGIN }
 
 OUTPUTCONFIG { output: OUTPUT
 	       options: SETofOUTPUTOPTION }
@@ -570,7 +562,8 @@ dynamic changes in the display environment.
 	possible-options: SETofOUTPUTOPTION
 	crtcs: LISTofCRTC
 	clones: LISTofOUTPUT
-	modes: LISTofOUTPUTMODE
+	modes: LISTofOUTPUT
+	num-preferred: CARD16
 └───
 	Errors: Output
 
@@ -616,6 +609,10 @@ dynamic changes in the display environment.
 	connect this output to a CRTC not using one of these modes results
 	in a Match error.
 
+	The first 'num-preferred' modes in 'modes' are preferred by the
+	monitor in some way; for fixed-pixel devices, this would generally
+	indicate which modes match the resolution of the output device.
+
 ┌───
     RRListOutputProperties
     	output:OUTPUT
@@ -1178,18 +1175,7 @@ A.1 Common Types
 	Return status for requests which depend on time.
 	
 ┌───
-    RRMODEORIGIN
+    MODEINFO (40)				Added in version 1.2
-	0	RRModeOriginPreferred
-	1	RRModeOriginDetailed
-	2	RRModeOriginVESA
-	3	RRModeOriginConfig
-	4	RRModeOriginUser
-	5	RRModeOriginOther
-└───
-	Origin of mode information.
-
-┌───
-    MODEINFO (44)				Added in version 1.2
 	4	CARD32		id
 	2	CARD16		width in pixels
 	2	CARD16		height in pixels
@@ -1205,8 +1191,6 @@ A.1 Common Types
 	2	CARD16		v total
 	2	CARD16		name length
 	4	SETofMODEFLAG	mode flags
-	1	MODEORIGIN	mode origin
-	3			unused
 └───
 	
 	An output mode specifies the complete CRTC timings for
@@ -1249,7 +1233,7 @@ A.1 Common Types
 ┌───
     OUTPUTCONFIG
     	4	CARD32		output
-	4	CARD32		set of output options
+	4	OUTPUTOPTION	set of output options
 └───
 
 
@@ -1383,7 +1367,7 @@ A.2.1 Protocol Requests added with version 1.2
 	1	1			Reply
 	1				unused
 	2	CARD16			sequence number
-	4	c+o+11m+(b+p)/4		reply length
+	4	c+o+10m+(b+p)/4		reply length
 	4	TIMESTAMP		timestamp
 	4	TIMESTAMP		config-timestamp
 	2	c			number of CRTCs
@@ -1393,7 +1377,7 @@ A.2.1 Protocol Requests added with version 1.2
 	8				unused
 	4c	LISTofCRTC		crtcs
 	4o	LISTofOUTPUT		outputs
-	44m	LISTofMODEINFO		modeinfos
+	40m	LISTofMODEINFO		modeinfos
 	b	STRING8			mode names
 	p				unused, p=pad(b)
 └───
@@ -1416,9 +1400,9 @@ A.2.1 Protocol Requests added with version 1.2
 	1	SUBPIXELORDER		subpixel-order
 	2	c			number of CRTCs
 	2	m			number of modes
+	2	p			number of preferred modes
 	2	o			number of clones
 	2	n			length of name
-	2				unused
 	4	SETofOUTPUTOPTION	supported output options
 	4c	LISTofCRTC		crtcs
 	4m	LISTofMODE		modes
@@ -1508,9 +1492,9 @@ A.2.1 Protocol Requests added with version 1.2
     RRCreateMode
 	1	CARD8			major opcode
 	1	14			RandR opcode
-	2	13+(n+p)/4		length
+	2	12+(n+p)/4		length
 	4	WINDOW			window
-	44	MODEINFO		mode
+	40	MODEINFO		mode
 	n	STRING8			mode name
 	p				unused, p=pad(n)
       ▶